Franz Kessler

1 - 201 out of 201Page size: 500

Research output

  1. 2018
  2. Accepted/In press

    Dust Emission at Bulk Material Handling: Simulation by DEM-CFD, Laboratory Model Tests and Industrial Implementation

    Grübler, C., Kessler, F., Prenner, M. & Zeiler, S., 10 Jul 2018, (Accepted/In press).

    Research output: Contribution to conference › Paper › peer-review

  3. 2017
  4. Published

    Analyses of Dust Emissions at Transfer Points: Comparison of Two-Way Coupled DEM-CFD Simulations and Industrial Implementations

    Grübler, C., Kessler, F., Prenner, M. & Zeiler, S., 4 Oct 2017.

    Research output: Contribution to conference › Paper › peer-review

  5. Published

    Technical Report - Finite Element Analysis - 3" Clamp Connector Rev. 1

    Hopp, S., Kessler, F., Prenner, M., Stojkovic, S., Pramstaller, M. & Fimbinger, E., May 2017, 104 p.

    Research output: Book/Report › Commissioned report › Research

  6. Published

    Technical Report - Finite Element Analysis - 3" Clamp Connector Rev. 2

    Hopp, S., Kessler, F., Prenner, M., Stojkovic, S., Pramstaller, M. & Fimbinger, E., May 2017, 100 p.

    Research output: Book/Report › Commissioned report › Research

  7. Published

    Technical Report - Finite Element Analysis - 10" BestLoc Rev. 1

    Hopp, S., Kessler, F., Prenner, M., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Apr 2017, 18 p.

    Research output: Book/Report › Commissioned report › Research

  8. Published

    Technical Report - Finite Element Analysis - 1" Clamp Connector Rev. 3

    Hopp, S., Kessler, F., Prenner, M., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Apr 2017, 104 p.

    Research output: Book/Report › Commissioned report › Research

  9. Accepted/In press

    Prevention of secondary dust emissions in ironmaking plants using dust suppressants: Midterm Report

    Grübler, C., Kessler, F., Prenner, M. & Suppan, M., 13 Mar 2017, (Accepted/In press)

    Research output: Book/Report › Commissioned report › Research

  10. Published

    Technical Report - Finite Element Analysis - 1" Clamp Connector Rev. 1

    Hopp, S., Kessler, F., Prenner, M., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Mar 2017, 109 p.

    Research output: Book/Report › Commissioned report › Research

  11. Published

    Technical Report - Finite Element Analysis - 43,5" Blind Flange Case 1 Rev. 0

    Hopp, S., Kessler, F., Prenner, M., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Mar 2017, 122 p.

    Research output: Book/Report › Commissioned report › Research

  12. Published

    Technical Report - Finite Element Analysis - 43,5" Blind Flange Case 1 Rev. 1

    Hopp, S., Kessler, F., Prenner, M., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Mar 2017, 158 p.

    Research output: Book/Report › Commissioned report › Research

  13. Published

    Technical Report - Finite Element Analysis - 43,5" Blind Flange Case 2 Rev. 0

    Hopp, S., Kessler, F., Prenner, M., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Mar 2017, 124 p.

    Research output: Book/Report › Commissioned report › Research

  14. Published

    Technical Report - Finite Element Analysis - 43,5" Blind Flange Case 2 Rev. 1

    Hopp, S., Kessler, F., Prenner, M., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Mar 2017, 165 p.

    Research output: Book/Report › Commissioned report › Research

  15. Published

    Technical Report - Finite Element Analysis - 43,5" Blind Flange Case 3

    Hopp, S., Kessler, F., Prenner, M., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Mar 2017, 56 p.

    Research output: Book/Report › Commissioned report › Research

  16. Published

    Technical Report - Finite Element Analysis - 1" Clamp Connector Rev. 0

    Hopp, S., Kessler, F., Prenner, M., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Feb 2017, 70 p.

    Research output: Book/Report › Commissioned report › Research

  17. Published

    Technical Report - Finite Element Analysis - 2" Clamp Connector Rev. 0

    Hopp, S., Kessler, F., Prenner, M., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Feb 2017, 70 p.

    Research output: Book/Report › Commissioned report › Research

  18. Published

    Technical Report - Finite Element Analysis - 3" Clamp Connector Rev. 0

    Hopp, S., Kessler, F., Prenner, M., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Feb 2017, 70 p.

    Research output: Book/Report › Commissioned report › Research

  19. Published

    Technical Report - Finite Element Analysis - Valve Body 20" CL600

    Hopp, S., Kessler, F., Stojkovic, S., Pramstaller, M., Fimbinger, E. & Prenner, M., Jan 2017, 32 p.

    Research output: Book/Report › Commissioned report › Research

  20. Published

    Technical Report - Finite Element Analysis - Valve Body 20" CL900

    Hopp, S., Kessler, F., Prenner, M., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Jan 2017, 28 p.

    Research output: Book/Report › Commissioned report › Research

  21. Published

    Technical Report - Finite Element Analysis - Valve Body 24" CL600

    Hopp, S., Kessler, F., Prenner, M., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Jan 2017, 28 p.

    Research output: Book/Report › Commissioned report › Research

  22. Published

    Technical Report - Finite Element Analysis - Valve Body 24" CL900

    Hopp, S., Kessler, F., Prenner, M., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Jan 2017, 28 p.

    Research output: Book/Report › Commissioned report › Research

  23. 2016
  24. Published

    Analyses of Dust Emission in Bulk Material Handling Apparatuses by DEM-CFD: Basics, Approaches & Prospects

    Grübler, C., Kessler, F. & Prenner, M., 2 Dec 2016.

    Research output: Contribution to conference › Paper › peer-review

  25. Published

    Technical Report - Finite Element Analysis - 1 1/2" Blind Flange 10000 psi

    Hopp, S., Kessler, F., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Nov 2016, 101 p.

    Research output: Book/Report › Commissioned report › Research

  26. Published

    Technical Report - Finite Element Analysis - 12" Blind Flange 10000 psi

    Hopp, S., Kessler, F., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Nov 2016, 101 p.

    Research output: Book/Report › Commissioned report › Research

  27. Published

    Technical Report - Finite Element Analysis - 1" Blind Flange 10000 psi - Rev. 0

    Hopp, S., Kessler, F., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Nov 2016, 101 p.

    Research output: Book/Report › Commissioned report › Research

  28. Published

    Technical Report - Finite Element Analysis - 1" Blind Flange 10000 psi - Rev. 1

    Hopp, S., Kessler, F., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Nov 2016, 101 p.

