Florian Grün

101 - 200 out of 392Page size: 100

Research output

  1. 2019
  2. Published

    Influencing factors on the fatigue strength of selectively laser melted structures

    Schneller, W., Leitner, M., Springer, S., Beter, F. & Grün, F., 2019, Procedia Structural Integrity: Fatigue Design 2019, International Conference on Fatigue Design, 8th Edition. Vol. 19. p. 556 - 565 10 p. (Procedia Structural Integrity).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Novel model test configuration for investigation of cam/tappet contacts

    Grün, F., Gódor, I., Summer, F. & Moizan, S., 2019, p. 1-2.

    Research output: Contribution to conference › Abstract › peer-review

  4. Published

    Numerical Fatigue Analysis of Induction-Hardened and Mechanically Post-Treated Steel Components

    Leitner, M., Aigner, R. & Grün, F., 2019, In: Machines : open access journal . 7.2019, 1, 1.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Tribological performance of polymer bearings under stop start operation

    Summer, F., Grün, F., Offenbecher, M. & Taylor, S., 2019, Ecotrib 2019 - Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. 2018
  7. Published

    Lubrication Regime classification of hydrodynamic journal bearings by machine learning using Torque Data

    Moder, J., Bergmann, P. & Grün, F., 14 Dec 2018, In: Lubricants. 6, 4, 108.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    An investigation of fretting behavior of thermoplastic polyurethane for mechanical seal application

    Wang, C., Hausberger, A., Berer, M., Pinter, G., Grün, F. & Schwarz, T., 1 Dec 2018, In: Polymer Testing. 72, p. 271-284 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Application of a √ area -Approach for Fatigue Assessment of Cast Aluminum Alloys at Elevated Temperature

    Aigner, R., Garb, C., Leitner, M., Stoschka, M. & Grün, F., Dec 2018, In: Metals : open access journal . 8, 12

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Relationship between fatigue and tribological performance of Thermoplastic Polyurethanes (TPU)

    Wang, C., Stiller, T., Hausberger, A., Grün, F., Pinter, G. G. & Schwarz, T., 25 Sept 2018, Proceedings of the 3rd International conference on Polymer Tribology.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Fatigue and Fracture Behavior of Induction-Hardened and Superimposed Mechanically Post-treated Steel Surface Layers

    Leitner, M., Grün, F., Tuncali, Z. & Chen, W., Sept 2018, In: Journal of Materials Engineering and Performance. 27, 9, p. 4881-4892

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Evaluation of wear phenomena of journal bearings by close to component testing and application of a numerical wear assessment

    Bergmann, P., Grün, F., Summer, F. & Gódor, I., 26 Jul 2018, In: Lubricants. 2018, 3, 25 p., 65.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Implementation of veriable amplitude tests in lifetime assecessment so short fibre reinforced polymeres

    Primetzhofer, A., Stadler, G., Pinter, G. & Grun, F., 4 Jul 2018, Proceeding of 7th International conference of composite materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Effect of temperature on wear and tribofilm formation in highly loaded DLC-steel line contacts

    Moder, J., Grün, F., Summer, F., Gasperlmair, T. & Andritschky, M., 1 Jul 2018, In: Tribology International. 123, p. 120-129 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Validation of a new high frequency testing technique in the VHCF regime – Fatigue properties of a 42CrMoS4 and X5CrNiCuNb16-4 steel

    Milošević, I., Renhart, P., Winter, G., Grün, F. & Kober, M., 1 Jul 2018, In: International Journal of Fatigue. 112, p. 198-205 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Study of notch effect and fibre orientation on fatigue strength of short glass fibre reinforced polyamide

    Stadler, G., Primetzhofer, A., Pinter, G. G. & Grun, F., 27 Jun 2018.

