Gerald Berger-Weber

(Former)

51 - 100 out of 135Page size: 50

Research output

  1. 2015
  2. Published

    Virtual Modelling of the Rubber Injection Molding Process including Verification in Industrial Scale Experiments

    Fasching, M., Friesenbichler, W. & Berger, G., Jun 2015, Proceedings of the IRC and DKT 2015; ME E T ING POINT OF THE RUB B E R INDUS T R Y.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Advanced manufacturing system for flexible production in plastics injection moulding

    Berger, G. & Kusic, D., 12 May 2015, p. 14.

    Research output: Contribution to conference › Presentation › Research › peer-review

  4. Published

    Advanced manufacturing system for flexible production in plastics injection moulding

    Berger, G. & Kusic, D., May 2015, Book of Abstracts - DVSPM 2015. p. 14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Industrie 4.0 – von der systematischen Bauteilentwicklung über die integrative Simulationskette bis zum störungsfreien Produktionsprozess

    Berger, G., 15 Apr 2015.

    Research output: Contribution to conference › Presentation › Research

  6. Published

    Advanced Mold Concepts to Improve Part Quality and Productivity in Rubber Injection Molding

    Fasching, M., Friesenbichler, W., Pacher, G. & Berger, G., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 49 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Change of Processing Behavior of Rubbers in Injection Molding caused by Material Storage

    Fasching, M., Friesenbichler, W. & Berger, G., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 103 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Determination of a robust process for a union nut. Why doptimal DoE did not solve random impact behavior?

    Steffel, C., Berger, G. & Friesenbichler, W., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 52 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Determination of a robust process for a union nut. Why doptimal DoE did not solve random impact behavior?

    Steffel, C., Berger, G. & Friesenbichler, W., 2015, p. 52. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  10. Published

    Influence of Rapid Heat Cycle Molding and Filler Type on Part Warpage of PP-based compounds

    Pacher, G., Berger, G., Gruber, D. & Friesenbichler, W., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 50 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Inline Detection of Material Storage Effects on Processing Behavior of Rubber Compounds

    Fasching, M., Berger, G. & Friesenbichler, W., 2015, Proceedings of the ANTEC 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    On the Use of Interfacial Tension Parameter to Predict Reduction of Friction by Mold Coatings in Injection Molding of Polyamide 6

    Berger, G., Steffel, C. & Friesenbichler, W., 2015, p. 51. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  13. Published

    On the Use of Interfacial Tension Parameter to Predict Reduction of Friction by Mold Coatings in Injection Molding of Polyamide 6

    Berger, G., Steffel, C. & Friesenbichler, W., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 51 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Robust process control for rubber injection moulding with use of systematic simulations and improved material data

    Fasching, M., Berger, G., Friesenbichler, W., Filz, P. & Helbich, B., 2015, In: International Polymer Science and Technology. 42, 3, p. T1-T3

    Research output: Contribution to journal › Article › Research › peer-review

  15. 2014
  16. Published

    Robuste Prozessführung beim Kautschukspritzgießen unter Nutzung systematischer Simulation und verbesserter Materialdaten

    Fasching, M., Berger, G., Friesenbichler, W., Filz, P. & Helbich, B., Oct 2014, In: GAK : Gummi, Fasern, Kunststoffe. 10/2014, p. 640-644 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Einsatz der Simulation in der systematischen Bauteilentwicklung

    Berger, G. & Friesenbichler, W., 27 Feb 2014, p. 1-38. 38 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  18. Published

    A Novel Sink Mark Model for High Gloss Injection Molded Parts - Correlation of Deflectometric and Topographic Measurements

    Macher, J., Gruber, D. P., Altenbuchner, T., Pacher, G., Berger, G. & Friesenbichler, W., 2014, In: Polymer Testing. 39, p. 12-19

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Detection of Visually Perceptible Sink Marks on High Gloss Injection Molded Parts by Phase Measuring Deflectometry

    Macher, J., Gruber, D. P., Altenbuchner, T., Pacher, G., Berger, G. & Friesenbichler, W., 2014, In: Polymer Testing. p. 42-48

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Determination of a Robust Process Setting for an Injection Molded Mirror Drive Component Using D-Optimal DoE

    Berger, G., Friesenbichler, W., Luger, H.-J., Gierth, M., Beytollahi, I. & Filz, P., 2014, 30th International Conference of the Polymer Processing Scociety: DIGITAL BOOK OF ABSTRACTS AND CONFERENCE PAPERS. p. 10-390

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Evaluation of Rubber Injection Molding Simulation by Correlation of Simulated Curing Degree to Measureable Part Properties

    Fasching, M., Friesenbichler, W. & Berger, G., 2014, 30th International Conference of the Polymer Processing Scociety: DIGITAL BOOK OF ABSTRACTS AND CONFERENCE PAPERS. p. 11-349