    Research output: Book/Report › Commissioned report › Research

  29. Published

    Technical Report - Finite Element Analysis - 2" Blind Flange 10000 psi

    Hopp, S., Kessler, F., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Nov 2016, 101 p.

    Research output: Book/Report › Commissioned report › Research

  30. Published

    Technical Report - Finite Element Analysis - 3" Blind Flange 10000 psi

    Hopp, S., Kessler, F., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Nov 2016, 101 p.

    Research output: Book/Report › Commissioned report › Research

  31. Published

    Technical Report - Finite Element Analysis - 3" Compact Flange 10000 psi

    Hopp, S., Kessler, F., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Nov 2016, 85 p.

    Research output: Book/Report › Commissioned report › Research

  32. Published

    Technical Report - Finite Element Analysis - 8" Blind Flange 10000 psi

    Hopp, S., Kessler, F., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Nov 2016, 99 p.

    Research output: Book/Report › Commissioned report › Research

  33. Published

    Sekundärstaubentstehung beim Schüttguthandling - Grundlagen, Simulationsansätze (DEM-CFD) und Ausblick

    Grübler, C., Kessler, F. & Prenner, M., 12 Oct 2016.

    Research output: Contribution to conference › Paper

  34. Published

    Technical Report - Finite Element Analysis - 12" Clamp Connector - Rev. 2

    Hopp, S., Kessler, F., Stojkovic, S. & Pramstaller, M., Oct 2016, 309 p.

    Research output: Book/Report › Commissioned report › Research

  35. Published

    Technical Report - Finite Element Analysis - 12" Clamp Connector - Rev. 1

    Hopp, S., Kessler, F., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Sept 2016, 1019 p.

    Research output: Book/Report › Commissioned report › Research

  36. Published

    Technical Report - Finite Element Analysis - 12" Norsok Compact Flange 10000 psi

    Hopp, S., Kessler, F., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Sept 2016, 88 p.

    Research output: Book/Report › Commissioned report › Research

  37. Published

    Technical Report - Finite Element Analysis - 1 1/2" Norsok Compact Flange 10000 psi

    Hopp, S., Kessler, F., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Aug 2016, 85 p.

    Research output: Book/Report › Commissioned report › Research

  38. Published

    Technical Report - Finite Element Analysis - 1" Norsok Compact Flange 10000 psi

    Hopp, S., Kessler, F., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Aug 2016, 85 p.

    Research output: Book/Report › Commissioned report › Research

  39. Published

    Technical Report - Finite Element Analysis - 12" Norsok Compact Flange 7500 psi

    Hopp, S., Kessler, F., Grübler, C., Stojkovic, S. & Pramstaller, M., Jul 2016, 84 p.

    Research output: Book/Report › Commissioned report › Research

  40. Published

    Technical Report - Finite Element Analysis - 8" Norsok Compact Flange 7500 psi

    Hopp, S., Kessler, F., Stojkovic, S., Pramstaller, M. & Grübler, C., Jul 2016, 84 p.

    Research output: Book/Report › Commissioned report › Research

  41. Published

    Technical Report - Finite Element Analysis - 3" Norsok Compact Flange 7500 psi

    Hopp, S., Kessler, F., Stojkovic, S. & Pramstaller, M., Jun 2016, 84 p.

    Research output: Book/Report › Commissioned report › Research

  42. Published

    Technical Report - Finite Element Analysis - 6" Norsok Compact Flange 7500 psi

    Hopp, S., Kessler, F., Stojkovic, S. & Pramstaller, M., Jun 2016, 83 p.

    Research output: Book/Report › Commissioned report › Research

  43. Published

    Technical Report - Finite Element Analysis - 12" Clamp Connector (Bending Moment Evaluation)

    Hopp, S., Kessler, F., Stojkovic, S. & Pramstaller, M., May 2016, 100 p.

    Research output: Book/Report › Commissioned report › Research

  44. Published

    Technical Report - Finite Element Analysis - 12" Clamp Connector - Model max. tolerance

    Hopp, S., Kessler, F., Stojkovic, S., Pramstaller, M. & Hossain, S., May 2016, 344 p.

    Research output: Book/Report › Commissioned report › Research

  45. Published

    Technical Report - Finite Element Analysis - 12" Clamp Connector - Model min. tolerance

    Hopp, S., Kessler, F., Stojkovic, S., Pramstaller, M. & Hossain, S., May 2016, 663 p.

    Research output: Book/Report › Commissioned report › Research

  46. Published

    Technical Report - Finite Element Analysis - 2" Norsok Compact Flange 7500 psi

    Hopp, S., Kessler, F., Stojkovic, S. & Pramstaller, M., May 2016, 84 p.

    Research output: Book/Report › Commissioned report › Research

  47. Published

    Technical Report - Finite Element Analysis - 1" Clamp Connector Rev. 2

    Hopp, S., Kessler, F., Prenner, M., Stojkovic, S., Pramstaller, M. & Fimbinger, E., Apr 2016, 99 p.

    Research output: Book/Report › Commissioned report › Research

  48. Published

    Technical Report - Finite Element Analysis - 2" Norsok Compact Flange

    Hopp, S., Kessler, F., Stojkovic, S. & Pramstaller, M., Apr 2016, 102 p.

    Research output: Book/Report › Commissioned report › Research

  49. Published

    Technical Report - Finite Element Analysis - 8" Norsok Compact Flange

    Hopp, S., Kessler, F., Stojkovic, S., Pramstaller, M. & Hossain, S., Apr 2016, 96 p.

    Research output: Book/Report › Commissioned report › Research

  50. Published

    Technical Report - Finite Element Analysis - 12" ASME Compact Flange Connector

    Hopp, S., Kessler, F., Stojkovic, S., Pramstaller, M. & Hossain, S., Mar 2016, 110 p.

    Research output: Book/Report › Commissioned report › Research

  51. Published

    Technical Report - Finite Element Analysis - 12" Clamp Connector - Additional Information (Stress Linearization)

    Hopp, S., Kessler, F., Stojkovic, S., Pramstaller, M. & Hossain, S., Mar 2016, 37 p.

    Research output: Book/Report › Commissioned report › Research

  52. Published

    Technical Report - Finite Element Analysis - 4" ASME Compact Flange Connector

    Hopp, S., Kessler, F., Pramstaller, M., Stojkovic, S. & Hossain, S., Mar 2016, 132 p.

