Helmut Clemens

(Former)

Research output

  1. 2018
  2. Published

    High-resolution characterization of the martensite-austenite constituent in a carbide-free bainitic steel

    Hofer, C., Bliznuk, V., Verdiere, A., Petrov, R., Winkelhofer, F., Clemens, H. & Primig, S., 10 Jul 2018, In: Materials characterization. 144.2018, October, p. 182-190 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  3. Published

    Effect of Morphological Differences on the Cold Formability of an Isothermally Heat-Treated Advanced High-Strength Steel

    Weißensteiner, I., Suppan, C., Hebesberger, T., Winkelhofer, F., Clemens, H. & Maier-Kiener, V., 10 Apr 2018, In: JOM. 70.2018, 8, p. 1567-1575 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  4. E-pub ahead of print

    Intermetallics: Tailoring microstructure and chemical composition of advanced γ-TiAl based alloys for improved creep resistance

    Kastenhuber, M., Klein, T., Clemens, H. & Mayer, S., 2 Apr 2018, (E-pub ahead of print) In: Intermetallics. 97.2018, June, p. 27-33 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  5. E-pub ahead of print

    Pathways of phase transformation in β-phase-stabilized σ/γ-TiAl alloys subjected to two-step heat treatments

    Klein, T., Holec, D., Clemens, H. & Mayer, S., 9 Mar 2018, (E-pub ahead of print) In: Scripta materialia. 149.2018, May, p. 70-74 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  6. E-pub ahead of print

    Pulvermetallurgische Herstellung von innovativen Hochtemperaturwerkstoffen

    Clemens, H., Mayer, S. & Heilmaier, M., 5 Feb 2018, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 166.2021, 5, p. 270-276 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  7. Published

    How grain boundary chemistry controls the fracture mode of molybdenum

    Leitner, K., Scheiber, D., Jakob, S., Primig, S., Clemens, H., Povoden-Karadeniz, E. & Romaner, L., 9 Jan 2018, In: Materials and Design. 142.2018, 15 March, p. 36-43 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  8. Published

    Advanced Titanium Aluminides - How to Improve the Creep Resistance via Compsitional and Microstructural Optimization

    Mayer, S., Kastenhuber, M. & Clemens, H., 2018, Materials Science Forum. Vol. 941.2018. p. 1484-1489 6 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  9. Published

    Aspects of Powder Characterization for Additive Manufacturing

    Wimler, D., Kardos, S., Lindemann, J., Clemens, H. & Mayer, S., 2018, In: Practical metallography = Praktische Metallographie. 55.2018, 9, p. 620-636 17 p.

    Research output: Contribution to journalArticleResearchpeer-review

  10. Published

    Aspekte der Pulvercharakterisierung für die additive Fertigung

    Wimler, D., Kardos, S., Lindemann, J., Clemens, H. & Mayer, S., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 219-228

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  11. Published

    Ausgewählte Methoden der quantitativen Phasenanalyse einer additiv gefertigten TNM-Titanaluminid-Legierung

    Wartbichler, R., Bürstmayr, R., Clemens, H. & Mayer, S., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 327-332

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  12. Published

    Beryllium - Eine Herausforderung für Präparation und mechanische Charakterisierung

    Siller, M., Kappacher, J., Rolli, R., Clemens, H. & Maier-Kiener, V., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 183-188

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  13. Published

    Characterization of anisotropic pores and spatially oriented precipitates in sintered Mo-base alloys using small-angle neutron scattering

    Karge, L., Lang, D., Schatte, J., Gilles, R., Busch, S., Leibenguth, P., Clemens, H. & Petry, W., 2018, In: Journal of applied crystallography. 51.2018, p. 1706-1714 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  14. Published

    Deformation behaviour of γ-TiAl based sheets studied by means of in situ synchrotron X-ray diffraction

    Erdely, P., Maawad, E., Staron, P., Schell, N., Clemens, H. & Mayer, S., 2018.

    Research output: Contribution to conferencePosterResearch

  15. Published
  16. Published
  17. Published

    Interaction of precipitation, recovery and recrystallization in the Mo-Hf-C alloy MHC studied by multipass compression tests

    Siller, M., Lang, D., Schatte, J., Knabl, W., Clemens, H. & Maier-Kiener, V., 2018, In: International journal of refractory metals & hard materials. 73.2018, June, p. 199-203 5 p.

