Istvan Gódor

(Former)

51 - 100 out of 256Page size: 50

Research output

  1. 2014
  2. Published

    Tribological Contact Loadings of Sealing Materials

    Hausberger, A., Krampl, H., Godor, I., Grün, F. & Schwarz, T., 2014, Proceedings of 19th International Colloquium Tribology. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Tribological investigations of journal bearings by means of a close to component test methodology

    Bergmann, P., Summer, F., Grün, F., Godor, I., Offenbecher, M. & Lainé, E., 2014, Tribologie in Industrie und Forschung. Werkstoffe, Konstruktion und Technologie. Vortragsunterlagen. p. 113-121

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Tribological performance of forged steel and cast iron crankshafts on model scale

    Summer, F., Grün, F., Schiffer, J., Gódor, I. & Papadimitriou, I., 2014, 5th World Tribology Congress, WTC 2013. Vol. 3. p. 2155-2158 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Tribometric performance of polymer overlays by contrast with other bearing materials

    Summer, F., Grün, F., Godor, I., Offenbecher, M. & Lainé, E., 2014, Symposium 2014 - Tribologie in Industrie und Forschung. p. 159-166

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Untersuchung des Vorspannkraftverlusts dynamisch beanspruchter selbstfurchender Schrauben

    Kainzinger, P., Garb, C. & Godor, I., 2014, VDI Berichte 2239. p. 95-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. 2013
  8. Published

    Applicability of ring-on-disc and pin-on-plate test methods for Cu-steel and Al-steel systems for large area conformal contacts

    Pondicherry, K. S., Grün, F., Gódor, I., Bertram, R. & Offenbecher, M., Apr 2013, In: Lubrication science. 25, 3, p. 231-247 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Applicability of Ring-on-Disc and Pin-on-Plate Test Methods for Cu-Steel and Al-Steel Systems for Lare Area Conformal Contacts

    Pondicherry, K., Grün, F., Godor, I., Bertram, R. & Offenbecher, M., 2013, In: Lubrication science. p. 1-1

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    BERECHNUNGSANSATZ FÜR REIBDAUERERMÜDUNG

    Christiner, T., Reiser, J., Maier, B., Grün, F., Godor, I., Trieb, F., Stühlinger, R. & Herbst, K., 2013, In: Automobiltechnische Zeitschrift : ATZ . 115, 12, p. 1000-1006

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Calculation Approach for the Assessment of Fretting

    Christiner, T., Reiser, J., Maier, B., Grün, F., Godor, I., Trieb, F., Stühlinger, R. & Herbst, K., 2013, In: ATZ worldwide. 115, 12, p. 39-43

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Comprehensive Study of ZDDP-tribofilms Formed under Soft Contact Conditions

    Pondicherry, K., Grün, F., Summer, F., Godor, I., Lainé, E. & Offenbecher, M., 2013, Proceedings of 5th World Tribology Congress (WTC). p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Contact fatigue life and wear mechanisms of case hardened and nidrided steels

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2013, Proceedings of Baltmatrib 2013. p. 18-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Contact fatigue life investigation and wear mechanisms of gears

    Trausmuth, A., Godor, I. & Dietrich, A., 2013, ÖTG Symposium 2013. p. 169-178

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Contact fatigue life investigations and wear mechanisms of different case hardened surfaces under rolling contact loading for gears

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2013, VDI Berichte 2199.1. p. 497-509

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Damage oriented tribological model testing for internal combustion engines – Design of laboratory test strategies

    Grün, F., Godor, I., Schiffer, J., Trausmuth, A. & Krampl, H., 2013, In: Tribologie und Schmierungstechnik. 60, p. 5-12

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Investigations of Wear on System Camshaft/Tappet

    Wohlfahrt, M., Grün, F. & Godor, I., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Komponentenprüfung von Kegelrädern

    Wohlfahrt, M., Winter, G. & Godor, I., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Kontaktermüdung und Verschleiß von einsatzgehärteten Stählen und Nitrierschichten

