Gerald Berger-Weber

(Former)

101 - 135 out of 135Page size: 50

Research output

  1. 2012
  2. Published

    Influence of dynamic mold temperature processes on the weld line strength of bi-directional filled tensile bars. A new multi-functional test injection mold to examine surface defects, thin-wall parts and frozen layer formation.

    Berger, G., Pacher, G. & Friesenbichler, W., 2012, Abstract Book - The 28th International Conference of Polymer Processing Society (PPS-28). p. 215-215

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Oberflächenenergie-Bestimmung bei realen Prozesstemperaturen in der Kunststoffverarbeitung

    Berger, G., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  4. Published

    Больше блеска, меньше стыков (More gloss, less welding lines)

    Berger, G., Roock, S., Steinbichler, G., Gießauf, J., Gruber, D. P. & Friesenbichler, W., 2012, In: Plastiks. 113, 7, p. 26-29

    Research output: Contribution to journal › Article › Research › peer-review

  5. 2011
  6. Published

    Improving the polymer surface quality by infrared radtiation driven dynamic mold temperature control

    Berger, G., Roock, S., Gruber, D. P., Friesenbichler, W. & Steinbichler, G., 2011,

    PPS 27: Program & Abstracts

    .     p. 199-199

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Influence of steel-, polymer grade and surface roughness on wetting

    Lugger, M., Schmied, F., Berger, G., Teichert, C. & Friesenbichler, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  8. Published

    Leichtbaupotentiale in der E-Mobility: Kunststofftechnische Herausforderungen beim Batteriegehäuse

    Kienzl, W., Berger, G. & Friesenbichler, W., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 131-142

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Mehr Glanz, weniger Bindenähte

    Berger, G., Steinbichler, G. & Roock, S., 2011, In: Kunststoffe. p. 35-38

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    More Gloss, less weld lines

    Berger, G., Steinbichler, G. & Roock, S., 2011, In: Kunststoffe <München> / Kunststoffe international. p. 26-29

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Novel approach to the measurement of the visual perceptibility of sink marks on injection molding parts

    Gruber, D. P., Berger, G., Pacher, G. & Friesenbichler, W., 2011, In: Polymer Testing. p. 651-656

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Replication of Stochastic and Geometric Micro Structures. Aspects of Visual Appearance

    Berger, G., Gruber, D. P., Friesenbichler, W., Teichert, C. & Burgsteiner, M., 2011, In: International polymer processing. XXVI, p. 313-322

    Research output: Contribution to journal › Article › Research › peer-review

  13. 2010
  14. Published

    Hochglanzoberflächen beim Spritzgießen - Quantitative topografische Beurteilung der Formenstahl- und Kunststoffoberfläche

    Berger, G., Friesenbichler, W., Reitter, M., Jutz, S. & Langecker, G., 2010, In: MP materials testing : Materialprüfung . 52, p. 211-221

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Hochglanzoberflächen beim Spritzgießen. Quantitive topografische Beurteilung der Formenstahl- und Kunststoffoberfläche

    Berger, G., Friesenbichler, W., Reitter, M., Jutz, S. & Langecker, G., 2010, In: MP materials testing : Materialprüfung . 52, p. 211-221

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Overview of influences on demolding forces in injection molding

    Berger, G. & Friesenbichler, W., 2010, 4th International PMI Conference - Conference Proceedings. p. 197-206

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. 2009
  18. Published

    Demolding Forces and Coefficients of Friction in Injection Molding. A new Mold and first results

    Berger, G., Friesenbichler, W., Schöfer, G. & Freudenschuß, G., 2009, In: Purasuchikkusu-eji = Plastics age. 55, p. 87-94

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Demolding forces and coefficients of friction in injection molding. A new practical measurement apparatus

    Berger, G. & Friesenbichler, W., 2009, Proceedings of ANTEC 2009. p. 1699-1703

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Influence of cavity pressure and injection rate on the surface roughness of PP, PC, ABS and ABS-PC

    Pacher, G., Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  21. Published

    Influence of cavity pressure and injection rate on the surface roughness of PP, PC, ABS and ABS-PC

    Pacher, G., Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  22. Published

    Influence on Demolding in Injection Moulding

    Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    Influence on Demolding in Injection Moulding

    Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Influences of steel grade and surface roughness on demolding forces in injection molding

    Berger, G., Friesenbichler, W. & Perko, J., 2009, Proceedings TOOL09. p. 25-37

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Influences of Surface Roughness and Polypropylene Grade on Demolding Forces and Coefficients of Friction

    Berger, G., Friesenbichler, W., Burgsteiner, M. & Lorenz, B., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  26. Published

    Influences of Surface Roughness and Polypropylene Grade on Demolding Forces and Coefficients of Friction

    Berger, G., Friesenbichler, W. & Burgsteiner, M., 2009

    Research output: Non-textual form › Web publication/site › Research

  27. Published

    Replication of a draw-polished cavity surface into PP and PC. Influence of flow length, wall thickness and injection molding parameters

    Burgsteiner, M., Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  28. Published

    Replication of a draw-polished cavity surface into PP and PC. Influence of flow length, wall thickness and injection molding parameters

    Burgsteiner, M., Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Structure Replication in Injection Moulding

    Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Structure Replication in Injection Moulding

    Berger, G. & Friesenbichler, W., 2009.

    Research output: Contribution to conference › Poster › Research › peer-review

  31. 2008
  32. Published

    A new practical measurement for demolding forces and coefficients of friction in injection molding

    Berger, G., Friesenbichler, W., Schöfer, G. & Freudenschuß, G., 2008, Proceeding of the PPS-24. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. 2007
  34. Published

    3D-Oberflächenvermessung von strukturierten Aluminiumfolien

    Berger, G. & Lang, R., 2007

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    Abrasive/corresive wear on plastic mold steels, measured under practical processing conditions

    Friesenbichler, W., Berger, G. & Perko, J., 2007, PPS-23 Program and Book of Abstracts. p. 176-176

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Abrasive/corresive wear on plastic mold steels, measured under practical processing conditions: PPS-23 The Polymer Processing Society 23rd Annual Meeting

    Friesenbichler, W., Berger, G. & Perko, J., 2007

    Research output: Non-textual form › Web publication/site › Research

  37. Published

    Charakterisierung von Spritzgieß-Formteiloberflächen

    Berger, G., Friesenbichler, W. & Gruber, D. P., 2007, In: KC-aktuell (Informationen aus dem Kunstoff-Cluster). p. 2-3

    Research output: Contribution to journal › Article › Research › peer-review

  38. 2006
  39. Published

    A new practical testing apparatus to evaluate corrision on plastic mold steel

    Friesenbichler, W., Berger, G., Langecker, G., Caliskanoglu, D., Hiebeler, B. J. & Perko, J., 2006, Tooling materials and their applications from research to market. p. 291-298

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Hochglanzoberflächen von Spritzgussteilen, Herstellung und Charakterisierung

    Friesenbichler, W., Langecker, G., Berger, G., Reitter, M. & Jutz, S., 2006, 19. Leobener Kunststoff Kolloqium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Praxisnahe Prüfmethoden für die Messung des abrasiven und korrosiven Verschleißes

    Friesenbichler, W., Berger, G. & Perko, J., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Untersuchungen zur Abformung geometrischer und stochastischer Strukturen an Spritzgießformteilen

    Berger, G., 2006

    Research output: Thesis › Doctoral Thesis

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (135)