Istvan Gódor

(Former)

1 - 256 out of 256Page size: 500

Research output

  1. 2022
  2. Published

    Tribological characterization of coatings for their suitability as protective coatings for rollers using two-disc model investigations

    Grün, F. & Gódor, I., 14 Jul 2022, 7th World Tribology Congress, WTC2022, Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. 2021
  4. Published

    Phenomenological wear model of case-hardened 20MnCr5 under cyclic line rolling contact

    Trausmuth, A., Godor, I. & Grün, F., 15 Apr 2021, In: Wear. 470, 15 April, 16 p., 203607.

    Research output: Contribution to journal › Article › Research › peer-review

  5. 2020
  6. E-pub ahead of print

    Cumulative damage assessment of tribological durability limits

    Pusterhofer, M., Summer, F., Gódor, I. & Grün, F., 6 Jul 2020, (E-pub ahead of print) In: Wear. 456-457.2020, 15 September, 15 p., 203318.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Tribological investigations with near eutectic AlSi alloys found in engine vane pumps – Characterization of the material tribo-functionalities

    Summer, F., Pusterhofer, M., Grün, F. & Gódor, I., 1 Feb 2020, In: Tribology International. 146.2020, June, 13 p., 106236.

    Research output: Contribution to journal › Article › Research › peer-review

  8. 2019
  9. Published

    Damage models of different hardness layers subjected to point contact

    Trausmuth, A., Godor, I. & Grün, F., 15 Jul 2019, In: Wear. 430-431.2019, July, p. 157-168 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Novel model test configuration for investigation of cam/tappet contacts

    Grün, F., Gódor, I., Summer, F. & Moizan, S., 2019, p. 1-2.

    Research output: Contribution to conference › Abstract › peer-review

  11. 2018
  12. Published

    Evaluation of wear phenomena of journal bearings by close to component testing and application of a numerical wear assessment

    Bergmann, P., Grün, F., Summer, F. & Gódor, I., 26 Jul 2018, In: Lubricants. 2018, 3, 25 p., 65.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    AT516367 (B1) - Prüfstand und Prüfverfahren mit verstellbarem Achsabstand zwischen Übertragungsprüfkörpern

    Grun, F. (Inventor) & Gódor, I. (Inventor), 15 May 2018, IPC No. G01M13/02 (2006.01), Patent No. AT516367(B1), 15 May 2018, Priority date 18 Sept 2014, Priority No. A50659/2014

    Research output: Patent

  14. Published

    A modelling framework for the simulation of lubricated and dry line contacts

    Moder, J., Grün, F. & Gódor, I., 1 Apr 2018, In: Tribology International. 120, p. 34-46 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. E-pub ahead of print

    On the modelling of mixed lubrication of conformal contacts

    Bergmann, P., Grun, F., Gódor, I., Stadler, G. & Maier-Kiener, V., 26 Mar 2018, (E-pub ahead of print) In: Tribology International. 125.2018, September, p. 220-236 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. 2017
  17. Published

    CN107366570 (A) - TURBOCHARGER ASSEMBLY

    Hettinger, R. (Inventor), DAGUIN , F. (Inventor), BOILEAU , R. (Inventor), CAPELLI, M. (Inventor), Simon, P. (Inventor), GAINETON, N. (Inventor), BLUMENSCHEIN, E. (Inventor), REICHHART, M. (Inventor), Risch, G. (Inventor), Steinwender, L. (Inventor), Grun, F. (Inventor) & Gódor, I. (Inventor), 21 Nov 2017, IPC No. F01D25/16; F01D25/18; F01D25/24; F02B39/00; F02B39/14, Patent No. CN107366570 (A), Priority date 13 May 2016, Priority No. US201615154673

    Research output: Patent

  18. Published

    US10316742 (B2) - Turbocharger assembly

    Hettinger, R. (Inventor), DAGUIN , F. (Inventor), BOILEAU , R. (Inventor), CAPELLI, M. (Inventor), Simon, P. (Inventor), GAINETON, N. (Inventor), BLUMENSCHEIN, E. (Inventor), REICHHART, M. (Inventor), Risch, G. (Inventor), Steinwender, L. (Inventor), Grün, F. (Inventor) & Gódor, I. (Inventor), 16 Nov 2017, IPC No. F01D25/12; F01D25/16; F01D25/18; F01D25/24; F02B33/40; F02B39/14 , Patent No. US10316742 (B2), Priority date 13 May 2016, Priority No. US201615154673

    Research output: Patent

  19. Published

    US2017328273 (A1) - TURBOCHARGER ASSEMBLY

    Hettinger, R. (Inventor), DAGUIN , F. (Inventor), BOILEAU , R. (Inventor), CAPELLI, M. (Inventor), Simon, P. (Inventor), GAINETON, N. (Inventor), BLUMENSCHEIN, E. (Inventor), REICHHART, M. (Inventor), Risch, G. (Inventor), Steinwender, L. (Inventor), Grun, F. (Inventor) & Gódor, I. (Inventor), 16 Nov 2017, IPC No. F01D25/12; F01D25/16; F01D25/18; F01D25/24; F02B33/40; F02B39/14 , Patent No. US2017328273 (A1), Priority date 16 May 2016, Priority No. US201615154673

    Research output: Patent

  20. Published

    EP3244027 (A1) - TURBOCHARGER ASSEMBLY

    Hettinger, R. (Inventor), DAGUIN , F. (Inventor), BOILEAU , R. (Inventor), CAPELLI, M. (Inventor), Simon, P. (Inventor), GAINETON, N. (Inventor), BLUMENSCHEIN, E. (Inventor), REICHHART, M. (Inventor), Risch, G. (Inventor), Steinwender, L. (Inventor), Grun, F. (Inventor) & Gódor, I. (Inventor), 15 Nov 2017, IPC No. F01D25/16; F01D25/18; F02C6/12, Patent No. EP3244027 (A1), Priority date 13 May 2016, Priority No. EP20170166958

    Research output: Patent

  21. Published

    Expansion of the metrological visualization capability by the implementation of acoustic emission analysis

    Bergmann, P., Grün, F., Summer, F., Gódor, I. & Stadler, G., 1 Aug 2017, In: Advances in tribology. 2017, 17 p., 3718924.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    A Novel Two-Disc Machine for High Precision Friction Assessment

    Moder, J., Grün, F., Stoschka, M. & Gódor, I., 28 Jun 2017, In: Advances in tribology. 2017, 1, 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    In-situ Testing of Wear and Fatigue on Gear Segments

    Grun, F., Koblmiller, T., Gódor, I. & Schadler, W., 2017, Proceedings of the 6th World Tribology Congress. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Novel Gear Test Methodology to evaluate efficiency and durability

    Grun, F., Maier, B., Gódor, I. & Steinwender, F., 2017, Proceedings of the 6th European COnference on TRIBology. 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Tribologische Kontaktsimulation elastomerer Dichtungswerkstoffe

    Hausberger, A., Krampl, H., Grün, F., Gódor, I., Pinter, G. G. & Schwarz, T., 2017, In: Tribologie und Schmierungstechnik. 64.2017, 1, p. 15-24 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Untersuchung der lokalen Reibungsmechanismen von Polymer-Glas kontakten mittels in-situ Tribologie

    Stiller, T., Hausberger, A., Wang, C., Pinter, G. G., Gódor, I., Grun, F. & Schwarz, T., 2017, ÖTG 2017 Tagungsband. 2017, p. 55 68 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. 2016
  28. Published

    Journal bearing systems: Effect of lubricant viscosity on frictional losses and lifetime performance

    Summer, F., Grün, F., Godor, I., Offenbecher, M., Lainé, E. & Taylor, S., 23 Nov 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  29. Published

    Journal bearing systems: Effect of lubricant viscosity on frictional losses and lifetime performance

    Summer, F., Grün, F., Godor, I., Offenbecher, M., Lainé, E. & Taylor, S., 23 Nov 2016, Conference proceedings of ÖTG Symposium 2016. p. 127-134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    An elastohydrodynamic lubrication model considering surface roughness and mixed friction

    Moder, J., Grün, F. & Godor, I., 13 Oct 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Reibung und Verschleiß technischer Kunststoffe "Möglichkeiten und Herausforderungen"

    Hausberger, A., Godor, I., Grün, F. & Pinter, G., 1 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  32. Published

    Sind mittels laboratorischer Modellprüftechnik erzielte Ergebnisse verwertbar ?

