Helmut Clemens

(Former)

101 - 150 out of 626Page size: 50

Research output

  1. 2018
  2. Published

    High-resolution characterization of the martensite-austenite constituent in a carbide-free bainitic steel

    Hofer, C., Bliznuk, V., Verdiere, A., Petrov, R., Winkelhofer, F., Clemens, H. & Primig, S., 10 Jul 2018, In: Materials characterization. 144.2018, October, p. 182-190 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Effect of Morphological Differences on the Cold Formability of an Isothermally Heat-Treated Advanced High-Strength Steel

    Weißensteiner, I., Suppan, C., Hebesberger, T., Winkelhofer, F., Clemens, H. & Maier-Kiener, V., 10 Apr 2018, In: JOM. 70.2018, 8, p. 1567-1575 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. E-pub ahead of print

    Intermetallics: Tailoring microstructure and chemical composition of advanced γ-TiAl based alloys for improved creep resistance

    Kastenhuber, M., Klein, T., Clemens, H. & Mayer, S., 2 Apr 2018, (E-pub ahead of print) In: Intermetallics. 97.2018, June, p. 27-33 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. E-pub ahead of print

    Pathways of phase transformation in β-phase-stabilized σ/γ-TiAl alloys subjected to two-step heat treatments

    Klein, T., Holec, D., Clemens, H. & Mayer, S., 9 Mar 2018, (E-pub ahead of print) In: Scripta materialia. 149.2018, May, p. 70-74 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. E-pub ahead of print

    Pulvermetallurgische Herstellung von innovativen Hochtemperaturwerkstoffen

    Clemens, H., Mayer, S. & Heilmaier, M., 5 Feb 2018, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 5, p. 270-276 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    How grain boundary chemistry controls the fracture mode of molybdenum

    Leitner, K., Scheiber, D., Jakob, S., Primig, S., Clemens, H., Povoden-Karadeniz, E. & Romaner, L., 9 Jan 2018, In: Materials and Design. 142.2018, 15 March, p. 36-43 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Advanced Titanium Aluminides - How to Improve the Creep Resistance via Compsitional and Microstructural Optimization

    Mayer, S., Kastenhuber, M. & Clemens, H., 2018, Materials Science Forum. Vol. 941.2018. p. 1484-1489 6 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  9. Published

    Aspects of Powder Characterization for Additive Manufacturing

    Wimler, D., Kardos, S., Lindemann, J., Clemens, H. & Mayer, S., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 9, p. 620-636 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Aspekte der Pulvercharakterisierung für die additive Fertigung

    Wimler, D., Kardos, S., Lindemann, J., Clemens, H. & Mayer, S., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 219-228

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Ausgewählte Methoden der quantitativen Phasenanalyse einer additiv gefertigten TNM-Titanaluminid-Legierung

    Wartbichler, R., Bürstmayr, R., Clemens, H. & Mayer, S., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 327-332

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Beryllium - Eine Herausforderung für Präparation und mechanische Charakterisierung

    Siller, M., Kappacher, J., Rolli, R., Clemens, H. & Maier-Kiener, V., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 183-188

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Characterization of anisotropic pores and spatially oriented precipitates in sintered Mo-base alloys using small-angle neutron scattering

    Karge, L., Lang, D., Schatte, J., Gilles, R., Busch, S., Leibenguth, P., Clemens, H. & Petry, W., 2018, In: Journal of applied crystallography. 51.2018, p. 1706-1714 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Deformation behaviour of γ-TiAl based sheets studied by means of in situ synchrotron X-ray diffraction

    Erdely, P., Maawad, E., Staron, P., Schell, N., Clemens, H. & Mayer, S., 2018.

    Research output: Contribution to conference › Poster › Research

  15. Published

    H-carbide precipitation behaviour in a C-containing β-solidifying TiAl alloy

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Klein, T., Mayer, S. & Clemens, H., 2018.

    Research output: Contribution to conference › Poster › Research

  16. Published

    Impact of the Microstructure of Refractory Metals on their Mechanical Properties - a Multi-Scale Study / Wie die Mikrostruktur von Refraktärmetallen deren mechanische Eigenschaften beeinflusst – eine skalenübergreifende Studie

    Maier-Kiener, V., Siller, M., Jakob, S., Leitner, K., Clemens, H., Lorich, A., Lang, D., Schatte, J., Eidenberger-Schober, M. & Knabl, W., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 9, p. 603-619 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Interaction of precipitation, recovery and recrystallization in the Mo-Hf-C alloy MHC studied by multipass compression tests

    Siller, M., Lang, D., Schatte, J., Knabl, W., Clemens, H. & Maier-Kiener, V., 2018, In: International journal of refractory metals & hard materials. 73.2018, June, p. 199-203 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Investigation of the Precipitation Behavior of H-Carbides in a TiAl Alloy containing Carbon by means of in- and ex-situ Characterization

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 10, p. 693-703 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Kombination von Nanoindentation und Mikroskopie zur Untersuchung von Aluminium-Legierungen im grob- und ultrafeinkörnigen Zustand