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Hochqualitative Bauteiloberflächen im Spritzguss – Möglichkeiten und Grenzen der Prozessführung

    Friesenbichler, W. & Berger, G., 2014, Tagungsband: Spritzgießen & Veredeln; Produktion funktioneller, hochwertiger Oberflächen. Deutschland: Carl Hanser Verlag GmbH & Co. KG

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Influence of mold surface temperature on polymer part warpage in rapid heat cycle molding

    Berger, G. R., Pacher, G. A., Pichler, A., Friesenbichler, W. & Gruber, D. P., 2014, Proceedings of PPS 2013 - 29th International Conference of the Polymer Processing Society, Conference Papers. Vol. 1593. p. 189-194 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Influence of Thermal Conductivity of PP-Based Compounds on Surface Roughness of Rapid Heat Cycle Injection Molded Parts

    Pacher, G., Geissler, B., Macher, J., Berger, G., Gruber, D. P. & Friesenbichler, W., 2014, 30th International Conference of the Polymer Processing Scociety: DIGITAL BOOK OF ABSTRACTS AND CONFERENCE PAPERS. p. 10-136

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    In-mold sensor concept to calculate process-specific rheological properties

    Pacher, G. A., Berger, G. R., Friesenbichler, W., Gruber, D. P. & Macher, J., 2014, In: AIP Conference Proceedings. 1593, p. 179-182

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Measurement of the visual perceptibility of sink marks on injection molding parts by a new fast processing model

    Gruber, D. P., Macher, J., Haba, D., Berger, G., Pacher, G. & Friesenbichler, W., 2014, In: Polymer Testing. 33, p. 7-12

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Prediction of friction in injection molding by wetting parameters?

    Berger, G., Friesenbichler, W., Steffel, C. & Pacher, G., 2014, 6th International PMI Conference Proceedings. p. 61-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Rapid Heat Cycle Molding, Surface Topography and Visual Appearance of Injection Molded Parts. Research Work in Leoben in the Last 10 Years.

    Berger, G., Friesenbichler, W., Gruber, D. P., Pacher, G. & Macher, J., 2014, ANTEC® 2014 - Proceedings of the Technical Conference & Exhibition. Brown, H. L. & Jones, D. H. (eds.). p. 1700-1705

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Sink mark shape dependin on holdin pressure and rapid heat c clemoldin -mathematical approimation and KE parameters

    Pacher, G. A., Gruber, D. P., Rescher, M., Berger, G. R. & Friesenbichler, W., 2014, 72nd Annual Technical Conference of the Society of Plastics Engineers, ANTEC 2014: The Plastics Conference. January ed. Vol. 2. p. 1716-1720 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. 2013
  31. Published

    A novel method for the characterization of surface defects remarkably close to the human perception

    Gruber, D. P., Pacher, G., Macher, J., Berger, G. & Friesenbichler, W., 2013, 29th International Conference of the Polymer Processing Society. p. 48-48

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    AN OVERVIEW ON RESEARCH WORK IN LEOBEN IN THE FIELDS OF RAPID HEAT CYCLE MOLDING, SURFACE TOPOGRAPHY AND VISUAL APPEARANCE OF INJECTION MOLDED PARTS

    Pacher, G., Berger, G., Gruber, D. P. & Friesenbichler, W., 2013, ADVANCES IN PLASTICS TECHNOLOGY - Conference Papers. p. Paper No. 27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Application of deflectometry for surface inspection of high-­‐glossy injection-­‐molded facing parts

    Macher, J., Gruber, D. P., Berger, G. & Friesenbichler, W., 2013, THE PROCEEDINGS OF THE AUSTRIAN – SLOVENIAN POLYMER MEETING 2013: ASPM 2013. Ljubljana, p. 93-95

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Application of D-­optimal design of experiments on process optimization of an automotive part

    Berger, G., Luger, H.-J., Friesenbichler, W., Beytollahi, I., Gierth, M. & Filz, P., 2013, THE PROCEEDINGS OF THE AUSTRIAN – SLOVENIAN POLYMER MEETING 2013. p. 106-108

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Deformation Analysis of an Automotive Part by Injection Molding Simulation: Influence of Material Data and Mold Modeling on Prediction Quality

    Luger, H.-J., Berger, G., Müller, F., Friesenbichler, W., Beytollahi, I. & Filz, P., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. Published

    Deformation Analysis of an Automotive Part by Injection Molding Simulation: Influence of Material Data and Mold Modelling on Prediction Quality

    Luger, H.-J., Berger, G., Müller, F., Friesenbichler, W., Beytollahi, I. & Filz, P., 2013, 29th International Conference of the Polymer Processing Society. p. 59-59

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Die Wirkung dynamischer Werkzeugtemperierung auf die Oberflächenqualität von Kunststoffteilen

