Gerald Pilz

1 - 50 out of 155Page size: 50

Research output

  1. 2023
  2. Published

    Development and characterisation of vitrimer-like elastomers and elastomeric composites from HXNBR rubber

    Grabmayer, T., Kaiser, S., Pilz, G., Kern, W. & Schlögl, S., 2023.

    Research output: Contribution to conference › Poster › Research

  3. Published

    From Single- to Multi-point – The Variable Properties of Polymers

    Pilz, G., 2023.

    Research output: Contribution to conference › Poster › Education › peer-review

  4. 2022
  5. Published

    Temperature scanning stress relaxation (TSSR): a characterization opportunity for elastomeric crosslinked networks

    Azevedo, M., Monks, A. M., Kerschbaumer, R. C. & Pilz, G., 15 Sept 2022.

    Research output: Contribution to conference › Poster › Research

  6. 2021
  7. Published

    Assessment of the stepped isothermal method for accelerated creep testing of high-density polyethylene

    Pilz, G., Wurzer, S., Morak, M. & Pinter, G., 2021, In: Mechanics of time-dependent materials.

    Research output: Contribution to journal › Article › Research › peer-review

  8. 2020
  9. Published

    The crucial role of external force in the estimation of the topology freezing transition temperature of vitrimers by elongational creep measurements

    Kaiser, S., Novak, P., Giebler, M., Gschwandl, M., Novak, P., Pilz, G., Morak, M. & Schlögl, S., 9 Sept 2020, In: Polymer. 204, 122804.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Experimental method for creep characterization of polymeric foam materials in media immersion

    Pilz, G., Guttmann, P., Oesterreicher, F. & Pinter, G. G., 30 Jul 2020, In: Mechanics of time-dependent materials. 24.2020, December, p. 421-433 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Influence of curing degree on the mechanical performance of polymer matrix composites

    Wolfahrt, M., Pilz, G. & Lang, R., 2020, ECCM 2018 - 18th European Conference on Composite Materials. 6 p. (ECCM 2018 - 18th European Conference on Composite Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. 2019
  13. Published

    NOVEL APPROACHES FOR LIFETIME PREDICTION OF COMPOSITE MATERIALS FOR STRUCTURAL APPLICATIONS UNDER STATIC LOADS

    Pilz, G., Gloggnitzer, S., Schneider, C. & Pinter, G. G., Sept 2019.

    Research output: Contribution to conference › Paper › peer-review

  14. E-pub ahead of print

    Stress relaxation and thermally adaptable properties in vitrimer-like elastomers from HXNBR rubber with covalent bonds

    Kaiser, S., Wurzer, S., Pilz, G., Kern, W. & Schlögl, S., 8 Jul 2019, (E-pub ahead of print) In: Soft Matter. 15.2019, 30, p. 6062-6072 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Stepped Isothermal Method And Stress Rate Accelerated Creep Rupture Tests For Efficient Creep Investigaton Of Engineering Thermoplastics

    Pilz, G., Guttmann, P., Gloggnitzer, S. & Pinter, G. G., Mar 2019.

    Research output: Contribution to conference › Paper › peer-review

  16. Published

    Minimum invasive production-related SLS specimen manufacturing for interface characterization of hybrid materials made by RTM

    Hergan, P., Lechner, C., Fauster, E., Pilz, G. & Schledjewski, R., 15 Jan 2019, In: International Journal of Advanced Manufacturing Technology. 102.2019, 5-8, p. 1963-1972 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Novel approach for the lifetime prediction of composite materials under static loads

    Gloggnitzer, S., Pilz, G., Schneider, C. & Pinter, G., 1 Jan 2019, 22nd Symposium on Composites. Hausmann, J. M. (ed.). Trans Tech Publications, p. 620-624 5 p. (Key Engineering Materials; vol. 809 KEM).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Mechanical Characterization of High Performance Thermal Decoupling Units for Building Envelops

    Pilz, G., Gloggnitzer, S. & Schneider, C., 2019.

