Gerald Berger-Weber

(Former)

1 - 100 out of 135Page size: 100

Research output

  1. 2021
  2. Published

    The injection mold as a cyber physical system. Using simulation to train its artificial intelligence

    Berger-Weber, G. & Saeidi Aminabadi, S., 16 Sept 2021, Conference Proceedings 29th Leoben Kunststoffkolloquium: Smart Production - Sustainability and Polymers - Additive Manufacturing: . 2021 ed. Leoben, Vol. 29. 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Kautschukspritzgießen mit Qualitätserkennung: Automatische Prozessüberwachung mit iQ clamp control und maschinellem Lernen

    Hutterer, T., Berger-Weber, G., Kerschbaumer, R. C., Friesenbichler, W., Klutz, A., Leng, T. & Mayr, K., 3 May 2021, In: Kunststoffe. 111.2021, 5, p. 18 - 21 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Rubber Injection Molding with Quality Recognition

    Hutterer, T., Berger-Weber, G., Roman Christopher, K., Friesenbichler, W., Klutz, A., Leng, T. & Mayr, K., Apr 2021, In: Kunststoffe <München> / Kunststoffe international. 2021, 4, p. 6 - 9 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Application of organosilane coatings for improved anti-adhesive properties enabling facilitated demolding in polymer processing

    Bandl, C., Krempl, N., Berger-Weber, G., Kern, W. & Friesenbichler, W., 10 Mar 2021, In: Journal of Applied Polymer Science. 138.2021, 30, 9 p., 50714.

    Research output: Contribution to journal › Article › Research › peer-review

  6. 2020
  7. Published

    Rubber injection molding: Applying multivariate statistics to identify quality issues solely from process signals

    Hutterer, T., Berger-Weber, G., Kerschbaumer, R. C. & Friesenbichler, W., 15 Dec 2020, In: Polymer Engineering and Science. 61.2021, 4, p. 983-992 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Das intelligente Spritzgießwerkzeug als cyber-physisches System

    Berger-Weber, G. & Gruber, D. P., May 2020, In: KC-aktuell (Informationen aus dem Kunstoff-Cluster). 1 p.

    Research output: Contribution to journal › Short survey

  9. Published

    Viscoelastic Modelling of Polymer Melts and Rubber Compounds

    Friesenbichler, W., Stieger, S., Kerschbaumer, R. C., Berger-Weber, G., Neunhäuserer, A. & Mitsoulis, E., 2020, Advances in Polymer Processing 2020 Christian Hopmann Rainer Dahlmann Eds. Proceedings of the International Symposium on Plastics Technology. Springer Vieweg, p. 270-282 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. 2019
  11. Published

    Contraction and Capillary Flow of a Carbon Black Filled Rubber Compound

    Stieger, S., Kerschbaumer, R. C., Mitsoulis, E., Fasching, M., Berger-Weber, G., Friesenbichler, W. & Sunder, J., 23 Oct 2019, In: Polymer engineering and science. 60.2020, 1, p. 32-43 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. E-pub ahead of print

    Comparison of steady-state and transient thermal conductivity testing methods using different industrial rubber compounds

    Kerschbaumer, R. C., Stieger, S., Gschwandl, M., Hutterer, T., Fasching, M., Lechner, B., Meinhart, L., Hildenbrandt, J., Schrittesser, B., Fuchs, P. F., Berger-Weber, G. & Friesenbichler, W., 26 Sept 2019, (E-pub ahead of print) In: Polymer Testing. 80.2019, December, p. 1-8 8 p., 106121.

    Research output: Contribution to journal › Article › Research

  13. Published

    A trouble‐free first layer adhesion for polypropylene‐based materials in material extrusion‐based additive manufacturing

    Spörk, M., Gonzalez-Gutierrez, J., Lichal, C., Cajner, H., Berger-Weber, G., Schuschnigg, S., Cardon, L. & Holzer, C., 31 May 2019, p. 327. 1 p.