    Grün, F., Godor, I., Moder, J., Bergmann, P. & Summer, F., 11 May 2016, p. 1-43.

    Research output: Contribution to conference › Presentation › Research

  33. Published

    Methodology development for numerical evaluation of wear in tribological contacts

    Moder, J., Bergmann, P., Grün, F. & Godor, I., 21 Apr 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  34. Published

    Methodology development for numerical evaluation of wear in tribological contacts

    Bergmann, P., Grün, F., Godor, I. & Herbst, K., 21 Apr 2016, The Publications of the MultiScience - XXX. microCAD International Multidisciplinary Scientific Conference University of Miskolc, 21-22 April, 2016. 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    AT516367 (A1) - Prüfstand und Prüfverfahren mit verstellbarem Achsabstand zwischen Übertragungsprüfkörpern

    Grun, F. (Inventor) & Gódor, I. (Inventor), 15 Apr 2016, IPC No. G01M13/02, Patent No. AT516367, 18 Jan 2018, Priority date 18 Sept 2014, Priority No. AT20140050659

    Research output: Patent

  36. Published

    DE102015115719 (A1) - Prüfstand und Prüfverfahren mit verstellbarem Achsabstand zwischen Übertragungsprüfkörpern

    Grun, F. (Inventor) & Gódor, I. (Inventor), 24 Mar 2016, IPC No. G01M13/02, Patent No. DE102015115719 (A1), Priority date 18 Sept 2014, Priority No. AT20140050659

    Research output: Patent

  37. Published

    Methodology development for numerical evaluation of wear in tribological contacts

    Bergmann, P., Grün, F., Godor, I. & Herbst, K., 2016, In: Design of Machines and Structures. 6, 1, p. 5-14 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Sind mittels laboratorischer Modellprüftechnik erzielte Ergebnisse verwertbar ?

    Grün, F., Godor, I., Moder, J., Bergmann, P. & Summer, F., 2016, Proceedings des DVM Arbeitskreises Zuverlässigkeit tribologischer Systeme. p. 1-43

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. 2015
  40. Published

    Tribological study of crankshaft bearing systems: Comparison of forged steel and cast iron counterparts under start–stop operation

    Summer, F., Grün, F., Schiffer, J., Godor, I. & Papadimitriou, I., 8 Jul 2015, In: Wear. 338-339, p. 232-241

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Simulative Investigations of a Close-to-Component Journal Bearing System and Comparison with Test Data

    Bergmann, P., Grün, F., Godor, I. & Hager, G., 5 Jun 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  42. Published

    Tribometric assessment of start stop journal bearing wear with the aid of a component close test methodology

    Summer, F., Grün, F., Godor, I., Offenbecher, M. & Lainé, E., 3 Jun 2015, Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Influence of Manufacturing Technology on the Loadability of Gear Systems

    Grün, F., Godor, I. & Dietrich, A., 17 Apr 2015, Proceedings of the European All-Wheel Drive Congress 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Contact Fatigue Life Investigation and Wear Mechanisms of Different Case Hardened and Nitrided Steels

    Trausmuth, A., Gódor, I. & Dietrich, A., 2015, Key engineering materials. 604 ed. Vol. 2014. p. 51-54 4 p. (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  45. Published

    Development of Ring on Disc Tests for Elastomeric Sealing Materials

    Hausberger, A., Grün, F., Godor, I., Pinter, G. & Schwarz, T., 2015, Proceedings of the International Tribology Conference 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Fretting tests for elastomeric sealing materials

    Hausberger, A., Godor, I., Schwarz, T., Berer, M. & Tockner, M., 2015.

    Research output: Contribution to conference › Poster › Research

  47. Published

    Technische Polymere für Tribo-Anwendungen Möglichkeiten und Herausforderungen

    Hausberger, A., Godor, I., Grün, F. & Pinter, G., 2015.

    Research output: Contribution to conference › Presentation › Research

  48. Published

    Tribological in-situ evaluation of lubricated contacts of real-life engineering materials

    Grün, F., Godor, I., Summer, F., Bergmann, P. & Moder, J., 2015, Proceedings of 3rd OilDoc Conference and Exhibition. Rosenheim

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. 2014
  50. Published

    Tribological modeltesting in powertrains

    Grün, F., Godor, I. & Krampl, H., 7 Nov 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  51. Published

    Contact fatigue life investigations and wear mechanisms of gears with different steels and hardening process

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2014, 5th World Tribology Congress, WTC 2013. Vol. 3. p. 2620-2623 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Development of a design and optimization method for high pressure components

    Müther, A., Maier, B., Godor, I., Christiner, T., Stühlinger, R. & Trieb, F., 2014, In: Design of Machines and Structures. 4, p. 33-43

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Efficient material development for elastomeric sealing materials via the correlation between tribological model tests and component testing

    Hausberger, A., Godor, I. & Grün, F., 2014, Book of Abstracts of Asiatrib 2014. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Investigations on the Tribological Behaviour of engineering polymers

    Schwab, M., Hausberger, A., Godor, I. & Pinter, G., 2014, 13th IMEKO TC15 Youth Symposium on Experimental Solid Mechanics 2014. p. 108-111 4 p. (13th IMEKO TC15 Youth Symposium on Experimental Solid Mechanics 2014).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014, Tribologie in Industrie und Forschung: Werkstoffe, Konstruktion und Technologie. p. 3-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014.

    Research output: Contribution to conference › Presentation › Research

  57. Published

    Methodology for Design and Evaluation of highly loaded Hertzian Contacts

    Grün, F., Krampl, H., Godor, I. & Trausmuth, A., 2014, Proceedings of 19th International Colloquium Tribology. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Optimierung tribologischer Testmethoden für die Dichtungstechnik

    Hausberger, A., Godor, I., Grün, F., Pinter, G. & Schwarz, T., 2014, Tribologie in Industrie und Forschung: Werkstoffe, Konstruktion und Technologie. p. 17-24

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Stellungnahme zur Schadensanalyse "Belag auf beständigem Material"

    Maier, B. & Godor, I., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  60. Published

    Tribological Contact Loadings of Sealing Materials

    Hausberger, A., Krampl, H., Godor, I., Grün, F. & Schwarz, T., 2014, Proceedings of 19th International Colloquium Tribology. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Tribological investigations of journal bearings by means of a close to component test methodology

    Bergmann, P., Summer, F., Grün, F., Godor, I., Offenbecher, M. & Lainé, E., 2014, Tribologie in Industrie und Forschung. Werkstoffe, Konstruktion und Technologie. Vortragsunterlagen. p. 113-121

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    Tribological performance of forged steel and cast iron crankshafts on model scale

    Summer, F., Grün, F., Schiffer, J., Gódor, I. & Papadimitriou, I., 2014, 5th World Tribology Congress, WTC 2013. Vol. 3. p. 2155-2158 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Tribometric performance of polymer overlays by contrast with other bearing materials

    Summer, F., Grün, F., Godor, I., Offenbecher, M. & Lainé, E., 2014, Symposium 2014 - Tribologie in Industrie und Forschung. p. 159-166

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Untersuchung des Vorspannkraftverlusts dynamisch beanspruchter selbstfurchender Schrauben

    Kainzinger, P., Garb, C. & Godor, I., 2014, VDI Berichte 2239. p. 95-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. 2013
  66. Published

    Applicability of ring-on-disc and pin-on-plate test methods for Cu-steel and Al-steel systems for large area conformal contacts

    Pondicherry, K. S., Grün, F., Gódor, I., Bertram, R. & Offenbecher, M., Apr 2013, In: Lubrication science. 25, 3, p. 231-247 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Applicability of Ring-on-Disc and Pin-on-Plate Test Methods for Cu-Steel and Al-Steel Systems for Lare Area Conformal Contacts

