Harald Leitner

(Former)

101 - 150 out of 209Page size: 50

Research output

  1. 2009
  2. Published

    Microstructure and mechanical properties of the superalloy ATI Allvac 718PlusTM

    Zickler, G., Schnitzer, R., Radis, R., Hochfellner, R., Schweins, R., Stockinger, M. & Leitner, H., 2009, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. p. 295-303

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Microstructure Evolution during Aging of two different Stainless Maraging Steels

    Schober, M., Schnitzer, R. & Leitner, H., 2009, Proceedings of the 17th IFHTSE Congress. p. 478-481

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Mikrostrukturelle Charakterisierung von PH 13-8 Mo Maraging-Stählen

    Schnitzer, R., Hochfellner, R., Nöhrer, M., Schober, M., Clemens, H., Zinner, S. & Leitner, H., 2009, In: Practical metallography = Praktische Metallographie. p. 521-536

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    On the Recrystallization Behavior of Technically Pure Molybdenum

    Primig, S., Leitner, H., Rodriguez Chavez, A., Clemens, H., Lorich, A., Knabl, W. & Stickler, R., 2009, proc. in 17 th Plansee Seminar. p. 15/1-15/9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Precipitation evolution in a Ti-free and Ti-containing stainless maraging steel

    Schober, M., Schnitzer, R. & Leitner, H., 2009, In: Ultramicroscopy. p. 553-562

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Reverted Austenite and its Transformation Behaviour during Deformation in a PH 13-8 Mo Maraging Steel

    Schnitzer, R., Zickler, G., Hochfellner, R., Nöhrer, M., Zinner, S. & Leitner, H., 2009, Proceedings of the 17th IFHTSE Congress. p. 462-465

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Sensitivity and Quantitativity in Atom Probe Tomography

    Danoix, F., Bostel, A., Leitner, H., Jessner, P., Sauvage, X., Gouné, M. & Danoix, R., 2009, In: Microscopy and microanalysis. p. 258-259

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Short-term creep behavior of a Cr Mo V hot-work tool steel

    Wurmbauer, H., Leitner, H., Panzenböck, M., Scheu, C. & Clemens, H., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 1066-1073

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Small scale materials testing for large scale application

    Stergar, E., Vieh, C., Hosemann, P., Leitner, H. & Maloy, S. A., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  11. Published

    Structure-Properties relationship of a PH 13-8 MO Maraging Steel

    Schnitzer, R., Zickler, G., Zinner, S. & Leitner, H., 2009, Proceedings of the 8th International Tooling Conference. p. 491-503

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Struktur - Eigenschaftsbeziehungen von Maraging-Stählen

    Schnitzer, R., Zinner, S. & Leitner, H., 2009, Forum für Metallurgie und Werktstofftechnik. p. 42-44

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    The morphology of secondary-hardening carbides in a martensitic steel at the peak hardness by 3DFIM

    Akre, J., Danoix, F., Leitner, H. & Auger, P., 2009, In: Ultramicroscopy. 109, p. 518-523

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Thermal stability of high-speed steels as characterized by X-ray diffraction profile analysis

    Leitner, H. & Clemens, H., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 1109-1113

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Thermisches Ätzen zur Bestimmung der Austenitkorngröße in sehr kohlenstoffarmen Stählen

    Pöhl, C., Gamsjäger, E., Leitner, H. & Clemens, H., 2009, In: Practical metallography = Praktische Metallographie. 46, p. 9-23

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Transformation of reverted austenite in a maraging steel under external loading: an in-situ X-ray diffraction study using high-energy synchrotron radiation

    Zickler, G., Schnitzer, R., Hochfellner, R., Lippmann, T., Zinner, S. & Leitner, H., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 1566-1573

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Untersuchungen zur Eigenspannungs- und Verzugsentstehung von induktiv gefügten artfremden Verbunden

    Höggerl, K., Leitner, H. & Ebner, R., 2009, In: HTM - journal of heat treatment and materials . 5, p. 278-284

    Research output: Contribution to journal › Article › Research › peer-review

  18. 2008
  19. Published

    Characterization of δ-phase in superalloy Allvac 718Plus™

    Stotter, C., Sommitsch, C., Wagner, J., Leitner, H., Letofsky-Papst, I., Zickler, G. A., Prantl, W. & Stockinger, M., Apr 2008, In: Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques. 99, 4, p. 376-380 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Characterization of delta-phase in superalloy Allvac 718Plus TM

    Stotter, C., Sommitsch, C., Wagner, J., Leitner, H., Letofsky-Papst, I., Zickler, G., Prantl, W. & Stockinger, M., 2008, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 99, p. 376-380

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Combination of complementary methods for precipitate analysis

    Stergar, E., Eidenberger, E., Staron, P. & Leitner, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  22. Published

    Computational Analysis of the Precipitation Kinetics in a Complex Tool Steel

    Sonderegger, B., Kozeschnik, E., Leitner, H., Clemens, H., Svoboda, J. & Fischer, F. D., 2008, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 99, p. 410-415

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Influence of aluminium nitride on the high-temperature ductility of continuous cast slabs

    Winkelhofer, F., Parteder, E., Clemens, H., Leitner, H., Spiradek-Hahn, K. & Kozeschnik, E., 2008, In: Practical metallography = Praktische Metallographie. 45, p. 159-172

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    In-situ high-temperature characterisation of intermetallic precipitates in a new nickel-based superalloy

    Zickler, G., Schnitzer, R., Schweins, R. & Leitner, H., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    In-situ high-temperature characterization of intermetallic precipitates in a new nickel-based superalloy