    Research output: Contribution to conference › Presentation › Research

  17. Published

    Application of modified Kitagawa-Takahashi diagram for fatigue strength assessment of cast Al-Si-Cu alloys

    Garb, C., Leitner, M., Stauder, B., Schnubel, D. & Grün, F., 1 Jun 2018, In: International Journal of Fatigue. 111, p. 256-268 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Fatigue life assessment regarding different influences on the HCF/VHCF behavior of a martensitic steel

    Milosevic, I., Seisenbacher, B., Winter, G., Grün, F. & Kober, M., 25 May 2018, In: MATEC Web of Conferences . 165, p. 20004 1 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    AT516367 (B1) - Prüfstand und Prüfverfahren mit verstellbarem Achsabstand zwischen Übertragungsprüfkörpern

    Grun, F. (Inventor) & Gódor, I. (Inventor), 15 May 2018, IPC No. G01M13/02 (2006.01), Patent No. AT516367(B1), 15 May 2018, Priority date 18 Sept 2014, Priority No. A50659/2014

    Research output: Patent

  20. Published

    Improved Approach to Determine the Material Parameters for a Combined Hardening Model

    Seisenbacher, B., Winter, G. & Grun, F., 16 Apr 2018, In: Materials sciences and applications : MSA.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    A modelling framework for the simulation of lubricated and dry line contacts

    Moder, J., Grün, F. & Gódor, I., 1 Apr 2018, In: Tribology International. 120, p. 34-46 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Application of high performance composite polymers with steel counterparts in dry rolling/sliding contacts

    Moder, J., Grün, F., Summer, F., Kohlhauser, M. & Wohlfahrt, M., 1 Apr 2018, In: Polymer Testing. 66, p. 371-382 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. E-pub ahead of print

    On the modelling of mixed lubrication of conformal contacts

    Bergmann, P., Grun, F., Gódor, I., Stadler, G. & Maier-Kiener, V., 26 Mar 2018, (E-pub ahead of print) In: Tribology International. 125.2018, September, p. 220-236 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    A novel approach for modeling surface effects in hydrodynamic lubrication

    Pusterhofer, M., Bergmann, P., Summer, F., Grün, F. & Brand, C., 12 Mar 2018, In: Lubricants. 6, 1, 27.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Auslegung von Kunststoffbauteilen für den Einsatz im Automobil

    Grun, F. & Primetzhofer, A., 5 Mar 2018, Seminarunterlagen zu Kfz-Symposium 2018. p. 1-29 29 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Experimental determination of highly dynamic forces during wood trunk comminution with a drum chipper

    Pichler, P., Leitner, M., Grun, F. & Guster, C., 11 Jan 2018, In: Journal of Agricultural Engineering. p. 1-16 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Evaluation of wood material models for the numerical assessment of cutting forces in chipping processes

    Pichler, P., Leitner, M., Grün, F. & Guster, C., Jan 2018, In: Wood Science and Technology. 52, 1, p. 281-294 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Effect of Tungsten Carbides on Abrasive Wear of Hardfacing Coatings

    Pichler, P., Leitner, M., Grün, F. & Haßler, J., 2018, In: Advances in tribology. 2018, 4047818.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    In-situ crack propagation measurement of high-strength steels including overload effects

    Simunek, D., Leitner, M. & Grün, F., 2018, In: Procedia Engineering. 213, p. 335-345 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Numerical and analytical studies of a shaker test system for fatigue testing

    Renhart, P., Milosevic, I. & Grun, F., 2018, 34th Danubia Adria Symposium on Advances in Experimental Mechanics, 19 - 22 September 2017, Trieste, Italy. Eberhardsteiner, J., Růžička, M. & Cosmi, F. (eds.). 5 ed. Elsevier Ltd, Vol. 2018. p. 26733-26738 6 p. (Materials Today: Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Short glass fibre reinforced polyamide under low cycle fatigue

    Primetzhofer, A., Stadler, G., Pinter, G. G. & Grün, F., 2018, Proceedings ECCM 18.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Study of notch effect and fibre orientation on fatigue strength of short glass fibre reinforced polyamide

    Primetzhofer, A., Stadler, G., Schneider, C., Pinter, G. G. & Grün, F., 2018, Proceedings ECCM 18.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. 2017
  34. Published

    Damage Equivalent Test Methodologies as Design Elements for Journal Bearing Systems

