Harald Leitner

(Former)

151 - 200 out of 209Page size: 50

Research output

  1. 2007
  2. Published

    “Report on Thermodynamic Calculations - 2"

    Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  3. Published

    SANS Characterisation of nm-sized Precipitates in a Martensitic Fe-Co-Mo Alloy

    Eidenberger, E., Schober, M., Staron, P., Caliskanoglu, D., Leitner, H., Scheu, C. & Clemens, H., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Spin-misalignment scattering in a precipitation-hardened steel

    Eidenberger, E., Bischof, M., Staron, P., Leitner, H., Michels, A., Granitzer, P., Rumpf, K., Scheu, C. & Clemens, H., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  5. Published

    The Influence of Spin-misalignment Scattering on the SANS Data Evolution of Martensitic Age-hardening Steels

    Bischof, M., Staron, P., Michels, A., Granitzer, P., Rumpf, K., Leitner, H., Scheu, C. & Clemens, H., 2007, In: Acta materialia. 55, p. 2637-2646

    Research output: Contribution to journal › Article › Research › peer-review

  6. 2006
  7. Published

    An Experimental and Theoretical Study on the Precipitation Behaviour of a Complex Steel

    Leitner, H., Bischof, M., Clemens, H., Erlach, S. D., Sonderegger, B., Kozeschnik, E., Svoboda, J. & Fischer, F. D., 2006, In: Advanced engineering materials. 8, p. 1066-1077

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Atom-Probe Tomography Investigation of the Precipitation Behavior in a Nickel and Aluminium

    Akre, J., Danoix, F., Erlach, S. D., Leitner, H. & Auger, P., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 651-659

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Characterization and Simulation of Precipitation during Heat Treatment of the Hot-work Tool Steel X38 CrMoV 5-3

    Sonderegger, B., Kozeschnik, E., Bischof, M., Leitner, H., Clemens, H., Svoboda, J. & Fischer, F. D., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 553-540

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Characterization of Nanometer-sized Precipitates in Tool Steels

    Leitner, H. & Clemens, H., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 695-706

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Characterization of the Behavior under Impact Loading of a Maraging Steel Strengthened by nano-Precipitates

    Lach, E., Redjaimia, A., Leitner, H. & Clemens, H., 2006, Proceeding of the 8th International Conference on Mechanical and Physical Behaviour of Materials under Nynamic Loading. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Characterization of Wear and Surface Reaction Layer Formation on Aerospace Bearing Steel M50 and a Nitrogen-alloyed Stainless Steel

    Peißl, S. K., Leitner, H., Ebner, R., Hutter, H., Krecar, D. & Rabitsch, R., 2006, In: Journal of ASTM international. 3, p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Charakterisierung der auftretenden Phasen an C/C-Cu Verbindungen - Endbericht

    Scheu, C., Eidenberger, E., Leitner, H. & Clemens, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    Charakterisierung und Simulation der Ausscheidungsvorgänge in neuartigen Werkzeugstählen

    Leitner, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  15. Published

    Comparison of NiAl precipitation in a medium carbon secondary hardening steel and C-free PH13-8 maraging steel

    Erlach, S. D., Leitner, H., Bischof, M., Clemens, H., Danoix, F., Lemarchand, D. & Siller, I., 2006, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 429, p. 96-106

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Einfluss des Aluminiumgehaltes auf die Gefügeentwicklung eines niedriglegierten TRIP-Stahls

    Spenger, F., Traint, S., Leitner, H. & Clemens, H., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 215-222

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Einflussparameter auf die Zähigkeit von Maragingstählen

    Leitner, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Einfluss von Aluminiumnitrid auf die Hochtemperaturduktilität von stranggegossenen Brammen

    Winkelhofer, F., Parteder, E., Leitner, H., Clemens, H., Spiradek-Hahn, K. & Kozeschnik, E., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 281-288

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Gefügebewertung an einem martensitischen Werkstoff durch Transmissionselektronenmikroskopie (TEM) und Neutronenkleinwinkelstreuung (SANS)

    Sonnleitner, M., Klein, M., Spiradek-Hahn, K., Staron, P., Leitner, H. & Clemens, H., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 97-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Gefügecharakterisierung eines Warmarbeitsstahls mit martensitisch-bainitischem Mischgefüge

    Mayer, S., Pölzl, S., Hawranek, G., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 379-385

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Grain refinement in gamma-TiAl-based alloys by solid state phase transformations

    Clemens, H., Bartels, A., Bystrzanowski, S., Chladil, H., Leitner, H., Dehm, G., Gerling, R. & Schimansky, F.-P., 2006, In: Intermetallics. 14, p. 1380-1385

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Isothermal Aging Kinetics of NiAl Precipitates in a Secondary Hardening Steel

    Erlach, S. D., Siller, I., Leitner, H. & Clemens, H., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 725-732

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Metallographische Präparation von Wolfram und Wolframlegierungen zur Gefügeuntersuchung mittels licht- und rasterelektronenmikroskopischer Methoden

    Jedlicka, C., Pölzl, S., Hawranek, G., Leitner, H., Clemens, H., Stickler, R., Hoffmann, A. & Knabl, W., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 371-378

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Microstructure and Mechanical Properties of a C/C-Copper Joint Developed for Plasma Facing Components

    Eidenberger, E., Scheu, C., Hawranek, G., Pippan, R., Schedler, B., Leitner, H. & Clemens, H., 2006, In: Advanced engineering materials. 8, p. 1092-1096

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Mikrostruktur einer C/C-Cu Verbindung für Erste Wand Komponenten des Iter

    Eidenberger, E., Scheu, C., Hawranek, G., Pippan, R., Schedler, B., Leitner, H. & Clemens, H., 2006, Fortschritte in der Metallographie 38. Werkstoff-Informationsges., p. 525-530

