Helmut Clemens

(Former)

81 - 100 out of 626Page size: 20

Research output

  1. 2019
  2. Published

    Microstructural Evolution and Mechanical Properties of an Advanced γ-TiAl Based Alloy Processed by Spark Plasma Sintering

    Wimler, D., Lindemann, J., Clemens, H. & Mayer, S., 9 May 2019, In: Materials. 12.2019, 9, 12 p., 1523.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Thermal Expansion and Other Thermodynamic Properties of α2-Ti3Al and γ-TiAl Intermetallic Phases from First Principles Methods

    Holec, D., Abdoshahi, N., Mayer, S. & Clemens, H., 19 Apr 2019, In: Materials. 12.2019, 8, 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Kornfeinung ausscheidungsverfestigter Hochtemperaturferrite mittels Ce-haltiger Einschlüsse

    Godor, F. R., Mayerhofer, A., Presoly, P., Clemens, H., Mayer, S. & Bernhard, C., 4 Apr 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 5, p. 220-224 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Deformation-induced phase transformation in a Co-Cr-W-Mo alloy studied by high-energy X-ray diffraction during in-situ compression tests

    Weißensteiner, I., Petersmann, M., Erdely, P., Stark, A., Antretter, T., Clemens, H. & Maier-Kiener, V., Feb 2019, In: Acta materialia. 164.2019, February, p. 272-282 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    In situ and atomic-scale investigations of the early stages of γ precipitate growth in a supersaturated intermetallic Ti-44Al-7Mo (at.%) solid solution

    Erdely, P., Staron, P., Stark, A., Klein, T., Clemens, H. & Mayer, S., Feb 2019, In: Acta materialia. 164.2019, February, p. 110-121 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Combination of Nanoindentation and Microscopy for the Examination of Aluminum Alloys in Coarse- and Ultrafine-Grained Condition

    Kappacher, J., Leitner, A., Clemens, H. & Maier-Kiener, V., 9 Jan 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 7, p. 432-442 11 p.

    Research output: Contribution to journal › Article › Research

  8. Published

    Evidence of an orthorhombic transition phase in a Ti-44Al-3Mo (at.%) alloy using in situ synchrotron diffraction and transmission electron microscopy

    Musi, M., Erdely, P., Rashkova, B., Clemens, H., Stark, A., Staron, P., Schell, N. & Mayer, S., Jan 2019, In: Materials characterization. 147.2019, January, p. 398-405 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Ausgewählte Methoden der quantitativen Phasenanalyse einer additiv gefertigten TNM-Titanaluminid-Legierung

    Wartbichler, R., Bürstmayr, R., Clemens, H. & Mayer, S., 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 4, p. 220-229 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Beryllium – A challenge for preparation and mechanical characterization

    Siller, M., Kappacher, J., Rolli, R., Clemens, H. & Maier-Kiener, V., 2019, In: Practical metallography = Praktische Metallographie. 56.2019, 10, p. 624-633 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Exploring the mechanical character of molybdenum grain boundaries via nanoindentation and three-point-bending

    Jakob, S., Leitner, A., Hohenwarter, A., Lorich, A., Knabl, W., Clemens, H., Pippan, R. & Maier-Kiener, V., 2019.

    Research output: Contribution to conference › Poster › Research

  12. Published

    Formation of an orthorhombic transition phase in a Ti-Al-3Mo alloy: in situ synchrotron diffraction and TEM studies

    Rashkova, B., Musi, M., Erdely, P., Stark, A., Staron, P., Schell, N., Clemens, H. & Mayer, S., 2019.

    Research output: Contribution to conference › Poster › Research

  13. Published

    High-Resolution characterization of intermetallic TiAI-Powder for additive Manufacturing

    Wimler, D., Gammer, C., Eckert, J., Mendez Martin, F., Lindemann, J., Clemens, H. & Mayer, S., 2019, Euro PM2019 - Powders for AM - Powder Production. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Materialographie intermetallischer Titanaluminide - die (additive) Fertigung macht den Unterschied

    Mayer, S., Schimbäck, D., Wartbichler, R., Wimler, D. & Clemens, H., 2019, Praktische Metallographie Sonderband 53. p. 21-30

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Mikrostrukturelle Charakterisierung einer pulvermetallurgisch hergestellten mehrphasigen TiAl-Legierung

    Burtscher, M., Pürstl, F., Schloffer, M., Mayer, S. & Clemens, H., 2019, In: Berg- und hüttenmännische Monatshefte : BHM. 164.2019, 5, p. 210 - 214 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Mikrostruktur- und Phasenanalyse einer additiv gefertigten intermetallischen TiAl Legierung mittels metallographischer Methoden und hochenergetischer Röntgenstrahlung

    Jop, M., Wartbichler, R., Staron, P., Maawad, E., Mayer, S. & Clemens, H., 2019, Praktische Metallographie Sonderband 53. p. 155-162

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Thermally activated deformation mechanisms – High temperature nanoindentation on W-Re alloys

    Kappacher, J., Wurmshuber, M., Leitner, A., Kiener, D., Clemens, H. & Maier-Kiener, V., 2019.

    Research output: Contribution to conference › Poster › Research

  18. 2018
  19. E-pub ahead of print

    Metallurgical processing of titanium aluminides on industrial scale

    Güther, V., Allen, M., Klose, J. & Clemens, H., 26 Sept 2018, (E-pub ahead of print) In: Intermetallics. 103.2018, December, p. 12-22 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Die Grenzen der Austenitrückkonstruktion eines mehrphasigen Stahles in unterschiedlichen Gefügemodifikationen

    Weißensteiner, I., Thomas, H., Clemens, H. & Maier-Kiener, V., 19 Sept 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 301-306 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. E-pub ahead of print

    Lattice and phase strain evolution during tensile loading of an intermetallic, multi-phase γ-TiAl based alloy

    Erdely, P., Staron, P., Maawad, E., Schell, N., Clemens, H. & Mayer, S., 27 Jul 2018, (E-pub ahead of print) In: Acta materialia. 158.2018, 1 October, p. 193-205 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Grain boundary segregation engineering in as-sintered molybdenum for improved ductility

    Leitner, K., Lutz, D., Knabl, W., Eidenberger-Schober, M., Huber, K., Lorich, A., Clemens, H. & Maier-Kiener, V., 20 Jul 2018, In: Scripta materialia. 156.2018, November, p. 60-63 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...32 Next
View graph of relations

Latest Research Output

View more (626)