Irmgard Weißensteiner

1 - 45 out of 45Page size: 100

Research output

  1. 2025
  2. Published

    Mechanisms determining bendability in Al-Mg-Si-Fe crossover alloys

    Trink, B., Weißensteiner, I., Uggowitzer, P. J., Samberger, S., Coradini, D. S. R., Falkinger, G., Strobel, K. & Pogatscher, S., 1 Apr 2025, In: Acta Materialia. 287, 120810.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2024
  4. Published

    Impact of Surface Microstructure and Properties of Aluminum Electrodes on the Plating/Stripping Behavior of Aluminum-Based Batteries Using Imidazolium-Based Electrolyte

    Razaz, G., Weißensteiner, I., Örtegren, J., Trink, B., Pogatscher, S. & Arshadi Rastabi, S., 16 Nov 2024, In: ACS Applied Materials & Interfaces. 16.2024, 47, p. 64389-65740 52 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. E-pub ahead of print

    Effect of cold rolling route and annealing on the microstructure and mechanical properties of AISI 316 L stainless steel

    Mohammadzehi, S., Roostaei, M., Mirzadeh, H., Mahmudi, R. & Weißensteiner, I., 9 Jun 2024, (E-pub ahead of print) In: Materials characterization. 214.2024, Ausgust, 10 p., 114072.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Automatic Texture Alignment by Optimization Method

    Ott, A. C., Weißensteiner, I., Arnoldt, A., Österreicher, J. A. & Papenberg, N. P., 8 Mar 2024, In: Microscopy and microanalysis. 30.2024, 2, p. 253-277 25 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. 2023
  8. Published

    Recycling aluminum alloys for the automotive industry: Breaking the source-sink paradigm

    Krall, P., Weißensteiner, I. & Pogatscher, S., 18 Dec 2023, In: Resources, Conservation and Recycling. 202.2024, January, 11 p., 107370.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Precipitation behavior of hexagonal carbides in a C containing intermetallic γ-TiAl based alloy

    Burtscher, M., Weißensteiner, I., Wartbichler, R., Kirchheimer, K., Bernhard, C., Kiener, D. & Clemens, H., 4 Oct 2023, In: Journal of alloys and compounds. 969.2023, 25 December, 7 p., 172400.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Processing and microstructure–property relations of Al-Mg-Si-Fe crossover alloys

    Trink, B., Weißensteiner, I., Uggowitzer, P., Strobel, K., Hofer-Roblyek, A. & Pogatscher, S., 15 Sept 2023, In: Acta Materialia. 257.2023, 15 September, 27 p., 119160.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Deformation Analysis in Novel Aluminum Alloys

    Weißensteiner, I., 15 Jun 2023, EMC 2023 Proceedings. 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    A close look at recrystallization in recycling tolerant Al-Mg-Si alloys

    Weißensteiner, I., 19 May 2023.

    Research output: Contribution to conference › Poster › Research

  13. E-pub ahead of print

    Unveiling the strengthening mechanisms of as-cast micro-alloyed CrMnFeCoNi high-entropy alloys

    Zamani, M. R., Mirzadeh, H., Malekan, M., Weißensteiner, I. & Roostaei, M., 5 May 2023, (E-pub ahead of print) In: Journal of alloys and compounds. 957.2023, 25 September, 15 p., 170443.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Fine-grained aluminium crossover alloy for high-temperature sheet forming

    Samberger, S., Weißensteiner, I., Stemper, L., Kainz, C., Uggowitzer, P. & Pogatscher, S., 19 Apr 2023, In: Acta materialia. 253.2023, 1 July, 14 p., 118952.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Influence of Hot Band Annealing on Cold-Rolled Microstructure and Recrystallization in AA 6016

    Cantergiani, E., Weißensteiner, I., Grasserbauer, J., Falkinger, G., Pogatscher, S. & Roters, F., Jan 2023, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 54.2023, 1, p. 75-96 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Deformation analysis in novel aluminium alloys

    Weißensteiner, I., 2023, Proceedings - European Metallurgical Conference, EMC 2023. p. 447-456 10 p. (Proceedings - European Metallurgical Conference, EMC 2023; vol. 1).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. 2022
  18. Published

    High Fe content in Al-Mg-Si wrought alloys facilitates excellent mechanical properties