    Zickler, G., Schnitzer, R., Schweins, R. & Leitner, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    In-situ High-Temperature SAXS Studies of the Precipitation Kinetics in a Fe-Co-Mo Alloy

    Zickler, G., Eidenberger, E., Stergar, E., Leitner, H., Clemens, H., Lippmann, T., Staron, P., Fischer, T., Schreyer, A. & Novak, R., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    In-situ small-angle X-ray scattering study of the precipitation behavior in a Fe-25 at.%Co-9 at.%Mo alloy

    Zickler, G., Eidenberger, E., Leitner, H., Stergar, E., Clemens, H., Staron, P., Lippmann, T. & Schreyer, A., 2008, In: Materials characterization. 59, p. 1809-1813

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Isothermal aging kinetics of NiAl precipitates in a secondary hardening steel

    Erlach, S., Siller, I., Leitner, H. & Clemens, H., 2008, In: International journal of microstructure and materials properties (IJMMP). 3, p. 373-382

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Kurzzeitkriechverhalten eines Warmarbeitsstahls

    Wurmbauer, H., Scheu, C., Panzenböck, M., Stergar, E., Leitner, H., Clemens, H. & Caliskanoglu, Z. D., 2008, Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung. p. 251-256

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Micro Mechanic Testing and Local Electrode Atom Probe Micrscope (LEAP) Measurements on Oxide Dispersed Strengthened (ODS) Alloys

    Hosemann, P., Stergar, E., Vieh, C., Greco, R. R., Leitner, H. & Maloy, S. A., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. Published

    Microstructure and Mechanical Properties of a Hot-work Tool Steel

    Mayer, S., Scheu, C., Leitner, H., Siller, I. & Clemens, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Observation of the precipitation behaviour of Fe-25Co-15Mo by SANS and 3DAP

    Eidenberger, E., Stergar, E., Staron, P., Leitner, H. & Clemens, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    On the overaging behaviour of tool steel X38CrMoV5-3

    Bischof, M., Staron, P., Caliskanoglu, Z. D., Leitner, H., Scheu, C. & Clemens, H., 2008, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 472, p. 148-152

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Precipitates in a Fe-Co-Mo alloy characterized by complementary methods

    Eidenberger, E., Stergar, E., Leitner, H., Scheu, C., Staron, P. & Clemens, H., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 247-252

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Precipitation behaviour of an Fe-Co-Mo-alloy during non-isothermal ageing

    Leitner, H., Schober, M., Clemens, H., Caliskanoglu, D. & Danoix, F., 2008, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 99, p. 367-374

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Transformation of reverted austenite in a maraging steel under external loading: an in-situ X-Ray diffraction study using high-energy synchrotron radiation

    Zickler, G., Schnitzer, R., Hochfellner, R., Lippmann, T., Zinner, S. & Leitner, H., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Zum Kurzzeitkriechverhalten von Warmarbeitsstählen

    Stergar, E., Panzenböck, M., Leitner, H., Wurmbauer, H., Scheu, C. & Clemens, H., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. p. 342-346

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    δ-phase characterization of superalloy Allvac 718 Plus™

    Sommitsch, C., Stotter, C., Leitner, H., Mitsche, S., Letofsky-Papst, I. & Stockinger, M., 2008, TMS2008 - 137th Annual Meeting and Exhibition Supplemental Proceedings: Materials Processing and Properties. p. 63-68 6 p. (TMS Annual Meeting; vol. 2).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    δ-Phase characterization of superalloy allvac 718 PlusTM

    Sommitsch, C., Stotter, C., Leitner, H., Mitsche, S., Letofsky-Papst, I. & Stockinger, M., 2008, TMS 2008. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. 2007
  41. Published

    „DSC Setaram Evo 2400“

    Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    „Ferritgehaltbestimmung“

    Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Gefügecharakterisierung eines Warmarbeitsstahls mit martensitisch-bainitschem Mischgefüge

    Mayer, S., Pölzl, S., Hawranek, G., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2007, In: Practical metallography = Praktische Metallographie. p. 182-192

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Influence of the Cooling Rate on the Mechanical Properties of a Hot-work Tool Steel

    Mayer, S., Scheu, C., Leitner, H., Clemens, H. & Siller, I., 2007, In: Berg- und hüttenmännische Monatshefte : BHM. 152, p. 132-136

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Kerbschlagbiegeversuche an einem Kettenwerkstoff

    Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    Kriechen von Warmarbeitsstählen

    Stergar, E., Panzenböck, M. & Leitner, H., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Mikrostruktur einer C/C-CU Verbindung für Erste-Wand-Komponenten des ITER

    Eidenberger, E., Scheu, C., Hawranek, G., Leitner, H., Clemens, H., Pippan, R. & Schedler, B., 2007, In: Practical metallography = Praktische Metallographie. 44, p. 403-412

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    On the evolution of secondary hardening carbides in a high-speed steel characterised by APFIM and SANS

    Leitner, H., Clemens, H., Johann, A., Frederik, D. & Staron, P., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. p. 1093-1103

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Optimierung des Aufkohlprozesses von Schneeketten

    Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    PM mit HM-ähnlichen Eigenschaften bzw. Werkzeugstähle mit höchster Festigkeit und Zähigkeit

    Zuber, M. & Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Precipitation reactions during the early stages of aging in a Ni and Al alloyed martensitic medium carbon steel

    Erlach, S. D., Danoix, F., Leitner, H., Auger, P., Siller, I. & Clemens, H., 2007, In: Surface and interface analysis. 39, p. 213-220

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Prüfbericht Dilatometer

    Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  53. Published

    “Report on Thermodynamic Calculations”

    Leitner, H., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1 2 3 4 5 Next
View graph of relations

Latest Research Output

View more (209)