    Research output: Book/Report › Commissioned report › Research

  53. Accepted/In press

    Prevention of secondary dust emissions in ironmaking plants using dust suppressants: First Annual Report

    Grübler, C., Kessler, F. & Prenner, M., 23 Feb 2016, (Accepted/In press)

    Research output: Book/Report › Commissioned report › Research

  54. Published

    Technical Report - Finite Element Analysis - 12" Clamp Connector

    Hopp, S., Kessler, F., Stojkovic, S. & Pramstaller, M., Feb 2016, 242 p.

    Research output: Book/Report › Commissioned report › Research

  55. Published

    Technical Report - Finite Element Analysis - 4" - 15'000 psi ball valve

    Hopp, S., Kessler, F., Pramstaller, M. & Stojkovic, S., Jan 2016, 260 p.

    Research output: Book/Report › Commissioned report › Research

  56. Published

    Technical Report - Finite Element Analysis - 4" - 15'000 psi ball valve - Stress Linearization

    Hopp, S., Kessler, F., Pramstaller, M. & Stojkovic, S., Jan 2016, 136 p.

    Research output: Book/Report › Commissioned report › Research

  57. Published

    Technischer Bericht zu Verschleiß- und Traktionsversuchen an Schneeketten

    Hopp, S. & Kessler, F., Jan 2016, 22 p.

    Research output: Book/Report › Commissioned report › Research

  58. 2015
  59. Published

    Technical Report - Finite Element Analysis - Ball valve VII (Stress Linearization)

    Becker, A., Hopp, S., Stojkovic, S. & Kessler, F., Nov 2015, 61 p.

    Research output: Book/Report › Commissioned report › Research

  60. Published

    Technical Report - Finite Element Analysis - Ball valve VI (Elasto-plastic material model - Part A)

    Becker, A., Hopp, S. & Kessler, F., Oct 2015, 97 p.

    Research output: Book/Report › Commissioned report › Research

  61. Published

    Technical Report - Finite Element Analysis - Ball valve VI (Elasto-plastic material model - Part B)

    Becker, A., Hopp, S. & Kessler, F., Oct 2015, 70 p.

    Research output: Book/Report › Commissioned report › Research

  62. Published

    Technical Report - Finite Element Analysis - Ball valve IV (Torque Modeling and Calculation)

    Hopp, S., Becker, A. & Kessler, F., Sept 2015, 58 p.

    Research output: Book/Report › Commissioned report › Research

  63. Published

    Technical Report - Finite Element Analysis - Ball valve V (Torque simplification Modeling)

    Becker, A., Hopp, S. & Kessler, F., Sept 2015, 38 p.

    Research output: Book/Report › Commissioned report › Research

  64. Published

    Technical Report - Finite Element Analysis - Ball valve III (Shape analysis for sealing optimization)

    Becker, A., Hopp, S. & Kessler, F., Aug 2015, 136 p.

    Research output: Book/Report › Commissioned report › Research

  65. Published

    Technical Report - Finite Element Analysis - Ball valve II (Sealing effect for a valve twist)

    Becker, A., Hopp, S. & Kessler, F., Aug 2015, 114 p.

    Research output: Book/Report › Commissioned report › Research

  66. Published

    Technischer Bericht zu Verschleiß- und Traktionsversuchen an Schwerlastketten

    Becker, A. & Kessler, F., 17 Jul 2015, 40 p.

    Research output: Book/Report › Commissioned report › Research

  67. Published

    Technical Report - Finite Element Analysis - Ball valve I (Sealing effect)

    Becker, A., Hopp, S. & Kessler, F., Jul 2015, 251 p.

    Research output: Book/Report › Commissioned report › Research

  68. Published

    Neuartige Gewinnung und Aufbereitung von Sedimenten aus Gewässern

    Becker, A., Morak, H. & Kessler, F., 16 Jan 2015, In: Berg- und hüttenmännische Monatshefte : BHM. 160, 1, p. 32 - 41

    Research output: Contribution to journal › Article › Research › peer-review

  69. 2014
  70. Published

    "Feststoffturbine" im Praxistest

    Prenner, M. & Kessler, F., 2014, Tagungsbericht 19. Fachtagung Schüttgutfördertechnik 2014. p. IV-1-IV-25

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Neuartige Gewinnung und Aufbereitung von Sedimenten aus Gewässern

    Becker, A., Morak, H. & Kessler, F., 2014, Tagungsbericht 19. Fachtagung Schüttgutfördertechnik 2014. p. IX 3-IX 22

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Saugschiff für Flusssedimente

    Morak, H. & Kessler, F., 2014, In: Triple m. p. 10-10

    Research output: Contribution to journal › Article › Research › peer-review

  73. Published

    Stetigförderer

    Kessler, F., 2014, DUBBEL. p. U61-U74

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  74. 2013
  75. Published

    Verfahren zur Aufbereitung von Flusssedimenten sowie Wasserfahrzeug zur Durchführung desselben

    Morak, H. (Inventor), Kessler, F. (Inventor) & Becker, A. (Inventor), 15 Dec 2013, Patent No. A 50196/2012

    Research output: Patent

  76. Published

    Verfahren zur Aufbereitung von Flusssedimenten sowie Wasserfahrzeug zur Durchführung desselben

    Kessler, F. (Inventor), Becker, A. (Inventor), Morak, H. (Inventor) & Dieplinger, K. (Inventor), 17 Apr 2013, Patent No. EP 2 666 557 B1

    Research output: Patent

  77. Published

    Development of an Energy Recovery System for Belt Conveyors

    Prenner, M. & Kessler, F., 2013, In: Bulk solids handling. p. 52-56

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Feststoffturbine optimiert die Energieeffizienz

    Prenner, M. & Kessler, F., 2013, In: Schüttgut. p. 52-56

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Gepäckförderanlagen im Flugverkehr

    Kessler, F., 2013, Gepäckförderanlagen im Flugverkehr. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. 2012
  81. Published

    DEM - Simulation Report C1673 NBWT Stacker

    Sommer, T., Prenner, M., Allmer, M. & Kessler, F., 12 Sept 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  82. Published

    DEM - Simulation Report C1741 EBS Chute: Bridge conveyor to Main conveyor

    Sommer, T., Prenner, M., Allmer, M. & Kessler, F., 16 Aug 2012

    Research output: Book/Report › Commissioned report › Transfer

  83. Published

    Project C1086 Hope Downs Stacker HD4v3

    Sommer, T., Prenner, M., Allmer, M. & Kessler, F., 28 Mar 2012

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  84. Published

    Energy-recovery System for Continuous Conveyors

    Prenner, M. & Kessler, F., 2012, Bulk Solids Europe 2012. Berlin, p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Investigation into Bulk Material Parameters for Discrete Element Simulation