    Trink, B., Weißensteiner, I., Uggowitzer, P., Strobl, K. & Pogatscher, S., 1 Jul 2022, In: Scripta Materialia. 215, 6 p., 114701.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Mitigating the detrimental effects of galvanic corrosion by nanoscale composite architecture design

    Renk, O., Weißensteiner, I., Cihova, M., Steyskal, E.-M., Sommer, N., Tkadletz, M., Pogatscher, S., Schmutz, P., Eckert, J., Uggowitzer, P., Pippan, R. & Weinberg, A. M., 16 Jun 2022, In: npj Materials degradation. 47.2022, 6, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. 2021
  21. Published

    Influence of Fe and Mn on the Microstructure Formation in 5xxx Alloys—Part II: Evolution of Grain Size and Texture

    Grasserbauer, J., Weißensteiner, I., Falkinger, G., Uggowitzer, P. & Pogatscher, S., 15 Jun 2021, In: Materials. 14.2021, 12, 3312.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Influence of Fe and Mn on the Microstructure Formation in 5xxx Alloys—Part I: Evolution of Primary and Secondary Phases

    Grasserbauer, J., Weißensteiner, I., Falkinger, G., Kremmer, T., Uggowitzer, P. & Pogatscher, S., 2 Jun 2021, In: Materials. 14.2021, 12, 3204.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Synergistic alloy design concept for new high-strength Al–Mg–Si thick plate alloys

    Schmid, F., Weißensteiner, I., Tunes, M. A., Kremmer, T., Ebner, T., Morak, R., Uggowitzer, P. J. & Pogatscher, S., Mar 2021, In: Materialia. 15, 13 p., 100997.

    Research output: Contribution to journal › Article › Research › peer-review

  24. 2020
  25. Published

    Mechanism of low temperature deformation in aluminium alloys

    Gruber, B., Weißensteiner, I., Kremmer, T., Grabner, F., Falkinger, G., Schökel, A., Spieckermann, F., Schäublin, R., Uggowitzer, P. & Pogatscher, S., 23 Sept 2020, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 795, 795, 11 p., 139935.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Auflösung von Mg-Reststoffen in Citronensäurelösung – H2-Entwicklung

    Weißensteiner, I., 2 May 2020

    Research output: Book/Report › Commissioned report › Research

  27. Published

    Mg-alloys for forging applications-A review

    Papenberg, N. P., Gneiger, S., Weißensteiner, I., Uggowitzer, P. J. & Pogatscher, S., 22 Feb 2020, In: Materials. 13.2020, 4, 61 p., 985.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Evolution of microstructure and texture in laboratory- and industrial-scaled production of automotive Al-sheets

    Grasserbauer, J., Weißensteiner, I., Falkinger, G., Mitsche, S., Uggowitzer, P. & Pogatscher, S., 19 Jan 2020, In: Materials. 13.2020, 2, 469.

    Research output: Contribution to journal › Article › Research › peer-review

  29. 2019
  30. Published

    Influence of quenching conditions on texture and mechanical properties of ultra-high strength steels

    Esterl, R., Sonnleitner, M., Weißensteiner, I., Hartl, K. & Schnitzer, R., 5 Jul 2019, In: Journal of materials science. 54.2019, 19, p. 12875-12886 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Kryogene Umformung von AlMg und AlMgSi Legierungen – ein Blick auf die Texturentwicklung

    Weißensteiner, I. & Gruber, B., 13 Feb 2019.

    Research output: Contribution to conference › Poster › Research

  32. Published

    Deformation-induced phase transformation in a Co-Cr-W-Mo alloy studied by high-energy X-ray diffraction during in-situ compression tests

    Weißensteiner, I., Petersmann, M., Erdely, P., Stark, A., Antretter, T., Clemens, H. & Maier-Kiener, V., Feb 2019, In: Acta materialia. 164.2019, February, p. 272-282 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. 2018
  34. Published

    Die Grenzen der Austenitrückkonstruktion eines mehrphasigen Stahles in unterschiedlichen Gefügemodifikationen

    Weißensteiner, I., Thomas, H., Clemens, H. & Maier-Kiener, V., 19 Sept 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 301-306 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Effect of Morphological Differences on the Cold Formability of an Isothermally Heat-Treated Advanced High-Strength Steel

    Weißensteiner, I., Suppan, C., Hebesberger, T., Winkelhofer, F., Clemens, H. & Maier-Kiener, V., 10 Apr 2018, In: JOM. 70.2018, 8, p. 1567-1575 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Deformation in technical bcc and fcc materials - mechanical and correlative microstructural analyses

    Weißensteiner, I., 2018

    Research output: Thesis › Doctoral Thesis

  37. Published

    H-carbide precipitation behaviour in a C-containing β-solidifying TiAl alloy

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Klein, T., Mayer, S. & Clemens, H., 2018.