    Summer, F., Bergmann, P. & Grün, F., 14 Dec 2017, In: Lubricants. 5.2017, 4, 16 p., 47.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Effect of elevated temperature on the fatigue strength of casted AlSi8Cu3 aluminium alloys

    Garb, C., Leitner, M. & Grun, F., 12 Dec 2017, In: Procedia structural integrity / ESIS. 7.2017, p. 497-504 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. E-pub ahead of print

    Effects of Inclusions on the Very High Cycle Fatigue Properties of a High Strength Martensitic Steel within the Transition Area

    Milosevic, I., Garb, C., Winter, G., Grun, F. & Kober, M., 12 Dec 2017, (E-pub ahead of print) In: Procedia Structural Integrity. 7.2017, p. 327-334 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    In-situ crack propagation measurement of high-strength steels including overload effects

    Simunek, D., Leitner, M. & Grun, F., 29 Nov 2017.

    Research output: Contribution to conference › Poster › Research

  38. Published

    CN107366570 (A) - TURBOCHARGER ASSEMBLY

    Hettinger, R. (Inventor), DAGUIN , F. (Inventor), BOILEAU , R. (Inventor), CAPELLI, M. (Inventor), Simon, P. (Inventor), GAINETON, N. (Inventor), BLUMENSCHEIN, E. (Inventor), REICHHART, M. (Inventor), Risch, G. (Inventor), Steinwender, L. (Inventor), Grun, F. (Inventor) & Gódor, I. (Inventor), 21 Nov 2017, IPC No. F01D25/16; F01D25/18; F01D25/24; F02B39/00; F02B39/14, Patent No. CN107366570 (A), Priority date 13 May 2016, Priority No. US201615154673

    Research output: Patent

  39. Published

    US10316742 (B2) - Turbocharger assembly

    Hettinger, R. (Inventor), DAGUIN , F. (Inventor), BOILEAU , R. (Inventor), CAPELLI, M. (Inventor), Simon, P. (Inventor), GAINETON, N. (Inventor), BLUMENSCHEIN, E. (Inventor), REICHHART, M. (Inventor), Risch, G. (Inventor), Steinwender, L. (Inventor), Grün, F. (Inventor) & Gódor, I. (Inventor), 16 Nov 2017, IPC No. F01D25/12; F01D25/16; F01D25/18; F01D25/24; F02B33/40; F02B39/14 , Patent No. US10316742 (B2), Priority date 13 May 2016, Priority No. US201615154673

    Research output: Patent

  40. Published

    US2017328273 (A1) - TURBOCHARGER ASSEMBLY

    Hettinger, R. (Inventor), DAGUIN , F. (Inventor), BOILEAU , R. (Inventor), CAPELLI, M. (Inventor), Simon, P. (Inventor), GAINETON, N. (Inventor), BLUMENSCHEIN, E. (Inventor), REICHHART, M. (Inventor), Risch, G. (Inventor), Steinwender, L. (Inventor), Grun, F. (Inventor) & Gódor, I. (Inventor), 16 Nov 2017, IPC No. F01D25/12; F01D25/16; F01D25/18; F01D25/24; F02B33/40; F02B39/14 , Patent No. US2017328273 (A1), Priority date 16 May 2016, Priority No. US201615154673

    Research output: Patent

  41. Published

    EP3244027 (A1) - TURBOCHARGER ASSEMBLY

    Hettinger, R. (Inventor), DAGUIN , F. (Inventor), BOILEAU , R. (Inventor), CAPELLI, M. (Inventor), Simon, P. (Inventor), GAINETON, N. (Inventor), BLUMENSCHEIN, E. (Inventor), REICHHART, M. (Inventor), Risch, G. (Inventor), Steinwender, L. (Inventor), Grun, F. (Inventor) & Gódor, I. (Inventor), 15 Nov 2017, IPC No. F01D25/16; F01D25/18; F02C6/12, Patent No. EP3244027 (A1), Priority date 13 May 2016, Priority No. EP20170166958

    Research output: Patent

  42. Published

    LEBENSDAUERBERECHNUNG - KONZEPTE FÜR PROZESSABHÄNGIGE MATERIALIEN AM BEISPIEL FASERVERSTÄRKTER KUNSTSTOFFE

    Primetzhofer, A., Stadler, G., Pinter, G. G. & Grün, F., 11 Oct 2017. 16 p.

