Hubert Köberl

(Former)

1 - 32 out of 32Page size: 100

Research output

  1. 2023
  2. Published

    Hydrogen resistance and trapping behaviour of a cold-drawn ferritic-pearlitic steel wire

    Truschner, M., Pengg, J., Loder, B., Köberl, H., Gruber, P., Moshtaghi, M. & Mori, G. K., Jun 2023, In: International Journal of Materials Research. 114.2023, 6, p. 439-452 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2022
  4. Accepted/In press

    Influence Of Cold Deformation On Hydrogen Embrittlement By Determining The Critical Hydrogen Concentration In High Strength Steel For Wire Applications

    Truschner, M., Deutsch, J. (Co-editor), Pengg, J. (Co-editor), Mori, G. K. (Co-editor), Köberl, H. (Co-editor) & Gruber, P. J. (Co-editor), 8 Mar 2022, (Accepted/In press).

    Research output: Contribution to conference › Paper › peer-review

  5. 2012
  6. Published

    Valuation of TMF Lifetime Calculation Methods and their Limitations of Usabililty

    Köberl, H., Winter, G. & Eichlseder, W., 2012, Key engineering materials. Vol. 488-489. p. 403-406 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  7. 2011
  8. Published

    LCF and TMF characterisation for an aluminium die cast alloy

    Huter, P. & Köberl, H., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    TMF Lifetime Calculation Methods and their Limitations of Usability

    Köberl, H., Winter, G. & Eichlseder, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. 2010
  11. Published

    Liftime Calculation of thermo-Mechanically Loaded Materials (Al, Cu, Ni, and Fe Alloys) Based un Empirical Methods

    Köberl, H., Winter, G. & Eichlseder, W., 2010, In: Journal of ASTM international. Vol. 8, p. 1-11

    Research output: Contribution to journal › Article › Research › peer-review

  12. 2009
  13. Published

    Abschlussbericht Betriebsfestigkeit GE Jenbacher

    Köberl, H. & Gerstmayr, G., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    Energiebasierende Lebensdauerbewertung von Nickellegierungen

    Köberl, H., Winter, G. & Eichlseder, W., 2009, In: Materialprüfung. 5/2009, p. 276-286

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Entwicklung eines Modells zur Beschreibung des Lebensdauerverhaltens von NE-Legierungen (Al, Cu, Ni) unter thermomechanischer Beanspruchung

    Köberl, H., 2009

    Research output: Thesis › Doctoral Thesis

  16. Published

    Research of variable loading cases during thermo-mechanical fatigue (TMF), Investigations and considerations in the lifetime calculation

    Winter, G., Köberl, H., Tan, W. & Eichlseder, W., 2009, Second International Conference on Material and Component Performance under Variable Amplitude Loading. p. 517-526

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Schwingfestigkeitsuntersuchungen an Aluminium-Guß-Legierungen

    Köberl, H., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    TMF-Charakterisierung von X38CrMoV5-1 mit unterschiedlicher Wärmebehandlung

    Köberl, H., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. 2008
  20. Published

    Comparison of the Teperature and Pre-Aging Influences on the Low Cycle Fatigue and Thermo-Mechanical Fatigue Behaviour of Copper Alloys (CuCoBe/CuCo2Be)

    Köberl, H., Winter, G., Leitner, H. & Eichlseder, W., 2008, In: Journal of ASTM international. Vol.5, p. 1-12

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Expertise of thermomechanical fatigue at the institute of mechanical engineering

    Winter, G., Köberl, H. & Eichlseder, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  22. Published

    Jahresbericht 2007 - CD Labor

    Eichlseder, W., Grün, F., Köberl, H., Stoschka, M., Winter, G. & Fröschl, J., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Material and fatigue life models for thermomechanical loaded components

    Eichlseder, W., Winter, G. & Köberl, H., 2008, In: Materialwissenschaft und Werkstofftechnik. 39, p. 777-782

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Methoden zur Ermittlung der TMF-Lebensdauer von GJV450

    Winter, G., Köberl, H. & Eichlseder, W., 2008, In: Gießerei-Rundschau. 55, p. 238-241

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Tätigkeitsbericht CD-Labor

    Eichlseder, W., Fröschl, J., Grün, F., Stoschka, M., Leitgeb, A., Köberl, H. & Winter, G., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    The influence of thermomechanical fatigue on Nickel coatings

    Köberl, H., Winter, G., Leitner, H. & Eichlseder, W., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    The influence of thermomechanical fatigue on Nickel coatings

    Köberl, H., Winter, G., Leitner, H. & Eichlseder, W., 2008, Sixt international conference on low cycle fatigue. p. 149-154

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    TMF investigations on Copper and Nickel alloys

    Köberl, H., Winter, G. & Eichlseder, W., 2008, 2nd fatigue Symposium Leoben. p. 139-148

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    TMF investigations on specimens of SiMo alloyed cast iron are compared to a breakdown of an exhaust manifold

    Winter, G., Köberl, H., Tan, W. & Eichlseder, W., 2008, Sixth International Conference on Low Cycle Fatigue. p. 177-183

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. 2007
  31. Published

    Bestimmung der zyklischen Materialeigenschaften von S390PM, S690PM, K890PM

    Köberl, H. & Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    Evaluation of the load carrying capacity of differently manufactured planet gear wheels

    Haberer, C., Leitner, H. & Köberl, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  33. Published

    Failure Mechanism of Pure Nickel (Ni 200/201) under thermo-Mechanical Loading

    Köberl, H., Winter, G., Riedler, M. & Eichlseder, W., 2007, Advances in Fracture and Damage Mechanics VI. p. 793-796

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Failure Mechanism of Pure Nickel (Ni 200/201) under thermo-Mechanical Loading

    Köberl, H., Winter, G., Riedler, M. & Eichlseder, W., 2007, Key engineering materials. Vol. 348-349. p. 793-769 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  35. Published

    The Influence of Temperature and Pre-Aging on the Low Cycle Fatigue Behaviour of Nickel Coatings (Ni 200/201)

    Köberl, H., Leitner, H. & Eichlseder, W., 2007, Experimental Analysis of Nana and Engineering Materials and Structures. p. 731-733

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. 2006
  37. Published

    Characterisation of Tribomaterials by Simulation and Tribological Tests

    Grün, F., Godor, I., Leitgeb, A., Köberl, H. & Eichlseder, W., 2006, Characterisation of Tribomaterials by Simulation and Tribological Tests. p. 73-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Characterisation of Tribomaterials by Simulation and Tribological Tests

    Grün, F., Godor, I., Leitgeb, A., Köberl, H. & Eichlseder, W., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  39. Published

    Lifetime investigations of wear-resistant ni-coatings

    Köberl, H., Leitner, H., Riedler, M. & Eichlseder, W., 2006, 23rd Danubia-Adria Symposium on experimental methods in solid mechanics. p. 173-175

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Lifetime investigations of wear-resistant ni-coatings

    Köberl, H., Leitner, H., Riedler, M. & Eichlseder, W., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  41. 2005
  42. Published

    Development of Tribological Test Methods

    Grün, F., Godor, I., Eichlseder, W., Köberl, H. & Lang, H., 2005, Development of Tribological Test Methods. p. 192-193

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

View graph of relations

Latest Research Output

View more (32)