    Research output: Contribution to conference › Abstract

  14. Published

    Flow Visualization of Rubber Compounds in Molding

    Stieger, S., Kerschbaumer, R. C., Mitsoulis, E., Fasching, M., Berger-Weber, G. & Friesenbichler, W., 14 May 2019, Conference book ERIF 2019. p. 42-57

    Research output: Chapter in Book/Report/Conference proceeding › Other chapter contribution › Research

  15. Published

    Viskoelastische Charakterisierung, Modellierung und Strömungssimulation hochgefüllter Kautschukmischungen

    Stieger, S., Roman Christopher, K., Berger-Weber, G. & Friesenbichler, W., 25 Apr 2019, 28. Leobener Kunststoff-Kolloquium: Simulation in der Kunststofftechnik. Leoben: Eigenverlag, Vol. 09. p. 78-88 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Efficient cooling of hot spots in injection molding. A biomimetic cooling channel versus a heat‐conductive mold material and a heat conductive plastics

    Berger-Weber, G., Zorn, D., Friesenbichler, W., Bevc, F. & Bodor, C. J., 9 Mar 2019, In: Polymer engineering and science. 59.2019, s2, p. E180-E188 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Simulative and experimental investigation of rapid heat cycle molding for rubbers

    Hutterer, T., Berger-Weber, G., Mager, C., Fasching, M. A., Pacher, G. A. & Friesenbichler, W., 22 Jan 2019, AIP Conference Proceedings. Vol. 2055. p. 080003-1 - 080003-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Fault detection in rubber injection molding with multivariate statistics

    Hutterer, T., Berger-Weber, G. & Friesenbichler, W., 2019, In: Rubber world. 2019, December, p. 40-44 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. 2018
  20. Published

    Viscoelastic Material Characterization and Modelling of Industrial Rubber Compounds - K-BKZ Model

    Stieger, S., Kerschbaumer, R. C., Haselmann, M., Berger-Weber, G., Fasching, M., Duretek, I., Schuschnigg, S. & Friesenbichler, W., 7 Nov 2018.

    Research output: Contribution to conference › Abstract › peer-review

  21. Published

    Determination of the temperature after dosing an industrial rubber compound. A new ultrasonic-based method

    Hutterer, T., Praher, B., Berger-Weber, G. & Friesenbichler, W., 5 Jul 2018. 1 p.

    Research output: Contribution to conference › Poster › Research

  22. Published

    A study on the Influence of Material Characterization Methods and Models on Rubber Injection Molding Simulation

    Stieger, S., Berger-Weber, G., Friesenbichler, W. & Fasching, M., 3 Jul 2018.

    Research output: Contribution to conference › Abstract › peer-review

  23. Published

    Optimisation of the Adhesion of Polypropylene-Based Materials during Extrusion-Based Additive Manufacturing

    Spörk, M., Gonzalez-Gutierrez, J., Lichal, C., Cajner, H., Berger, G., Schuschnigg, S., Cardon, L. & Holzer, C., 2 May 2018, In: Polymers. 10.2018, 5, 16 p., 490.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Beschichtungen für Formen und Werkzeuge in der Kunststoff verarbeitenden Industrie

    Krempl, N., Bandl, C., Gröger, T., Kern, W., Friesenbichler, W. & Berger-Weber, G., 20 Apr 2018. 1 p.

    Research output: Contribution to conference › Poster › Research

  25. Published

    Simulationsgestützter Vergleich von additiv gefertigten zu konventionellen hochwärmeleitfähigen Formeinsätzen für Spritzgießwerkzeuge

    Berger-Weber, G., Zorn, D., Panzl, G. & Bevc, F., 1 Mar 2018, 2 p. Linz

    Research output: Other contribution › Research

  26. Published

    Determination of the temperature of an industrial rubber compound after dosing. A new ultrasound based method

    Hutterer, T., Praher, B., Berger-Weber, G. & Friesenbichler, W., 2018.

    Research output: Contribution to conference › Paper › peer-review

  27. Published

    Online detection of storage-induced changes of rubber properties in the injection molding process

    Hutterer, T., Fasching, M. A., Berger-Weber, G. & Friesenbichler, W., 2018.

    Research output: Contribution to conference › Paper › peer-review

  28. 2017
  29. Published

    A study on cooling performance in injection molding. Heat conductive mold materials versus conformal cooling channels. Proceedings Europe Africa Conference 2017 of the POLYMER PROCESSING SOCIETY (PPS)

    Berger, G., Friesenbichler, W., Zorn, D. & Bevc, F., 22 Jun 2017

    Research output: Non-textual form › Digital or Visual Products › Research

  30. Published

    Kühlperformance beim Spritzgießen von Kunststoffen. Verleich einer konturnahen und einer blutgefäßartigen Werkzeugkühlung mit einem Formeinsatz höherer Wärmeleitfähigkeit