    Prenner, M. & Kessler, F., 2012, XX International Conference on "Material Handling, Constructions and Logistics". p. 25-38

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  86. Published

    Neue Simulationsmethode für Schüttguttransportprozesse

    Prenner, M., Kessler, F., Sommer, T. & Allmer, M., 2012, In: Wanted : das Fachmagazin für technische Ausbildung, Jobs und mehr ... . 3, p. 62-63

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Neue Simulationsmethode für Schüttguttransportprozesse: TUAUSTRIA Austrian Universities of Technology

    Prenner, M., Kessler, F., Sommer, T. & Allmer, M., 2012

    Research output: Non-textual form › Web publication/site › Transfer

  88. 2011
  89. Published

    Gurtfördertechnik

    Kessler, F., 2011, DUBBEL. p. U58-U67

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  90. Published

    Schwingförderer

    Kessler, F., 2011, DUBBEL. Grote, K.-H. & Feldhusen, J. (eds.). 23 ed. Springer, p. U75-U76

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  91. 2010
  92. Published

    Umschlageinrichtungen für den Güterverkehr

    Kessler, F., 2010, green logistics: im Spannungsfeld zwischen Ökonomie und Verantwortung, 8. Internationaler Logistik Sommer ; 16. bis 17. September 2010, Asia Spa Leoben. Leoben, 18 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. 2009
  94. Published

    Research into Material Behaviour in Belt Conveyor Transfer Chutes

    Kessler, F., 2009, XIX International Conference on Material Handling. p. 29-36

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. 2008
  96. Published

    Auswahl des optimalen Förderweges am Beispiel eines Hartgesteinbergbaues

    Kessler, F., 2008, 6.Internationaler Leobener Logistik Sommer. p. 1-26

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Vergleichende Untersuchungen zum Eindring- und Durchziehverhalten von Feinblechen

    Buchmayr, B., Hatzenbichler, T. & Kessler, F., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 443-449

    Research output: Contribution to journal › Article › Research › peer-review

  98. 2007
  99. Published

    Druckluftunterstützte Gurtumlenkung

    Prenner, M., Wirth, S., Kessler, F. & Fuchs, M., 2007, In: Schüttgut. p. 500-507

    Research output: Contribution to journal › Article › Research › peer-review

  100. Published

    Fördermaschinen in der Schüttguttechnik

    Kessler, F. & Hinterholzer, S., 2007, In: Berg- und hüttenmännische Monatshefte : BHM. 152, p. 179-182

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Fördermaschinen in der Schüttguttechnik zum Mischen und Umlagern

    Kessler, F. & Hinterholzer, S., 2007, Fördermaschinen in der Schüttguttechnik zum Mischen und Umlagern. p. 55-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Gurtfördertechnik

    Kessler, F., 2007, DUBBEL. p. 801-820

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  103. Published

    Rectangular Belt Deflection

    Prenner, M., Wirth, S., Kessler, F. & Fuchs, M., 2007, In: Bulk solids handling. 27, 7, p. 324-329

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Schwingförderer

    Kessler, F., 2007, DUBBEL. Grote, K.-H. & Feldhusen, J. (eds.). 22 ed. Springer, p. U73-U74

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  105. 2006
  106. Published

    Antriebskonzept für mehrteilige, teleskopierbare Ausleger

    Kessler, F., 2006, Antriebskonzept für mehrteilige, teleskopierbare Ausleger. p. 41-50

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  107. Published

    Lehrstuhl für Fördertechnik und Konstruktionslehre

    Wirth, S., Kessler, F., Prenner, M. & Hinterholzer, S., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. p. 286-288

    Research output: Contribution to journal › Article › Research › peer-review

  108. Published

    Recent developments in the field of bulk conveying

    Kessler, F., 2006, In: FME transactions. 34, p. 213-220

    Research output: Contribution to journal › Article › Research › peer-review

  109. Published

    Recent Developments in the field of Bulk Conveying

    Kessler, F., 2006, Recent Developments in the Field of Bulk Conveying. p. 51-58

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  110. Published

    Universitärer Forschungscluster "Sustainable Technologies in Metal Production and Processing" (STMP)

    Antrekowitsch, H., Biedermann, H., Buchmayr, B., Ebner, F., Eichlseder, W., Harmuth, H., Kepplinger, W., Kessler, F., Krieger, W., Lorber, K. & Ludwig, A., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 263-265

    Research output: Contribution to journal › Article › Research › peer-review

  111. 2005
  112. Published

    Neuentwicklungen in der Fördertechnik

    Kessler, F., 2005, In: Der Absolvent (Zeitschrift des Verbandes der Absolventen der BFS Bruck/Mur & HTBL Kapfenberg). p. 6-9

    Research output: Contribution to journal › Article › Research › peer-review

  113. 2004
  114. Published

    Alternatives Antriebskonzept für teleskopierbare Ausleger - Teil 1

    Stoschka, M. & Kessler, F., 2004, In: F + H : Fördern und Heben. 54, p. 570-572

    Research output: Contribution to journal › Article › Research › peer-review

  115. Published

    Alternatives Antriebskonzept für teleskopierbare Ausleger - Teil 2

    Stoschka, M. & Kessler, F., 2004, In: F + H : Fördern und Heben. 54, p. 637-639

    Research output: Contribution to journal › Article › Research › peer-review

  116. Published

    Alternatives Antriebskonzept für teleskopierbare Ausleger - Teil I

    Kessler, F. & Stoschka, M., 2004, In: F + H : Fördern und Heben. p. 570-572

    Research output: Contribution to journal › Article › Research › peer-review

  117. Published

    Alternatives Antriebskonzept für teleskopierbare Ausleger - Teil II

    Kessler, F. & Stoschka, M., 2004, In: F + H : Fördern und Heben. p. 637-639

    Research output: Contribution to journal › Article › Research › peer-review

  118. Published

    Berechnung der Antriebsleistung bei RopeCon-Systemen

    Diethardt, P., Kessler, F. & Stoschka, M., 2004, In: Schüttgut. 10, 4, p. 288-293

    Research output: Contribution to journal › Article › Research › peer-review

  119. Published

    Continuous Shaft Conveying in Mining with the Pocketlift System in Comparison to Intermittent Batch Load Type Transport

    Paelke, J. W., Günther, R. & Kessler, F., 2004, In: Bulk solids handling. 24, p. 34-43

    Research output: Contribution to journal › Article › Research › peer-review

  120. Published

    Hellend door de bocht

    Kessler, F., 2004, In: Bulk materials international. p. 32-33

    Research output: Contribution to journal › Article › Research › peer-review

  121. Published

    Kontinuierliche Schachtförderung im Bergbau mit dem Pocketlift-System im Vergleich zur diskontinuierlichen Förderung

