Florian Grün

201 - 300 out of 392Page size: 100

Research output

  1. 2016
  2. Published

    Wear detection by acoustic emissions

    Bergmann, P., Grün, F. & Stadler, G., 2016.

    Research output: Contribution to conference › Presentation › Research

  3. 2015
  4. Published

    START-STOP OPERATION AS INFLUENCE FACTOR ON PLAIN BEARING LIFETIME

    Summer, F., Grün, F., Offenbecher, M. & Lainé, E., 4 Nov 2015.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    Tribological study of crankshaft bearing systems: Comparison of forged steel and cast iron counterparts under start–stop operation

    Summer, F., Grün, F., Schiffer, J., Godor, I. & Papadimitriou, I., 8 Jul 2015, In: Wear. 338-339, p. 232-241

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Simulative Investigations of a Close-to-Component Journal Bearing System and Comparison with Test Data

    Bergmann, P., Grün, F., Godor, I. & Hager, G., 5 Jun 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  7. Published

    Tribometric assessment of start stop journal bearing wear with the aid of a component close test methodology

    Summer, F., Grün, F., Godor, I., Offenbecher, M. & Lainé, E., 3 Jun 2015, Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Influence of Manufacturing Technology on the Loadability of Gear Systems

    Grün, F., Godor, I. & Dietrich, A., 17 Apr 2015, Proceedings of the European All-Wheel Drive Congress 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Development of Ring on Disc Tests for Elastomeric Sealing Materials

    Hausberger, A., Grün, F., Godor, I., Pinter, G. & Schwarz, T., 2015, Proceedings of the International Tribology Conference 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Fatigue assessment of universal cardan joint based on laboratory specimen tests

    Palma, P., Leitner, M. & Grün, F., 2015.

    Research output: Contribution to conference › Paper

  11. Published

    Integration of Local Material Properties into Fatigue Design for Engineering Materials

    Kainzinger, P., Grün, F., Redik, S. & Mösenbacher, A., 2015.

    Research output: Contribution to conference › Presentation › Research

  12. Published

    Investigation of Influences on the Material Behavior of sgfr Plastics based on a Local S/N-curves Concept

    Primetzhofer, A., Mösenbacher, A., Grün, F. & Koblmiller, T., 2015.

    Research output: Contribution to conference › Poster › Research

  13. Published

    Technische Polymere für Tribo-Anwendungen Möglichkeiten und Herausforderungen

    Hausberger, A., Godor, I., Grün, F. & Pinter, G., 2015.

    Research output: Contribution to conference › Presentation › Research

  14. Published

    Tribological in-situ evaluation of lubricated contacts of real-life engineering materials

    Grün, F., Godor, I., Summer, F., Bergmann, P. & Moder, J., 2015, Proceedings of 3rd OilDoc Conference and Exhibition. Rosenheim

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Tribologie im Motorenbau

    Grün, F., 2015, Neue Technologien und Innovationen in der Fahrzeugtechnik XII - Proceedings. Steyr

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. 2014
  17. E-pub ahead of print

    Einfluss der lokalen Gefügeausbildung auf die Schwingfestigkeit von Gusseisen mit Kugelgraphit

    Kainzinger, P., Wohlfahrt, M. & Grün, F., 6 Dec 2014, (E-pub ahead of print) In: Berg- und hüttenmännische Monatshefte : BHM. 160.2015, 1, p. 2-8 7 p.

    Research output: Contribution to journal › Article › Research

  18. Published

    Tribological modeltesting in powertrains

    Grün, F., Godor, I. & Krampl, H., 7 Nov 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  19. Published

    Auslegung von Bauteilen mit "realen" Werkstoffen

    Kainzinger, P., Grün, F., Redik, S. & Mösenbacher, A., 24 Oct 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  20. Published

    Mean Stress Sensitivity of Ductile Iron with respect to Technological and Statistical Size Effect Considerung Defects

    Kainzinger, P. & Grün, F., 13 Jun 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  21. Published

    Mechanisms of fatigue-crack initiation and their impact on fatigue life of AlSi7 die-cast-components

    Redik, S., Tauscher, M. & Grün, F., 13 Jun 2014.