    Research output: Contribution to conference › Poster › Research

  43. Published

    LEBENSDAUERBERECHNUNG - KONZEPTE FÜR PROZESSABHÄNGIGE MATERIALIEN AM BEISPIEL FASERVERSTÄRKTER KUNSTSTOFFE

    Primetzhofer, A., Stadler, G., Pinter, G. G. & Grün, F., 11 Oct 2017, (R)Evolution des Antriebs - Auswirkungen auf die Betriebsfestigkeit der Bauteile in der Wirkungskette. 44 ed. Berlin, Vol. DVM_Arbeitskreis Betriebsfestigkeit. 16 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Influence of the stress gradient on the fatigue life calculation of a martensitic high strength steel

    Milosevic, I., Winter, G., Grün, F. & Kober, M., 1 Oct 2017, In: Frattura ed Integrità Strutturale . 2017, 42, 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Influence of tribofilm formation in DLC-steel line contacts on friction

    Moder, J., Grun, F., Summer, F., Gasperlmair, T. & Andritschky, M., 5 Sept 2017, p. 63. 1 p.

    Research output: Contribution to conference › Abstract › peer-review

  46. E-pub ahead of print

    Simulation of lamellar cast iron components under TMF-loads

    Strohhäussl, B., Stoschka, M., Winter, G. & Grün, F., 24 Aug 2017, (E-pub ahead of print) In: Materials Today: Proceedings. 4.2017, 5, Part 1, p. 5957-5962 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Expansion of the metrological visualization capability by the implementation of acoustic emission analysis

    Bergmann, P., Grün, F., Summer, F., Gódor, I. & Stadler, G., 1 Aug 2017, In: Advances in tribology. 2017, 17 p., 3718924.

    Research output: Contribution to journal › Article › Research › peer-review

  48. E-pub ahead of print

    A new high frequency testing method for steels under tension/compression loading in the VHCF regime

    Milosevic, I., Renhart, P., Winter, G., Grün, F. & Kober, M., 17 Jul 2017, (E-pub ahead of print) In: International Journal of Fatigue. 104.2017, November, p. 150-157 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Multiaxial fatigue strength assessment of electroslag remelted 50CrMo4 steel crankshafts

    Leitner, M., Tuncali, Z., Steiner, R. & Grün, F., 1 Jul 2017, In: International Journal of Fatigue. 100.2017, July, Part 1, p. 159-175 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Tribology of journal bearings: Start stop operation as life-time factor

    Summer, F., Grün, F., Offenbecher, M., Taylor, S. & Lainé, E., Jul 2017, In: Tribologie und Schmierungstechnik. 64.2017, 4, p. 44-54 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    A Novel Two-Disc Machine for High Precision Friction Assessment

    Moder, J., Grün, F., Stoschka, M. & Gódor, I., 28 Jun 2017, In: Advances in tribology. 2017, 1, 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    NOVEL LEAD FREE BEARING OVERLAY SOLUTIONS WITH LOW FRICTION PERFORMANCE

    Summer, F., Grün, F., Offenbecher, M., Taylor, S. & Lainé, E., 7 Jun 2017, Proceedings of the 6th European COnference on TRIBology. Ljubljana, Slovenia

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. E-pub ahead of print

    Application of √area-concept to assess fatigue strength of AlSi7Cu0.5Mg casted components

    Garb, C., Leitner, M. & Grün, F., 15 Mar 2017, (E-pub ahead of print) In: Engineering Fracture Mechanics. 185.2017, November, p. 61-71 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    A first proposal of a new high frequency testing method for high strength steels under tension / compression loading in the VHCF regime

    Milosevic, I., Winter, G., Grun, F. & Kober, M., 2017, VHCF7 - Seventh International Conference on Very High Cycle Fatigue.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Fretting wear behavior of thermoplastic polyurethane (TPU)

