Ewald Fauster

51 - 100 out of 129Page size: 50

Research output

  1. 2018
  2. Published

    Experimental Process Pressure Analysis for Model-Based Manufacturing of Composites by Resin Transfer Moulding

    Fauster, E., Thirunavukkarasu, J., Hergan, P. & Schledjewski, R., 2018, IOP Conference Series: Materials Science and Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Permeability of textile fabrics for fibre-reinforced polymer composites: Experimental methods, data analytics and application

    Fauster, E., 2018

    Research output: Thesis › Habilitation thesis › peer-review

  4. Accepted/In press

    POLYNOMIAL SURFACE MODELLING OF FLOW FRONT DATA FOR IN-PLANE PERMEABILITY CHARACTERIZATION OF TEXTILE FABRICS BY RADIAL FLOW EXPERIMENTS

    Fauster, E., Berg, D. C., May, D., Blößl, Y. & Schledjewski, R., 2018, (Accepted/In press).

    Research output: Contribution to conference › Paper › peer-review

  5. Published

    Quality controlled manufacturing of Hybrid-Metal CRFP Composites by Resin Transfer Moulding

    Fauster, E., Hergan, P. & Schledjewski, R., 2018, Proceedings ICMAC 2018.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. 2017
  7. Published

    Permeability Customisation through Preform Manipulation Utilising 3D-Printing Technology

    Tonejc, M., Pletz, M., Fauster, E. & Schledjewski, R., 1 Nov 2017, In: Polymers and Polymer Composites. 25.2017, 9, p. 651-660 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Permeability Customisation Through Preform Manipulation Utilizing 3D-Printing Technology

    Tonejc, M., Pletz, M., Fauster, E. & Schledjewski, R., 1 Nov 2017, In: Polymers & Polymer Composites (Polymers and polymer composites). 25.2017, 9, p. 643-652 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. E-pub ahead of print

    Influence of process pressures on filling behavior of tubular fabrics in bladder-assisted resin transfer molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 30 Oct 2017, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 3.2017, 4, p. 148-158 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    INFLUENCE OF PROCESSING TEMPERATURES ON THE DEFLECTION OF HYBRID-METAL-CARBON COMPOSITES MADE BY RESIN TRANSFER MOULDING

    Hergan, P., Beter, J., Stelzer, S., Fauster, E. & Schledjewski, R., 25 Aug 2017, Proceedings of the 21st International Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Cascade Injection Procedure for Bladder-assisted Resin Transfer Molding

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 21 Aug 2017. 11 p.

    Research output: Contribution to conference › Paper › peer-review

  12. Published

    HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding

    Fauster, E., Hergan, P., Stelzer, S., Scheiblhofer, S., Cespedes-Gonzales, G., Pfeifer, S., Rittenschober, B., Sieberer, M., Lauermann, M. & Schledjewski, R., 7 Jul 2017.

    Research output: Contribution to conference › Paper › peer-review

  13. Published

    HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding

    Fauster, E., 6 Jul 2017.

    Research output: Contribution to conference › Presentation › Research

  14. Published

    Modell-Basierte FKV-Verarbeitungstechnik an Beispielen der Flüssigimprägnierverfahren

    Fauster, E., Hergan, P., Thirunavukkarasu, J., Vilaca Lourenco, G. & Schledjewski, R., 21 Apr 2017.

    Research output: Contribution to conference › Poster › Research

  15. Published

    Verarbeitung von Verbundwerkstoffen

    Schledjewski, R. & Fauster, E., Apr 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen. Friesenbichler, W. & Berger, G. R. (eds.). Leoben: Eigenverlag, Vol. 7. p. 265-266

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Verarbeitung von Verbundwerkstoffen

    Schledjewski, R. & Fauster, E., Apr 2017.

    Research output: Contribution to conference › Poster › Transfer

  17. Published

    Hybride Verbundwerkstoffe: Potenziale und Herausforderungen

    Hergan, P., Fauster, E., Stelzer, S., Pinter, G. & Schledjewski, R., 24 Mar 2017.

    Research output: Contribution to conference › Abstract › peer-review

  18. Published

    Delamination properties of hybrid steel- carbon composite materials produced via resin transfer molding

    Stelzer, S., Brandstetter, D., Hergan, P., Fauster, E. & Pinter, G. G., 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  19. Published

    In-Plane Permeability Characterization of Reinforcing Fabrics Based on Radial-Flow Experiments: Comparative Studies

    Fauster, E., 2017.