    Research output: Contribution to conference › Presentation › Research › peer-review

  22. Published

    Assessment of the effect of tensile Overloads on the Fatigue Behaviour of quenched and tempered Steel

    Garb, C., Strohhaüssl, B., Winter, G. & Grün, F., 1 Jan 2014, 31st Danubia-Adria Symposium on Advances in Experimental Mechanics, DAS 2014 - Proceedings. p. 30-31 2 p. (31st Danubia-Adria Symposium on Advances in Experimental Mechanics, DAS 2014 - Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Assessment of the effect of tensile overloads on the fatigue behaviour of quenched and tempered steel

    Garb, C., Grün, F., Winter, G. & Strohhäussl, B., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Comparison of microstructural crack paths between hypo-eutectic Al-Si-Cu and Al-Si-Mg cast alloys in high plasticity regimes under rotating bending

    Huter, P., Winter, G., Renhart, P., Schwab, M., Oberfrank, S., Grün, F. & Stauder, B., 2014, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 618, p. 578-585

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Contact fatigue life investigations and wear mechanisms of gears with different steels and hardening process

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2014, 5th World Tribology Congress, WTC 2013. Vol. 3. p. 2620-2623 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Efficient material development for elastomeric sealing materials via the correlation between tribological model tests and component testing

    Hausberger, A., Godor, I. & Grün, F., 2014, Book of Abstracts of Asiatrib 2014. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Leichtbau durch optimale Ausnutzung des Werkstoffs am Beispiel von Gusseisen mit Kugelgraphit

    Kainzinger, P. & Grün, F., 2014, In: Gießerei-Rundschau. 61, p. 347-352

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Leichtbau durch optimale Ausnutzung des Werkstoffs am Beispiel von Gusseisen mit Kugelgraphit

    Kainzinger, P. & Grün, F., 2014, Gießen als Innovatsionsträger bei der Bauteilentwicklung: Material- und Energieeffizienz. p. 27-27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014, Tribologie in Industrie und Forschung: Werkstoffe, Konstruktion und Technologie. p. 3-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Maschinenbau, Werkstoffkompetenz und Werkstoffanwendung - Tribologische Aufgabenstellungen

    Grün, F., Galler, R., Prenner, M., Supancic, P., Mitterer, C., Ebner, R., Hausberger, A., Schlögl, S., Buchmayr, B., Godor, I., Leitner, M. & Krampl, H., 2014.

    Research output: Contribution to conference › Presentation › Research

  31. Published

    Methodology for Design and Evaluation of highly loaded Hertzian Contacts

    Grün, F., Krampl, H., Godor, I. & Trausmuth, A., 2014, Proceedings of 19th International Colloquium Tribology. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Numerical and experimental investigation of non-conformal lubricated contacts

    Moder, J., Krampl, H. & Grün, F., 2014.

    Research output: Contribution to conference › Presentation › Research

  33. Published

    Optimierung tribologischer Testmethoden für die Dichtungstechnik

    Hausberger, A., Godor, I., Grün, F., Pinter, G. & Schwarz, T., 2014, Tribologie in Industrie und Forschung: Werkstoffe, Konstruktion und Technologie. p. 17-24

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Tribological analysis of lubricated non-conforming contacts

    Moder, J., Krampl, H. & Grün, F., 2014, Tribologie in Industrie und Forschung: Werkstoffe, Konstruktion und Technologie. p. 137-142

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Tribological Contact Loadings of Sealing Materials

    Hausberger, A., Krampl, H., Godor, I., Grün, F. & Schwarz, T., 2014, Proceedings of 19th International Colloquium Tribology. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Tribological investigations of journal bearings by means of a close to component test methodology

    Bergmann, P., Summer, F., Grün, F., Godor, I., Offenbecher, M. & Lainé, E., 2014, Tribologie in Industrie und Forschung. Werkstoffe, Konstruktion und Technologie. Vortragsunterlagen. p. 113-121

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Tribological performance of forged steel and cast iron crankshafts on model scale

    Summer, F., Grün, F., Schiffer, J., Gódor, I. & Papadimitriou, I., 2014, 5th World Tribology Congress, WTC 2013. Vol. 3. p. 2155-2158 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Tribometric performance of polymer overlays by contrast with other bearing materials

    Summer, F., Grün, F., Godor, I., Offenbecher, M. & Lainé, E., 2014, Symposium 2014 - Tribologie in Industrie und Forschung. p. 159-166