    Kessler, F., Paelke, J. & Günther, R., 2004, In: Schüttgut. p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  122. Published

    Kontinuierliche Schachtförderung im Bergbau mit dem Pocketlift-System imVergleich zur diskontinuierlichen Förderung

    Kessler, F., Paelke, J. & Günther, R., 2004

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  123. Published

    Kontinuierliche Schachtförderung im Bergbau mit Pocketlift-Systemen im Vergleich zur diskontinuierlichen Förderung

    Kessler, F., Paelke, J. & Günther, R., 2004, In: Schüttgut. p. 42-51

    Research output: Contribution to journal › Article › Research › peer-review

  124. Published

    Neuentwicklungen in der Schüttgutfördertechnik

    Kessler, F., 2004, Schüttgutfördertechnik. p. 57-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  125. Published

    Untersuchungen zum Bewegungswiderstand von verschränkten Gurtwendungen

    Kessler, F. & Diethardt, P., 2004, In: Schüttgut. p. 446-452

    Research output: Contribution to journal › Article › Research › peer-review

  126. 2003
  127. Published

    Pipe Conveyor with a new belt guidance

    Kessler, F., 2003, Beltcon 2003. p. 47-54

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  128. Published

    RopeCon - the new long distance Conveyor

    Kessler, F. & Frühstück, H., 2003, Beltcon 12. p. 70-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  129. Published

    Technisch/wirtschaftlicher Vergleich der kontinuierlichen und diskontinuierlichen Schüttgutförderung

    Kessler, F. & Diethardt, P., 2003

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  130. 2002
  131. Published

    Calculation of Filling Ratio and mass Flow Rate of the Vertical Screw Conveyor

    Kessler, F., Leitner, J. & Lichtenecker, E., 2002, In: Bulk solids handling. p. 190-195

    Research output: Contribution to journal › Article › Research › peer-review

  132. Published

    Comparison of Different Feeding Devices for Vertical and Steeply Inclined Conveying in Screw Conveyors

    Kessler, F., Leitner, J. & Lichtenecker, E., 2002, In: Bulk solids handling. p. 108-115

    Research output: Contribution to journal › Article › Research › peer-review

  133. Published

    Neuentwicklungen in der Schüttgutfördertechnik

    Kessler, F., 2002, In: Berg- und hüttenmännische Monatshefte : BHM. p. 95-102

    Research output: Contribution to journal › Article › Research › peer-review

  134. Published

    Umfangskraftverteilung bei Gurtförderern mit Zweitrommelantrieben

    Kessler, F., 2002, In: Schüttgut. p. 211-215

    Research output: Contribution to journal › Article › Research › peer-review

  135. 2001
  136. Published

    Betrachtungen zur Gurtführung mit Horizontalkurven

    Kessler, F. & Kartavyi, R., 2001, In: GUS-Fördertechnik Journal. 11, p. x-y

    Research output: Contribution to journal › Article › Research › peer-review

  137. Published

    Garland Stations to Run Through Horizontal Curves

    Hinterholzer, S., Kessler, F. & Grabner, K., 2001, In: Bulk solids handling. 21, 4, p. 424-430

    Research output: Contribution to journal › Article › Research › peer-review

  138. Published

    Girlandenstationen zum Durchfahren von Horizontalkurven

    Kessler, F., Hinterholzer, S. & Grabner, K., 2001, In: Schüttgut. p. 283-289

    Research output: Contribution to journal › Article › Research › peer-review

  139. Published

    Research into a Pipe Conveyor with a Completely New Belt Guidance

    Kessler, F., Hinterholzer, S. & Grabner, K., 2001, In: Bulk solids handling. p. 614-620

    Research output: Contribution to journal › Article › Research › peer-review

  140. Published

    Research on a Pipe Conveyor with a completely new Belt Guidance

    Kessler, F. & Hinterholzer, S., 2001, In: Bulk solids handling. p. 614-620

    Research output: Contribution to journal › Article › Research › peer-review

  141. Published

    Schwingungsmonitoring von Gurtförderanlagen für die zustandsorientierte Instandhaltung

    Kessler, F., Haase, S., Trondl, R. & Luftensteiner, R., 2001, In: Schüttgut. p. 423-427

    Research output: Contribution to journal › Article › Research › peer-review

  142. Published

    Untersuchungen an einem Schlauchgurtförderer mit neu entwickelter Gurtführung

    Kessler, F., Hinterholzer, S. & Grabner, K., 2001, In: Schüttgut. p. 275-281

    Research output: Contribution to journal › Article › Research › peer-review

  143. 2000
  144. Published

    Alternative Kranteleskoparmkonzepte, Machbarkeitsstudie der vorgeschlagenen Varianten und neue Lösungen

    Kessler, F. & Stoschka, M., 2000

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  145. Published

    "bico-TEC" - A New Type of Belt Conveyor with Horizontal Curves

    Kessler, F. & Grabner, K., 2000, In: Bulk solids handling. 1, p. 163-170

    Research output: Contribution to journal › Article › Research › peer-review

  146. Published

    Consideration for Reducing Belt Conveyor Investment Costs

    Kessler, F. & Grimmer, K.-J., 2000, In: Bulk solids handling. 3, p. 115-119

    Research output: Contribution to journal › Article › Research › peer-review

  147. Published

    Erfindung einer neuartigen Drehschieberpumpe

    Kessler, F. & Frank, R., 2000, In: Österreichische Patentzeitschrift. 01.01.2000, p. x-y

    Research output: Contribution to journal › Article › Research › peer-review

  148. Published

    Investigation into the Material Flow at the Intake of Vertical Screw Conveyors

    Kessler, F. & Leitner, J., 2000, In: Bulk solids handling. p. 477-482

    Research output: Contribution to journal › Article › Research › peer-review

  149. Published

    Maßnahmen zur lärmarmen Gestaltung von Schlauchgurtförderern

    Kessler, F., Schlick, A. & Grabner, K., 2000, In: Schüttgut. 6, p. 273-278

    Research output: Contribution to journal › Article › Research › peer-review

  150. Published

    Neuartige Drehschieberpumoe

    Kessler, F., 2000, In: A + / Centre d'Information de l'Architecture, de l'Urbanisme et du Design. p. 188-191

    Research output: Contribution to journal › Article › Research › peer-review

  151. Published

    Operation of the Curve-Going Belt Conveyor "bico-TEC" at Titan Cement, Greece

    Kessler, F., Grabner, K. & Weber, W., 2000, In: Bulk solids handling. 3, p. 163-166

