Helmut Clemens

(Former)

251 - 300 out of 626Page size: 50

Research output

  1. 2015
  2. Published

    Investigation of the self tempering effect of martensite by means of atom probe tomography

    Sackl, S. C., Clemens, H. & Primig, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 7, p. 374-383

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation

    Schuh, B., Mendez Martin, F., Völker, B., George, E. P., Clemens, H., Pippan, R. & Hohenwarter, A., 2015, In: Acta materialia. 96, p. 258-268

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Metallography - A Powerful Instrument for Material Characterisation, Material Development and Failure Analysis

    Panzenböck, M., Hawranek, G., Mendez Martin, F., Mayer, S., Pölzl, S., Schütz, P., Primig, S., Rashkova, B. & Clemens, H., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  5. Published

    Microstructural characterization of intermetallic Mo-containing TiAl-Si alloys after high temperature deformation

    Godor, F., Werner, R., Lindemann, J., Mayer, S. & Clemens, H., 2015.

    Research output: Contribution to conference › Presentation › Research

  6. Published

    Microstructural evolution and grain refinement in an intermetallic titanium aluminide alloy with molybdenum content

    Rashkova, B., Spiradek-Hahn, K., Brabetz, M., Zhang, Z., Schöberl, T., Clemens, H. & Mayer, S., 2015, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 106, p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Microstructure characterization of intermetallic γ-TiAl based alloys after high-temperature deformation

    Godor, F., Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 5, p. 239-248

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    On the chemistry of the carbides in a molybdenum base Mo-Hf-C alloy produced by powder metallurgy

    Lang, D., Pöhl, C., Holec, D., Schatte, J., Povoden-Karadeniz, E., Knabl, W., Primig, S. & Clemens, H., 2015.

    Research output: Contribution to conference › Poster › Research

  9. Published

    Order Transition and its impact on mechanical properties of a Fe - 25 at% Co-9 at% Mo alloy

    Turk, C., Kellezi, G., Harald, L., Clemens, H. & Primig, S., 2015, p. 307.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. Published

    Orientation dependent recovery and recrystallization behavior of hot-rolled molybdenum

    Primig, S., Clemens, H., Knabl, W., Lorich, A. & Stickler, R., 2015, In: International journal of refractory metals & hard materials. 48, p. 179-186

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Oxidation protection of multiphase Mo-containing γ-TiAl-based alloys under cyclic test conditions

    Donchev, A., Pflumm, R., Galetz, M., Mayer, S., Clemens, H. & Schütze, M., 2015, Materials Research Society Symposium Proceedings Vol. 1760.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  12. Published

    Phase decomposition of a nanocrystalline CoCrFeMnNi high-entropy alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H., Völker, B., Pippan, R. & George, E. P., 2015.

    Research output: Contribution to conference › Poster › Research

  13. Published

    Phase decomposition of a nanocrystalline CoCrFeMnNi high-entropy alloy

    Schuh, B., Hohenwarter, A., Mendez Martin, F., Clemens, H., George, E. P., Völker, B. & Pippan, R., 2015.

    Research output: Contribution to conference › Presentation › Research

  14. Published

    Preparation of carbide-free bainitic steels for EBSD investigations

    Hofer, C., Clemens, H. & Primig, S., 2015, In: Practical metallography = Praktische Metallographie. 52, 7, p. 384-395

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Pulvermetallurgie von intermetallischen Titanaluminiden

    Mayer, S. & Clemens, H., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, p. 513 - 516 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Reconstruction of grain boundaries by crystallographic features: A method applicable for reflectron data?

    Babinsky, K., Gault, B., Clemens, H. & Primig, S., 2015.