    Research output: Contribution to conference › Presentation › Research

  20. Published

    Modell-Basierte FKV-Verarbeitungstechnik an Beispielen der Flüssigimprägnierverfahren

    Fauster, E., Hergan, P., Thirunavukkarasu, J., Vilaca Lourenco, G. & Schledjewski, R., 2017, Tagungsband zum 26. Leobener Kunststoff-Kolloquium: Innovative Spritzgiesstechnologie - Trends und aktuelle Entwicklungen.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. 2016
  22. Published

    Model based processing as possibility for quality assured manufacturing with ARTM

    Schledjewski, R., Hergan, P. & Fauster, E., 27 Oct 2016.

    Research output: Contribution to conference › Presentation › Research

  23. Published

    ROBUST OPTICAL 2D PERMEABILITY CHARACTERIZATION OF REINFORCING FABRICS

    Fauster, E., 29 Jun 2016.

    Research output: Contribution to conference › Presentation › Research

  24. Published

    ROBUST OPTICAL 2D PERMEABILITY CHARACTERIZATION OF REINFORCING FABRICS

    Fauster, E., Grössing, H., Fellner, K. & Schledjewski, R., 26 Jun 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    An evaluation of the reproducibility of ultrasonic sensor-based out-of-plane permeability measurements: a benchmarking study

    Becker, D., Grössing, H., Konstantopoulos, S., Fauster, E., Mitschang, P. & Schledjewski, R., 1 Jun 2016, In: Advanced Manufacturing: Polymer and Composites Science. 2.2016, 1, p. 34-45 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding

    Fauster, E., 21 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  27. Published

    HybridRTM - Quality Controlled Manufacturing of Hybrid Material Composites through Resin Transfer Moulding

    Fauster, E., Hergan, P. & Schledjewski, R., 20 Apr 2016, Proceedings of Euro Hybrid 2: Materials and Structures 2016. 4 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Automated profile preforming for structural components

    Fauster, E., Schillfahrt, C., Hueber, C. & Schledjewski, R., 19 Apr 2016, In: Science and Engineering of Composite Materials. 24.2016, 5, p. 631-650 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    A model-based concept for an optimized resin transfer moulding process

    Hergan, P., Fauster, E. & Schledjewski, R., 2016, Proceedings of the 17th European Conference on Composite Materials (ECCM17).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. 2015
  31. E-pub ahead of print

    Compaction behavior of continuous carbon fiber tows: an experimental analysis

    Kastanis, D., Steiner, H., Fauster, E. & Schledjewski, R., 12 Nov 2015, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 1.2015, 3, p. 169-174 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Accurate, Reproducible and Robust In-Plane Permeability Characterization with a Low-Budget Test Rig: A Challenge or Straightforward?

    Grössing, H., Fauster, E. & Schledjewski, R., 29 Oct 2015, SAMPE CAMX, Dallas, Tx, USA, 26.-29.10.2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Automatisierte Prozessführung und Qualitätskontrolle in der FKV-Verarbeitung

    Fauster, E., 16 Oct 2015.

    Research output: Contribution to conference › Presentation › Research

  34. Published

    Utilizing Fused Deposition Modeling Techniques in Composite Processing

    Tonejc, M., Grössing, H., Habicher, M., Fauster, E. & Schledjewski, R., 24 Sept 2015, Proceedings Polymer Processing Society Conference.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    A Comparison of Two Measurement Techniques for Determining the 2D Permeability Characteristics of Reinforcing Textiles

    Fauster, E., 23 Jul 2015.

    Research output: Contribution to conference › Presentation › Research

  36. Published

    Optical Permeability Measurement on Tubular Braided Reinforcing Textiles

    Schillfahrt, C., Fauster, E. & Schledjewski, R., Jul 2015, Proceedings of the 20th International Conference on Composite Materials. 12 p. 3406-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Automated Composite Manufacturing by Means of Model Based Process Control

    Schledjewski, R. & Fauster, E., 24 Jun 2015.

    Research output: Contribution to conference › Poster › Research

  38. Published

    Flow Front Advancement during Composite Processing: Predictions from Numerical Filling Simulation Tools in Comparison with Real-World Experiments

    Grössing, H., Fauster, E., Schledjewski, R., Stadlmajer, N. & Fleischmann, M., 5 May 2015, In: Polymer Composites. p. 1-12 DOI 10.1002/pc.23474.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Efficient Manufacturing of Aeronautic CFRP-Structures through Automated Profile Preforming

    Fauster, E., 24 Apr 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  40. Published

    Efficient Manufacturing of Aeronautic CFRP-Structures through Automated Profile Preforming

    Fauster, E., Schillfahrt, C. & Schledjewski, R., 23 Apr 2015.