    Pondicherry, K., Grün, F., Godor, I., Bertram, R. & Offenbecher, M., 2013, In: Lubrication science. p. 1-1

    Research output: Contribution to journal › Article › Research › peer-review

  68. Published

    BERECHNUNGSANSATZ FÜR REIBDAUERERMÜDUNG

    Christiner, T., Reiser, J., Maier, B., Grün, F., Godor, I., Trieb, F., Stühlinger, R. & Herbst, K., 2013, In: Automobiltechnische Zeitschrift : ATZ . 115, 12, p. 1000-1006

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Calculation Approach for the Assessment of Fretting

    Christiner, T., Reiser, J., Maier, B., Grün, F., Godor, I., Trieb, F., Stühlinger, R. & Herbst, K., 2013, In: ATZ worldwide. 115, 12, p. 39-43

    Research output: Contribution to journal › Article › Research › peer-review

  70. Published

    Comprehensive Study of ZDDP-tribofilms Formed under Soft Contact Conditions

    Pondicherry, K., Grün, F., Summer, F., Godor, I., Lainé, E. & Offenbecher, M., 2013, Proceedings of 5th World Tribology Congress (WTC). p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Contact fatigue life and wear mechanisms of case hardened and nidrided steels

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2013, Proceedings of Baltmatrib 2013. p. 18-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Contact fatigue life investigation and wear mechanisms of gears

    Trausmuth, A., Godor, I. & Dietrich, A., 2013, ÖTG Symposium 2013. p. 169-178

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Contact fatigue life investigations and wear mechanisms of different case hardened surfaces under rolling contact loading for gears

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2013, VDI Berichte 2199.1. p. 497-509

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Damage oriented tribological model testing for internal combustion engines – Design of laboratory test strategies

    Grün, F., Godor, I., Schiffer, J., Trausmuth, A. & Krampl, H., 2013, In: Tribologie und Schmierungstechnik. 60, p. 5-12

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Investigations of Wear on System Camshaft/Tappet

    Wohlfahrt, M., Grün, F. & Godor, I., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  76. Published

    Komponentenprüfung von Kegelrädern

    Wohlfahrt, M., Winter, G. & Godor, I., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  77. Published

    Kontaktermüdung und Verschleiß von einsatzgehärteten Stählen und Nitrierschichten

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2013, Proceedings der Tribologie Fachtagung 2013 der Gesellschaft für Tribologie (GfT). p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Nano-Mechanical and Chemical Characterization of Tribofilms Formed Under Conformal Contact Conditions

    Pondicherry, K., Schöberl, T., Grün, F., Summer, F., Godor, I., Lainé, E. & Offenbecher, M., 2013, Proceedings of 68th Annual STLE Meeting. p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    Optimization of the piston ring - cylinder liner system in gas-engines for power generation

    Schiffer, J., Krampl, H., Godor, I., Grün, F., Betz, M. & Laiminger, S., 2013, 27th CIMAC World Congress on Combustion Engine Technology. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Schadensanalyse eines Chippo Klingenhalters

    Mösenbacher, A., Leitner, M. & Godor, I., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  81. Published

    The fatigue endurance limit of a high strength CrNi steel in a fretting dominated regime

    Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2013, In: Tribology International. 59, p. 97-103

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Tribological performance of forged steel and cast iron crankshafts on model scale

    Summer, F., Grün, F., Schiffer, J., Godor, I. & Papadimitriou, I., 2013, World Tribology Congress 2013. p. 753-756

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Tribological performance of forged steel and cast iron crankshafts on model scale

    Summer, F., Grün, F., Schiffer, J., Godor, I. & Papadimitriou, I., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  84. Published

    Tribological test principles for power train applications

    Grün, F., Godor, I., Schiffer, J., Krampl, H. & Trausmuth, A., 2013, Proceedings of 2nd Oildoc Conference and Exhibition. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Tribometric Development Tools for Journal Bearings – a novel test adapter

    Grün, F., Krampl, H., Schiffer, J., Moder, J., Godor, I. & Offenbecher, M., 2013, Proceedings of 5th World Tribology Congress (WTC). p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Vom tribologischen Modellversuch zur Bauteilprüfung

    Hausberger, A., Godor, I., Grün, F., Pinter, G. & Schwarz, T., 2013, 22. Leobener Kunststoff-Kolloquium: Oberflächen und Grenzflächen in der Polymertechnologie. p. 150-157

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. 2012
  88. Published

    Tribological functionality of aluminium sliding materials with hard phases under lubricated conditions

    Grün, F., Summer, F., Pondicherry, K. S., Gódor, I., Offenbecher, M. & Lainé, E., 1 Dec 2012, In: Wear. 298-299.2013, 15 February, p. 127-134 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Comparison of Fatigue Behavior of Different Materials under Rolling Contact Fatigue

    Magritzer, M., Wohlfahrt, M., Guster, C., Godor, I. & Grün, F., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  90. Published

    Cutter force measurement on tunnel boring machines - System design

    Entacher, M., Winter, G., Bumberger, T., Decker, K., Godor, I. & Galler, R., 2012, In: Tunnelling and Underground Space Technology. p. 97-106

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Damage oriented tribological model testing for internal combustion engines - Design of laboratory test strategies

    Grün, F., Godor, I., Schiffer, J., Pondicherry, K., Trausmuth, A. & Krampl, H., 2012, Technische Akademie Esslingen. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    Design of test methodologies for fretting investigations

    Strohhäussl, B., Reiser, J., Godor, I. & Grün, F., 2012, 3rd Fatigue Symposium - Lightweight Design. p. 287-294

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Effect of counterpart material on the tribological performances of Al- and Cu-based sliding materials

    Summer, F., Grün, F., Pondicherry, K., Godor, I., Offenbecher, M. & Lainé, E., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  94. Published

    Effect of counterpart material on the tribological performances of Al- and Cu-based sliding materials

    Summer, F., Grün, F., Pondicherry, K., Godor, I., Offenbecher, M. & Lainé, E., 2012, 3rd Fatigue Symposium Leoben Conference Transcript. p. 311-314

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Fatigue Life Investigations of Different Case Hardened Specimens under Rolling Contact Loading for Gears

    Trausmuth, A., Godor, I., Stoschka, M., Dietrich, A., Grün, F. & Eichlseder, W., 2012, 3rd Fatigue Sypmposium. p. 295-310

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Fatigue Life Investigations of Differently Hardened Specimens in Lubricated Tribological Rolling Contacts

    Trausmuth, A., Godor, I., Grün, F., Stoschka, M., Dietrich, A. & Eichlseder, W., 2012, Technische Akademie Esslingen. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Fretting fatigue, its influence on the fatigue endurance limit and palliative measures against fretting.

    Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2012, Fretting Fatigue Fatigue de Contact: Experimentations, Modelisationes et Startegies Palliatives. p. 103-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Fretting Wear and Fretting Fatigue influencing the material properties of a high strenght CrNi steel

    Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2012, Book of abstracts 15th Nordic Symposium on Tribology, 2012. p. 21-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    Influence of Fretting on the fatigue endurance limit

    Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2012, Coference Transcript, 3rd Fatigue Symosium Leoben. p. 279-286

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Measurement of Cutting Forces on Tunnel Boring Machines

    Entacher, M., Winter, G., Bumberger, T., Godor, I. & Galler, R., 2012, 3rd Fatigue Symposium - Lightweight Design. p. 352-371

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Numerical and experimental investigation of non-conformal lubricated contects

    Krampl, H., Grün, F. & Godor, I., 2012, Nordic Symposium on Tribology. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Optimierung geschmierter Tribokontakte auf Basis tribometrischer und numerischer Untersuchungen

    Krampl, H., Grün, F. & Godor, I., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  103. Published

    Rechnerische und experimentelle Untersuchung der Schmierfilmbildung in Tribokontakten mittels kommerzieller Softwarepakete

    Krampl, H., Grün, F. & Godor, I., 2012, In: Tribologie und Schmierungstechnik. 59, p. 7-12

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Simulation of tribological functionality of heterogeneous tribomaterials