    Berger, G., Panzl, G., Zorn, D., Bevc, F. & Friesenbichler, W., Jun 2017, Rapid.Tech – International Trade Show & Conference for Additive Manufacturing : Proceedings of the 14th Rapid.Tech Conference Erfurt, Germany, 20 – 22 June 2017. Kynast, M., Eichmann, M. & Witt, G. (eds.). p. 123-139

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Auslegung konturnaher Kühlsysteme für Spritzgießwerkzeuge. Vergleich von SLM-gedruckten mit hochwärmeleitfähigen konventionellen Formeinsätzen

    Berger, G., Zorn, D., Panzl, G. & Bevc, F., 21 Apr 2017, p. 229-243. 15 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  32. Published

    Advanced Manufacturing ganzheitlich betrachtet – Von der Produktentwicklung zum Null-Fehler-Serienprozess

    Berger, G., 20 Apr 2017, p. 53-65. 13 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  33. Published

    Vorrichtung und Verfahren zum Faserspritzgießen von Spritzgussteilen

    Berger-Weber, G. (Inventor), Bevc, F. (Inventor), Bodor, C. (Inventor), Friesenbichler, W. (Inventor), Petschnig, A. (Inventor) & Schadler, W. (Inventor), 5 Apr 2017, IPC No. B29C45/00, B29K105/06, Patent No. EP3148765

    Research output: Patent

  34. Published

    26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik

    Friesenbichler, W. & Berger, G., Apr 2017, Leoben: Eigenverlag. 275 p.

    Research output: Book/Report › Anthology › Research

  35. Published

    Advanced Manufacturing ganzheitlich betrachtet – Von der Produktentwicklung zum Null-Fehler-Serienprozess

    Berger, G., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 53-65 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Auslegung konturnaher Kühlsysteme für Spritzgießwerkzeuge. Vergleich von SLM-gedruckten mit hochwärmeleitfähigen konventionellen Formeinsätzen

    Berger, G., Zorn, D., Panzl, G. & Bevc, F., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 229-243 15 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Herausforderungen und Grenzen des Kautschukspritzgießens

    Fasching, M., Friesenbichler, W. & Berger, G., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 129-136 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Neue anti-adhäsive Beschichtungen für Metalle

    Kaynak, B., Berger, G. & Kern, W., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 187-199 13 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Verbesserung der Wärmeleitfähigkeit von HDPE durch Einsatz mikro- und nanoskaliger Füllstoffe

    Stieger, S., Berger, G., Battisti, M. & Friesenbichler, W., Apr 2017, 26. Leobener Kunststoff-Kolloquium 20. und 21. April 2017: Schriftenreihe Kunststofftechnik. Friesenbichler, W. & Berger, G. (eds.). Leoben, Vol. 7. p. 247-248 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    A view on quality optimization in injection molding

    Berger-Weber, G., 2017

    Research output: Thesis › Habilitation thesis › peer-review

  41. 2016
  42. Published

    Bonding Forces in Fused Filament Fabrication

    Spörk, M., Schuschnigg, S., Holzer, C., Arbeiter, F. & Berger, G., 23 Sept 2016.

    Research output: Contribution to conference › Abstract › peer-review

  43. Published

    On the Use of Bionic Cooling Structures in Injection Molding

    Berger, G., Zorn, D., Bodor, C., Friesenbichler, W. & Bevc, F., 22 Sept 2016, p. 155-161. 7 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  44. Published

    On the Use of Bionic Cooling Structures in Injection Molding

    Berger, G., Zorn, D., Bodor, C., Friesenbichler, W. & Bevc, F., 22 Sept 2016, p. 155-161. 7 p.

    Research output: Contribution to conference › Paper › peer-review

  45. Published

    On the Use of Bionic Cooling Structures in Injection Molding

    Berger, G., Zorn, D., Bodor, C., Friesenbichler, W. & Bevc, F., 22 Sept 2016, Conference Proceedings: 7th bi-annual International Conference of Polymers & Moulds Innovations. Gent, p. 155-161 7 p. 21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Simulation of Rubber Injection Molding - Challenges and Limitations

    Friesenbichler, W., Berger, G. & Fasching, M., 22 Sept 2016, p. 179-183. 4 p.