    Wang, C., Hausberger, A., Pinter, G. G., Grun, F. & Schwarz, T., 2017, Proceedings WTC 2017.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  56. Published

    In-situ Testing of Wear and Fatigue on Gear Segments

    Grun, F., Koblmiller, T., Gódor, I. & Schadler, W., 2017, Proceedings of the 6th World Tribology Congress. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Novel Gear Test Methodology to evaluate efficiency and durability

    Grun, F., Maier, B., Gódor, I. & Steinwender, F., 2017, Proceedings of the 6th European COnference on TRIBology. 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Numerical and analytical studies of a shaker test system for fatigue testing

    Renhart, P., Milosevic, I. & Grun, F., 2017, DAS 34 - Proceedings. 3 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    Numerische und analytische Untersuchungen eines Shaker- Prüfsystems zur Ermüdungsprüfung

    Renhart, P., Milosevic, I., Himmelbauer, F. & Grun, F., 2017, Fortschritte in der Werkstoffprüfung für Forschung und Praxis: Prüftechnik - Kennwertermittlung - Schadensvermeidung. p. 91-96 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    Tribologische Kontaktsimulation elastomerer Dichtungswerkstoffe

    Hausberger, A., Krampl, H., Grün, F., Gódor, I., Pinter, G. G. & Schwarz, T., 2017, In: Tribologie und Schmierungstechnik. 64.2017, 1, p. 15-24 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    Untersuchung der lokalen Reibungsmechanismen von Polymer-Glas kontakten mittels in-situ Tribologie

    Stiller, T., Hausberger, A., Wang, C., Pinter, G. G., Gódor, I., Grun, F. & Schwarz, T., 2017, ÖTG 2017 Tagungsband. 2017, p. 55 68 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. 2016
  63. Published

    Journal bearing systems: Effect of lubricant viscosity on frictional losses and lifetime performance

    Summer, F., Grün, F., Godor, I., Offenbecher, M., Lainé, E. & Taylor, S., 23 Nov 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  64. Published

    Journal bearing systems: Effect of lubricant viscosity on frictional losses and lifetime performance

    Summer, F., Grün, F., Godor, I., Offenbecher, M., Lainé, E. & Taylor, S., 23 Nov 2016, Conference proceedings of ÖTG Symposium 2016. p. 127-134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  65. Published

    SIMULATIVE INVESTIGATIONS OF HIGHLY LOADED CONTACTS CONSIDERING SURFACE ROUGHNESS

    Moder, J. & Grün, F., 23 Nov 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  66. Published

    An elastohydrodynamic lubrication model considering surface roughness and mixed friction

    Moder, J., Grün, F. & Godor, I., 13 Oct 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  67. Published

    Herausforderungen und Potentiale bei der Auslegung von kurzfaserverstärkten Spritzgusskomponenten

    Mösenbacher, A. & Grün, F., 11 Oct 2016.

    Research output: Contribution to conference › Presentation › Research

  68. Published

    Laboratory Test Methodologies for Journal Slide Bearing Life Time Assessment

    Bergmann, P., Summer, F. & Grün, F., 22 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  69. Published

    Laboratory Test Methodologies for Journal Slide Bearing Life Time Assessment

    Summer, F., Bergmann, P. & Grün, F., 22 Sept 2016, Proceedings of 33rd Danubia-Adria Symposium. Portoroz, Slowenien, p. 106-107

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Laboratory Test Methodologies for Journal Slide Bearing Life Time Assessment

    Summer, F., Bergmann, P. & Grün, F., 22 Sept 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  71. Published

    Parameter Optimization of a Deformation Model for Grey Cast iron

    Strohhäussl, B., Milosevic, I., Winter, G. & Grün, F., 21 Sept 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  72. Published

    Parameter Optimization of a Deformation Model for Grey Cast iron

    Strohhäussl, B., Winter, G. & Grün, F., 20 Sept 2016, The 33rd Danubia Adria Symposium: Advances in Experimental Mechanics. p. 50-51 2 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Fatigue Strength Assessment of AlSi7Cu0.5Mg T6W Castings Supported by Computed Tomography Microporosity Analysis