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. 2013
  40. Published

    Applicability of ring-on-disc and pin-on-plate test methods for Cu-steel and Al-steel systems for large area conformal contacts

    Pondicherry, K. S., Grün, F., Gódor, I., Bertram, R. & Offenbecher, M., Apr 2013, In: Lubrication science. 25, 3, p. 231-247 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Applicability of Ring-on-Disc and Pin-on-Plate Test Methods for Cu-Steel and Al-Steel Systems for Lare Area Conformal Contacts

    Pondicherry, K., Grün, F., Godor, I., Bertram, R. & Offenbecher, M., 2013, In: Lubrication science. p. 1-1

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    BERECHNUNGSANSATZ FÜR REIBDAUERERMÜDUNG

    Christiner, T., Reiser, J., Maier, B., Grün, F., Godor, I., Trieb, F., Stühlinger, R. & Herbst, K., 2013, In: Automobiltechnische Zeitschrift : ATZ . 115, 12, p. 1000-1006

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Calculation Approach for the Assessment of Fretting

    Christiner, T., Reiser, J., Maier, B., Grün, F., Godor, I., Trieb, F., Stühlinger, R. & Herbst, K., 2013, In: ATZ worldwide. 115, 12, p. 39-43

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Comprehensive Study of ZDDP-tribofilms Formed under Soft Contact Conditions

    Pondicherry, K., Grün, F., Summer, F., Godor, I., Lainé, E. & Offenbecher, M., 2013, Proceedings of 5th World Tribology Congress (WTC). p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Contact fatigue life and wear mechanisms of case hardened and nidrided steels

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2013, Proceedings of Baltmatrib 2013. p. 18-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Contact fatigue life investigations and wear mechanisms of different case hardened surfaces under rolling contact loading for gears

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2013, VDI Berichte 2199.1. p. 497-509

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Damage oriented tribological model testing for internal combustion engines – Design of laboratory test strategies

    Grün, F., Godor, I., Schiffer, J., Trausmuth, A. & Krampl, H., 2013, In: Tribologie und Schmierungstechnik. 60, p. 5-12

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Investigations of Wear on System Camshaft/Tappet

    Wohlfahrt, M., Grün, F. & Godor, I., 2013

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Kontaktermüdung und Verschleiß von einsatzgehärteten Stählen und Nitrierschichten

    Trausmuth, A., Badisch, E., Godor, I., Stoschka, M., Grün, F. & Dietrich, A., 2013, Proceedings der Tribologie Fachtagung 2013 der Gesellschaft für Tribologie (GfT). p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Nano-Mechanical and Chemical Characterization of Tribofilms Formed Under Conformal Contact Conditions

    Pondicherry, K., Schöberl, T., Grün, F., Summer, F., Godor, I., Lainé, E. & Offenbecher, M., 2013, Proceedings of 68th Annual STLE Meeting. p. 1-3

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Novel trends in journal slide bearing technology - active use of tribochemical effects

    Offenbecher, M., Li, H., Lainé, E., Grün, F. & Pondicherry, K., 2013, Proceedings of CIMAC World Congress on Combustion Engine Technology. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Optimization of the piston ring - cylinder liner system in gas-engines for power generation

    Schiffer, J., Krampl, H., Godor, I., Grün, F., Betz, M. & Laiminger, S., 2013, 27th CIMAC World Congress on Combustion Engine Technology. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Tribological performance of forged steel and cast iron crankshafts on model scale

    Summer, F., Grün, F., Schiffer, J., Godor, I. & Papadimitriou, I., 2013, World Tribology Congress 2013. p. 753-756

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Tribological performance of forged steel and cast iron crankshafts on model scale

    Summer, F., Grün, F., Schiffer, J., Godor, I. & Papadimitriou, I., 2013.