    Research output: Contribution to conference › Paper › peer-review

  47. Published

    Simulation of Rubber Injection Molding - Challenges and Limitations

    Friesenbichler, W., Berger, G. & Fasching, M., 22 Sept 2016, p. 179-183. 4 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  48. Published

    Simulation of Rubber Injection Molding - Challenges and Limitations

    Friesenbichler, W., Berger, G. & Fasching, M., 22 Sept 2016, Conference Proceedings: 7th bi-annual International Conference of Polymer & Moulds Innovations. Gent, p. 179-183 4 p. 34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    A New Device for Measuring Shear Viscosity of Rubbers on a Rubber Injection Molding Machine

    Fasching, M., Friesenbichler, W., Leitner, E. & Berger, G., Jul 2016, p. 1-5. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  50. Published

    Influence of Processing Conditions and Filler Type and on the Crystallinity of PLA Compounds

    Pacher, G., Hutterer, T., Berger, G. & Friesenbichler, W., Jul 2016, p. 1-5. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  51. Published

    A study on the role of wetting parameters on friction in injection moulding

    Berger, G. R., Steffel, C. & Friesenbichler, W., 2016, In: International Journal of Materials and Product Technology. 52, 1-2, p. 193-211 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Determination of a robust process for a union nut. Why d-optimal DoE did not solve random impact behavior?

    Steffel, C., Berger, G. & Friesenbichler, W., 2016, In: AIP Conference Proceedings. 1779

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Vorrichtung und Verfahren zum Faserspritzgießen von Spritzgießteilen

    Petschnig, A. (Inventor), Rojach, M. (Inventor), Friesenbichler, W. (Inventor), Bodor, C. (Inventor), Bevc, F. (Inventor), Berger, G. (Inventor) & Schadler, W. (Inventor), 2016, 3 Dec 2015, Priority No. WO2015181296A1

    Research output: Patent

  54. 2015
  55. Published

    DEVICE AND METHOD FOR FIBRE INJECTION MOULDING OF INJECTION MOULDED PARTS

    Berger-Weber, G. (Inventor), Bevc, F. (Inventor), Bodor, C. (Inventor), Friesenbichler, W. (Inventor), Petschnig, A. (Inventor) & Schadler, W. (Inventor), 3 Dec 2015, IPC No. B29C45/00, Patent No. WO2015181296

    Research output: Patent

  56. Published

    Vorrichtung und Verfahren zum Faserspritzgießen von Spritzgussteilen

    Petschnig, A. (Inventor), Friesenbichler, W. (Inventor), Bodor, C. (Inventor), Bevc, F. (Inventor), Berger-Weber, G. (Inventor) & Schadler, W. (Inventor), 3 Dec 2015, IPC No. B29C45/00, B29C45/33, Patent No. DE102014210296 A1

    Research output: Patent

  57. Published

    Reibungsreduktion bei der Entformung von PA 6. Vorhersage durch Grenzflächenspannung und Verifikation durch praxisnahe Reibwertmessungen

    Berger, G., 26 Nov 2015, p. 161-177.

    Research output: Contribution to conference › Presentation › Research › peer-review

  58. Published

    Virtual Modelling of the Rubber Injection Molding Process including Verification in Industrial Scale Experiments

    Fasching, M., Friesenbichler, W. & Berger, G., Jun 2015, Proceedings of the IRC and DKT 2015; ME E T ING POINT OF THE RUB B E R INDUS T R Y.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Advanced manufacturing system for flexible production in plastics injection moulding

    Berger, G. & Kusic, D., 12 May 2015, p. 14.

    Research output: Contribution to conference › Presentation › Research › peer-review

  60. Published

    Advanced manufacturing system for flexible production in plastics injection moulding

    Berger, G. & Kusic, D., May 2015, Book of Abstracts - DVSPM 2015. p. 14

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  61. Published

    Industrie 4.0 – von der systematischen Bauteilentwicklung über die integrative Simulationskette bis zum störungsfreien Produktionsprozess

    Berger, G., 15 Apr 2015.

    Research output: Contribution to conference › Presentation › Research

  62. Published

    Advanced Mold Concepts to Improve Part Quality and Productivity in Rubber Injection Molding

    Fasching, M., Friesenbichler, W., Pacher, G. & Berger, G., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 49 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Change of Processing Behavior of Rubbers in Injection Molding caused by Material Storage

    Fasching, M., Friesenbichler, W. & Berger, G., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 103 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Determination of a robust process for a union nut. Why doptimal DoE did not solve random impact behavior?

    Steffel, C., Berger, G. & Friesenbichler, W., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 52 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    Determination of a robust process for a union nut. Why doptimal DoE did not solve random impact behavior?