    Research output: Contribution to journalArticleResearchpeer-review

  18. Published
  19. Published

    Kombination von Nanoindentation und Mikroskopie zur Untersuchung von Aluminium-Legierungen im grob- und ultrafeinkörnigen Zustand

    Kappacher, J., Leitner, A., Clemens, H. & Maier-Kiener, V., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 177-182

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  20. Published

    Kornfeinung ausscheidungsverfestigter Hochtemperaturferrite mittels Ce-haltiger Einschlüsse

    Godor, F. R., Mayerhofer, A., Presoly, P., Clemens, H., Mayer, S. & Bernhard, C., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 319-324

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  21. Published
  22. Published

    Mikrostrukturelle Charakterisierung einer pulvermetallurgisch hergestellten mehrphasigen TiAl-Legierung

    Burtscher, M., Pürstl, F., Schloffer, M., Mayer, S. & Clemens, H., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 151-156

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  23. Published

    Mikrostrukturelle Charakterisierung von Molybdän- Korngrenzen mittels Mikrosäulen-Druckversuchen und Atomsondenuntersuchungen

    Jakob, S., Lorich, A., Eidenberger-Schober, M., Knabl, W., Clemens, H. & Maier-Kiener, V., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 171-176

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  24. Published
  25. Published

    Skalenübergreifende Gefügechatakterisierung - Die Rolle der klassischen und hochauflösenden Metallographie bei der Entwicklung moderner Hochleistungswerkstoffe

    Schnitzer, R., Hofer, C., Mayer, S., Panzenböck, M., Holec, D. & Clemens, H., 2018, Praktische Metallographie Sonderband: Fortschritte in der Metallographie. 1 ed. Vol. 52. p. 23-34

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  26. Published

    Strain-induced martensitic transformation in a Co-Cr-W-Mo alloy probed by nanoindentation

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 2018, Proceedings of the International Conference on Martensitic Transformations. p. 247-250

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  27. Published

    Synchrotron X-rays in the development of multi-phase intermetallic TiAl alloys

    Erdely, P., Staron, P., Stark, A., Maawad, E., Schell, N., Clemens, H. & Mayer, S., 2018.

    Research output: Contribution to conferencePosterResearch

  28. Published

    Wie die Mikrostruktur von Hochleistungswerkstoffen deren mechanische Eigenschaften beeinflusst - eine skalenübergreifende Studie

    Maier-Kiener, V., Siller, M., Jakob, S., Leitner, K., Clemens, H., Lorich, A., Lang, D., Schatte, J., Eidenberger-Schober, M. & Knabl, W., 2018, Fortschritte in der Metallographie : Sonderbände der Praktischen Metallographie. 1 ed. DGM, Vol. 52. p. 3-13

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  29. 2017
  30. Published
  31. Published

    Impact of Alloying on Stacking Fault Energies in γ-TiAl

    Dumitraschkewitz, P., Clemens, H., Mayer, S. & Holec, D., 17 Nov 2017, In: Applied Sciences : open access journal. 7.2017, 11, 11 p., 1193.

    Research output: Contribution to journalArticleResearchpeer-review

  32. Published

    Design and control of microstructure and texture by thermomechanical processing of a multi-phase TiAl alloy

    Spörk, P., Staron, P., Maawad, E., Schell, N., Klose, J., Clemens, H. & Mayer, S., 5 Oct 2017, In: Materials and Design. 131.2017, 5 October, p. 286-296 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  33. E-pub ahead of print

    On grain boundary segregation in molybdenum materials

    Leitner, K., Felfer, P. J., Holec, D., Cairney, J. M., Knabl, W., Lorich, A., Clemens, H. & Primig, S., 11 Sept 2017, (E-pub ahead of print) In: Materials and Design. 135.2017, 5 December, p. 204-212 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  34. E-pub ahead of print

    Phase transformations in a β-solidifying γ-TiAl based alloy during rapid solidification

    Kastenhuber, M., Klein, T., Rashkova, B., Weißensteiner, I., Clemens, H. & Mayer, S., 1 Sept 2017, (E-pub ahead of print) In: Intermetallics. 91.2017, December, p. 100-109 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  35. Published

    Crack path identification in a nanostructured pearlitic steel using atom probe tomography

    Leitner, T., Sackl, S., Völker, B., Riedl, H., Clemens, H., Pippan, R. & Hohenwarter, A., 24 Aug 2017, In: Scripta Materialia. 142.2018, 1 January, p. 66-69 4 p.