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Mikrostrukturelle Untersuchungen an Böhler N710

    Leitner, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    Neutronenkleinwinkelstreuung an ausscheidungsgehärteten Stählen

    Eidenberger, E., Bischof, M., Staron, P., Erlach, S. D., Leitner, H., Scheu, C. & Clemens, H., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    On the Development of Grain Growth Resistant Tantalum Alloys

    Bischof, M., Mayer, S., Leitner, H., Clemens, H., Staron, P., Geiger, E., Voiticek, A. & Knabl, W., 2006, In: International journal of refractory metals & hard materials. 24, p. 437-444

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Phasenreaktionen in hochcarbidhaltigen Nickelbasislegierungen

    Jönzen, M., Ebner, R., Leitner, H. & Caliskanoglu, D., 2006, In: HTM - journal of heat treatment and materials . 61, p. 121-127

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Phase Transformations in High Niobium and Carbon Containing g-TiAl Based Alloys

    Chladil, H., Clemens, H., Leitner, H., Bartels, A., Gerling, R., Schimansky, F. P. & Kremmer, S., 2006, In: Intermetallics. 14, p. 1194-1198

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Short-time heat treatment of high-speed steels

    Leitner, H., Caliskanoglu, D., Vrtacnik, K. & Clemens, H., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 119-126

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Werkstoffcharakterisierung mittel dreidimensionaler Atomsonde

    Leitner, H. & Clemens, H., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 199-204

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Werkzeugstähle mit höchster Härte und Zähigkeit

    Zuber, M. & Leitner, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. 2005
  35. Published

    An advanced approach to the characterization of precipitates in tool steels

    Bischof, M. A., Erlach, S. D., Staron, P., Leitner, H. & Clemens, H., 2005, Proc. Solid-Solid Phase Transformations in Inorganic Materials. TMS, p. 8-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Analysis of the Precipitation Behaviour in a High Speed Steel with Small Angle Neutron Scattering

    Leitner, H., Staron, P., Clemens, H., Marsoner, S. & Warbichler, P., 2005, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 398, p. 323-331

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Ausscheidungsverhalten von Maragingstählen

    Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  38. Published

    „Charakterisierung und Simulation der Ausscheidungsvorgänge in neuartigen Werkzeugstählen“ - Jahresbericht

    Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  39. Published

    Charakterisierung von hochniobhältigen Titanaluminid Legierungen

    Chladil, H., Clemens, H. & Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  40. Published

    Combining complementary techniques to study precipitates in steels

    Bischof, M. A., Erlach, S., Staron, P., Leitner, H., Scheu, C. & Clemens, H., 2005, In: Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. 96, p. 1074-1080

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Experimental Studies and Thermodynamic Simulation of Phase Transformations in g-TiAl Based Alloys

    Chladil, H., Clemens, H., Leitner, H., Bartels, A., Gerling, R., Marketz, W. & Kozeschnik, E., 2005, Intergrative and Interdisciplinary Aspects of Intermetallics. Materials Research Society : MRS, p. S5.47.1-S5.47.6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Experimental Studies of Phase Transformations in a Carbon Containing Ti-45Al-7.5Nb Alloy and Related Thermodynamic Simulations

    Chladil, H., Clemens, H., Leitner, H., Bartels, A., Gerling, R. & Marketz, W. T., 2005, In: Advanced engineering materials. 7, p. 1131-1134

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Gefügeuntersuchungen an Kupferkabeln

    Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Massive Transformation in High Niobium Containing TiAl Alloys

    Bartels, A., Bystrzanowski, S., Chladil, H., Leitner, H., Clemens, H., Gerling, R. & Schimansky, F.-P., 2005, Intergrative and Interdisciplinary Aspects of Intermetallics. Materials Research Society : MRS, p. S5.48.1-S5.48.6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Microstructural evolution of a rapidly solidified high-speed steel during high temperature annealing

    Stotter, C., Leitner, H., Ebner, R., Ramminger, P. & Brandstätter, E., 2005, Microstructural evolution of a rapidly solidified high-speed steel during high temperature annealing. p. 53-61

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Microstructure and Mechanical Properties of Si and Y Doped Tantalum

    Bischof, M. A., Mayer, S., Leitner, H., Clemens, H., Pranzas, K., Staron, P., Dehm, G., Knabl, W., Voiticek, A. & Geiger, E., 2005, 16th International Plansee Seminar, (G. Kneringer, P. Rödhammer, H. Wildner, eds.). Plansee AG, p. 489-503

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Mikrostrukturelle Charakterisierung von Stabelektroden für Entstaubungsanlagen

    Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    On Restricting Aspects in the Production of Nonmagnetic Cr-Mn-N-Alloyed Steels

    Saller, G., Bernauer, J., Leitner, H. & Clemens, H., 2005, In: Steel research international. 76, p. 769-774

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Performance of nano-structured multilayer PVD coating TiAlN/VN in dry high speed milling of aerospace aluminium 7010-T7651

    Luo, Q., Robinson, G., Pittman, M., Howarth, M., Sim, W.-M., Stalley, M. R., Leitner, H., Ebner, R., Caliskanoglu, Z. D. & Hovsepian, P. E., 2005, In: Surface & coatings technology. 200, p. 123-127

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Phasenanalyse von magnetischen Werkstoffen

    Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Phasenumwandlung von Kunststoffformenstählen - Untersuchungsbericht

    Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. Published

    „Plasmagestützte Umwandlung der Martensitschicht“ - Technofit-Projektbericht

    Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  53. Published

    PVD-Hochtemperaturbeschichtung von neuartigen Schnellarbeitsstählen

    Mitterer, C. & Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1 2 3 4 5 Next
View graph of relations

Latest Research Output

View more (209)