    Steffel, C., Berger, G. & Friesenbichler, W., 2015, p. 52. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  66. Published

    Influence of Rapid Heat Cycle Molding and Filler Type on Part Warpage of PP-based compounds

    Pacher, G., Berger, G., Gruber, D. & Friesenbichler, W., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 50 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Inline Detection of Material Storage Effects on Processing Behavior of Rubber Compounds

    Fasching, M., Berger, G. & Friesenbichler, W., 2015, Proceedings of the ANTEC 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    On the Use of Interfacial Tension Parameter to Predict Reduction of Friction by Mold Coatings in Injection Molding of Polyamide 6

    Berger, G., Steffel, C. & Friesenbichler, W., 2015, p. 51. 1 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  69. Published

    On the Use of Interfacial Tension Parameter to Predict Reduction of Friction by Mold Coatings in Injection Molding of Polyamide 6

    Berger, G., Steffel, C. & Friesenbichler, W., 2015, Polymer Processing Society Graz 2015 - Book of Abstract. p. 51 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Robust process control for rubber injection moulding with use of systematic simulations and improved material data

    Fasching, M., Berger, G., Friesenbichler, W., Filz, P. & Helbich, B., 2015, In: International Polymer Science and Technology. 42, 3, p. T1-T3

    Research output: Contribution to journal › Article › Research › peer-review

  71. 2014
  72. Published

    Robuste Prozessführung beim Kautschukspritzgießen unter Nutzung systematischer Simulation und verbesserter Materialdaten

    Fasching, M., Berger, G., Friesenbichler, W., Filz, P. & Helbich, B., Oct 2014, In: GAK : Gummi, Fasern, Kunststoffe. 10/2014, p. 640-644 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Einsatz der Simulation in der systematischen Bauteilentwicklung

    Berger, G. & Friesenbichler, W., 27 Feb 2014, p. 1-38. 38 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  74. Published

    A Novel Sink Mark Model for High Gloss Injection Molded Parts - Correlation of Deflectometric and Topographic Measurements

    Macher, J., Gruber, D. P., Altenbuchner, T., Pacher, G., Berger, G. & Friesenbichler, W., 2014, In: Polymer Testing. 39, p. 12-19

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Detection of Visually Perceptible Sink Marks on High Gloss Injection Molded Parts by Phase Measuring Deflectometry

    Macher, J., Gruber, D. P., Altenbuchner, T., Pacher, G., Berger, G. & Friesenbichler, W., 2014, In: Polymer Testing. p. 42-48

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Determination of a Robust Process Setting for an Injection Molded Mirror Drive Component Using D-Optimal DoE

    Berger, G., Friesenbichler, W., Luger, H.-J., Gierth, M., Beytollahi, I. & Filz, P., 2014, 30th International Conference of the Polymer Processing Scociety: DIGITAL BOOK OF ABSTRACTS AND CONFERENCE PAPERS. p. 10-390

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Evaluation of Rubber Injection Molding Simulation by Correlation of Simulated Curing Degree to Measureable Part Properties

    Fasching, M., Friesenbichler, W. & Berger, G., 2014, 30th International Conference of the Polymer Processing Scociety: DIGITAL BOOK OF ABSTRACTS AND CONFERENCE PAPERS. p. 11-349

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  78. Published

    Hochqualitative Bauteiloberflächen im Spritzguss – Möglichkeiten und Grenzen der Prozessführung

    Friesenbichler, W. & Berger, G., 2014, Tagungsband: Spritzgießen & Veredeln; Produktion funktioneller, hochwertiger Oberflächen. Deutschland: Carl Hanser Verlag GmbH & Co. KG

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    Influence of mold surface temperature on polymer part warpage in rapid heat cycle molding

    Berger, G. R., Pacher, G. A., Pichler, A., Friesenbichler, W. & Gruber, D. P., 2014, Proceedings of PPS 2013 - 29th International Conference of the Polymer Processing Society, Conference Papers. Vol. 1593. p. 189-194 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    Influence of Thermal Conductivity of PP-Based Compounds on Surface Roughness of Rapid Heat Cycle Injection Molded Parts

    Pacher, G., Geissler, B., Macher, J., Berger, G., Gruber, D. P. & Friesenbichler, W., 2014, 30th International Conference of the Polymer Processing Scociety: DIGITAL BOOK OF ABSTRACTS AND CONFERENCE PAPERS. p. 10-136

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    In-mold sensor concept to calculate process-specific rheological properties

    Pacher, G. A., Berger, G. R., Friesenbichler, W., Gruber, D. P. & Macher, J., 2014, In: AIP Conference Proceedings. 1593, p. 179-182

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Measurement of the visual perceptibility of sink marks on injection molding parts by a new fast processing model

    Gruber, D. P., Macher, J., Haba, D., Berger, G., Pacher, G. & Friesenbichler, W., 2014, In: Polymer Testing. 33, p. 7-12

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Prediction of friction in injection molding by wetting parameters?