    Research output: Contribution to journalArticleResearchpeer-review

  36. Published

    Insights into the deformation behavior of the CrMnFeCoNi high-entropy alloy revealed by elevated temperature nanoindentation

    Maier-Kiener, V., Schuh, B., George, E. P., Clemens, H. & Hohenwarter, A., 1 Jul 2017, In: Journal of materials research (JMR). 32.2017, 14, p. 2658-2667 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  37. E-pub ahead of print

    Internal friction and atomic relaxation processes in an intermetallic Mo-rich Ti-44Al-7Mo (γ+βo) model alloy

    Usategui, L., No, M. L., Mayer, S., Clemens, H. & Juan, J. S., 9 Jun 2017, (E-pub ahead of print) In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 700.2017, 17 July, p. 495-502 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  38. E-pub ahead of print

    Atom probe study of B2 order and A2 disorder of the FeCo matrix in an Fe-Co-Mo-alloy

    Turk, C., Leitner, H., Schemmel, I., Clemens, H. & Primig, S., 19 Mar 2017, (E-pub ahead of print) In: Micron. 98.2017, July, p. 24-33 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  39. E-pub ahead of print

    Intermetallic β-Solidifying γ-TiAl Based Alloys − From Fundamental Research to Application

    Mayer, S., Erdely, P., Fischer, F.-D., Holec, D., Kastenhuber, M., Klein, T. & Clemens, H., 23 Feb 2017, (E-pub ahead of print) In: Advanced engineering materials. 19.2017, 4, 27 p., 1600735.

    Research output: Contribution to journalArticleResearchpeer-review

  40. E-pub ahead of print

    Mechanical behavior and related microstructural aspects of a nano-lamellar TiAl alloy at elevated temperatures

    Klein, T., Usategui, L., Rashkova, B., Nó, M. L., San Juan, J. M., Clemens, H. & Mayer, S., 20 Feb 2017, (E-pub ahead of print) In: Acta materialia. 128.2017, 15 April, p. 440-450 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  41. Published

    The Use of Fluorine to Protect β-Solidifying γ-TiAl-Based Alloys against High-Temperature Oxidation

    Donchev, A., Galetz, M., Mayer, S., Clemens, H. & Schütze, M., 13 Feb 2017, In: MRS Advances. 2017, May, p. 1361-1367 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  42. E-pub ahead of print

    Impact of Mo on the ωo phase in β-solidifying TiAl alloys: An experimental and computational approach

    Klein, T., Schachermayer, M., Holec, D., Rashkova, B., Clemens, H. & Mayer, S., 1 Feb 2017, (E-pub ahead of print) In: Intermetallics. 85.2017, June, p. 26-33 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  43. Published

    Influence of Heat Treatment on Microstructure Stability and Mechanical Properties of a Carbide-Free Bainitic Steel

    Hofer, C., Primig, S., Clemens, H., Winkelhofer, F. & Schnitzer, R., 7 Jan 2017, In: Advanced engineering materials. 19.2017, 4, 5 p., 1600658.

    Research output: Contribution to journalArticleResearchpeer-review

  44. Published

    Advanced Intermetallic TiAl Alloys

    Clemens, H. & Mayer, S., 2017, Materials Science Forum. 879 ed. Vol. 2017. p. 113-118 6 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  45. Published

    Application of Photons and Neutrons for the Characterization and Development of Advanced Steels

    Eidenberger-Schober, E., Schnitzer, R., Zickler, G., Eidenberger-Schober, M., Bischof, M., Staron, P., Leitner, H., Schreyer, A. & Clemens, H., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science : From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 377-394

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  46. Published

    Atom probe study of prior austenite grain bounda-ries of zinc-coated press hardened steel

    Hofer, C., Kurz, T., Clemens, H. & Schnitzer, R., 2017, 2017 CHS2 Conference Proceedings. p. 383-390

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  47. Published
  48. Published

    Contribution of High-Energy X-Rays and Neutrons to Characterization and Development of Intermetallic Titanium Aluminides

    Schmoelzer, T., Liss, K.-D., Staron, P., Stark, A., Schwaighofer, E., Lippmann, T., Clemens, H. & Mayer, S., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 395-424

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  49. Published
  50. Published

    Deformation mechanisms and texture evolution in a multi-phase TiAl alloy investigated by means of synchrotron radiation

    Erdely, P., Staron, P., Maawad, E., Schell, N., Klose, J., Mayer, S. & Clemens, H., 2017.