    Garb, C., Leitner, M. & Grün, F., 17 Sept 2016, In: Procedia Engineering. 160.2016, p. 53-60 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Fatigue Strength Assessment of AlSi7Cu0.5Mg T6W Castings Supported by Computed Tomography Microporosity Analysis

    Garb, C., Leitner, M. & Grün, F., 5 Sept 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  75. Published

    Reibung und Verschleiß technischer Kunststoffe "Möglichkeiten und Herausforderungen"

    Hausberger, A., Godor, I., Grün, F. & Pinter, G., 1 Sept 2016.

    Research output: Contribution to conference › Presentation › Research

  76. Published

    Thermo-mechanical fatigue influence of copper and silicon on hypo-eutectic Al–Si–Cu and Al–Si–Mg cast alloys used in cylinder heads

    Huter, P., Oberfrank, S., Grün, F. & Stauder, B., Jul 2016, In: International Journal of Fatigue. 88.2016, July, p. 144-155 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Sind mittels laboratorischer Modellprüftechnik erzielte Ergebnisse verwertbar ?

    Grün, F., Godor, I., Moder, J., Bergmann, P. & Summer, F., 11 May 2016, p. 1-43.

    Research output: Contribution to conference › Presentation › Research

  78. Published

    Contact models for mixed friction simulation

    Moder, J. & Grün, F., 21 Apr 2016, MicroCAD: International Multidisciplinary Scientific Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  79. Published

    Methodology development for numerical evaluation of wear in tribological contacts

    Moder, J., Bergmann, P., Grün, F. & Godor, I., 21 Apr 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  80. Published

    Methodology development for numerical evaluation of wear in tribological contacts

    Bergmann, P., Grün, F., Godor, I. & Herbst, K., 21 Apr 2016, The Publications of the MultiScience - XXX. microCAD International Multidisciplinary Scientific Conference University of Miskolc, 21-22 April, 2016. 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  81. Published

    AT516367 (A1) - Prüfstand und Prüfverfahren mit verstellbarem Achsabstand zwischen Übertragungsprüfkörpern

    Grun, F. (Inventor) & Gódor, I. (Inventor), 15 Apr 2016, IPC No. G01M13/02, Patent No. AT516367, 18 Jan 2018, Priority date 18 Sept 2014, Priority No. AT20140050659

    Research output: Patent

  82. Published

    DE102015115719 (A1) - Prüfstand und Prüfverfahren mit verstellbarem Achsabstand zwischen Übertragungsprüfkörpern

    Grun, F. (Inventor) & Gódor, I. (Inventor), 24 Mar 2016, IPC No. G01M13/02, Patent No. DE102015115719 (A1), Priority date 18 Sept 2014, Priority No. AT20140050659

    Research output: Patent

  83. Published

    Reibungsreduktion ins hochbelasteten, geschmierten Kontatken durch Kugelstrahlen

    Moder, J. & Grün, F., 20 Mar 2016, GETLUB 2016: Tribologie- und Schmierstoffkongress. p. 391 403 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    High- and low-cycle fatigue influence of silicon, copper, strontium and iron on hypo-eutectic Al-Si-Cu and Al-Si-Mg cast alloys used in cylinder heads

    Huter, P., Renhart, P., Oberfrank, S., Schwab, M., Grün, F. & Stauder, B., 1 Jan 2016, In: International Journal of Fatigue. 82.2016, January, Part 3, p. 588-601 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Contact models for mixed friction simulation

    Moder, J. & Grün, F., 2016, In: Design of Machines and Structures. 6, 1, p. 48-55 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Contact models for mixed friction simulation

    Moder, J. & Grün, F., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  87. Published

    Experimental evaluation of cutting forces for chipping process and developement of wood material model

    Pichler, P., Leitner, M., Grün, F. & Guster, C., 2016, CD-ROM Proceedings of the World Conference on Timber Engineering: WCTE 2016. Eberhardsteiner, J., Winter, W., Fadai, A. & Pöll, M. (eds.). 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  88. Published