    Grün, F., Godor, I., Sailer, W. & Gänser, H.-P., 2012, In: Tribology International. 46, p. 119-127

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Synergy between secondary phases in aluminium based tribomaterials and lubrucant additives

    Pondicherry, K., Grün, F., Summer, F., Godor, I., Lainé, E. & Offenbecher, M., 2012, 15th Nordic Symposium on Tribology. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  106. Published

    The fatigue behaviour of a high strength CrNi- steel regarding fretting fatigue

    Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2012,

    Proceedings of the ASME 2012 Pressure Vessels & Piping Division Conference

    .     p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  107. Published

    Tribological funtionality of aluminium sliding materials with hard phases under lubricated conditions

    Grün, F., Summer, F., Pondicherry, K., Godor, I., Lainé, E. & Offenbecher, M., 2012, In: Wear. p. 127-134

    Research output: Contribution to journal › Article › Research › peer-review

  108. Published

    Tribological testing of lubricated mechanical contacts

    Grün, F., Godor, I., Schiffer, J., Krampl, H. & Pondicherry, K., 2012, 3rd Fatigue Sypmposium. p. 266-267

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  109. Published

    Visualization of the processes taking place in the contact zone with in-situ tribometry

    Grün, F., Sailer, W. & Godor, I., 2012, In: Tribology International. 48, p. 44-53

    Research output: Contribution to journal › Article › Research › peer-review

  110. 2011
  111. Published

    Aluminum Based Sliding Materials with Soft Phases-Intrinsic For-giving Overload Behavior?

    Grün, F., Gódor, I. & Eichlseder, W., 3 Feb 2011, Friction, Wear and Wear Protection: International Symposium on Friction, Wear and Wear Protection 2008 Aachen, Germany. Wiley-VCH , p. 45-51 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  112. Published

    AP3: Optimierung der Ventiltriebe von Großmotoren hinsichtlich Lebensdauer und Optimierung der Reibungsverluste

    Godor, I., Grün, F. & Magritzer, M., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  113. Published

    Aspects of Fretting on the Fatigue Endurance Limit

    Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2011, ECOTRIB 2011. p. 417-420

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  114. Published

    Beitrag zur Lebensdaueruntersuchung von wälzbeanspruchten Härteschichten unterschiedlicher Stähle

    Trausmuth, A., Godor, I., Stoschka, M., Dietrich, A., Marsoner, S. & Eichlseder, W., 2011, Maschinenelemente Lager und Welle-Nabe-Verbindung. p. 335-351

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  115. Published

    Describing different operating regimes of journal bearing materials by pressure velocity diagrams derived from ring-on-disc model testing

    Grün, F., Godor, I., Gärtner, W. & Eichlseder, W., 2011, In: Proceedings of the Institution of Mechanical Engineers. Part J, Journal of engineering tribology. p. 617-626

    Research output: Contribution to journal › Article › Research › peer-review

  116. Published

    Fretting Fatigue and Wear: Experimental Investigations and Numerical Simulation

    Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2011, SAE World Congress, Paper No. 2011-01-0199. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  117. Published

    Interactions between heterogeneous aluminium sliding materials and lubricants

    Grün, F., Summer, F., Pondicherry, K., Godor, I., Lainé, E. & Offenbecher, M., 2011, Proceedings of ECOTRIB Conference 2011. p. 703-708

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  118. Published

    Load-carrying Capacity Prediction of Different Plasma Nitrided and Case hardened Specimens under Rolling Contact Loading

    Trausmuth, A., Lengauer, M., Godor, I., Stoschka, M., Dietrich, A. & Eichlseder, W., 2011, Quality in Heat Treatment. p. 143-153

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  119. Published

    Load-carrying Capacity Prediction of Different Plasma Nitrided, Case hardened and Quenched Specimens under Rolling Contact Loading

    Trausmuth, A., Godor, I., Stoschka, M., Dietrich, A. & Eichlseder, W., 2011, Tribosystems Reliability and Lifetime Assessment. p. 441-447

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  120. Published

    Microscopy study of tribofilms formed on lubricated surfaces under different contact conditions

    Pondicherry, K., Grün, F., Godor, I., Krampl, H., Lainé, E. & Offenbecher, M., 2011, Proceedings of ECOTRIB Conference 2011. p. 575-580

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  121. Published

    Novel methodology for the calculation of local loadings in lubricated heterogeneous tribosystems

    Krampl, H., Grün, F. & Godor, I., 2011, Proceedings of ECOTRIB Conference 2011. p. 709-714

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  122. Published

    Numerische Modellierung des Verformungszustandes hochbelasteter Abbauwerkzeuge von Tunnelbohrmaschinen

    Bumberger, T., Entacher, M., Winter, G., Godor, I. & Galler, R., 2011, Tagungsband "Berechnungsverfahren in der Geotechnik - Versagensmechanismen und Parameterentwicklung". p. 88-94

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  123. Published

    Numerische Modellierung des Verformungszustandes hochbelasteter Abbauwerkzeuge von Tunnelbohrmaschinen

    Bumberger, T., Entacher, M., Winter, G., Godor, I. & Galler, R., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. p. 492-497

    Research output: Contribution to journal › Article › Research › peer-review

  124. Published

    Rheologische Flüssigkeitsmodelle für Hertzsche Kontakte und deren messtechnische Validierung

    Krampl, H., Grün, F. & Godor, I., 2011, Proceedings Symposium 2011 der Österreichischen Tribologischen Gesellschaft. p. 97-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  125. Published

    The fatigue endurance limit of a high strength CrNi- steel in a fretting dominated regime

    Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2011, 38th LEEDS-LYON SYMPOSIUM ON TRIBOLOGY. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  126. Published

    Tribological performance of thin overlays for journal bearings

    Grün, F., Godor, I., Gärtner, W. & Eichlseder, W., 2011, In: Tribology International. 44, p. 1271-1280

    Research output: Contribution to journal › Article › Research › peer-review

  127. Published

    Tribologische Versuche an Gleitwerkstoffen

    Grün, F., Summer, F. & Godor, I., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  128. Published

    Tribologische Wirkungsweisen sekundärer Hart- und Weichphasen in geschmierten, aluminiumbasierten Gleitsystemen

    Summer, F., Grün, F., Pondicherry, K., Godor, I., Lainé, E. & Offenbecher, M., 2011, Proceedings Symposium 2011 der Österreichischen Tribologischen Gesellschaft. p. 57-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  129. Published

    Untersuchung der tribomechanischen und werkstoffphysikalischen Eiegnschaften an gefüllten und ungefüllten TPU-Modellwerkstoffen

    Hausberger, A., Strohhäussl, B., Summer, F., Godor, I. & Schwarz, T., 2011, Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen. p. 56/1-56/11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  130. Published

    Visualization of the processes taking place in the contact zone with in-situ tribometry

    Grün, F., Sailer, W. & Godor, I., 2011, In: Tribology International. p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  131. 2010
  132. Published

    Tribologische funktionsweise von ungefüllten und gefüllten TPU-dictungsmaterialen - Ein erfahrungsbericht

    Gódor, I., Schiffer, J., Grün, F., Major, Z. & Schwarz, T., 1 Dec 2010, In: Tribologie und Schmierungstechnik. 57, 4, p. 21-27 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  133. Published

    A Model Scale Test Method for the Piston Ring - Cylinder Liner Tribosystem of Internal Combustion Engines

    Schiffer, J., Godor, I., Grün, F. & Eichlseder, W., 2010, In: The archive of mechanical engineering : quarterly (Archiwum budowy maszyn). 57, p. 331-341

    Research output: Contribution to journal › Article › Research › peer-review

  134. Published

    Analyse der Schmierfilmbildung tribologischer Modellsysteme mithilfe kommerzieller Softwarepakete

    Krampl, H., Grün, F. & Godor, I., 2010, Wettbewerbsvorsprung durch tribologische Innovationen Beherrschung von Reibung und Verschleiß durch Oberflächen- u. Schmierstofftechnik. p. 127-136

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  135. Published

    Bewertung des tribologischen Verhaltens von unterschiedlich modifizierten Grauguss-Zylinderlaufbahnen auf Modellmaßstab