    Research output: Contribution to conferencePosterResearch

  51. Published

    Effect of hot rolling and primary annealing on the microstructure and texture of a β-stabilised γ-TiAl based alloy

    Erdely, P., Staron, P., Maawad, E., Schell, N., Klose, J., Mayer, S. & Clemens, H., 2017, In: Acta materialia. 126.2017, March, p. 145-153 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  52. Published

    Effect of microstructural instability on the creep resistance of an advanced intermetallic γ-TiAl based alloy

    Kastenhuber, M., Rashkova, B., Clemens, H. & Mayer, S., 2017, In: Intermetallics. 80.2017, January, p. 1-9 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  53. Published

    In situ Experiments with Synchrotron High-Energy X-rays and Neutrons

    Staron, P., Fischer, T., Lippmann, T., Stark, A., Daneshpour, S., Schnubel, D., Uhlmann, E., Gerstenberger, R., Camin, B., Reimers, W., Eidenberger, E., Clemens, H., Huber, N. & Schreyer, A., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 365-376

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  54. Published

    Interaction of precipitation, recovery and recrystallization in the Mo-Hf-C alloy MHC studied by multipass compression tests

    Siller, M., Lang, D., Schatte, J., Knabl, W., Clemens, H. & Maier-Kiener, V., 2017, 19th Plansee Seminar. p. 21/1-21/10

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  55. Published

    Microstructure and Properties of Engineering Materials

    Clemens, H., Mayer, S. & Scheu, C., 2017, Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications. 2 ed. Wiley-VCH , p. 3-20

    Research output: Chapter in Book/Report/Conference proceedingChapterResearch

  56. Published

    Nanoindentation testing as a powerful screening tool for assessing phase stability of nanocrystalline high-entropy alloys

    Maier-Kiener, V., Schuh, B., George, E. P., Clemens, H. & Hohenwarter, A., 2017, In: Materials and Design. 115.2017, 5 February, p. 479-485 7 p.

    Research output: Contribution to journalArticleResearchpeer-review

  57. Published

    Neutrons and Synchrotron Radiation in Engineering Materials Science: From Fundamentals to Applications

    Staron, P., Schreyer, A., Clemens, H. & Mayer, S., 2017, 2 ed. Wiley-VCH . 462 p.

    Research output: Book/ReportScholarly edition

  58. Published

    Physical metallurgy of the molybdenum base alloy MHC

    Lang, D., Schatte, J., Knabl, W. & Clemens, H., 2017, 19th Plansee Seminar. p. 5/1-5/9

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  59. Published

    Thermodynamic evaluation of the Mo-rich corner of the Mo-Hf-C system including O impurities

    Lang, D., Povoden-Karadeniz, E., Schatte, J., Knabl, W., Clemens, H. & Primig, S., 2017, In: Journal of alloys and compounds. 695.2017, 25 February, p. 372-381 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  60. Published

    Untersuchungen des Ausscheidungsverhaltens von H-Karbiden in einer kohlenstoffhaltigen TiAl Legierung mittels in- und ex-situ Experimenten

    Burtscher, M., Kirchheimer, K., Weißensteiner, I., Bernhard, C., Lederhaas, B., Klein, T., Mayer, S. & Clemens, H., 2017, Praktische Metallographie Sonderband 51. p. 55-60

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  61. Published
  62. 2016
  63. Published
  64. Published

    Creep Behavior of a β-solidifying TiAl Alloy with Fully Lamellar Microstructure

    Burtscher, M., Klein, T., Mayer, S. & Clemens, H., 28 Nov 2016.

    Research output: Contribution to conferencePresentationResearch

  65. Published

    Improved ductility and toughness of an FeCoMo alloy

    Turk, C., Kellezi, G., Schemmel, I., Leitner, H. & Clemens, H., 5 Oct 2016.

    Research output: Contribution to conferencePresentationResearch

  66. Published

    Advancement of Compositional and Microstructural Design of Intermetallic γ-TiAl Based Alloys Determined by Atom Probe Tomography

    Klein, T., Clemens, H. & Mayer, S., 6 Sept 2016, In: Materials. 9.2016, 9, p. 755-774 20 p., 755.

    Research output: Contribution to journalArticleResearchpeer-review

  67. Published

    Induction Tempering vs Conventional Tempering of a Heat-Treatable Steel

    Sackl, S. C., Zuber, C., Clemens, H. & Primig, S., 3 May 2016, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 47.2016, July, p. 3694-3703 9 p.