    Research output: Contribution to journal › Article › Research › peer-review

  152. Published

    Patentierte Entwicklung einer neuartigen Streckenführung von Schlauchgurtförderern

    Kessler, F., 2000, In: Der Absolvent (Zeitschrift des Verbandes der Absolventen der BFS Bruck/Mur & HTBL Kapfenberg). p. 10-13

    Research output: Contribution to journal › Article › Research › peer-review

  153. Published

    Prototyp einer Girlandenstation mit selbsttätiger Überhöhungswinkeländerung

    Hinterholzer, S., Kessler, F. & Grabner, K., 2000, In: Forschungsinformationen aus der Montanuniversität Leoben. 1, p. 10-12

    Research output: Contribution to journal › Article › Research › peer-review

  154. Published

    Research into Normal-Forces Between Belt and Idlers at Critical Locations on the Conveyor Track

    Kessler, F. & Grimmer, K.-J., 2000, In: Bulk solids handling. 1, p. 151-158

    Research output: Contribution to journal › Article › Research › peer-review

  155. Published

    The Design of Belt Conveyor with Horizontal Curves

    Kessler, F. & Grimmer, K.-J., 2000, In: Bulk solids handling. 1, p. 41-48

    Research output: Contribution to journal › Article › Research › peer-review

  156. 1999
  157. Published

    Kurvengängiger Gurtförderer

    Kessler, F. (Inventor), 1 Jun 1999

    Research output: Patent

  158. Published

    Schlauchgurtförderer mit neuartiger Gurtrückführung

    Kessler, F. (Inventor) & Hinterholzer, S. (Inventor), 1 Jun 1999

    Research output: Patent

  159. Published

    "Conveyor Park" - Technisch/wirtschaftliche Untersuchungen an neuartigen Stetigförderern

    Kessler, F. & Grabner, K., 1999, In: Forschungsinformationen aus der Montanuniversität Leoben. 01.01.1999, p. 15-18

    Research output: Contribution to journal › Article › Research › peer-review

  160. Published

    Drive-torque Requirements of Vertical SCrew Conveyors Depending on Milling an Jamming Processes in the Radial Clearance between Screw and Casing

    Kessler, F. & Leitner, J., 1999, In: Powder handling & processing. 11, 1, p. 13-18

    Research output: Contribution to journal › Article › Research › peer-review

  161. Published

    Editorial

    Kessler, F., 1999, In: Schüttgut. p. 1-2

    Research output: Contribution to journal › Article › Research › peer-review

  162. Published

    Einfluß des Schneckenspaltes und der Zufuhr des Fördergutes auf den Fördervorgang in Senkrecht-Schneckenförderern

    Kessler, F. & Leitner, J., 1999, In: Forschungsinformationen aus der Montanuniversität Leoben. 01.01.1999, p. x-y

    Research output: Contribution to journal › Article › Research › peer-review

  163. Published

    Gurtförderer mit Girlandenstationen zum Durchlaufen von Horizontalkurven

    Kessler, F., Hinterholzer, S., Grabner, K. & Weixler, K., 1999, In: Forschungsinformationen aus der Montanuniversität Leoben. 01.10.1999, p. x-y

    Research output: Contribution to journal › Article › Research › peer-review

  164. Published

    Gurtförderer mit wippenden Tragrollenstühlen zum Durchfahren von Horizontalkurven mit engen Radien

    Hinterholzer, S., Kessler, F. & Lauhoff, H., 1999, In: Schüttgut. 4, 1, p. 11-19

    Research output: Contribution to journal › Article › Research › peer-review

  165. Published

    Gurtförderer mit wippenden Tragrollenstühlen zum Durchfahren von Horizontalkurven mit engen Radien.

    Kessler, F. & Hinterholzer, S., 1999, In: Forschungsinformationen aus der Montanuniversität Leoben. 2, 1, p. 6 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  166. Published

    Gurtförderer mit wippenden Tragrollenstühlen zum >Durchfahren von Horizontalkurven mit engen Radien

    Kessler, F., Hinterholzer, S. & Lauhoff, H., 1999, In: Schüttgut. p. 11-19

    Research output: Contribution to journal › Article › Research › peer-review

  167. Published

    Investigations into Safety Factors for Conveyor Belt Calculations

    Kessler, F., 1999, In: Bulk materials international. p. 487-491

    Research output: Contribution to journal › Article › Research › peer-review

  168. Published

    Schallmessung an Stetigförderern

    Kessler, F. & Schlick, A., 1999, In: Forschungsinformationen aus der Montanuniversität Leoben. 2, 01.01.1999, p. 2-4

    Research output: Contribution to journal › Article › Research › peer-review

  169. Published

    Technisch/wirtschaftliche Optimierung sowie Gleichlaufregelung eines Pocketlift-Vertikalförderers

    Kessler, F., O´Leary, P. & Grabner, K., 1999, In: Forschungsinformationen aus der Montanuniversität Leoben. 01.10.1999, p. x-y

    Research output: Contribution to journal › Article › Research › peer-review

  170. Published

    Untersuchungen zum Einlauf des Fördergutes in senkrechten Schneckenförderern

    Kessler, F. & Leitner, J., 1999, In: Schüttgut. p. 295-301

    Research output: Contribution to journal › Article › Research › peer-review

  171. Published

    Zum Vergleich verschiedener Gutaufgabevorrichtungen für die senkrechte und steil geneigte Förderung in Schneckenförderern

    Kessler, F. & Leitner, J., 1999, In: Schüttgut. p. 545-554

    Research output: Contribution to journal › Article › Research › peer-review

  172. Published

    Zur Berechnung des Füllgrades und des Volumenstromes von senkrechten Schneckenförderern

    Kessler, F. & Leitner, J., 1999, In: Schüttgut. p. 537-543

    Research output: Contribution to journal › Article › Research › peer-review

  173. 1998
  174. Published

    Economic Production - Horizontal Drilling Technology and UPR´s Activity in the Austin Chalk - Texas USA

    Kessler, F., 1998, In: The new petroleum world. 01.12.1998, p. 3-5

    Research output: Contribution to journal › Article › Research › peer-review

  175. Published

    Kurvengängiger Bandförderer macht Aufbereitungsanlagen wirtschaftlicher

    Kessler, F., 1998, In: Bau im Spiegel. 31, 4=01.12.1998, p. 2-3

    Research output: Contribution to journal › Article › Research › peer-review

  176. Published

    Non-positive guidance of belt conveyors through horizontal curves

    Kessler, F., Hinterholzer, S. & Grimmer, K.-J., 1998, In: Bulk solids handling. p. 71-74