    Schiffer, J., Godor, I., Grün, F., Eichlseder, W., Dibiasi, W. & Strobl, V., 2010, Zylinderlaufbahn, Kolben, Pleuel - Innovative Systeme im vergleich; VDI-Berichte 2109. p. 297-300

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  136. Published

    Bewertung des tribologischen Verhaltens von unterschiedlich modifizierten Grauguß-Zylinderlaufbuchsen auf Modellmaßstab

    Schiffer, J., Godor, I., Grün, F., Eichlseder, W., Dibiasi, W. & Strobl, V., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  137. Published

    Characterization and simulation of tribological functionality of heterogeneous tribomaterials

    Grün, F., Godor, I., Sailer, W. & Schiffer, J., 2010, 37th Leeds-Lyon Symposium 2010 - Synopses. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  138. Published

    Combined numerical and experimental investigations on Fretting wear

    Christiner, T., Reiser, J., Godor, I., Maderbacher, H., Eichlseder, W., Trieb, F. & Stühlinger, R., 2010, In: Procedia Engineering. 2, p. 1173-1179

    Research output: Contribution to journal › Article › Research › peer-review

  139. Published

    Combined numerical and experimental investigations on Fretting Wear

    Christiner, T., Reiser, J., Maderbacher, H., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2010, Fatigue 2010 Book of Abstracts. p. 225-225

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  140. Published

    Design of a novel methodology for in-situ-investigation of contact conditions

    Sailer, W., Grün, F., Godor, I. & Gänser, H.-P., 2010, Design of a novel methodology for in-situ-investigation of contact conditions. p. 55-55

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  141. Published

    Elucidating the Differences between Ring-on-Disc and Pin-on-Plate Tribometric Test Approaches

    Pondicherry, K., Grün, F., Godor, I., Bertram, R. & Offenbecher, M., 2010, 37th Leeds-Lyon Symposium 2010 - Synopses. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  142. Published

    Experimental Definition of a Failure Model for the Tribological Behavior of PTFE Bronze Compounds

    Godor, I., Major, Z., Grün, F. & Vezer, S., 2010, In: Journal of tribology (Transactions of the ASME). p. 807-815

    Research output: Contribution to journal › Article › Research › peer-review

  143. Published

    Investigation of operating ranges for lubricated large-area contacts using ring-on-disc test configuration

    Grün, F., Godor, I., Gärtner, W. & Eichlseder, W., 2010, 14th Nordic Symposium on Tribology - Abstracts. p. 70-70

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  144. Published

    Investigation of tribological damage mechanisms of various slide bearing materials used in medium speed and low speed diesel engines on the microscopic and macroscopic scale

    Offenbecher, M., Gärtner, W., Gumpoldsberger, R., Aufischer, R., Grün, F. & Godor, I., 2010, Proceedings of CIMAC Congress 2010. p. 276/1-276/12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  145. Published

    Life fatigue prediction of different plasma nitrided and case hardened specimens under rolling contact loading

    Trausmuth, A., Godor, I., Stoschka, M., Haberer, C., Eichlseder, W. & Dietrich, A., 2010, Nitrieren und Nitrocarburieren. p. 140-149

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  146. Published

    Model scale generation and microscopic characterisation of tribofilms formed on Fe and Cu alloys

    Grün, F., Godor, I., Javidi, A., Pondicherry, K., Offenbecher, M. & Bertram, R., 2010, In: Lubrication science. 22, 6-7, p. 237-250

    Research output: Contribution to journal › Article › Research › peer-review

  147. Published

    Numerical approach to fretting wear

    Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2010, Water Jetting. p. 269-273

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  148. Published

    NUMERISCHER UND EXPERIMENTELLER ANSATZ ZUR FRETTINGBEWERTUNG: MATERIALABTRAG UND ERMÜDUNG

    Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2010, Reibung, Schmierung und Verschleiß. p. 50/1-50/11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  149. Published

    Rolling contact fatigue prediction of different plasma nitrided and case hardened specimens

    Eichlseder, W., Trausmuth, A., Godor, I. & Stoschka, M., 2010, Mechanical Engineering. p. 24-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  150. Published

    Schädigungsäquivalente Prüfmethodik für das Tribosystem Kolbenring-Zylinderlaufbahn von Großmotoren

    Schiffer, J., Godor, I., Grün, F. & Eichlseder, W., 2010, In: Tribologie und Schmierungstechnik. 57, p. 37-42

    Research output: Contribution to journal › Article › Research › peer-review

  151. Published

    TRAGFÄHIGKEITSUNTERSUCHUNGEN VON UNTERSCHIEDLICH GEHÄRTETEN WERKSTOFFE UNTER KONTAKTBEANSPRUCHUNG

    Trausmuth, A., Godor, I., Stoschka, M., Eichlseder, W. & Dietrich, A., 2010, Wettbewerbsvorsprung durch tribologische Innovation. p. 57-71

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  152. Published

    Tribological behaviour of unfilled and filled TPU materials

    Godor, I., Schiffer, J., Grün, F., Schwarz, T. & Major, Z., 2010, 14th Nordic Symposium on Tribology - Abstracts. p. 59-59

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  153. Published

    Tribologische Funktionsweise von ungefüllten und gefüllten TPU-Dichtungsmaterialien - ein Erfahrungsbericht

    Godor, I., Schiffer, J., Major, Z., Grün, F. & Schwarz, T., 2010, In: Tribologie und Schmierungstechnik. 57, p. 21-27

    Research output: Contribution to journal › Article › Research › peer-review

  154. Published

    Tribometrie von Grenzschichten in großflächigen Kontakten - Methodik zur Erzeugung von Tribofilmen und begleitende Analytik

    Grün, F., Godor, I., Javidi, A. & Pondicherry, K., 2010, In: Tribologie und Schmierungstechnik. 57, p. 5-11

    Research output: Contribution to journal › Article › Research › peer-review

  155. 2009
  156. Published

    Tribological investigation of elastomeric materials used in seal componentstle

    Gódor, I., Javidi, A., Strohhäussl, B., Summer, F. & Krampl, H., 1 Jan 2009, 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 261-262 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  157. Published

    Abschlussbericht Tribologie GE Jenbacher

    Schiffer, J. & Godor, I., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  158. Published

    Anwendung einer Prüfmethodik zur tribologischen Untersuchung des Systems Kolbenring-Zylinderlaufbahn von Großmotoren

    Schiffer, J., Godor, I., Grün, F., Krampl, H., Eichlseder, W., Dibiasi, W. & Strobl, V., 2009, Tribologie Fachtagung 2009: Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  159. Published

    Application of conductive AFM technique to measure electrical conductance of tribofilms

    Pondicherry, K., Beinik, I., Grün, F., Godor, I. & Teichert, C., 2009, Proceedings of 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 205-206

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  160. Published

    Application of conductive AFM technique to measure electrical conductance of tribofilms

    Pondicherry, K., Beinik, I., Grün, F., Godor, I. & Teichert, C., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  161. Published

    Charcterization of the tribological properties of polymer basis compounds in respect to component application

    Godor, I., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  162. Published

    Comparative studies of hardened surface layers under contact stress

    Trausmuth, A., Godor, I., Stoschka, M. & Eichlseder, W., 2009, Advances in Experimantal Mechanics. p. 263-264

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  163. Published

    Development of a Fretting Wear Parameter for Implementation of Wear in a Numerical Analysis

    Christiner, T., Godor, I., Kainzinger, P. & Eichlseder, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  164. Published

    Development of a Fretting Wear Parameter for Implementation of Wear in a Numerical Analysis

    Christiner, T., Godor, I., Kainzinger, P. & Eichlseder, W., 2009, 26th Symposium on Advances in Experimental Mechanics. p. 12-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  165. Published

    Development of a test methodology for the system piston ring - cylinder liner

    Schiffer, J., Godor, I., Grün, F. & Eichlseder, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  166. Published

    Development of a test methodology for the system piston ring - cylinder liner

    Schiffer, J., Godor, I., Grün, F. & Eichlseder, W., 2009, Proceedings of 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 199-200

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  167. Published

    Einige Gesetzmäßigkeiten über das tribologische Verhalten von ungefüllten und gefüllten TPU-Materialien

    Godor, I., Schiffer, J., Grün, F., Major, Z. & Schwarz, T., 2009, Tribologie Fachtagung 2009: Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  168. Published

    Entwicklung einer Untersuchungsmethodik zur Evaluierung des Fretting Widerstandes

    Reiser, J. (Editor), Christiner, T. (Editor) & Godor, I. (Editor), 2009, Wien: Österreichische Tribologische Gesellschaft.