    Research output: Contribution to journalArticleResearchpeer-review

  68. Published

    Phase Characterization of a Biocompatible Co-Cr-W Alloy by means of Correlative Microscopy

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 28 Apr 2016.

    Research output: Contribution to conferencePresentationResearch

  69. Published

    Transmission Kikuchi Diffraction: A technique to support the atom probe specimen preparation

    Babinsky, K., Primig, S. & Clemens, H., 28 Apr 2016.

    Research output: Contribution to conferencePresentationResearch

  70. Published

    Textur- und Gefügeentwicklung in warmgewalzten und wärmebehandelten TNM-Blechen

    Erdely, P., Staron, P., Maawad, E., Schell, N., Bartels, A., Güther, V., Rothe, C., Klose, J., Mayer, S. & Clemens, H., 13 Apr 2016, p. 1-13.

    Research output: Contribution to conferencePresentationResearch

  71. Published

    Designkriterien für kriechfeste Titanaluminid-Legierungen

    Clemens, H. & Mayer, S., 12 Apr 2016, p. 1-18.

    Research output: Contribution to conferencePresentationResearch

  72. Published

    Korngrenzen in technisch reinem Molybdän: Eine atomare Untersuchung mittels Atomsondentomographie

    Babinsky, K., Primig, S., Knabl, W., Lorich, A., Clemens, H. & Sackl, S. C., 12 Apr 2016, p. 1-15. 15 p.

    Research output: Contribution to conferencePresentationResearch

  73. Published

    MATERIAL FOR A GAS TURBINE COMPONENT, METHOD FOR PRODUCING A GAS TURBINE COMPONENT AND GAS TURBINE COMPONENT

    Smarsly, W. (Inventor), Clemens, H. (Inventor), Guether, V. (Inventor), Kremmer, S. (Inventor), Otto, A. (Inventor) & Chladil, H. (Inventor), 29 Feb 2016, IPC No. C22F 1/ 18 A I, Patent No. PL2227571T, Priority date 18 Oct 2008, Priority No. EP20080841961

    Research output: Patent

  74. Published
  75. Published

    In Situ Characterization Techniques Based on Synchrotron Radiation and Neutrons Applied for the Development of an Engineering Intermetallic Titanium Aluminide Alloy

    Erdely, P., Schmoelzer, T., Schwaighofer, E., Clemens, H., Staron, P., Stark, A., Liss, K.-D. & Mayer, S., 4 Jan 2016, In: Metals : open access journal . 6.2016, 1, p. 1-27 27 p.

    Research output: Contribution to journalArticleResearchpeer-review

  76. Published

    Advanced Intermetallic Titanium Aluminides

    Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conferencePresentationResearch

  77. Published

    Advanced Intermetallic Titanium Aluminides

    Clemens, H., Smarsly, W., Güther, V. & Mayer, S., 2016, 13th World Conference on Titanium. USA, p. 1189–1200 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  78. Published

    Alloy Design Rules for Advanced Titanium Aluminides

    Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conferencePresentationResearch

  79. Published

    Alloy Design Rules for Advanced Titanium Aluminides

    Clemens, H. & Mayer, S., 2016.

    Research output: Contribution to conferencePresentationResearch

  80. Published

    Analyse einer Co-Cr-W Legierung mittels korrelativer Mikroskopie und Nanoindentation

    Weißensteiner, I., Voigt, P., Clemens, H. & Maier-Kiener, V., 2016.

    Research output: Contribution to conferencePresentationResearch

  81. Published
  82. Published
  83. Published

    Correlative microscopy of a carbide-free bainitic steel

    Hofer, C., Bliznuk, V., Verdiere, A., Petrov, R., Winkelhofer, F., Clemens, H. & Primig, S., 2016, In: Micron. 81, p. 1-7

    Research output: Contribution to journalArticleResearchpeer-review

  84. Published

    Correlative study of grain boundary segregation in sintered molybdenum alloys

    Lutz, D., Leitner, K., Huber, K., Lorich, A., Maier-Kiener, V. & Clemens, H., 2016.

    Research output: Contribution to conferencePresentationResearch

  85. Published
  86. Published

    Effect of different bainite morphologies on the formability of advanced high strength steels

    Weißensteiner, I., Hebesberger, T. & Clemens, H., 2016.