    Research output: Contribution to conference › Poster › Research › peer-review

  55. Published

    Tribological test principles for power train applications

    Grün, F., Godor, I., Schiffer, J., Krampl, H. & Trausmuth, A., 2013, Proceedings of 2nd Oildoc Conference and Exhibition. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    Tribometric Development Tools for Journal Bearings – a novel test adapter

    Grün, F., Krampl, H., Schiffer, J., Moder, J., Godor, I. & Offenbecher, M., 2013, Proceedings of 5th World Tribology Congress (WTC). p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Vom tribologischen Modellversuch zur Bauteilprüfung

    Hausberger, A., Godor, I., Grün, F., Pinter, G. & Schwarz, T., 2013, 22. Leobener Kunststoff-Kolloquium: Oberflächen und Grenzflächen in der Polymertechnologie. p. 150-157

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. 2012
  59. Published

    Tribological functionality of aluminium sliding materials with hard phases under lubricated conditions

    Grün, F., Summer, F., Pondicherry, K. S., Gódor, I., Offenbecher, M. & Lainé, E., 1 Dec 2012, In: Wear. 298-299.2013, 15 February, p. 127-134 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  60. Published

    3rd Fatigue Sypmposium, Lightweight Design

    Eichlseder, W. (Editor) & Grün, F. (Editor), 2012, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  61. Published

    Comparison of Fatigue Behavior of Different Materials under Rolling Contact Fatigue

    Magritzer, M., Wohlfahrt, M., Guster, C., Godor, I. & Grün, F., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  62. Published

    Damage oriented tribological model testing for internal combustion engines - Design of laboratory test strategies

    Grün, F., Godor, I., Schiffer, J., Pondicherry, K., Trausmuth, A. & Krampl, H., 2012, Technische Akademie Esslingen. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    Design of test methodologies for fretting investigations

    Strohhäussl, B., Reiser, J., Godor, I. & Grün, F., 2012, 3rd Fatigue Symposium - Lightweight Design. p. 287-294

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  64. Published

    Effect of counterpart material on the tribological performances of Al- and Cu-based sliding materials

    Summer, F., Grün, F., Pondicherry, K., Godor, I., Offenbecher, M. & Lainé, E., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  65. Published

    Effect of counterpart material on the tribological performances of Al- and Cu-based sliding materials

    Summer, F., Grün, F., Pondicherry, K., Godor, I., Offenbecher, M. & Lainé, E., 2012, 3rd Fatigue Symposium Leoben Conference Transcript. p. 311-314

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Fatigue Life Investigations of Different Case Hardened Specimens under Rolling Contact Loading for Gears

    Trausmuth, A., Godor, I., Stoschka, M., Dietrich, A., Grün, F. & Eichlseder, W., 2012, 3rd Fatigue Sypmposium. p. 295-310

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Fatigue Life Investigations of Differently Hardened Specimens in Lubricated Tribological Rolling Contacts

    Trausmuth, A., Godor, I., Grün, F., Stoschka, M., Dietrich, A. & Eichlseder, W., 2012, Technische Akademie Esslingen. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Numerical and experimental investigation of non-conformal lubricated contects

    Krampl, H., Grün, F. & Godor, I., 2012, Nordic Symposium on Tribology. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Optimierung geschmierter Tribokontakte auf Basis tribometrischer und numerischer Untersuchungen

    Krampl, H., Grün, F. & Godor, I., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  70. Published

    Rechnerische und experimentelle Untersuchung der Schmierfilmbildung in Tribokontakten mittels kommerzieller Softwarepakete

    Krampl, H., Grün, F. & Godor, I., 2012, In: Tribologie und Schmierungstechnik. 59, p. 7-12

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    Simulation of tribological functionality of heterogeneous tribomaterials

    Grün, F., Godor, I., Sailer, W. & Gänser, H.-P., 2012, In: Tribology International. 46, p. 119-127

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Synergy between secondary phases in aluminium based tribomaterials and lubrucant additives

    Pondicherry, K., Grün, F., Summer, F., Godor, I., Lainé, E. & Offenbecher, M., 2012, 15th Nordic Symposium on Tribology. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Tribological funtionality of aluminium sliding materials with hard phases under lubricated conditions

    Grün, F., Summer, F., Pondicherry, K., Godor, I., Lainé, E. & Offenbecher, M., 2012, In: Wear. p. 127-134

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Tribological testing of lubricated mechanical contacts

    Grün, F., Godor, I., Schiffer, J., Krampl, H. & Pondicherry, K., 2012, 3rd Fatigue Sypmposium. p. 266-267

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  75. Published

    Visualization of the processes taking place in the contact zone with in-situ tribometry

    Grün, F., Sailer, W. & Godor, I., 2012, In: Tribology International. 48, p. 44-53

    Research output: Contribution to journal › Article › Research › peer-review

  76. 2011
  77. Published

    Aluminum Based Sliding Materials with Soft Phases-Intrinsic For-giving Overload Behavior?