    Research output: Contribution to conference › Presentation › Research

  17. Published

    Segregation of C and si in lamellar microstructures of β-solidifying γ-TiAl-based alloys

    Klein, T., Rashkova, B., Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  18. Published

    Stacking fault energies and the generalized stacking fault energy of γ-TiAl (ongoing Masterthesis)

    Dumitraschkewitz, P., Clemens, H., Mayer, S. & Holec, D., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  19. Published

    Structural characterization of "carbide-free" bainite in a Fe-0.2C-1.5Si-2.5Mn steel

    Hofer, C., Harald, L., Winkelhofer, F., Clemens, H. & Primig, S., 2015, In: Materials characterization. 102, p. 85-91

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Texture evolution during deformation of a Mo-Hf-C alloy studied with electron backscatter diffraction

    Lang, D., Schatte, J., Knabl, W., Clemens, H. & Primig, S., 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 5, p. 226-230

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    The role of metallography in the development and characterization of high-performance materials

    Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2015, In: Practical metallography = Praktische Metallographie. 52.2015, 2, p. 59-74 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    The use of atom probe tomography for the characterization and development of intermetallic γ-TiAl based alloys

    Klein, T., Schachermayer, M., Mendez Martin, F., Holec, D., Rashkova, B., Schöberl, T., Clemens, H. & Mayer, S., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  23. 2014
  24. Published

    Komplementäre Werkstoffcharakterisierung am Department Metallkunde und Werkstoffprüfung

    Mayer, S., Panzenböck, M. & Clemens, H., 6 Aug 2014, In: Dialog : Materialwissenschaft und Werkstofftechnik . p. 56-57

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    60. Metallkunde Jubiläumskolloquium - Abstractband

    Mitterer, C. (Editor) & Clemens, H. (Editor), 2014, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  26. Published

    Advanced intermetallic γ-TiAl based alloys with improved microstructural stability during creep

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  27. Published

    Advanced intermetallic γ-TiAl based alloys with improved microstructural stability during creep

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2014, Materials Research Society Symposium Proceedings Vol. 1760 Materials Research Society.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Advanced Steels

    Clemens, H., Primig, S., Mendez Martin, F., Babinsky, K., Hofer, C., Lang, D., Sackl, S. C., Turk, C. & Weißensteiner, I., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Alloying element distribution within the constituent phases of a C-containing γ-TiAl based alloy studied by atom probe tomography

    Klein, T., Mendez Martin, F., Schachermayer, M., Schöberl, T., Rashkova, B., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  30. Published

    A novel approach for site-specific atom probe specimen preparation by FIB and transmission-EBSD

    Babinsky, K., De Kloe, R., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  31. Published

    A novel approach for site-specific atom probe specimen preparation by focused ion beam and transmission electron backscatter diffraction

    Babinsky, K., De Kloe, R., Clemens, H. & Primig, S., 2014, In: Ultramicroscopy. 144, p. 9-18

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    APT/FIM and neutron diffraction study of the ordering mechanism in a Fe-Co-Mo-alloy

    Turk, C., Primig, S., Clemens, H., Leitner, H. & Kellezi, G., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  33. Published

    Atomic relaxation processes in an intermetallic Ti-43Al-4Nb-1Mo-0.1B alloy studied by mechanical spectroscopy

    Juan, J. S., Simas, P., Schmölzer, T., Clemens, H., Mayer, S. & No, M. L., 2014, In: Acta materialia. 65, p. 338-350

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Atom probe study of boron segregation in a martensitic steel prepared according to a novel FIB/t-EBSD preparation technique

    Turk, C., Babinsky, K., Haslberger, P., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  35. Published

    Atom probe study of grain boundaries in technically pure molybdenum

    Babinsky, K., Knabl, W., Lorich, A., De Kloe, R., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  36. Published

    Atom probe tomography of carbides occuring in "carbide-free" bainitic steels

    Hofer, C., Winkelhofer, F., Krammerbauer, J., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  37. Published

    B2 order transformation in a Fe - 25 at% Co - 9 at% Mo alloy

    Turk, C., Kellezi, G., Leitner, H., Gan, W., Staron, P., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  38. Published

    Characterization of the crack initiation and crack propagation behavior of welded steels by means of the replica technique

    Panzenböck, M., Horn, A., Posch, G. & Clemens, H., 2014, In: Practical metallography = Praktische Metallographie. 51, p. 557-567

