Hermann Maderbacher

(Former)

1 - 20 out of 34Page size: 20

Research output

  1. 2019
  2. Published

    Reproducibility of navigation based kinematic analysis of the knee – A cadaveric investigation

    Maderbacher, G., Keshmiri, A., Springorum, H. R., Maderbacher, H., Grifka, J. & Baier, C., 1 Jan 2019, In: Journal of orthopaedic science : official journal of the Japanese Orthopaedic Association . 24.2019, 1, p. 128-135 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. 2018
  4. Published

    Rotation of intramedullary alignment rods affects distal femoral cutting plane in total knee arthroplasty

    Maderbacher, G., Matussek, J., Keshmiri, A., Greimel, F., Baier, C., Grifka, J. & Maderbacher, H., 1 Nov 2018, In: Knee surgery, sports traumatology, arthroscopy : KSSTA ; official clinical journal of ESSKA. 26, 11, p. 3311-3316 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. 2017
  6. Published

    Influence of Component Rotation in Total Knee Arthroplasty on Tibiofemoral Kinematics—A Cadaveric Investigation

    Maderbacher, G., Keshmiri, A., Springorum, H. R., Maderbacher, H., Grifka, J. & Baier, C., 1 Sept 2017, In: The Journal of Arthroplasty. 32.2017, 9, p. 2869-2877 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Impact of Axial Component Alignment in Total Knee Arthroplasty on Lower Limb Rotational Alignment: An in Vitro Study

    Maderbacher, G., Baier, C., Springorum, H. R., Maderbacher, H., Birkenbach, A. M., Benditz, A., Grifka, J. & Keshmiri, A., 1 May 2017, In: Journal of Knee Surgery. 30.2017, 4, p. 372-377 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. 2015
  9. Published

    The 13th World Conference on Titanium 2015: Stability of Residual Stresses in Ti-6Al-4V Components due to Mechanical Loads

    Stanojevic, A., Maderbacher, H., Oberwinkler, B. & Angerer, P., 16 Aug 2015.

    Research output: Contribution to conference › Abstract › peer-review

  10. Published

    12th International Conference on the Mechanical Behavior on of Materials: Thermal Stability of Residual Streses in Ti-6Al-4V components

    Stanojevic, A., Maderbacher, H., Angerer, P. & Oberwinkler, B., 10 May 2015.

    Research output: Contribution to conference › Abstract

  11. Published

    Yield stress evolution in Inconel 718 samples under standard heat treatment process conditions of turbine disks

    Drexler, A., Maderbacher, H., Povodon-Karadeniz, E., Gänser, H. P., Ecker, W., Oberwinkler, B. & Fischersworring-Bunk, A., 2015, European Conference on Heat Treatment 2015 and 22nd IFHTSE Congress - Heat Treatment and Surface Engineering from Tradition to Innovation. Associazione Italiana di Metallurgia

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. 2014
  13. Published

    Bauteilversuche an Getriebedeckeln - Zwischenbericht

    Maderbacher, H., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    Grundlagenversuche mit Proben aus AlSi9Cu3 Lenkgehäusen

    Maderbacher, H., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  15. Published

    Verschleiß von Eisengranulat in einem Fließbett

    Maderbacher, H., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. 2013
  17. Published

    The influence of microstructure and operating temperature on the fatigue endurance of hot forged Inconel (R) 718 components

    Maderbacher, H., Oberwinkler, B., Gänser, H.-P., Tan, W., Rollett, M. & Stoschka, M., 15 Nov 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 585, p. 123-131

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Erstellung einer geschlossenen Simulationskette zur Optimierung der Schwingfestigkeit von geschmiedeten Bauteilen aus Nickelbasislegierungen

    Maderbacher, H., 2013

    Research output: Thesis › Doctoral Thesis

  19. Published

    Grundlagenversuche mit Proben aus Lenkgehäusen

    Maderbacher, H., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Structural analysis of a drill bit including result interpretation for cyclic loading

    Maderbacher, H., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    The influence of microstructure and operating temperature on the fatigue endurance of hot forged Inconel® 718 components

    Maderbacher, H., Oberwinkler, B., Gänser, H.-P., Tan, W., Rollett, M. & Stoschka, M., 2013, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. Volume 585, p. 123-131

    Research output: Contribution to journal › Article › Research › peer-review

  22. 2012
  23. Published

    A closed concept to associate the hot-forging process controlled microstructure with fatigue life

    Stoschka, M., Stockinger, M., Maderbacher, H. & Riedler, M., 2 Oct 2012, Superalloys 2012 - Proceedings of the 12th International Symposium on Superalloys. p. 625-631 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Berechnung von Thermospannungen in einem geklebten Keramik-GFK-Verbund nach der Aushärtung

    Mösenbacher, A., Maderbacher, H. & Guster, C., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Microstructural Assessment of IN718: A Closed-Loop Fatigue Approach

    Stoschka, M., Maderbacher, H. & Stockinger, M., 2012, Materials Science Forum. Vol. 706-709.2012. p. 2468-2473 (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  26. 2011
  27. Published

    Lifetime optimization of hot forged aerospace components by linking microstructural evaluation and fatigue behaviour

    Maderbacher, H., Gänser, H.-P., Riedler, M., Stoschka, M., Stockinger, M. & Eichlseder, W., 2011, Euro Superalloys 2010. Trans Tech Publications, p. 162-167 (Advanced materials research; vol. 278).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    MICROSTRUCTURAL ASSESSMENT OF IN718: A closed-loop fatigue approach

    Stoschka, M., Maderbacher, H., Stockinger, M. & Riedler, M., 2011, Abstracts Thermec 2011. p. 550-550

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 Next
View graph of relations

Latest Research Output

View more (34)