Gerald Berger-Weber

(Former)

21 - 40 out of 135Page size: 20

Research output

  1. 2018
  2. Published

    Simulationsgestützter Vergleich von additiv gefertigten zu konventionellen hochwärmeleitfähigen Formeinsätzen für Spritzgießwerkzeuge

    Berger-Weber, G., Zorn, D., Panzl, G. & Bevc, F., 1 Mar 2018, 2 p. Linz

    Research output: Other contribution › Research

  3. Published

    Determination of the temperature of an industrial rubber compound after dosing. A new ultrasound based method

    Hutterer, T., Praher, B., Berger-Weber, G. & Friesenbichler, W., 2018.

    Research output: Contribution to conference › Paper › peer-review

  4. Published

    Online detection of storage-induced changes of rubber properties in the injection molding process

    Hutterer, T., Fasching, M. A., Berger-Weber, G. & Friesenbichler, W., 2018.

    Research output: Contribution to conference › Paper › peer-review

  5. 2017
  6. Published

    A study on cooling performance in injection molding. Heat conductive mold materials versus conformal cooling channels. Proceedings Europe Africa Conference 2017 of the POLYMER PROCESSING SOCIETY (PPS)

    Berger, G., Friesenbichler, W., Zorn, D. & Bevc, F., 22 Jun 2017

    Research output: Non-textual form › Digital or Visual Products › Research

  7. Published

    Kühlperformance beim Spritzgießen von Kunststoffen. Verleich einer konturnahen und einer blutgefäßartigen Werkzeugkühlung mit einem Formeinsatz höherer Wärmeleitfähigkeit

    Berger, G., Panzl, G., Zorn, D., Bevc, F. & Friesenbichler, W., Jun 2017, Rapid.Tech – International Trade Show & Conference for Additive Manufacturing : Proceedings of the 14th Rapid.Tech Conference Erfurt, Germany, 20 – 22 June 2017. Kynast, M., Eichmann, M. & Witt, G. (eds.). p. 123-139

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Auslegung konturnaher Kühlsysteme für Spritzgießwerkzeuge. Vergleich von SLM-gedruckten mit hochwärmeleitfähigen konventionellen Formeinsätzen

    Berger, G., Zorn, D., Panzl, G. & Bevc, F., 21 Apr 2017, p. 229-243. 15 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  9. Published

    Advanced Manufacturing ganzheitlich betrachtet – Von der Produktentwicklung zum Null-Fehler-Serienprozess

    Berger, G., 20 Apr 2017, p. 53-65. 13 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  10. Published

    Vorrichtung und Verfahren zum Faserspritzgießen von Spritzgussteilen

    Berger-Weber, G. (Inventor), Bevc, F. (Inventor), Bodor, C. (Inventor), Friesenbichler, W. (Inventor), Petschnig, A. (Inventor) & Schadler, W. (Inventor), 5 Apr 2017, IPC No. B29C45/00, B29K105/06, Patent No. EP3148765

    Research output: Patent

  11. Published

    26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik

    Friesenbichler, W. & Berger, G., Apr 2017, Leoben: Eigenverlag. 275 p.

    Research output: Book/Report › Anthology › Research

  12. Published

    Advanced Manufacturing ganzheitlich betrachtet – Von der Produktentwicklung zum Null-Fehler-Serienprozess

    Berger, G., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 53-65 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Auslegung konturnaher Kühlsysteme für Spritzgießwerkzeuge. Vergleich von SLM-gedruckten mit hochwärmeleitfähigen konventionellen Formeinsätzen

    Berger, G., Zorn, D., Panzl, G. & Bevc, F., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 229-243 15 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Herausforderungen und Grenzen des Kautschukspritzgießens

    Fasching, M., Friesenbichler, W. & Berger, G., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 129-136 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Neue anti-adhäsive Beschichtungen für Metalle

    Kaynak, B., Berger, G. & Kern, W., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 187-199 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Verbesserung der Wärmeleitfähigkeit von HDPE durch Einsatz mikro- und nanoskaliger Füllstoffe

    Stieger, S., Berger, G., Battisti, M. & Friesenbichler, W., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 247-248 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    A view on quality optimization in injection molding

    Berger-Weber, G., 2017

    Research output: Thesis › Habilitation thesis › peer-review

  18. 2016
  19. Published

    Bonding Forces in Fused Filament Fabrication

    Spörk, M., Schuschnigg, S., Holzer, C., Arbeiter, F. & Berger, G., 23 Sept 2016.

    Research output: Contribution to conference › Abstract › peer-review

  20. Published

    On the Use of Bionic Cooling Structures in Injection Molding

    Berger, G., Zorn, D., Bodor, C., Friesenbichler, W. & Bevc, F., 22 Sept 2016, p. 155-161. 7 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  21. Published

    On the Use of Bionic Cooling Structures in Injection Molding

    Berger, G., Zorn, D., Bodor, C., Friesenbichler, W. & Bevc, F., 22 Sept 2016, p. 155-161. 7 p.

    Research output: Contribution to conference › Paper › peer-review

  22. Published

    On the Use of Bionic Cooling Structures in Injection Molding

    Berger, G., Zorn, D., Bodor, C., Friesenbichler, W. & Bevc, F., 22 Sept 2016, Conference Proceedings: 7th bi-annual International Conference of Polymers & Moulds Innovations. Gent, p. 155-161 7 p. 21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Simulation of Rubber Injection Molding - Challenges and Limitations

    Friesenbichler, W., Berger, G. & Fasching, M., 22 Sept 2016, p. 179-183. 4 p.

    Research output: Contribution to conference › Paper › peer-review

Previous 1 2 3 4 5 6 7 Next
View graph of relations

Latest Research Output

View more (135)