    Research output: Contribution to journal › Article › Research › peer-review

  177. Published

    Untersuchung der erforderlichen Antriebsleistung von Senkrechtschneckenförderern infolge Mahl- und Quetschvorgängen im Schneckenspalt

    Kessler, F. & Leitner, J., 1998, In: Schüttgut. p. 363-369

    Research output: Contribution to journal › Article › Research › peer-review

  178. Published

    Untersuchungen des Sicherheitsfaktors für die Berechnung von Fördergurten in Gurtförderanlagen

    Kessler, F., 1998, In: Schüttgut. p. 351-355

    Research output: Contribution to journal › Article › Research › peer-review

  179. Published

    Vertical Conveyors for Bulk Material - The economic solution

    Kessler, F., Grabner, K. & Paelke, J. W., 1998, In: Bulk solids handling. p. 443-449

    Research output: Contribution to journal › Article › Research › peer-review

  180. 1997
  181. Published

    Aktuelle Forschung am Institut für Fördertechnik und Konstruktionslehre

    Kessler, F. & Grimmer, K.-J., 1997, In: Berg- und hüttenmännische Monatshefte : BHM. p. 160-165

    Research output: Contribution to journal › Article › Research › peer-review

  182. Published

    Consideration for Reducing Belt Conveyor Investment Costs

    Kessler, F. & Grimmer, K.-J., 1997, In: Bulk solids handling. p. 41-45

    Research output: Contribution to journal › Article › Research › peer-review

  183. Published

    Convoyeur courbe à récupération d'énergie

    Kessler, F., Grabner, K. & Weber, W., 1997, In: Mines & carrières. 01.07.1997, p. 61-64

    Research output: Contribution to journal › Article › Research › peer-review

  184. Published

    Drillpipe Fatique Life Prediction Model Based on Critical Plane Approaches

    Kessler, F. & Placido, J. C., 1997, In: The new petroleum world. 1, p. x-y

    Research output: Contribution to journal › Article › Research › peer-review

  185. Published

    Einsatz des kurvengängign Gurtförderers "bico-TEC" bei Titan-Cement / Griechenland

    Kessler, F., Grabner, K. & Weber, W., 1997, In: Schüttgut. p. 166-169

    Research output: Contribution to journal › Article › Research › peer-review

  186. Published

    Gurtförderer mit Horizontalkurven und kraftschlüssiger Gurtführung

    Kessler, F. & Grimmer, K.-J., 1997, In: Gép. 01.06.1997, p. 20-24

    Research output: Contribution to journal › Article › Research › peer-review

  187. Published

    Improved cornering with bico-TEC at Titan-Cement

    Kessler, F., Grabner, K. & Weber, W., 1997, In: World Cement. 28, 6, p. 64-66

    Research output: Contribution to journal › Article › Research › peer-review

  188. Published

    Kraftschlüssige Gurtführung von Gurtförderern mit Horizontalkurven

    Kessler, F. & Grimmer, K.-J., 1997, In: Schüttgut. p. 161-165

    Research output: Contribution to journal › Article › Research › peer-review

  189. Published

    Most modern drilling platform - Ekofisk 2/4X

    Kessler, F., 1997, In: The new petroleum world. 10.10.1997, p. 10-11

    Research output: Contribution to journal › Article › Research › peer-review

  190. Published

    Operation of the Curve-Going Belt Conveyor "bico-TEC"

    Kessler, F., Grabner, K. & Weber, W., 1997, In: International cement journal. 01.01.1997, p. 93-97

    Research output: Contribution to journal › Article › Research › peer-review

  191. Published

    Operation of the Curve-Going Belt Conveyor "bico-TEC" at Titan Cement, Greece

    Grabner, K., Kessler, F. & Weber, W., 1997, In: Bulk solids handling. 17, 2, p. 266-269

    Research output: Contribution to journal › Article › Research › peer-review

  192. Published

    Tragrollenstationen für Gurtförderer mit Horizontalkurven

    Kessler, F., Hinterholzer, S. & Grimmer, K.-J., 1997, In: Berg- und hüttenmännische Monatshefte : BHM. p. 505-508

    Research output: Contribution to journal › Article › Research › peer-review

  193. Published

    Überlegungen zum dynamischen Drehmomentenausgleich bei Tiefpumpenantrieben

    Kessler, F., 1997, In: Erdöl, Erdgas, Kohle. p. 67-70

    Research output: Contribution to journal › Article › Research › peer-review

  194. Published

    Vertical Conveyors for Bulk Materials - The Economic Solution

    Kessler, F. & Grabner, K., 1997, Vertical Conveyors for Bulk Materials - The Economic Solution. p. xx-yy

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  195. 1996
  196. Published

    Beanspruchungen im Verbinderteil von Bohrgestängen beim Bohren um Radien

    Kessler, F., 1996, In: Erdöl, Erdgas, Kohle. p. 300-304

    Research output: Contribution to journal › Article › Research › peer-review

  197. Published

    Überlegungen zur Verringerung der Investitionskosten bei Gurtförderern

    Kessler, F. & Grimmer, K.-J., 1996, In: Schüttgut. p. 379-383

    Research output: Contribution to journal › Article › Research › peer-review

  198. 1995
  199. Published

    "bico-TEC" - Horizontal Conveyor Belts Travelling in a Curved Direction

    Kessler, F. & Grabner, K., 1995, "bico-TEC" - Horizontal Conveyor Belts Travelling in a Curved Direction. p. 30-48

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  200. Published

    Dehnungsverteilung in Fördergurten beim Einlauf in die Gurtmulde

    Kessler, F. & Grimmer, K.-J., 1995, In: Berg- und hüttenmännische Monatshefte : BHM. p. 185-189

    Research output: Contribution to journal › Article › Research › peer-review

  201. Published

    Einstellung der Gegengewichte von Tiefpumpenantrieben mit dynamischem Momentenausgleich