    Research output: Contribution to conferencePosterResearch

  87. Published

    Einfluss von Aluminium auf die Karbidbildung im Schnellarbeitsstahl

    Kellezi, G., Leitner, H. & Clemens, H., 2016, In: Berg- und hüttenmännische Monatshefte : BHM. 161, 3, p. 108-115 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  88. Published

    Evolution of strain-induced hafnium carbides in a molybdenum base MoeHfeC alloy studied by small-angle neutron scattering and complementary methods

    Lang, D., Karge, L., Schatte, J., Gilles, R., Dallinger, R., Weißensteiner, I., Staron, P., Knabl, W., Primig, S. & Clemens, H., 2016, In: Journal of alloys and compounds. 688, p. 619-631 13 p.

    Research output: Contribution to journalArticleResearchpeer-review

  89. Published

    Evolution of texture and microstructure in multi-phase TNM sheets during hot rolling and subsequent heat treatments

    Erdely, P., Staron, P., Maawad, E., Schell, N., Güther, V., Rothe, C., Klose, J., Clemens, H. & Mayer, S., 2016. 1 p.

    Research output: Contribution to conferencePosterResearch

  90. Published

    Experimental and theoretical evidence of displacive martensite in an intermetallic Mo-containing Ƴ-TiAl based alloy

    Mayer, S., Petersmann, M., Fischer, F. D., Clemens, H., Waitz, T. & Antretter, T., 2016, In: Acta materialia. 115, p. 242-249 8 p.

    Research output: Contribution to journalArticleResearchpeer-review

  91. Published

    Forged Intermetallic γ-TiAl Based Alloy Low Pressure Turbine Blade in the Geared Turbofan

    Habel, U., Heutling, D., Kunze, C., Smarsly, W., Das, G. & Clemens, H., 2016, 13th World Conference on Titanium. USA, p. 1223–1227 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  92. Published

    Fracture Behavior and Delamination Toughening of Molybdenum in Charpy Impact Tests

    Leitner, K., Primig, S., Knabl, W., Lorich, A., Stickler, R. & Clemens, H., 2016, In: JOM. 68, 11, p. 2854-2863 10 p.

    Research output: Contribution to journalArticleResearchpeer-review

  93. Published

    Impact of the B2 ordering behavior on the mechanical properties of a Fe Co Mo alloy

    Turk, C., Leitner, H., Kellezi, G., Clemens, H., Gan, W., Staron, P. & Primig, S., 2016, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 662, p. 511-518 8 p., 662.

    Research output: Contribution to journalArticleResearchpeer-review

  94. Published

    Improved ductility and toughness of a Fe-Co-Mo alloy

    Turk, C., Kellezi, G., Schemmel, I., Leitner, H. & Clemens, H., 2016, 10th TOOL Conference 2016 – Tool 2016 – DoubleTree by Hilton Hotel Bratislava. p. 112-129 8 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  95. Published

    Influence of impurities on the fracture behavior of molybdenum-hafnium alloys

    Babinsky, K., Primig, S., Knabl, W., Lorich, A. & Clemens, H., 2016.

    Research output: Contribution to conferencePresentationResearch

  96. Published

    Intermetallic titanium aluminides in aerospace applications – processing, microstructure and properties

    Clemens, H. & Mayer, S., 2016, In: Materials at High Temperatures. 33, p. 560-570 11 p.

    Research output: Contribution to journalArticleResearchpeer-review

  97. Published

    Metallographie & Werkstoffentwicklung: Eine persönliche Bestandsaufnahme

    Clemens, H., 2016.

    Research output: Contribution to conferencePresentationResearch

  98. Published

    Microstructural and mechanical characterization of a hot-extruded TiAl alloy for high-performance racing applications

    Lehmann, O., Burtscher, M., Klein, T., Lindemann, J., Güther, V., Fellmann, H. & Clemens, H., 2016.

    Research output: Contribution to conferencePresentationResearch

  99. Published
  100. Published

    Modeling Concepts for Intermetallic Titanium Aluminides

    Appel, F., Clemens, H. & Fischer, F. D., 2016, In: Progress in materials science. 81, p. 55-124

    Research output: Contribution to journalArticleResearchpeer-review

  101. Published
  102. Published
  103. Published

    Nanokristalline High-Entropy Legierungen

    Hohenwarter, A., Schuh, B., Völker, B., Pippan, R., Maier-Kiener, V., Clemens, H. & George, E. P., 2016.

    Research output: Contribution to conferencePresentationResearch