    Kappacher, J., Leitner, A., Clemens, H. & Maier-Kiener, V., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 177-182

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Kornfeinung ausscheidungsverfestigter Hochtemperaturferrite mittels Ce-haltiger Einschlüsse

    Godor, F. R., Mayerhofer, A., Presoly, P., Clemens, H., Mayer, S. & Bernhard, C., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 319-324

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Metallographische Methoden der Pulvercharacterisierung für die additive Fertigung

    Wimler, D., Kardos, S., Clemens, H. & Mayer, S., 2018, In: Jahresmagazin Materialographie, Metallographie : Ingenieurwissenschaften ... : im Fokus. 2018, p. 64-68

    Research output: Contribution to journal › Article › Research

  22. Published

    Mikrostrukturelle Charakterisierung einer pulvermetallurgisch hergestellten mehrphasigen TiAl-Legierung

    Burtscher, M., Pürstl, F., Schloffer, M., Mayer, S. & Clemens, H., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 151-156

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Mikrostrukturelle Charakterisierung von Molybdän- Korngrenzen mittels Mikrosäulen-Druckversuchen und Atomsondenuntersuchungen

    Jakob, S., Lorich, A., Eidenberger-Schober, M., Knabl, W., Clemens, H. & Maier-Kiener, V., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 171-176

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Multi-Scale Microstructural Characterization: The Role of Classic and High-Resolution Metallography in the Developement of Modern High-Performance Materials

    Schnitzer, R., Hofer, C., Mayer, S., Panzenböck, M., Holec, D. & Clemens, H., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 9, p. 584-602 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Skalenübergreifende Gefügechatakterisierung - Die Rolle der klassischen und hochauflösenden Metallographie bei der Entwicklung moderner Hochleistungswerkstoffe

    Schnitzer, R., Hofer, C., Mayer, S., Panzenböck, M., Holec, D. & Clemens, H., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 23-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Strain-induced martensitic transformation in a Co-Cr-W-Mo alloy probed by nanoindentation

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 2018, Proceedings of the International Conference on Martensitic Transformations. p. 247-250

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Synchrotron X-rays in the development of multi-phase intermetallic TiAl alloys

    Erdely, P., Staron, P., Stark, A., Maawad, E., Schell, N., Clemens, H. & Mayer, S., 2018.

    Research output: Contribution to conference › Poster › Research

  28. Published

    Wie die Mikrostruktur von Hochleistungswerkstoffen deren mechanische Eigenschaften beeinflusst - eine skalenübergreifende Studie

    Maier-Kiener, V., Siller, M., Jakob, S., Leitner, K., Clemens, H., Lorich, A., Lang, D., Schatte, J., Eidenberger-Schober, M. & Knabl, W., 2018, Fortschritte in der Metallographie : Sonderbände der Praktischen Metallographie. 1 ed. DGM, Vol. 52. p. 3-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. 2017
  30. Published

    Complementary High Spatial Resolution Methods in Materials Science and Engineering

    Paris, O., Lang, D., LI, J., Schumacher, P., Deluca, M., Daniel, R., Tkadletz, M., Schalk, N., Mitterer, C., Todt, J., Keckes, J., Zhang, Z., Popovski, G., Ganser, C., Teichert, C. & Clemens, H., 31 Dec 2017, In: Advanced engineering materials. 19.2017, 4, 22 p., 1600671.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Impact of Alloying on Stacking Fault Energies in γ-TiAl

    Dumitraschkewitz, P., Clemens, H., Mayer, S. & Holec, D., 17 Nov 2017, In: Applied Sciences : open access journal. 7.2017, 11, 11 p., 1193.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Design and control of microstructure and texture by thermomechanical processing of a multi-phase TiAl alloy

    Spörk, P., Staron, P., Maawad, E., Schell, N., Klose, J., Clemens, H. & Mayer, S., 5 Oct 2017, In: Materials and Design. 131.2017, 5 October, p. 286-296 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. E-pub ahead of print

    On grain boundary segregation in molybdenum materials

    Leitner, K., Felfer, P. J., Holec, D., Cairney, J. M., Knabl, W., Lorich, A., Clemens, H. & Primig, S., 11 Sept 2017, (E-pub ahead of print) In: Materials and Design. 135.2017, 5 December, p. 204-212 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. E-pub ahead of print

    Phase transformations in a β-solidifying γ-TiAl based alloy during rapid solidification

    Kastenhuber, M., Klein, T., Rashkova, B., Weißensteiner, I., Clemens, H. & Mayer, S., 1 Sept 2017, (E-pub ahead of print) In: Intermetallics. 91.2017, December, p. 100-109 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Crack path identification in a nanostructured pearlitic steel using atom probe tomography

    Leitner, T., Sackl, S., Völker, B., Riedl, H., Clemens, H., Pippan, R. & Hohenwarter, A., 24 Aug 2017, In: Scripta Materialia. 142.2018, 1 January, p. 66-69 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Insights into the deformation behavior of the CrMnFeCoNi high-entropy alloy revealed by elevated temperature nanoindentation