    Experimental evaluation of cutting forces for chipping process and development of wood material model

    Pichler, P., Leitner, M., Grün, F. & Guster, C., 2016, WCTE 2016 - World Conference on Timber Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  89. Published

    Influence of size effect and stress gradient on the high-cycle fatigue strength of a 1.4542 steel

    Milosevic, I., Winter, G., Grun, F. & Kober, M., 2016, In: Procedia Engineering. 160, p. 61-68

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Influence of Size Effect and Stress Gradient on the High-cycle Fatigue Strength of a 1.4542 Steel

    Milosevic, I., Winter, G., Grün, F. & Kober, M., 2016, In: Procedia Engineering. 160, p. 61-68

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Influence of Size Effect and Stress Gradient on the High-cycle Fatigue Strength of a 1.4542 Steel

    Milosevic, I., Winter, G., Grün, F. & Kober, M., 2016, p. 61-68.

    Research output: Contribution to conference › Presentation › Research › peer-review

  92. Published

    Mechanical post-treatment of induction-hardened surface layers to optimize fatigue strength of crankshafts

    Leitner, M., Tuncali, Z., Chen, W. & Grün, F., 2016.

    Research output: Contribution to conference › Presentation › Research

  93. Published

    Methodology development for numerical evaluation of wear in tribological contacts

    Bergmann, P., Grün, F., Godor, I. & Herbst, K., 2016, In: Design of Machines and Structures. 6, 1, p. 5-14 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Modeling Wear of Journal Bearings

    Bergmann, P. & Grün, F., 2016. 6 p.

    Research output: Contribution to conference › Paper

  95. Published

    Modeling Wear of Journal Bearings

    Bergmann, P. & Grün, F., 2016.

    Research output: Contribution to conference › Poster › Research

  96. Published

    Multiaxial fatigue assessment of crankshafts by local stress and critical plane approach

    Leitner, M., Grün, F., Tuncali, Z., Steiner, R. & Chen, W., 2016, In: Frattura ed Integrità Strutturale .

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Multiaxial fatigue assessment of crankshafts by local stress approaches

    Leitner, M., Tuncali, Z., Steiner, R., Chen, W. & Grün, F., 2016.

    Research output: Contribution to conference › Presentation › Research

  98. Published

    Multiaxial fatigue assessment of crankshafts by local stress approaches

    Leitner, M., Tuncali, Z., Steiner, R., Chen, W. & Grün, F., 2016, 11th International Conference on Multiaxial Fatigue & Fracture.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  99. Published

    Reibungsreduktion ins hochbelasteten, geschmierten Kontatken durch Kugelstrahlen

    Moder, J. & Grün, F., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  100. Published

    SIMULATIVE INVESTIGATIONS OF HIGHLY LOADED CONTACTS CONSIDERING SURFACE ROUGHNESS

    Moder, J. & Grün, F., 2016, Tagungsband ÖTG Symposium 2016.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Sind mittels laboratorischer Modellprüftechnik erzielte Ergebnisse verwertbar ?

    Grün, F., Godor, I., Moder, J., Bergmann, P. & Summer, F., 2016, Proceedings des DVM Arbeitskreises Zuverlässigkeit tribologischer Systeme. p. 1-43

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  102. Published

    Validation of Experimental Tests and Simulations of Cutting Forces during Woodworking

    Pichler, P., Leitner, M. & Grün, F., 2016, WCCM XII & APCOM VI. p. 1220 1224 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Validation of Experimental Tests and Simulations of Cutting Forces during Woodworking

    Pichler, P., Leitner, M. & Grün, F., 2016, p. 1220. 1224 p.

    Research output: Contribution to conference › Presentation › Research

  104. Published

    Wear detection by acoustic emissions

    Bergmann, P., Grün, F. & Stadler, G., 2016, Tribologie in Industrie und Forschung: Vortragsunterlagen. Franek, F., Pauschitz, A. & Badisch, E. (eds.). 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 Next
View graph of relations

Contact

Phone: 1450

Latest Research Output

View more (392)