    Research output: Contribution to conference › Poster › Research

  19. Published

    MECHANICAL CHARACTERIZATION OF HIGH PERFORMANCE THERMAL DECOUPLING UNITS IN BUILDING ENVELOPS

    Pilz, G., Gloggnitzer, S., Schneider, C., Pinter, G. G. & Röper, F., 2019.

    Research output: Contribution to conference › Paper › peer-review

  20. Published

    SRCR - Mit zeiteffizienter Prüfung zur statischen Langzeitabsicherung: Effizientes Prüfkonzept für statisch langzeitbeanspruchte Faserverbundkomponenten im Baubereich

    Pilz, G., 2019, In: Carbon-Composites-Magazin : die Mitgliederzeitschrift des CCeV.

    Research output: Contribution to journal › Article › Research

  21. 2018
  22. Published

    Experimental method for creep characterization of polymeric foam materials in media immersion

    Pilz, G., Guttmann, P., Oesterreicher, F. & Pinter, G. G., 2018.

    Research output: Contribution to conference › Abstract › peer-review

  23. 2017
  24. Published

    Fibre-reinforced polyamides and the influence of water absorption on the mechanical and thermomechanical behaviour

    Guttmann, P. & Pilz, G., 2017, Deformation and Fracture Behaviour of Polymer Materials. Springer Berlin, Vol. 247. p. 377-388 12 p. (Springer Series in Materials Science; vol. 247).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  25. 2016
  26. Published

    Dynamic Mechanical Profile of Polyketone Compared to Conventional Technical Plastics

    Pilz, G. & Guttmann, P., 31 Oct 2016, AIP Conference Proceedings: Proceedings of the Regional Conference Graz 2015 – Polymer Processing Society PPS. Vol. 1779. p. 070008-1–070008-5 6 p. 070008-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Concepts for service lifetime prediction of composite materials at different environmental conditions

    Gloggnitzer, S. & Pilz, G., 11 Sept 2016.

    Research output: Contribution to conference › Abstract

  28. Published

    25. Leobener Kunststoff Kolloquium "Kunststoffgerechte Bauteilentwicklung - vom Werkstoff zum Produkt"

    Pinter, G., Pilz, G. & Payer, M., 2016, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  29. 2015
  30. Published

    Characterization of the aging behaviour of various polyamide materials - part II

    Pilz, G. & Pinter, G., 30 Oct 2015

    Research output: Book/Report › Other report › Transfer

  31. Published

    aliphatic Polyketones - Mechanical and Thermo-Mechanical Behaviour in Wet Environments

    Guttmann, P. & Pilz, G., 9 Sept 2015. 17 p.

    Research output: Contribution to conference › Presentation › Research

  32. Published

    Dynamic Mechanical Profile of Polyketone Compared to Conventional Technical Plastics

    Pilz, G. & Guttmann, P., 2015, Polymer Processing Society Graz 2015, Book of Abstracts. p. 110 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Dynamic Mechanical Profile of Polyketone Compared to Conventional Technical Plastics

    Pilz, G., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  34. Published

    Efficient test methodology for mechanical characterization of structural polymers under media influence

    Pilz, G., 2015, Proceedings of Danube Vltava Sava Polymer Meeting - DVSPM 2015. p. 78 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Efficient test methodology for mechanical characterization of structural polymers under media influence

    Pilz, G., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  36. Published

    Einfluss der Herstellungsparameter auf die mechanischen Eigenschaften von endlosfaserverstärkten Polyurethanharzlaminaten

    Gloggnitzer, S. & Pilz, G., 2015.

    Research output: Contribution to conference › Poster › Research

  37. Published

    Einfluss des Aushärtegrades auf wesentliche Werkstoffeigenschaften von Epoxidharz-Faserverbundwerkstoffen

    Wolfahrt, M. & Pilz, G., 2015.