    Grün, F., Gódor, I. & Eichlseder, W., 3 Feb 2011, Friction, Wear and Wear Protection: International Symposium on Friction, Wear and Wear Protection 2008 Aachen, Germany. Wiley-VCH , p. 45-51 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  78. Published

    AP3: Optimierung der Ventiltriebe von Großmotoren hinsichtlich Lebensdauer und Optimierung der Reibungsverluste

    Godor, I., Grün, F. & Magritzer, M., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  79. Published

    Describing different operating regimes of journal bearing materials by pressure velocity diagrams derived from ring-on-disc model testing

    Grün, F., Godor, I., Gärtner, W. & Eichlseder, W., 2011, In: Proceedings of the Institution of Mechanical Engineers. Part J, Journal of engineering tribology. p. 617-626

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Functionality of heterogeneous sliding materials for conformal contacts

    Grün, F., 2011

    Research output: Thesis › Habilitation thesis › peer-review

  81. Published

    Interactions between heterogeneous aluminium sliding materials and lubricants

    Grün, F., Summer, F., Pondicherry, K., Godor, I., Lainé, E. & Offenbecher, M., 2011, Proceedings of ECOTRIB Conference 2011. p. 703-708

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  82. Published

    Microscopy study of tribofilms formed on lubricated surfaces under different contact conditions

    Pondicherry, K., Grün, F., Godor, I., Krampl, H., Lainé, E. & Offenbecher, M., 2011, Proceedings of ECOTRIB Conference 2011. p. 575-580

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Novel methodology for the calculation of local loadings in lubricated heterogeneous tribosystems

    Krampl, H., Grün, F. & Godor, I., 2011, Proceedings of ECOTRIB Conference 2011. p. 709-714

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Rheologische Flüssigkeitsmodelle für Hertzsche Kontakte und deren messtechnische Validierung

    Krampl, H., Grün, F. & Godor, I., 2011, Proceedings Symposium 2011 der Österreichischen Tribologischen Gesellschaft. p. 97-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Tribological performance of thin overlays for journal bearings

    Grün, F., Godor, I., Gärtner, W. & Eichlseder, W., 2011, In: Tribology International. 44, p. 1271-1280

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Tribologische Versuche an Gleitwerkstoffen

    Grün, F., Summer, F. & Godor, I., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  87. Published

    Tribologische Wirkungsweisen sekundärer Hart- und Weichphasen in geschmierten, aluminiumbasierten Gleitsystemen

    Summer, F., Grün, F., Pondicherry, K., Godor, I., Lainé, E. & Offenbecher, M., 2011, Proceedings Symposium 2011 der Österreichischen Tribologischen Gesellschaft. p. 57-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Visualization of the processes taking place in the contact zone with in-situ tribometry

    Grün, F., Sailer, W. & Godor, I., 2011, In: Tribology International. p. 1-10

    Research output: Contribution to journal › Article › Research › peer-review

  89. 2010
  90. Published

    Tribologische funktionsweise von ungefüllten und gefüllten TPU-dictungsmaterialen - Ein erfahrungsbericht

    Gódor, I., Schiffer, J., Grün, F., Major, Z. & Schwarz, T., 1 Dec 2010, In: Tribologie und Schmierungstechnik. 57, 4, p. 21-27 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    A Model Scale Test Method for the Piston Ring - Cylinder Liner Tribosystem of Internal Combustion Engines

    Schiffer, J., Godor, I., Grün, F. & Eichlseder, W., 2010, In: The archive of mechanical engineering : quarterly (Archiwum budowy maszyn). 57, p. 331-341

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Analyse der Schmierfilmbildung tribologischer Modellsysteme mithilfe kommerzieller Softwarepakete

    Krampl, H., Grün, F. & Godor, I., 2010, Wettbewerbsvorsprung durch tribologische Innovationen Beherrschung von Reibung und Verschleiß durch Oberflächen- u. Schmierstofftechnik. p. 127-136

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Bewertung des tribologischen Verhaltens von unterschiedlich modifizierten Grauguss-Zylinderlaufbahnen auf Modellmaßstab

    Schiffer, J., Godor, I., Grün, F., Eichlseder, W., Dibiasi, W. & Strobl, V., 2010, Zylinderlaufbahn, Kolben, Pleuel - Innovative Systeme im vergleich; VDI-Berichte 2109. p. 297-300

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  94. Published

    Bewertung des tribologischen Verhaltens von unterschiedlich modifizierten Grauguß-Zylinderlaufbuchsen auf Modellmaßstab

    Schiffer, J., Godor, I., Grün, F., Eichlseder, W., Dibiasi, W. & Strobl, V., 2010.