    Kessler, F. & Huber, M., 1995, In: Erdöl, Erdgas, Kohle. p. 163-166

    Research output: Contribution to journal › Article › Research › peer-review

  202. Published

    Fördertechnische Überlegungen zum Massenschüttguttransport

    Kessler, F. & Grimmer, K.-J., 1995, In: Schüttgut. p. 47-55

    Research output: Contribution to journal › Article › Research › peer-review

  203. Published

    Geometrieoptimierung des obertägigen konventionellen Tiefpumpenantriebes

    Kessler, F. & Huber, M., 1995, In: Erdöl, Erdgas, Kohle. p. 17-20

    Research output: Contribution to journal › Article › Research › peer-review

  204. Published

    Gewinnungs- und Fördermaschinen im Berg- und Erdölwesen

    Kessler, F., 1995

    Research output: Thesis › Habilitation thesis › peer-review

  205. 1994
  206. Published

    "bico-TEC" - A New Type of Belt Conveyor with Horizontal Curves

    Kessler, F. & Grabner, K., 1994, "bico-TEC" - A New Type of Belt Conveyor with Horizontal Curves. p. 77-83

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  207. Published

    Drillpipe Fatique Life Prediction Model Based on Critical Plane Approaches

    Kessler, F., Placido, J. C. & Azar, J. J., 1994, Drillpipe Fatique Life Prediction Model Based on Critical Plane Approaches. p. 523-532

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  208. Published

    Ein horizontalkurvengängiger Gurtförderer in neuartiger Bauweise

    Kessler, F., Grabner, K. & Grimmer, K.-J., 1994, Ein horizontalkurvengängiger Gurtförderer in neuartiger Bauweise. p. 265-277

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  209. Published

    Ein kurvengängiger Gurtförderer mit pendelnder Aufhängung

    Kessler, F., Grabner, K. & Grimmer, K.-J., 1994, In: F + H : Fördern und Heben. p. 77-80

    Research output: Contribution to journal › Article › Research › peer-review

  210. 1993
  211. Published

    "bico-TEC" - A New Type of Belt Conveyor with Horizontal Curves

    Kessler, F., Grabner, K. & Grimmer, K.-J., 1993, In: Bulk solids handling. 13, 4, p. 741-747

    Research output: Contribution to journal › Article › Research › peer-review

  212. Published

    Research into Normal-Forces Between Belt and Idlers at Critical Locations on the Conveyor Track

    Kessler, F., Grabner, K. & Grimmer, K.-J., 1993, In: Bulk solids handling. p. 727-734

    Research output: Contribution to journal › Article › Research › peer-review

  213. Published

    The Design of Belt Conveyor with Horizontal Curves

    Kessler, F. & Grimmer, K.-J., 1993, In: Bulk solids handling. p. 557-563

    Research output: Contribution to journal › Article › Research › peer-review

  214. Published

    Zur Problematik der Drillometeranzeige bei Bohranlagen

    Kessler, F., 1993, In: Erdöl, Erdgas, Kohle. p. 160-163

    Research output: Contribution to journal › Article › Research › peer-review

  215. 1991
  216. Published

    Analyse der dynamischen Belastungen eines Doppelschneidantriebes infolge Lastspitzen und Blockaden

    Kessler, F., Zitz, A. & Siebenhofer, J., 1991, In: Berg- und hüttenmännische Monatshefte : BHM. p. 203-208

    Research output: Contribution to journal › Article › Research › peer-review

  217. Published

    Autofrettage - Calculation of thick walled cylinders performed on a VAX computer by use of a fortran 77 program

    Kessler, F. & Schedelmaier, J., 1991

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  218. Published

    Die Zusammenarbeit der Institutes für Fördertechnik und Konstruktionslehre mit der Industrie

    Kessler, F., 1991.

    Research output: Contribution to conference › Poster › Research › peer-review

  219. Published

    Forschungsprojekte des Institues für Fördertechnik und Konstruktionslehre

    Kessler, F., 1991.

    Research output: Contribution to conference › Poster › Research › peer-review

  220. Published

    Zur Auslegung von Gurtförderern mit Horizontalkurven

    Kessler, F. & Grimmer, K.-J., 1991, In: F + H : Fördern und Heben. p. 428-432

    Research output: Contribution to journal › Article › Research › peer-review

  221. 1990
  222. Published

    Einfluß der Muldungsfähigkeit des Fördergurtes auf die Verteilung der Normalkräfte zwischen Gurt und Tragrollen

    Kessler, F., 1990, In: Hebezeuge und Fördermittel. p. 8-11

    Research output: Contribution to journal › Article › Research › peer-review

  223. Published

    Forschungsarbeiten am Institut für Fördertechnik und Konstruktionslehre der Montanuniversität Leoben

    Kessler, F., Grimmer, K.-J., Grabner, K. & Zechner, J., 1990, In: Berg- und hüttenmännische Monatshefte : BHM. p. 355-363

    Research output: Contribution to journal › Article › Research › peer-review

  224. 1989
  225. Published

    Untersuchung des dynamischen Verhaltens eines Doppelschneidantriebes mit Ausgleichswelle am Beispiel eines Continuous Miners

    Kessler, F., Siebenhofer, J. & Zitz, A., 1989, Untersuchung des dynamischen Verhaltens eines Doppelschneidantriebes mit Ausgleichswelle am Beispiel eines Continuous Miners. p. 93-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  226. Published

    Untersuchungen des Schüttgutverhaltens bei seitlicher Auswanderung des Gurtes in der Tragrollenmulde eines Gurtförderers

    Kessler, F., 1989, In: Berg- und hüttenmännische Monatshefte : BHM. p. 35-40

    Research output: Contribution to journal › Article › Research › peer-review

  227. 1988
  228. Published

    Einfluß der Muldungsfähigkeit des Fördergurtes auf die Verteilung der Normalkräfte zwischen Gurt und Tragrollen

    Kessler, F., 1988, Einfluß der Muldungsfähigkeit des Fördergurtes auf die Verteilung der Normalkräfte zwischen Gurt und Tragrollen. p. 16-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  229. 1987
  230. Published

    Spezielle Betrachtungen zur Gurtführung bei Gurtförderern mit Horizontalkurven

    Kessler, F. & Grimmer, K.-J., 1987, In: Berg- und hüttenmännische Monatshefte : BHM. p. 206-211

    Research output: Contribution to journal › Article › Research › peer-review

  231. Published

    Spezielle Betrachtungen zur Gurtführung bei Gurtförderern mit Horizontalkurven Teil.1

    Kessler, F. & Grimmer, K.-J., 1987, In: Berg- und hüttenmännische Monatshefte : BHM. 132, 2, p. 27-32

    Research output: Contribution to journal › Article › Research › peer-review

  232. Published

    Vorschläge zur verbesserten Auslegung des Gurtlaufes bie Bandförderanlagen mit Horizontalkurven

    Kessler, F. & Grimmer, K.-J., 1987, Vorschläge zur verbesserten Auslegung des Gurtlaufes bie Bandförderanlagen mit Horizontalkurven. p. 267-276

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

View graph of relations

Latest Research Output

View more (201)