    Pacher, G., Berger, G., Friesenbichler, W. & Gruber, D. P., 2013, 22. Leobener Kunststoff-Kolloquium: Oberlfächen und Grenzflächen in der Polymertechnologie. p. 101-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Influence of material condition on processing of rubber compounds and its representation in simulation

    Fasching, M., Friesenbichler, W. & Berger, G., 2013, THE PROCEEDINGS OF THE AUSTRIAN – SLOVENIAN POLYMER MEETING 2013. p. 75-77

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Influence of Mold Surface Temperature on Polymer Part Warpage in Rapid Heat Cycle Molding

    Berger, G., Pacher, G., Gruber, D. P., Pichler, A. & Friesenbichler, W., 2013, 29th International Conference of the Polymer Processing Society. p. 49-49

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    INFLUENCE OF PROCESS SETTINGS ON THE TOPOGRAPHY OF SINK MARKS

    Pacher, G., Berger, G., Gruber, D. P. & Friesenbichler, W., 2013, ADVANCES IN PLASTICS TECHNOLOGY - Conference Papers. Gliwice, Polen, p. Paper No. 31

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    In-Mold Sensor Concept to calculate process-specific Rheological Properties

    Pacher, G., Berger, G., Friesenbichler, W., Gruber, D. P. & Macher, J., 2013, 29th International Conference of the Polymer Processing Society. p. 48-48

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    More Gloss, Fewer Weld Lines With Variothermal Molding

    Berger, G., Roock, S., Steinbichler, G., Gießauf, J., Gruber, D. P. & Friesenbichler, W., 2013, In: Plastics technology. 59, 3, p. 30, 60-35, 62

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    MULTI-FUNCTIONAL INJECTION MOLD FOR EXAMINING THE INFLUENCE OF RAPID HEAT CYCLE MOLDING ON POLYMER MORPHOLOGY

    Pacher, G., Berger, G. & Friesenbichler, W., 2013, Tagungsband der 3. Tagung Innovation Messtechnik. p. 25-30

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    NEW METHODS FOR QUALITY CONTROL OF INJECTION-MOLDED PARTS

    Macher, J., Gruber, D. P., Berger, G. & Friesenbichler, W., 2013, ANTEC 2013 Conference and Tradeshow. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    New ways for the characterization of appearance properties of plastic products and components close to human vision

    Gruber, D. P., Berger, G. & Friesenbichler, W., 2013, THE PROCEEDINGS OF THE AUSTRIAN – SLOVENIAN POLYMER MEETING 2013. Ljubljana, p. 11-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Reibwerte und Entformungskräfte im konventionellen Spritzguss. Vorhersage durch Grenzflächenspannung?

    Berger, G., Friesenbichler, W., Teichert, C., Langecker, G. & Lugger, M., 2013, 22. Leobener Kunststoff-Kolloquium: Oberlfächen und Grenzflächen in der Polymertechnologie. p. 75-89

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Systematic Virtual Optimization of the Rubber Injection Moulding Process Including Practical Verification

    Fasching, M., Berger, G., Friesenbichler, W. & Gierth, M., 2013, 29th International Conference of the Polymer Processing Society. p. 181-182

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Variotherm Injection Molding Process with BFMold Technology and Electric Heating: Simulation and Experimental Validation

    Pichler, A., Rus, P., Kukla, C., Berger, G., Müller, F., Lucyshyn, T., Pacher, G. & Friesenbichler, W., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    Virtual Mold Sampling for Robust Processes

    Hopmann, C., Grümer, B., Berger, G., Gierth, M. & Gröger, T., 2013, In: Kunststoffe <München> / Kunststoffe international. p. 132-134

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Virtuelle Musterung für robuste Prozesse

    Hopmann, C., Grümer, B., Berger, G., Neuss, A., Gierth, M. & Gröger, T., 2013, In: Kunststoffe. p. 198-201

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Wahrnehmungsnahe Messung des Sehens und Fühlens von Kunststoffoberflächen

    Gruber, D. P., Berger, G., Macher, J., Pacher, G. & Friesenbichler, W., 2013, 22. Leobener Kunststoff-Kolloquium: Oberlfächen und Grenzflächen in der Polymertechnologie. p. 138-149

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. 2012
  53. Published

    Functional Mold Coatings for Dynamic Mold Surface Temperature Control in Injection Molding. Simulation of Joule Heating of Thin Films and Development of a Test System.

    Pacher, G., Berger, G., Friesenbichler, W. & Weiß, H., 2012, Abstract Book - The 28th International Conference of Polymer Processing Society (PPS-28). p. 495-495

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Functional Mold Coatings for Dynamic Mold Surface Temperature Control in Injection Molding. Simulation of Joule Heating of Thin Films and Development of a Test System.

    Pacher, G., Berger, G., Friesenbichler, W. & Weiß, H., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (135)