    Research output: Contribution to conference › Presentation › Transfer

  38. Published

    Mechanical and thermo-mechanical behaviour of aliphatic polyketones in wet environments

    Guttmann, P. & Pilz, G., 2015, European Corrosion Congress, EUROCORR 2015. ASMET, p. 1420 1 p. (European Corrosion Congress, EUROCORR 2015; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Thermoforming of polymer laminate films: Thermo-viscoelastic characterization

    Truszkiewicz, E., Tscharnuter, D., Pilz, G. & Pinter, G., 2015, Mechanics of Solids, Structures and Fluids. American Society of Mechanical Engineers(ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 9-2015).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. 2014
  41. Published

    Application Relevant Polymer Testing - Impact of Media on the Viscoelastic Behaviour of Engineering Polymers

    Guttmann, P., Pilz, G. & Oelzant, D., 2014, EUROCORR 2014 - Book of Abstracts. p. 527-527

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Einfluss der Herstellungsparameter auf die mechanischen Eigenschaften von endlosfaserverstärkten Polyurethanharzlaminaten

    Gloggnitzer, S. & Pilz, G., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Einfluss der Herstellungsparameter auf die mechanischen Eigenschaften von endlosfaserverstärkten Polyurethanharzlaminaten

    Gloggnitzer, S. & Pilz, G., 2014, 23. Leobener Kunststoff-Kolloquium: Hocheffizeinte Verbundwerkstoffe. p. 175-179

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Faserverstärkte Polyamide und der Einfluss der Wasseraufnahme auf deren mechanisches und thermo-mechanisches Verhalten

    Guttmann, P., Röper, F. & Pilz, G., 2014, Tagungsband Polymertec 2014. p. 372-377

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Influence of the manufacturing parameters on mechanical properties of polyurethane based composites

    Gloggnitzer, S. & Pilz, G., 2014, Proceedings ECCM16.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Thermomechanische Charakterisierung von Grünfolien

    Pilz, G. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. 2013
  48. Published

    Methodenabstimmung für DSC-Untersuchungen von PET-Tennissaiten

    Pilz, G. & Guttmann, P., 4 Nov 2013

    Research output: Book/Report › Other report › Transfer › peer-review

  49. Published

    Fatigue properties of polyurethane based high performance composites

    Gloggnitzer, S., Pilz, G. & Buchsteiner, T., 2013, ICSAAM 2013 Proceedings. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    THE IMPACT OF TIME, TEMPERATURE AND MEDIA ON POLYMER SELECTION FOR HIGH DEMAND APPLICATIONS

    Guttmann, P., Röper, F. & Pilz, G., 2013, The Proceedings of the Austrian – Slovenian Polymer Meeting 2013. p. 60-63

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Thermomechanische Eigenschaften von Hochleistungs-Faserverbundwerkstoffen auf Polyurethanharzbasis

    Gloggnitzer, S., Pilz, G. & Buchsteiner, T., 2013, Tagungsband Verbundwerkstoffe. p. 84-92

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. 2012
  53. Published

    Consideration of viscoelastic properties of polymers for materials selection

    Guttmann, P., Pilz, G. & Röper, F., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  54. Published

    Hochleistungs-Faserverbundwerkstoffen auf Polyurethanharzbasis

    Gloggnitzer, S., Pilz, G. & Buchsteiner, T., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  55. Published

    Polymer selection and testing methodology for high demand applications under environmental conditions

    Guttmann, P., Röper, F. & Pilz, G., 2012, Polymeric Materials. p. 58-59

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Thermische Werkstoff-Charakterisierung von Spritzguss-Filterteilen aus PA6

    Pilz, G. & Pinter, G., 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  57. 2011
  58. Published

    Bewitterungsuntersuchungen an PMMA-Linsen

    Pilz, G. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  59. Published

    Dynamisch-mechanische Analyse an Tennissaiten

    Pilz, G. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  60. Published

    Mechanische Eigenschaften Nanopartikel-verstärkter Epoxidharze

    Pilz, G. & Stadelmann, S., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 181-185

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Optimierte RTM-Struktur-Bauteile für automotive Anwendungen

    Pilz, G., Loike, S. & Lammer, H., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 175-197

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. 2010
  63. Published

    Zugversuche an verklebten Aluminiumblechen

    Pilz, G. & Pinter, G., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  64. 2009
  65. Published

    Dynamisch-Mechanische Analyse (DMA) an PMMA-Folien

    Pilz, G. & Lang, R., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1 2 3 4 Next
View graph of relations

Contact

Phone: 2109

Latest Research Output

View more (155)