    Research output: Book/Report › Anthology › Research

  169. Published

    Experimental definition of a failure model for the tribological behaviour of polytetrafluorethylene bronze compounds

    Godor, I., Major, Z., Vezér, S. & Grün, F., 2009, In: Proceedings of the Institution of Mechanical Engineers. Part J, Journal of engineering tribology. 223, p. 807-815

    Research output: Contribution to journal › Article › Research › peer-review

  170. Published

    Experimental methods to investigate the run-ning-in properties of soft coatings

    Grün, F., Godor, I. & Eichlseder, W., 2009, Proceedings of 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 273-274

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  171. Published

    Experimental methods to investigate the run-ning-in properties of soft coatings

    Grün, F., Godor, I. & Eichlseder, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  172. Published

    Experimental methods to investigate the running-in properties of soft coatings

    Grün, F., Gódor, I. & Eichlseder, W., 2009, 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 273-274 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  173. Published

    Fretting wear: Combined numerical and experimental investigations T.

    Christiner, T., Wohlfahrt, M., Reiser, J., Gänser, H.-P., Godor, I. & Eichlseder, W., 2009, MPA-2009 3rd International Meeting on Developments in Materials, Processes and Applications of Emerging Technologies. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  174. Published

    Fundamentals of optimizing Aluminium-based journal bearing materials

    Grün, F., Godor, I. & Eichlseder, W., 2009, In: Proceedings of the Institution of Mechanical Engineers. Part J, Journal of engineering tribology. 223, p. 777-785

    Research output: Contribution to journal › Article › Research › peer-review

  175. Published

    Funktionsweise und Gebrauchsdauer von Gleitlagerwerkstoffen

    Grün, F., Godor, I., Gärtner, W. & Eichlseder, W., 2009, Lebensdauer und Energieeffizienz. p. 127-135

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  176. Published

    Gleitlagerspezifische Werkstoffeigenschaften und ihre Charakterisierung (material properties specific to journal bearings and their characterisation)

    Gärtner, W., Grün, F. & Godor, I., 2009, VDI Bericht 2069. p. 197-208

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  177. Published

    Influence of overlays on the tribological behavior of journal bearing materials

    Grün, F., Godor, I., Gärtner, W. & Eichlseder, W., 2009, Proceedings of World Tribology Conference (WTC) 2009. p. 131-131

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  178. Published

    Influence of the microstructure on the tribological properties of TPU seal materials

    Godor, I., Grün, F., Major, Z., Hausberger, A. & Schwarz, T., 2009, Proceedings of European Polymer Congress, 2009. p. 197-197

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  179. Published

    Methode zur Berechnung der lokalen Zahnradlebensdauer am Beispiel Hypoidverzahnung

    Haberer, C., Dietrich, A., Godor, I., Leitner, M., Trausmuth, A. & Eichlseder, W., 2009, Lebensdauer und Energieeffizienz Herausforderungen im Maschinenbau und in der Schmierungstechnik. p. 67-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  180. Published

    New insight into tribofilm formation and its tribometric visualization

    Grün, F., Godor, I., Javidi, A. & Pondicherry, K., 2009, Proceedings of Europeen Conference on Tribology (Ecotrib) 2009. p. 541-546

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  181. Published

    Schädigungsäquivalente tribologische Untersuchungen zur Erhöhung der Zuverlässigkeit des Systems Kolbenring/Zylinderlaufbahn

    Schiffer, J., Godor, I., Grün, F., Dibiasi, W., Strobl, V. & Eichlseder, W., 2009, Lebensdauer und Energieeffizienz. p. 89-96

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  182. Published

    Towards understanding of interactions and layer formation between lubricated mating surfaces

    Pondicherry, K., Grün, F. & Godor, I., 2009, Lebensdauer und Energieeffizienz. p. 169-179

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  183. Published

    Tragfähigkeitssteigerung von Hypoidverzahnungen

    Haberer, C., Godor, I., Leitner, H., Eichlseder, W. & Dietrich, A., 2009, VDI Fachtagung Getriebe in Fahrzeugen 2009. p. 305-315

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  184. Published

    Tribological investigation of elastomeric materials used in seal components

    Godor, I., Javidi, A., Strohhäussl, B., Summer, F. & Krampl, H., 2009, Proceedings Danubia Adria Symposium DAS 2009. p. 261-262

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  185. Published

    Tribologische Eigenschaften von TPU-Modellmaterialien und ihre Anwen-dungsorientierte Charakterisierung

    Godor, I., Strohhäussl, B., Summer, F., Hausberger, A., Javidi, A. & Schwarz, T., 2009, Proceedings Symposium 2009 der Österreichischen Tribologischen Gesellschaft. p. 245-257

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  186. Published

    Tribologisches Verhalten einer Gleitschicht (1)

    Grün, F. & Godor, I., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  187. Published

    Tribologisches Verhalten einer Gleitschicht (2)

    Grün, F. & Godor, I., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  188. Published

    Tribologisches Verhalten einer Gleitschicht (3)

    Grün, F. & Godor, I., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  189. Published

    Tribologisches Verhalten einer Gleitschicht (4)

    Grün, F. & Godor, I., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  190. Published

    Tribologisches Verhalten einer Gleitschicht (5)

    Grün, F. & Godor, I., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  191. Published

    Tribologisches Verhalten eines Cu-Basis Gleitwerkstoffes

    Grün, F. & Godor, I., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  192. Published

    Vergleich der Lebensdauer von Kontaktbeanspruchten Werkstoffen unter Einsatzhärtung und Plasmanitrierung

    Trausmuth, A., Godor, I., Stoschka, M., Haberer, C., Dietrich, A. & Eichlseder, W., 2009, Lebensdauer und Energieeffizienz; Herausforderung im Maschinenbau und in der Schmierungstechnik. p. 145-157

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  193. Published

    Vergleichende Losreißversuche an einem tribologischen Ersatzmodell Block-on-Plate - Teil 2

    Grün, F., Sailer, W. & Godor, I., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  194. 2008
  195. Published

    A novel test methodology for optimizing metallic journal bearing materials

    Grün, F., Godor, I., Gärtner, W. & Eichlseder, W., 2008, Nordtrib 2008; 13th Nordic Symposium on Tribology. p. 1-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  196. Published

    Charakterisierung von tribologischen Grenzschichten mittels Rasterelektronenmikroskopie

    Grün, F., Godor, I. & Sailer, W., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  197. Published

    Designing Test Methods and Deriving the Events Taking Place in Differently Designed Tribomaterials

    Grün, F., Godor, I. & Eichlseder, W., 2008, Lubricants, Materials and Lubrication Engineering. p. 76-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  198. Published

    Friction Behaviour of Unfilled and Filled TPU

    Godor, I., Major, Z., Hausberger, A. & Schiffer, J., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  199. Published

    Fricton behavior of unfilled and filled thermoplastic polyurethane materials

    Godor, I., Grün, F. & Major, Z., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  200. Published

    Methodik zur in-situ Messung der Interaktionen zwischen Werkstoff, Schmierstoff und Beanspruchungskollektiv

    Grün, F., Godor, I. & Javidi, A., 2008, Symposium 2008 - Innovationen bei Werk- und Schmierstoffen für moderne, umweltorientierte Tribosysteme. p. 53-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  201. Published

    Relaxationsverhalten von EN AW 7035 Gewindefurchschrauben für Antriebsstrangkomponenten aus Magnesium

    Hinteregger, C., Leitner, H., Jakob, T. & Godor, I., 2008, In: Konstruktion. 60, 9, p. 109-114

