Clemens Holzer

81 - 100 out of 376Page size: 20

Research output

  1. 2019
  2. Published

    Aktuelle Entwicklungen in der Simulation des Pulverspritzgießprozesses

    Lucyshyn, T., Hubmann, M., Duretek, I. & Holzer, C., 25 Apr 2019, Simulation in der Kunststofftechnik. Schuecker, C. (ed.). Leoben, Vol. Band 9. p. 101-103 3 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Rheological behaviour of highly-filled polymers for Metal Injection Moulding

    Kukla, C., Slemenik Perše, L., Bek, M., Gonzalez-Gutierrez, J. & Holzer, C., 9 Apr 2019. 1 p.

    Research output: Contribution to conference › Poster › Research

  4. Published

    Rheological behaviour of highly-filled polymers for Metal Injection Moulding

    Bek, M., Gonzalez-Gutierrez, J., Slemenik Perše, L., Holzer, C. & Kukla, C., 8 Apr 2019, p. 117-117. 1 p.

    Research output: Contribution to conference › Abstract

  5. Published

    Tensile properties of sintered 17-4PH stainless steel fabricated by material extrusion additive manufacturing

    Gonzalez-Gutierrez, J., Arbeiter, F., Schlauf, T., Kukla, C. & Holzer, C., 8 Apr 2019, In: Materials letters. 248.2019, 1 August, p. 165-168 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Additive manufacturing of zirconia parts by fused filament fabrication and solvent debinding: Selection of binder formulation

    Cano Cano, S., Gonzalez-Gutierrez, J., Sapkota, J., Spörk, M., Arbeiter, F., Schuschnigg, S., Holzer, C. & Kukla, C., 1 Mar 2019, In: Additive Manufacturing. 26.2019, March, p. 117–128 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Crosslinked polyolefins using a modified filler

    Kaltenegger-Uray, A., Rieß, G., Lucyshyn, T., Holzer, C. & Kern, W., 6 Feb 2019, In: AIP Conference Proceedings. 2019, 2065, 5 p., 030051.

    Research output: Contribution to journal › Article › Research › peer-review

  8. 2018
  9. Published

    Additive Fertigung von metallischen und keramischen Produkten mittels Filamentextrusion

    Holzer, C., 23 Oct 2018, p. 72-75. 4 p.

    Research output: Contribution to conference › Paper › peer-review

  10. Published

    Design and fabrication of monolithic catalyst for plasma-catalytic oxidation of toluene

    Huang, L., Zheng, M., Jiang, W., Shi, L., Gonzalez-Gutierrez, J. & Holzer, C., 20 Oct 2018. 1 p.

    Research output: Contribution to conference › Abstract

  11. Published

    Rheology of Highly Filled Polymers

    Kukla, C., Duretek, I., Gonzalez-Gutierrez, J. & Holzer, C., 3 Oct 2018, Polymer Rheology. Rivera-Armenta, J. L. & Salazar-Cruz, B. A. (eds.). London, United Kingdom, p. 153- 173 21 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  12. Published

    The consequences of different printing chamber temperatures in extrusion-based additive manufacturing

    Spörk, M., Arbeiter, F., Raguz, I., Traxler, G., Schuschnigg, S., Cardon, L. & Holzer, C., 21 Sept 2018.

    Research output: Contribution to conference › Paper › peer-review

  13. Published

    Influence of filler types onto the viscosity of highly filled polymers.

    Kukla, C., Slemenik Perše, L., Bek, M., Gonzalez-Gutierrez, J. & Holzer, C., 19 Sept 2018, International Conference on Polymers and Moulds Innovations: Conference Proceedings. Pontes, A. (ed.). Guimaraes, Portugal, Vol. 8. 6 p. P120

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Anisotropic properties of oriented short carbon fibre filled polypropylene parts fabricated by extrusion-based additive manufacturing

    Spoerk, M., Savandaiah, C., Arbeiter, F., Traxler, G., Cardon, L., Holzer, C. & Sapkota, J., 11 Jun 2018, In: Composites Part A: Applied Science and Manufacturing. 113.2018, October, p. 95-104 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Adhesion of standard filament materials to different build platforms in material extrusion additive manufacturing

    Schuschnigg, S., Gonzalez-Gutierrez, J., Spörk, M., Sapkota, J. & Holzer, C., 21 May 2018, 34 th International Conference of the Polymer Processing society. Liu, S.-J. (ed.). Taipei, Taiwan, Vol. 34. 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives

    Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Kukla, C., Sapkota, J. & Holzer, C., 18 May 2018, In: Materials. 11.2018, 5, 36 p., 840.

    Research output: Contribution to journal › Literature review › peer-review

  17. Published

    Polypropylene Filled With Glass Spheres in Extrusion‐Based Additive Manufacturing: Effect of Filler Size and Printing Chamber Temperature

    Spörk, M., Arbeiter, F., Raguž, I., Weingrill, G., Fischinger, T., Traxler, G., Schuschnigg, S., Cardon, L. & Holzer, C., 16 May 2018, In: Macromolecular materials and engineering. 303.2018, 7, 15 p., 1800179.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Optimisation of the Adhesion of Polypropylene-Based Materials during Extrusion-Based Additive Manufacturing

    Spörk, M., Gonzalez-Gutierrez, J., Lichal, C., Cajner, H., Berger, G., Schuschnigg, S., Cardon, L. & Holzer, C., 2 May 2018, In: Polymers. 10.2018, 5, 16 p., 490.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Cranial polyetheretherketone implants by extrusion–based additive manufacturing: state of the art and prospects

    Katschnig, M. & Holzer, C., 1 May 2018, In: Material Science & Engineering International Journal. 2.2018, 3, p. 66-68 3 p.

    Research output: Contribution to journal › Review article › peer-review

  20. Published

    Influence of filler treatment on the behavior of blast furnace slag filled polypropylene compounds

    Mostafa, A., Lucyshyn, T., Holzer, C., Flachberger, H., Öfner, W., Rieß, G. & Fritz, B., 23 Apr 2018, In: Journal of Applied Polymer Science. 135.2018, 31, p. 1-9 9 p., 46535.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Entwicklungen im Bereich Fused Filament Fabrication

    Schuschnigg, S., Spörk, M. & Holzer, C., 19 Apr 2018, 27. Leobener Kunststoff-Kolloquium: Print & Coat- Polymere in Druck- und Beschichtungstechnologien. Kern, W. (ed.). Leoben: Eigenverlag, Vol. 27. p. 19-34

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Feedstocks for the Shaping-Debinding-Sintering Process of Multi Material Components

    Cano Cano, S., Kukla, C., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 19 Apr 2018, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

Previous 1 2 3 4 5 6 7 8 ...19 Next
View graph of relations

Contact

Phone: 3500

Latest Research Output

View more (376)