    Berger, G., Friesenbichler, W., Steffel, C. & Pacher, G., 2014, 6th International PMI Conference Proceedings. p. 61-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Rapid Heat Cycle Molding, Surface Topography and Visual Appearance of Injection Molded Parts. Research Work in Leoben in the Last 10 Years.

    Berger, G., Friesenbichler, W., Gruber, D. P., Pacher, G. & Macher, J., 2014, ANTEC® 2014 - Proceedings of the Technical Conference & Exhibition. Brown, H. L. & Jones, D. H. (eds.). p. 1700-1705

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Sink mark shape dependin on holdin pressure and rapid heat c clemoldin -mathematical approimation and KE parameters

    Pacher, G. A., Gruber, D. P., Rescher, M., Berger, G. R. & Friesenbichler, W., 2014, 72nd Annual Technical Conference of the Society of Plastics Engineers, ANTEC 2014: The Plastics Conference. January ed. Vol. 2. p. 1716-1720 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. 2013
  87. Published

    A novel method for the characterization of surface defects remarkably close to the human perception

    Gruber, D. P., Pacher, G., Macher, J., Berger, G. & Friesenbichler, W., 2013, 29th International Conference of the Polymer Processing Society. p. 48-48

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    AN OVERVIEW ON RESEARCH WORK IN LEOBEN IN THE FIELDS OF RAPID HEAT CYCLE MOLDING, SURFACE TOPOGRAPHY AND VISUAL APPEARANCE OF INJECTION MOLDED PARTS

    Pacher, G., Berger, G., Gruber, D. P. & Friesenbichler, W., 2013, ADVANCES IN PLASTICS TECHNOLOGY - Conference Papers. p. Paper No. 27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Application of deflectometry for surface inspection of high-­‐glossy injection-­‐molded facing parts

    Macher, J., Gruber, D. P., Berger, G. & Friesenbichler, W., 2013, THE PROCEEDINGS OF THE AUSTRIAN – SLOVENIAN POLYMER MEETING 2013: ASPM 2013. Ljubljana, p. 93-95

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Application of D-­optimal design of experiments on process optimization of an automotive part

    Berger, G., Luger, H.-J., Friesenbichler, W., Beytollahi, I., Gierth, M. & Filz, P., 2013, THE PROCEEDINGS OF THE AUSTRIAN – SLOVENIAN POLYMER MEETING 2013. p. 106-108

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  91. Published

    Deformation Analysis of an Automotive Part by Injection Molding Simulation: Influence of Material Data and Mold Modeling on Prediction Quality

    Luger, H.-J., Berger, G., Müller, F., Friesenbichler, W., Beytollahi, I. & Filz, P., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  92. Published

    Deformation Analysis of an Automotive Part by Injection Molding Simulation: Influence of Material Data and Mold Modelling on Prediction Quality

    Luger, H.-J., Berger, G., Müller, F., Friesenbichler, W., Beytollahi, I. & Filz, P., 2013, 29th International Conference of the Polymer Processing Society. p. 59-59

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Die Wirkung dynamischer Werkzeugtemperierung auf die Oberflächenqualität von Kunststoffteilen

    Pacher, G., Berger, G., Friesenbichler, W. & Gruber, D. P., 2013, 22. Leobener Kunststoff-Kolloquium: Oberlfächen und Grenzflächen in der Polymertechnologie. p. 101-110

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Influence of material condition on processing of rubber compounds and its representation in simulation

    Fasching, M., Friesenbichler, W. & Berger, G., 2013, THE PROCEEDINGS OF THE AUSTRIAN – SLOVENIAN POLYMER MEETING 2013. p. 75-77

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Influence of Mold Surface Temperature on Polymer Part Warpage in Rapid Heat Cycle Molding