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Combining Fib, t-EBSD and atom probe tomography for full chemical and crystallographic materials characterization

    Babinsky, K., De Kloe, R., Haslberger, P., Hofer, C., Lang, D., Turk, C., Clemens, H. & Primig, S., 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  40. Published

    Constitutive analysis and microstructure evolution of the high-temperature deformation behavior of an advanced intermetallic multi-phase gamma-TiAl-based alloy

    Werner, R., Schwaighofer, E., Schloffer, M., Clemens, H., Lindemann, J. & Mayer, S., 2014, Advanced Materials Research. p. 807-812

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Constitutive analysis of the flow curve behavior of an intermetallic beta-solidifying gamma-TiAl-based alloy and microstructural characterization of the deformed state

    Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Constitutive analysis of the flow curve behavior of an intermetallic beta-solidifying gamma-TiAl-based alloy and microstructural characterization of the deformed state

    Werner, R., Lindemann, J., Clemens, H. & Mayer, S., 2014, In: Berg- und hüttenmännische Monatshefte : BHM. 159, p. 286-288

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Development status, applications and perspectives of advanced intermetallic titanium aluminides

    Clemens, H. & Mayer, S., 2014, Materials Science Forum. p. 15-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Die Rolle der Metallographie bei Entwicklung und Charakterisierung von Hochleistungswerkstoffen

    Mayer, S., Hawranek, G., Mendez Martin, F., Panzenböck, M., Pölzl, S., Primig, S., Rashkova, B. & Clemens, H., 2014, Sonderbände der Praktischen Metallographie 46. p. 3-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Distribution of alloying elements within the constituent phases of a C-containing gamma-TiAl based alloy studied by atom probe tomography: Mater. Res. Soc. Symp. Proc. Vol.1760 2014 Materials Research Society

    Klein, T., Mendez Martin, F., Schachermayer, M., Rashkova, B., Clemens, H. & Mayer, S., 2014

    Research output: Non-textual form › Web publication/site › Research

  46. Published

    EBSD Untersuchungen von warmumgeformten Superduplexstahl

    Primig, S., Ragger, K., Clemens, H. & Buchmayr, B., 2014, Sonderbände der Praktischen Metallographie 46. p. 107-112

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Effect of carbon addition on solidification behavior, phase evolution and creep properties of an intermetallic beta-stabilized gamma-TiAl based alloy

    Schwaighofer, E., Rashkova, B., Clemens, H., Stark, A. & Mayer, S., 2014, In: Intermetallics. 46, p. 173-184

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Einfluss der diskontinuierlichen Ausscheidung auf das Kriechverhalten einer beta-erstarrenden gamma-TiAl-Basislegierung

    Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 189-194

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Einfluss der diskontinuierlichen Ausscheidung auf das Kriechverhalten einer β-erstarrenden γ-TiAl-Basislegierung

    Kastenhuber, M., Lehner, A., Hawranek, G., Krajnc, B., Clemens, H. & Mayer, S., 2014, p. 189-194.

    Research output: Contribution to conference › Presentation › Research › peer-review

  50. Published

    Einfluss der Präparationstechnik bei der Bestimmung des µ-Phasenanteils in einer Fe-25Co-15Mo Legierung mittels XRD

    Turk, C., Kellezi, G., Leitner, H., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 101-106

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Einfluss der Präparationstechnik bei der Bestimmung des µ-Phasenanteils in einer Fe-25Co-15Mo Legierung mittels XRD

    Turk, C., Kellezi, G., Leitner, H., Clemens, H. & Primig, S., 2014, p. 101-106.

    Research output: Contribution to conference › Presentation › Research › peer-review

  52. Published

    Elektrolytisches Polieren vs. Vibrationspolieren: Entwicklung einer Präparationsmethode zur EBSD-Analyse der Mo-Basislegierung MHC

    Lang, D., Schatte, J., Clemens, H. & Primig, S., 2014, Sonderbände der Praktischen Metallographie 46. p. 59-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 12 3 4 5 6 7 8 9 ...13 Next
View graph of relations

Latest Research Output

View more (626)