    Maier-Kiener, V., Schuh, B., George, E. P., Clemens, H. & Hohenwarter, A., 1 Jul 2017, In: Journal of materials research (JMR). 32.2017, 14, p. 2658-2667 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. E-pub ahead of print

    Internal friction and atomic relaxation processes in an intermetallic Mo-rich Ti-44Al-7Mo (γ+βo) model alloy

    Usategui, L., No, M. L., Mayer, S., Clemens, H. & Juan, J. S., 9 Jun 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700.2017, 17 July, p. 495-502 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. E-pub ahead of print

    Atom probe study of B2 order and A2 disorder of the FeCo matrix in an Fe-Co-Mo-alloy

    Turk, C., Leitner, H., Schemmel, I., Clemens, H. & Primig, S., 19 Mar 2017, (E-pub ahead of print) In: Micron. 98.2017, July, p. 24-33 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. E-pub ahead of print

    Intermetallic β-Solidifying γ-TiAl Based Alloys − From Fundamental Research to Application

    Mayer, S., Erdely, P., Fischer, F.-D., Holec, D., Kastenhuber, M., Klein, T. & Clemens, H., 23 Feb 2017, (E-pub ahead of print) In: Advanced engineering materials. 19.2017, 4, 27 p., 1600735.

    Research output: Contribution to journal › Article › Research › peer-review

  40. E-pub ahead of print

    Mechanical behavior and related microstructural aspects of a nano-lamellar TiAl alloy at elevated temperatures

    Klein, T., Usategui, L., Rashkova, B., Nó, M. L., San Juan, J. M., Clemens, H. & Mayer, S., 20 Feb 2017, (E-pub ahead of print) In: Acta materialia. 128.2017, 15 April, p. 440-450 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    The Use of Fluorine to Protect β-Solidifying γ-TiAl-Based Alloys against High-Temperature Oxidation

    Donchev, A., Galetz, M., Mayer, S., Clemens, H. & Schütze, M., 13 Feb 2017, In: MRS Advances. 2017, May, p. 1361-1367 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. E-pub ahead of print

    Impact of Mo on the ωo phase in β-solidifying TiAl alloys: An experimental and computational approach

    Klein, T., Schachermayer, M., Holec, D., Rashkova, B., Clemens, H. & Mayer, S., 1 Feb 2017, (E-pub ahead of print) In: Intermetallics. 85.2017, June, p. 26-33 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Influence of Heat Treatment on Microstructure Stability and Mechanical Properties of a Carbide-Free Bainitic Steel

    Hofer, C., Primig, S., Clemens, H., Winkelhofer, F. & Schnitzer, R., 7 Jan 2017, In: Advanced engineering materials. 19.2017, 4, 5 p., 1600658.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Advanced Intermetallic TiAl Alloys

    Clemens, H. & Mayer, S., 2017, Materials Science Forum. 879 ed. Vol. 2017. p. 113-118 6 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  45. Published

    Application of Photons and Neutrons for the Characterization and Development of Advanced Steels

    Eidenberger-Schober, E., Schnitzer, R., Zickler, G., Eidenberger-Schober, M., Bischof, M., Staron, P., Leitner, H., Schreyer, A. & Clemens, H., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science : From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 377-394

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  46. Published

    Atom probe study of prior austenite grain bounda-ries of zinc-coated press hardened steel

    Hofer, C., Kurz, T., Clemens, H. & Schnitzer, R., 2017, 2017 CHS2 Conference Proceedings. p. 383-390

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Characterization of a Biocompatible Co-Cr-W Alloy by means of Correlative Microscopy and Nanoindentation Experiments

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 2017.

    Research output: Contribution to conference › Poster › Research

  48. Published

    Contribution of High-Energy X-Rays and Neutrons to Characterization and Development of Intermetallic Titanium Aluminides

    Schmoelzer, T., Liss, K.-D., Staron, P., Stark, A., Schwaighofer, E., Lippmann, T., Clemens, H. & Mayer, S., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 395-424

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  49. Published

    Correlation of local mechanical properties and chemical compositin in a C-containing TiAl alloy studied by nanoindentation and atom probe tomography

    Klein, T., Schachermayer, M., Mendez Martin, F., Schöberl, T., Rashkova, B., Clemens, H. & Mayer, S., 2017.

    Research output: Contribution to conference › Poster › Research

  50. Published

    Deformation mechanisms and texture evolution in a multi-phase TiAl alloy investigated by means of synchrotron radiation

    Erdely, P., Staron, P., Maawad, E., Schell, N., Klose, J., Mayer, S. & Clemens, H., 2017.

    Research output: Contribution to conference › Poster › Research

  51. Published

    Effect of hot rolling and primary annealing on the microstructure and texture of a β-stabilised γ-TiAl based alloy

    Erdely, P., Staron, P., Maawad, E., Schell, N., Klose, J., Mayer, S. & Clemens, H., 2017, In: Acta materialia. 126.2017, March, p. 145-153 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Effect of microstructural instability on the creep resistance of an advanced intermetallic γ-TiAl based alloy

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2017, In: Intermetallics. 80.2017, January, p. 1-9 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...13 Next
View graph of relations

Latest Research Output

View more (626)