    Research output: Contribution to conference › Poster › Research › peer-review

  95. Published

    Characterization and simulation of tribological functionality of heterogeneous tribomaterials

    Grün, F., Godor, I., Sailer, W. & Schiffer, J., 2010, 37th Leeds-Lyon Symposium 2010 - Synopses. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  96. Published

    Design of a novel methodology for in-situ-investigation of contact conditions

    Sailer, W., Grün, F., Godor, I. & Gänser, H.-P., 2010, Design of a novel methodology for in-situ-investigation of contact conditions. p. 55-55

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  97. Published

    Elucidating the Differences between Ring-on-Disc and Pin-on-Plate Tribometric Test Approaches

    Pondicherry, K., Grün, F., Godor, I., Bertram, R. & Offenbecher, M., 2010, 37th Leeds-Lyon Symposium 2010 - Synopses. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  98. Published

    Experimental Definition of a Failure Model for the Tribological Behavior of PTFE Bronze Compounds

    Godor, I., Major, Z., Grün, F. & Vezer, S., 2010, In: Journal of tribology (Transactions of the ASME). p. 807-815

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    Investigation of operating ranges for lubricated large-area contacts using ring-on-disc test configuration

    Grün, F., Godor, I., Gärtner, W. & Eichlseder, W., 2010, 14th Nordic Symposium on Tribology - Abstracts. p. 70-70

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Investigation of tribological damage mechanisms of various slide bearing materials used in medium speed and low speed diesel engines on the microscopic and macroscopic scale

    Offenbecher, M., Gärtner, W., Gumpoldsberger, R., Aufischer, R., Grün, F. & Godor, I., 2010, Proceedings of CIMAC Congress 2010. p. 276/1-276/12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Model scale generation and microscopic characterisation of tribofilms formed on Fe and Cu alloys

    Grün, F., Godor, I., Javidi, A., Pondicherry, K., Offenbecher, M. & Bertram, R., 2010, In: Lubrication science. 22, 6-7, p. 237-250

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Schädigungsäquivalente Prüfmethodik für das Tribosystem Kolbenring-Zylinderlaufbahn von Großmotoren

    Schiffer, J., Godor, I., Grün, F. & Eichlseder, W., 2010, In: Tribologie und Schmierungstechnik. 57, p. 37-42

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Tribological behaviour of unfilled and filled TPU materials

    Godor, I., Schiffer, J., Grün, F., Schwarz, T. & Major, Z., 2010, 14th Nordic Symposium on Tribology - Abstracts. p. 59-59

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    Tribologische Funktionsweise von ungefüllten und gefüllten TPU-Dichtungsmaterialien - ein Erfahrungsbericht

    Godor, I., Schiffer, J., Major, Z., Grün, F. & Schwarz, T., 2010, In: Tribologie und Schmierungstechnik. 57, p. 21-27

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Tribometrie von Grenzschichten in großflächigen Kontakten - Methodik zur Erzeugung von Tribofilmen und begleitende Analytik

    Grün, F., Godor, I., Javidi, A. & Pondicherry, K., 2010, In: Tribologie und Schmierungstechnik. 57, p. 5-11

    Research output: Contribution to journal › Article › Research › peer-review

  106. 2009
  107. Published

    Anwendung einer Prüfmethodik zur tribologischen Untersuchung des Systems Kolbenring-Zylinderlaufbahn von Großmotoren

    Schiffer, J., Godor, I., Grün, F., Krampl, H., Eichlseder, W., Dibiasi, W. & Strobl, V., 2009, Tribologie Fachtagung 2009: Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen. p. 1-12

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  108. Published

    Application of conductive AFM technique to measure electrical conductance of tribofilms

    Pondicherry, K., Beinik, I., Grün, F., Godor, I. & Teichert, C., 2009, Proceedings of 26th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 205-206

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 Next
View graph of relations

Contact

Phone: 1450

Latest Research Output

View more (392)