    Research output: Contribution to conference › Abstract › peer-review

  41. Published

    splineTEX - Industrielle Fertigung von gekrümmten Faserverbundrohren durch Einsatz von Flüssigimprägnierverfahren

    Schillfahrt, C., Fauster, E., Schledjewski, R., Troi, V. & Schennach, O., 6 Mar 2015.

    Research output: Contribution to conference › Paper › peer-review

  42. Published

    Influence of Textile Parameters on the Preform In-Plane Permeability Characteristics of Non-Crimp Fabric Preforms

    Grössing, H., Fauster, E., Schledjewski, R. & Weninger, M., 1 Feb 2015, In: Polymer Composites. p. 1-10 DOI 10.1002/pc.23360.

    Research output: Contribution to journal › Article › Research › peer-review

  43. E-pub ahead of print

    Influence of textile parameters on the in-plane permeability characteristics of non-crimped fabric preforms

    Grössing, H., Fauster, E., Weninger, M. & Schledjewski, R., 23 Jan 2015, (E-pub ahead of print) In: Polymer Composites. 37.2016, 6, p. 1854-1863 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Automated Profile Preforming for Aerospace Applications

    Schillfahrt, C., Fauster, E. & Schledjewski, R., Jan 2015, In: JEC Composites Magazine. 94, p. 43-45 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Accurate, reproducible and robust in-plane permeability characterization with a lowbudget test rig: A challenge or straightforward?

    Grössing, H., Fauster, E. & Schledjewski, R., 2015, p. 267-283. 17 p.

    Research output: Contribution to conference › Paper › peer-review

  46. Published

    A Comparison of two Measurement Techniques for Determining the 2D Permeability Characteristics of Reinforcing Textiles

    Fauster, E., Grössing, H. & Schledjewski, R., 2015, Proceedings of the 20th International Conference of Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    A Study on Geometrical Parameters Influencing the Mechanical Spreading of Fibre Bundles

    Tonejc, M., Steiner, H., Fauster, E., Konstantopoulos, S. & Schledjewski, R., 2015, Proceedings of the 20th International Conference of Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Influence of Test Rig Configuation and Evaluation Algorithms on Optical Radial-Flow Permeability Measurement: A Benchmark Exercise

    Berg, D. C., Fauster, E., Abliz, D., Grössing, H., Meiners, D., Schledjewski, R. & Ziegmann, G., 2015, Proceedings of the 20th International Conference of Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Influence of test rig configuration and evaluation algorithms on optical radial-flow permeability measurement: A benchmark exercise

    Berg, D. C., Fauster, E., Abliz, D., Grössing, H., Meiners, D., Schledjewski, R. & Ziegmann, G., 2015.

    Research output: Contribution to conference › Paper › peer-review

  50. 2014
  51. Published

    Automated Preforming of Profiles for Efficient LCM-Processing of Structural Components in Aeronautic Applications

    Fauster, E., Schillfahrt, C. & Schledjewski, R., 2014, Proceedings of Reinforced Plastics 2014 International BALATON Conference. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Comparison of Algorithms for 2D Anisotropic Permeability Calculation in Terms of Uncertainty Propagation

    Fauster, E., Grössing, H. & Schledjewski, R., 2014, Proceedings of the 16th European Conference on Composite Materials. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Effiziente Verarbeitung von Luftfahrt-Strukturbauteilen durch Einsatz automatisierter Profil-Preformfertigung

    Schillfahrt, C., Fauster, E. & Schledjewski, R., 2014, 23. Leobener Kunststoff-Kolloquium: Hocheffiziente Verbundwerkstoffe. Schledjewski, R. (ed.). Eigenverlag, p. 29-39 10 p. (Schriftenreihe Kunststofftechnik Leoben; vol. 4).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Ganzheitliche Prozessentwicklung im Bereich der Legetechnik

    Tonejc, M., Pazour, P., Fauster, E. & Schledjewski, R., 2014, Schriftenreihe Kunststofftechnik Leoben. p. 17-27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Monitoring the production of FRP composites: A review of in-line sensing methods

    Konstantopoulos, S., Fauster, E. & Schledjewski, R., 2014, In: Express Polymer Letters. 8, p. 823-840

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 Next
View graph of relations

Contact

Phone: 2708

Latest Research Output

View more (129)