    Berger, G., Pacher, G., Gruber, D. P., Pichler, A. & Friesenbichler, W., 2013, 29th International Conference of the Polymer Processing Society. p. 49-49

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    INFLUENCE OF PROCESS SETTINGS ON THE TOPOGRAPHY OF SINK MARKS

    Pacher, G., Berger, G., Gruber, D. P. & Friesenbichler, W., 2013, ADVANCES IN PLASTICS TECHNOLOGY - Conference Papers. Gliwice, Polen, p. Paper No. 31

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    In-Mold Sensor Concept to calculate process-specific Rheological Properties

    Pacher, G., Berger, G., Friesenbichler, W., Gruber, D. P. & Macher, J., 2013, 29th International Conference of the Polymer Processing Society. p. 48-48

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    More Gloss, Fewer Weld Lines With Variothermal Molding

    Berger, G., Roock, S., Steinbichler, G., Gießauf, J., Gruber, D. P. & Friesenbichler, W., 2013, In: Plastics technology. 59, 3, p. 30, 60-35, 62

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    MULTI-FUNCTIONAL INJECTION MOLD FOR EXAMINING THE INFLUENCE OF RAPID HEAT CYCLE MOLDING ON POLYMER MORPHOLOGY

    Pacher, G., Berger, G. & Friesenbichler, W., 2013, Tagungsband der 3. Tagung Innovation Messtechnik. p. 25-30

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    NEW METHODS FOR QUALITY CONTROL OF INJECTION-MOLDED PARTS

    Macher, J., Gruber, D. P., Berger, G. & Friesenbichler, W., 2013, ANTEC 2013 Conference and Tradeshow. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    New ways for the characterization of appearance properties of plastic products and components close to human vision

    Gruber, D. P., Berger, G. & Friesenbichler, W., 2013, THE PROCEEDINGS OF THE AUSTRIAN – SLOVENIAN POLYMER MEETING 2013. Ljubljana, p. 11-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Reibwerte und Entformungskräfte im konventionellen Spritzguss. Vorhersage durch Grenzflächenspannung?

    Berger, G., Friesenbichler, W., Teichert, C., Langecker, G. & Lugger, M., 2013, 22. Leobener Kunststoff-Kolloquium: Oberlfächen und Grenzflächen in der Polymertechnologie. p. 75-89

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Systematic Virtual Optimization of the Rubber Injection Moulding Process Including Practical Verification

    Fasching, M., Berger, G., Friesenbichler, W. & Gierth, M., 2013, 29th International Conference of the Polymer Processing Society. p. 181-182

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    Variotherm Injection Molding Process with BFMold Technology and Electric Heating: Simulation and Experimental Validation

    Pichler, A., Rus, P., Kukla, C., Berger, G., Müller, F., Lucyshyn, T., Pacher, G. & Friesenbichler, W., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  105. Published

    Virtual Mold Sampling for Robust Processes

    Hopmann, C., Grümer, B., Berger, G., Gierth, M. & Gröger, T., 2013, In: Kunststoffe <München> / Kunststoffe international. p. 132-134

    Research output: Contribution to journal › Article › Research › peer-review

  106. Published

    Virtuelle Musterung für robuste Prozesse

    Hopmann, C., Grümer, B., Berger, G., Neuss, A., Gierth, M. & Gröger, T., 2013, In: Kunststoffe. p. 198-201

    Research output: Contribution to journal › Article › Research › peer-review

  107. Published

    Wahrnehmungsnahe Messung des Sehens und Fühlens von Kunststoffoberflächen

    Gruber, D. P., Berger, G., Macher, J., Pacher, G. & Friesenbichler, W., 2013, 22. Leobener Kunststoff-Kolloquium: Oberlfächen und Grenzflächen in der Polymertechnologie. p. 138-149

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  108. 2012
  109. Published

    Functional Mold Coatings for Dynamic Mold Surface Temperature Control in Injection Molding. Simulation of Joule Heating of Thin Films and Development of a Test System.

    Pacher, G., Berger, G., Friesenbichler, W. & Weiß, H., 2012, Abstract Book - The 28th International Conference of Polymer Processing Society (PPS-28). p. 495-495

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  110. Published

    Functional Mold Coatings for Dynamic Mold Surface Temperature Control in Injection Molding. Simulation of Joule Heating of Thin Films and Development of a Test System.

    Pacher, G., Berger, G., Friesenbichler, W. & Weiß, H., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1 2 Next
View graph of relations

Latest Research Output

View more (135)