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2013, Proceedings der Tribologie Fachtagung 2013 der Gesellschaft für Tribologie (GfT). p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Nano-Mechanical and Chemical Characterization of Tribofilms Formed Under Conformal Contact Conditions

    Pondicherry, K., Schöberl, T., Grün, F., Summer, F., Godor, I., Lainé, E. & Offenbecher, M., 2013, Proceedings of 68th Annual STLE Meeting. p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Optimization of the piston ring - cylinder liner system in gas-engines for power generation

    Schiffer, J., Krampl, H., Godor, I., Grün, F., Betz, M. & Laiminger, S., 2013, 27th CIMAC World Congress on Combustion Engine Technology. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Schadensanalyse eines Chippo Klingenhalters

    Mösenbacher, A., Leitner, M. & Godor, I., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    The fatigue endurance limit of a high strength CrNi steel in a fretting dominated regime

    Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2013, In: Tribology International. 59, p. 97-103

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Tribological performance of forged steel and cast iron crankshafts on model scale

    Summer, F., Grün, F., Schiffer, J., Godor, I. & Papadimitriou, I., 2013, World Tribology Congress 2013. p. 753-756

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Tribological performance of forged steel and cast iron crankshafts on model scale

    Summer, F., Grün, F., Schiffer, J., Godor, I. & Papadimitriou, I., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    Tribological test principles for power train applications

    Grün, F., Godor, I., Schiffer, J., Krampl, H. & Trausmuth, A., 2013, Proceedings of 2nd Oildoc Conference and Exhibition. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Tribometric Development Tools for Journal Bearings – a novel test adapter

    Grün, F., Krampl, H., Schiffer, J., Moder, J., Godor, I. & Offenbecher, M., 2013, Proceedings of 5th World Tribology Congress (WTC). p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Vom tribologischen Modellversuch zur Bauteilprüfung

    Hausberger, A., Godor, I., Grün, F., Pinter, G. & Schwarz, T., 2013, 22. Leobener Kunststoff-Kolloquium: Oberflächen und Grenzflächen in der Polymertechnologie. p. 150-157

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. 2012
  30. Published

    Tribological functionality of aluminium sliding materials with hard phases under lubricated conditions

    Grün, F., Summer, F., Pondicherry, K. S., Gódor, I., Offenbecher, M. & Lainé, E., 1 Dec 2012, In: Wear. 298-299.2013, 15 February, p. 127-134 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Comparison of Fatigue Behavior of Different Materials under Rolling Contact Fatigue

    Magritzer, M., Wohlfahrt, M., Guster, C., Godor, I. & Grün, F., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Cutter force measurement on tunnel boring machines - System design

    Entacher, M., Winter, G., Bumberger, T., Decker, K., Godor, I. & Galler, R., 2012, In: Tunnelling and Underground Space Technology. p. 97-106

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Damage oriented tribological model testing for internal combustion engines - Design of laboratory test strategies

    Grün, F., Godor, I., Schiffer, J., Pondicherry, K., Trausmuth, A. & Krampl, H., 2012, Technische Akademie Esslingen. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Design of test methodologies for fretting investigations

    Strohhäussl, B., Reiser, J., Godor, I. & Grün, F., 2012, 3rd Fatigue Symposium - Lightweight Design. p. 287-294

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Effect of counterpart material on the tribological performances of Al- and Cu-based sliding materials

    Summer, F., Grün, F., Pondicherry, K., Godor, I., Offenbecher, M. & Lainé, E., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. Published

    Effect of counterpart material on the tribological performances of Al- and Cu-based sliding materials

    Summer, F., Grün, F., Pondicherry, K., Godor, I., Offenbecher, M. & Lainé, E., 2012, 3rd Fatigue Symposium Leoben Conference Transcript. p. 311-314

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Fatigue Life Investigations of Different Case Hardened Specimens under Rolling Contact Loading for Gears