    Research output: Contribution to journal › Article › Research › peer-review

  202. Published

    Relaxationsverhalten von EN AW 7075 Gewindefurchschrauben für Antriebskomponenten aus Magnesium (Teil 2)

    Hinteregger, C., Leitner, H., Jakob, T. & Godor, I., 2008, In: Konstruktion. p. 70-74

    Research output: Contribution to journal › Article › Research › peer-review

  203. Published

    Relaxationsverhalten von EN AW 7075 Gewindefurchschrauben für Antriebsstrangkomponenten aus Magnesium (Teil 1)

    Hinteregger, C., Leitner, H., Jakob, T. & Godor, I., 2008, In: Konstruktion. 9, p. 109-114

    Research output: Contribution to journal › Article › Research › peer-review

  204. Published

    Schadensanalytische Untersuchungen von ausgewählten Schichten

    Grün, F., Godor, I. & Sailer, W., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  205. Published

    Test methods to visualize the break-down behaviour of sliding bearing materials

    Grün, F., Godor, I., Eichlseder, W. & Gaertner, W., 2008, 2007 Proceedings of the ASME/STLE International Joint Tribology Conference, IJTC 2007. Vol. PART A. p. 413-414 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  206. Published

    Tribological and material properties of PTFE-Bz-Compounds - Do the correspond?

    Godor, I., Grün, F., Major, Z., Vezer, S. & Leitgeb, A., 2008, 13th Nordic Symposium on Tribology. p. 1-14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  207. Published

    Tribologische charakterisierung von Beschichtungen durch RCF-Untersuchungen

    Godor, I. & Trausmuth, A., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  208. Published

    Tribologische Funktionsweise von metallischen Gleitwerkstoffen im Motorenbau

    Grün, F., Godor, I. & Eichlseder, W., 2008, Tagungsunterlagen - Forum für Metallurgie und Werkstofftechnik. p. 22-23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  209. Published

    Tribologisches Verhalten eines Al-Basis Gleitschicht

    Grün, F. & Godor, I., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  210. Published

    Tribologisches Verhalten eines Al-Basis Gleitwerkstoffes

    Grün, F. & Godor, I., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  211. Published

    Tribologisches Verhalten eines Al-Basis Gleitwerkstoffes (2)

    Grün, F. & Godor, I., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  212. Published

    Tribologisches Verhalten eines Al-Basis Gleitwerkstoffes (3)

    Grün, F. & Godor, I., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  213. Published

    Tribologisches Verhalten eines Al-Basis Gleitwerkstoffes (4)

    Grün, F. & Godor, I., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  214. Published

    Tribologisches Verhalten eines Al-Basis Gleitwerkstoffes (5)

    Grün, F. & Godor, I., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  215. Published

    Tribologisches Verhalten eines Cu-Basis Gleitwerkstoffes

    Grün, F. & Godor, I., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  216. Published

    Tribologisches Verhalten eines Kunststoff-Basis Gleitschicht

    Grün, F. & Godor, I., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  217. Published

    Tribologisches Verhalten eines Sn-Basis Gleitwerkstoffes

    Grün, F. & Godor, I., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  218. Published

    Tribosystem journal bearing: what are the benefits of damage equivalent model tests?

    Grün, F., Godor, I. & Eichlseder, W., 2008, 2nd Fatigue Symposium Leoben. p. 468-487

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  219. Published

    Unterschied Modell- und Bauteilprüfung

    Grün, F. & Godor, I., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  220. Published

    Vergleichende Losreißversuche an einem tribologischem Ersatzmodell Block-on-Plate

    Grün, F., Godor, I. & Sailer, W., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  221. Published

    Vergleichende tribometrische Untersuchungen an Polymer-Beschichtungen

    Grün, F., Godor, I., Sailer, W. & Krampl, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  222. Published

    Vergleichende tribometrische Untersuchungen von Schichten

    Grün, F., Godor, I. & Sailer, W., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  223. Published

    Vergleichende tribometrische Untersuchungen von Schichten -Teil 2

    Godor, I., Sailer, W. & Grün, F., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  224. Published

    Vergleichende tribometrische Untersuchungen von Stählen

    Grün, F. & Godor, I., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  225. Published

    Verhalten von gehärteten Randschichten unter Kontaktbeanspruchung

    Trausmuth, A., Godor, I., Stoschka, M. & Leitner, H., 2008, Verhalten von gehärteten Randschichten unter Kontaktbeanspruchung. p. 81-93

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  226. 2007
  227. Published

    Aluminium-base bearings – performance, limitations, new developments

    Mergen, R., Gumpoldsberger, G., Grün, F., Godor, I. & Langbein, F., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  228. Published

    Grundlagenforschung von tribologischen System im Antriebsstrang hinsichtlich Reibung und Verschleiß

    Godor, I., Grün, F., Leitner, H. & Oberwinkler, C., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  229. Published

    Jahresbericht 09/2006 - 08/2007 des Forschungsprojektes P154

    Godor, I., Grün, F. & Fröschl, J., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  230. Published

    Neue Erkenntnisse des tribologischen Verhaltens dreier TPU-Dichtungswerkstoffe

    Godor, I., Grün, F. & Major, Z., 2007, Reliability Engineering - Simulation und Monitoring von verschleißgefährdeten Systemen. p. 63-73

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  231. Published

    Numerischer Vergleich des Kontaktverhaltens verschiedener Prüfverfahren

    Stoschka, M., Grün, F., Godor, I. & Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  232. Published

    Schadensanalytischer Vergleich des Kontaktverhaltens verschiedener Prüfverfahren

    Stoschka, M., Godor, I. & Trausmuth, A., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  233. Published

    Schadensorientierte Prüfmethoden und abgeleitete Funktionsmodelle für Gleitwerkstoffe

    Grün, F., Godor, I. & Eichlseder, W., 2007, In: Tribologie und Schmierungstechnik. 54, p. 26-30

    Research output: Contribution to journal › Article › Research › peer-review

  234. Published

    Test Methods for the Characterisation of Different Designed Tribomaterials

    Godor, I., Grün, F. & Eichlseder, W., 2007, Proceedings of the European Conference on Tribology ECOTRIB 2007. p. 1123-1134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  235. Published

    Tribologische Charakterisierung von Materialien

    Godor, I., Grün, F. & Stoschka, M., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  236. Published

    Tribowerkstoffe auf der Basis von Aluminium

    Grün, F., Godor, I. & Eichlseder, W., 2007, Reliability Engineering - Simulation und Monitoring von verschleißgefährdeten Systemen. p. 93-103

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  237. Published

    Vergleichende tribometrische Korrosionsuntersuchungen

    Grün, F. & Godor, I., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  238. Published

    Verhalten von Plasmanitrierschichten unter Rolling Contact Fatigue Beanspruchung

    Godor, I., Leitner, H., Stoschka, M. & Trausmuth, A., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  239. Published

    Verschleißverhalten von Beschichtungen unter Hertzschen Kontaktbedingungen

    Grün, F. & Godor, I., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  240. 2006
  241. Published

    Ableitung eines Funktions-/Schädigungsmodells über den tribologischen Verhalten von PTFE-Bz-Composits

    Godor, I., Major, Z. & Vezér, S., 2006, Ableitung eines Funktions-/Schädigungsmodells über den tribologischen Verhalten von PTFE-Bz-Composits. p. 38/1-38/10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  242. Published

    Calibrating Tribological Tests on the Basis of Simulation Models

    Grün, F., Godor, I., Vitek, T. & Eichlseder, W., 2006, Winter Workshop of Applied Mechanics. p. 8-15

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  243. Published

    Characterisation of delamination crack growth between elastomer cross-ply fabrics

    Vezer, S., Major, Z. & Godor, I., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  244. Published

    Characterisation of Tribomaterials by Simulation and Tribological Tests

    Grün, F., Godor, I., Leitgeb, A., Köberl, H. & Eichlseder, W., 2006, Characterisation of Tribomaterials by Simulation and Tribological Tests. p. 73-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  245. Published