    Research output: Contribution to conference › Poster › Research

  38. Published

    Investigation of the Precipitation Behavior of H-Carbides in a TiAl Alloy containing Carbon by means of in- and ex-situ Characterization

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 10, p. 693-703 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Strain-induced martensitic transformation in a Co-Cr-W-Mo alloy probed by nanoindentation

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 2018, Proceedings of the International Conference on Martensitic Transformations. p. 247-250

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. 2017
  41. E-pub ahead of print

    Phase transformations in a β-solidifying γ-TiAl based alloy during rapid solidification

    Kastenhuber, M., Klein, T., Rashkova, B., Weißensteiner, I., Clemens, H. & Mayer, S., 1 Sept 2017, (E-pub ahead of print) In: Intermetallics. 91.2017, December, p. 100-109 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Characterization of a Biocompatible Co-Cr-W Alloy by means of Correlative Microscopy and Nanoindentation Experiments

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 2017.

    Research output: Contribution to conference › Poster › Research

  43. Published

    Untersuchungen des Ausscheidungsverhaltens von H-Karbiden in einer kohlenstoffhaltigen TiAl Legierung mittels in- und ex-situ Experimenten

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2017, Praktische Metallographie Sonderband 51. p. 55-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. 2016
  45. Published

    Phase Characterization of a Biocompatible Co-Cr-W Alloy by means of Correlative Microscopy

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 28 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  46. Published

    Analyse einer Co-Cr-W Legierung mittels korrelativer Mikroskopie und Nanoindentation

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 2016.

    Research output: Contribution to conference › Presentation › Research

  47. Published

    Effect of different bainite morphologies on the formability of advanced high strength steels

    Weißensteiner, I., Hebesberger, T. & Clemens, H., 2016.

    Research output: Contribution to conference › Poster › Research

  48. Published

    Evolution of strain-induced hafnium carbides in a molybdenum base MoeHfeC alloy studied by small-angle neutron scattering and complementary methods

    Lang, D., Karge, L., Schatte, J., Gilles, R., Dallinger, R., Weißensteiner, I., Staron, P., Knabl, W., Primig, S. & Clemens, H., 2016, In: Journal of alloys and compounds. 688, p. 619-631 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Microstructural characterization of ultra-high strength steel welds by means of Light Optical Microscopy and Electron Backscatter Diffraction

    Haslberger, P., Weißensteiner, I., Clemens, H., Ernst, W. & Schnitzer, R., 2016.

    Research output: Contribution to conference › Poster › Research

  50. Published

    Phase Characterization of a Biocompatible Co-Cr-W Alloy Via Correlative Microscopy

    Weißensteiner, I., Voigt, P., Maier-Kiener, V. & Clemens, H., 2016, In: Practical metallography = Praktische Metallographie. 53, 7, p. 450-461 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Phasencharakterisierung mittels korrelativer Mikroskopie an einer biokompatiblen Co-Cr-W Legierung

    Weißensteiner, I., Voigt, P., Maier-Kiener, V. & Clemens, H., 2016, Sonderbände der Praktischen Metallographie: Fortschritte in der Metallographie. Vol. 48. p. 151-156 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Strain-induced martensitic transformation in a Co-Cr-W alloy studied by in-situ HEXRD experiments

    Weißensteiner, I., Erdely, P., Voigt, P., Clemens, H. & Maier-Kiener, V., 2016.

    Research output: Contribution to conference › Poster › Research

  53. 2014
  54. Published

    Advanced Steels

    Clemens, H., Primig, S., Mendez Martin, F., Babinsky, K., Hofer, C., Lang, D., Sackl, S. C., Turk, C. & Weißensteiner, I., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  55. Published

    Characterization of a TNM alloy for high performance automotive applications

    Weißensteiner, I., 2014

    Research output: Thesis › Diploma Thesis

  56. Published

    High Performance Materials

    Clemens, H., Primig, S., Mendez Martin, F., Babinsky, K., Hofer, C., Lang, D., Sackl, S. C., Turk, C. & Weißensteiner, I., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

View graph of relations

Contact

Phone: 5257

Latest Research Output

View more (45)