    Trausmuth, A., Godor, I., Stoschka, M., Dietrich, A., Grün, F. & Eichlseder, W., 2012, 3rd Fatigue Sypmposium. p. 295-310

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Fatigue Life Investigations of Differently Hardened Specimens in Lubricated Tribological Rolling Contacts

    Trausmuth, A., Godor, I., Grün, F., Stoschka, M., Dietrich, A. & Eichlseder, W., 2012, Technische Akademie Esslingen. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Fretting fatigue, its influence on the fatigue endurance limit and palliative measures against fretting.

    Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2012, Fretting Fatigue Fatigue de Contact: Experimentations, Modelisationes et Startegies Palliatives. p. 103-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Fretting Wear and Fretting Fatigue influencing the material properties of a high strenght CrNi steel

    Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2012, Book of abstracts 15th Nordic Symposium on Tribology, 2012. p. 21-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Influence of Fretting on the fatigue endurance limit

    Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2012, Coference Transcript, 3rd Fatigue Symosium Leoben. p. 279-286

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Measurement of Cutting Forces on Tunnel Boring Machines

    Entacher, M., Winter, G., Bumberger, T., Godor, I. & Galler, R., 2012, 3rd Fatigue Symposium - Lightweight Design. p. 352-371

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Numerical and experimental investigation of non-conformal lubricated contects

    Krampl, H., Grün, F. & Godor, I., 2012, Nordic Symposium on Tribology. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Optimierung geschmierter Tribokontakte auf Basis tribometrischer und numerischer Untersuchungen

    Krampl, H., Grün, F. & Godor, I., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    Rechnerische und experimentelle Untersuchung der Schmierfilmbildung in Tribokontakten mittels kommerzieller Softwarepakete

    Krampl, H., Grün, F. & Godor, I., 2012, In: Tribologie und Schmierungstechnik. 59, p. 7-12

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Simulation of tribological functionality of heterogeneous tribomaterials

    Grün, F., Godor, I., Sailer, W. & Gänser, H.-P., 2012, In: Tribology International. 46, p. 119-127

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Synergy between secondary phases in aluminium based tribomaterials and lubrucant additives

    Pondicherry, K., Grün, F., Summer, F., Godor, I., Lainé, E. & Offenbecher, M., 2012, 15th Nordic Symposium on Tribology. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    The fatigue behaviour of a high strength CrNi- steel regarding fretting fatigue

    Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2012,

    Proceedings of the ASME 2012 Pressure Vessels & Piping Division Conference

    .     p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Tribological funtionality of aluminium sliding materials with hard phases under lubricated conditions

    Grün, F., Summer, F., Pondicherry, K., Godor, I., Lainé, E. & Offenbecher, M., 2012, In: Wear. p. 127-134

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Tribological testing of lubricated mechanical contacts

    Grün, F., Godor, I., Schiffer, J., Krampl, H. & Pondicherry, K., 2012, 3rd Fatigue Sypmposium. p. 266-267

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Visualization of the processes taking place in the contact zone with in-situ tribometry

    Grün, F., Sailer, W. & Godor, I., 2012, In: Tribology International. 48, p. 44-53

    Research output: Contribution to journal › Article › Research › peer-review

  52. 2011
  53. Published

    Aluminum Based Sliding Materials with Soft Phases-Intrinsic For-giving Overload Behavior?

    Grün, F., Gódor, I. & Eichlseder, W., 3 Feb 2011, Friction, Wear and Wear Protection: International Symposium on Friction, Wear and Wear Protection 2008 Aachen, Germany. Wiley-VCH , p. 45-51 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  54. Published

    AP3: Optimierung der Ventiltriebe von Großmotoren hinsichtlich Lebensdauer und Optimierung der Reibungsverluste

    Godor, I., Grün, F. & Magritzer, M., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1 2 3 4 5 6 Next
View graph of relations

Latest Research Output

View more (256)