    Characterisation of Tribomaterials by Simulation and Tribological Tests

    Grün, F., Godor, I., Leitgeb, A., Köberl, H. & Eichlseder, W., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  246. Published

    Development of ABAQUS Model for Compound Material Friction Temperature Dependency Simulation

    Vitek, T., Grün, F., Leitgeb, A., Stoschka, M., Godor, I. & Eichlseder, W., 2006, Winter Workshop of Applied Mechanics. p. 46-51

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  247. Published

    Enhanced Fatigue Life by Mechanical Surface Treatments – Experiment and Simulation

    Gänser, H.-P., Godor, I., Leitner, H. & Eichlseder, W., 2006, Fracture of Nano and Engineering Materials and Structures. Springer, p. 205-206

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  248. Published

    Schadensanalytik als Basis für tribometrische Untersuchungen am Beispiel eines Gleitlagers

    Grün, F., Godor, I. & Eichlseder, W., 2006, Reibung Schmierung und Verschleiß-Forschung und praktische Anwendung. p. 44/1-44/10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  249. Published

    Schadensorientierte Prüfmethodenentwicklung am Beispiel eines Gleitlagers

    Grün, F., Godor, I. & Eichlseder, W., 2006, 1. Leobener Betriebsfestigkeitstage. p. 45-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  250. Published

    The tribological behavior of PTFE and PTFE compounds

    Vezer, S., Major, Z. & Godor, I., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  251. Published

    Tribological Studies on Sliding Bearings on the Basis of Damage Analysis

    Grün, F., Godor, I. & Eichlseder, W., 2006, Advanced Problems in Mechanics (APM). p. 200-211

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  252. Published

    Tribological test engineering - Comparison of component tests of sliding bearings with tribological model tests

    Grün, F., Gódor, I. & Eichlseder, W., 2006, In: Transactions of FAMENA. 30, 1, p. 37-44 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  253. Published

    Tribological Test Engineering-Comparsion of Sliding Bearings with Tribological Model Tests

    Grün, F., Godor, I. & Eichlseder, W., 2006, In: Transactions of FAMENA. p. 37-44

    Research output: Contribution to journal › Article › Research › peer-review

  254. Published

    Tribologische Prüftechnik-Vergleich Bauteilprüfung von Gleitlagern mit Prüfung an einem tribologischem Ersatzmodell

    Grün, F., Godor, I. & Eichlseder, W., 2006, In: Österreichische Ingenieur- und Architekten-Zeitschrift : ÖIAZ. 151 Jg, p. 34-41

    Research output: Contribution to journal › Article › Research › peer-review

  255. Published

    Tribologisches Werkstoffverhalten von Thermoplastischen Polyurethan Dichtungswerkstoffen

    Godor, I., Major, Z. & Grün, F., 2006, Tribologisches Werkstoffverhalten von Thermoplastischen Polyurethan Dichtungswerkstoffen. p. 57-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  256. Published

    Tribometric Analysis of two tribo-materials with different contact geometries-critical reflection and simulation of the results

    Grün, F., Godor, I., Araujo, B. & Eichlseder, W., 2006, Analysis and Simulation of Contact Problems. p. 387-388

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  257. Published

    Vergleich der Funktionsweise von Tribomaterialien unterschiedlichen Aufbaus in Gleitanwendungen

    Grün, F., Godor, I., Eichlseder, W. & Gärtner, W., 2006, Vergleich der Funktionsweise von Tribomaterialien unterschiedlichen Aufbaus in Gleitanwendungen. p. 89-96

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  258. 2005
  259. Published

    A comparison of two experimental methods for assessing the influence of initial defects on fatigue life

    Gänser, H.-P., Godor, I., Eichlseder, W., Pippan, R., Ofner, R. & Vollgger, R., 2005, A comparison of two experimental methods for assessing the influence of initial defects on fatigue life. Eigenverlag, p. 500-500

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  260. Published

    Augmentation de la Résistance aux effort alternés de roues dentées par combinaison de la cémentation et le grenaillage

    Eichlseder, W., Leitner, H., Godor, I., Waggermayer, M. & Hinteregger, C., 2005, Augmentation de la Réstistance aux effort alternés de roues dentées par combinaison de la cémentation et le grenaillage.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  261. Published

    Betriebsfeste Auslegung von Schraubenverbindungen im Leichtmetallguss

    Leitner, H., Godor, I., Eichlseder, W. & Hinteregger, C., 2005, Betriebsfeste Auslegung von Schraubenverbindungen im Leichtmetallguss. p. 257-263

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  262. Published

    Characterization of the tribological behavior of engineering polymers, Part I: PTFE and PTFE Compounds

    Major, Z., Godor, I., Resch, K., Vezer, S. & Müller, J., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  263. Published

    Development of Tribological Test Methods

    Grün, F., Godor, I., Eichlseder, W., Köberl, H. & Lang, H., 2005, Development of Tribological Test Methods. p. 192-193

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  264. Published

    Einsatz von gewindefurchenden Stahl- und Aluminiumschrauben zur Verschraubung von Getriebegehäusen im Fahrzeugbau

    Leitner, H., Godor, I., Hinteregger, C. & Eichlseder, W., 2005, Schraubenverbindungen. p. 347-366

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  265. Published

    Entwicklung von tribologischen Prüfmethoden für geschmierte Bauteile

    Grün, F., Godor, I., Araujo, B. & Eichlseder, W., 2005, Entwicklung von tribologischen Prüfmethoden für geschmierte Bauteile. p. 101-108

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  266. Published

    Fatigue life analysis of geometrically complex components

    Eichlseder, W., Araujo, B., Riedler, M., Leitner, H. & Godor, I., 2005, Fatigue life analysis of geometrically complex components. p. 504-511

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  267. Published

    Increased Fatigue Limit of Gear Wheels by a Combination of Case Hardening and Shot Peening

    Leitner, H., Eichlseder, W., Godor, I., Waggermayer, M. & Hinteregger, C., 2005, Increased Fatigue Limit of Gear Wheels by Combination of Case Hardening and Shot Peening. p. 487-595

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  268. Published

    Multiaxial Fatigue of Crank Shafts

    Fröschl, J., Lamik, A., Eichlseder, W. & Godor, I., 2005, Multiaxial Fatigue of Crank Shafts. p. 37-42

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  269. Published

    Relaxation der Vorspannkraft von Magnesium-Schraubenverbindungen unter betriebsähnlichen Bedingungen

    Leitner, H., Godor, I., Eichlseder, W. & Hinteregger, C., 2005, In: Gießerei-Rundschau. 7, p. 36-43

    Research output: Contribution to journal › Article › Research › peer-review

  270. Published

    The Influence of Multiaxial Loading on the Fatigue Behaviour

    Fröschl, J., Lamik, A., Godor, I. & Eichlseder, W., 2005, The Influence of Multiaxial Loading on the Fatigue Behaviour. p. 190-191

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  271. Published

    Tribometric Analysis of two Tribo-Materials with different Contact Geometries-Critical Reflection and Simulation of the Results

    Grün, F., Godor, I., Araujo, B. & Eichlseder, W., 2005, Tribometric Analysis of two Tribo-Materials with different Contact Geometries-Critical Reflection and Simulation of the Results. p. 45-45

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  272. Published

    Wirtschaftlicher Leichtbau: Gewindefurchschrauben bei druckgegossenen Al-Gehäusen

    Godor, I., Leitner, H., Eichlseder, W., Klampfl, H. & Hinteregger, C., 2005, In: Gießerei-Rundschau. 52, p. 229-234

    Research output: Contribution to journal › Article › Research › peer-review

  273. 2004
  274. Published

    Kritische Betrachtung von Tribometeranwendungen

    Grün, F., Godor, I., Stoschka, M. & Eichlseder, W., 2004, Symposium 2004. p. 67-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  275. Published

    Some contributions to the characterization of the development of transfer film for PTFE Compounds

    Major, Z., Godor, I. & Resch, K., 2004, Reibung und Verschleiß im Spannungsfeld von Fahrzeugherstellern und deren Kunden. p. 221-226

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

View graph of relations

Latest Research Output

View more (256)