Christian Kukla

(Former)

21 - 40 out of 119Page size: 20

Research output

  1. 2022
  2. Published

    Metal fused filament fabrication of the nickel-base superalloy IN 718

    Thompson, Y., Zissel, K., Förner, A., Gonzalez-Gutierrez, J., Kukla, C., Neumeier, S. & Felfer, P., 3 Feb 2022, In: Journal of materials science. 57.2022, June, p. 9541-9555 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Filamentbasierter 3D-Druck für Metalle, Hartmetalle und Cermets

    Kukla, C., Duretek, I. & Lengauer, W., 2022, Pulvermetallurgie in Wissenschaft und Praxis: Pulvermetallurgie - vielfältige Prozesse und Werkstoffe. Broeckmann, C., Danninger, H. & Kaletsch, A. (eds.). Vol. 37. p. 75-103

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. 2021
  5. Published

    Effect of metal particle size and powder volume fraction on the filling performance of powder injection moulded parts with a microtextured surface

    Ammosova, L., Cano Cano, S., Schuschnigg, S., Kukla, C., Mönkkönen, K., Suvanto, M. & Gonzalez-Gutierrez, J., Nov 2021, In: Precision Engineering. 72.2021, November, p. 604-612 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Material extrusion additive manufacturing of multi-material components

    Cano Cano, S., Valy, L., Liu, D., Maurer, P., Ma, N., Czernilofsky, F., Schuschnigg, S., Sui, G., Kitzmantel, M., Kukla, C. & Gonzalez-Gutierrez, J., 15 Sept 2021, 29th Leoben-Conference on Polymer Engineering & Science. p. 184 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Fused Filament Fabrication-Based Additive Manufacturing of Commercially Pure Titanium

    Thompson, Y., Polzer, M., Gonzalez-Gutierrez, J., Kasian, O., Heckl, J. P., Dalbauer, V., Kukla, C. & Felfer, P., 12 Sept 2021, In: Advanced Engineering Materials. 23.2021, 12, 12 p., 2100380.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Bending Properties of Lightweight Copper Specimens with Different Infill Patterns Produced by Material Extrusion Additive Manufacturing, Solvent Debinding and Sintering

    Gonzalez-Gutierrez, J., Cano Cano, S., Ecker, J. V., Kitzmantel, M., Arbeiter, F., Kukla, C. & Holzer, C., 6 Aug 2021, In: Applied Sciences : open access journal. 11, 16, 7262.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Powder content in powder extrusion moulding of tool steel: Dimensional stability, shrinkage and hardness

    Gonzalez-Gutierrez, J., Thompson, Y., Handl, D., Cano Cano, S., Schuschnigg, S., Felfer, P., Kukla, C., Holzer, C. & Burkhardt, C., 15 Jan 2021, In: Materials letters. 283, January 2021, 5 p., 128909.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Effect of backbone selection on the solvent debinding of metal injection moulding feedstocks

    Kukla, C., Cano, S., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 2021, Euro PM2021 Congress Proceedings. (Euro PM2021 Congress Proceedings).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. 2020
  12. Published

    Rheological Behaviour of Highly Filled Materials for Injection Moulding and Additive Manufacturing: Effect of Particle Material and Loading

    Bek, M., Gonzalez-Gutierrez, J., Kukla, C., Pušnik Crešnar, K., Maroh, B. & Slemenik Perše, L., 2 Nov 2020, In: Applied Sciences : open access journal. 10, 22, p. 1-23 23 p., 7993.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Factors Affecting the Properties of POM-based Feedstocks for Fused Filament Fabrication/FFF

    Kukla, C., Hentschel, L., Cano Cano, S., Kitzmantel, M., Holzer, C. & Gonzalez-Gutierrez, J., 5 Oct 2020. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  14. Published

    Additive Fertigung metallischer und keramischer Bauteile: Einsatz der Materialextrusion insbesondere der Verwendung von Filamenten für Sinterverfahren

    Kukla, C., Schuschnigg, S. & Holzer, C., Aug 2020, In: Industrie 4.0 Management. 36.2020, 4, p. 20-24 5 p.

    Research output: Contribution to journal › Article › Research

  15. Published

    Influence of the Infill Orientation on the Properties of Zirconia Parts Produced by Fused Filament Fabrication

    Cano Cano, S., Lube, T., Huber, P., Gallego, A., Naranjo, J. A., Berges, C., Schuschnigg, S., Herranz, G., Kukla, C., Holzer, C. & Gonzalez-Gutierrez, J., 15 Jul 2020, In: Materials. 13.2020, 14, 19 p., 3158.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Modification of Interfacial Interactions in Ceramic-Polymer Nanocomposites by Grafting: Morphology and Properties for Powder Injection Molding and Additive Manufacturing

    Cano Cano, S., Gooneie, A., Kukla, C., Rieß, G., Holzer, C. & Gonzalez-Gutierrez, J., 21 Feb 2020, In: Applied Sciences : open access journal. 10.2020, 4, 18 p., 1471.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Production of multimaterial components by material extrusion - Fused filament fabrication (ME-FFF)

    Kukla, C., Cano, S., Moritz, T., Müller-Köhn, A., Günther, A., Hampel, S. & Holzer, C., 2020, Euro PM 2018 Congress and Exhibition. (Euro PM 2018 Congress and Exhibition).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. 2019
  19. Published

    Influence of stearic acid in feedstocks for FFF and PIM

    Kukla, C., Cano Cano, S., Holzer, C. & Gonzalez-Gutierrez, J., 16 Oct 2019.

    Research output: Contribution to conference › Paper › peer-review

  20. Published

    Der Filamentdruck als Verfahren zur Herstellung von metallischen Komponenten

    Kukla, C. & Maurath, J., Oct 2019, In: Galvanotechnik : älteste Fachzeitschrift für die Praxis der Oberflächentechnik. 110.2019, 10, p. 1856-1861 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Steel parts produced by material extrusion additive manufacturing, solvent debinding and sintering

    Gonzalez-Gutierrez, J., Thompson, Y., Cano Cano, S., Felfer, P., Kukla, C. & Holzer, C., 30 Sept 2019, Materials Science and Technology 2019 Conference Proceedings. p. 264-266 3 p. 139-137130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Fused filament fabrication, debinding and sintering as a low cost additive manufacturing method of 316L stainless steel

    Thompson, Y., Gonzalez-Gutierrez, J., Kukla, C. & Felfer, P., 9 Sept 2019, In: Additive Manufacturing. 30.2019, December, 8 p., 100861.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Fabrication and properties of extrusion-based 3D-printed hardmetal and cermet components

    Lengauer, W., Duretek, I., Fürst, M., Schwarz, V., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C., Kitzmantel, M., Neubauer, E., Lieberwirth, C. & Morrison, V., 1 Aug 2019, In: International Journal of Refractory Metals and Hard Materials. 82.2019, August, p. 141-149 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Fused Filament Fabrication of Metals and Ceramics for Special Applications

    Cano Cano, S., Holzer, C., Gonzalez-Gutierrez, J., Kukla, C. & Schuschnigg, S., 1 Aug 2019, 9 ed. Leykam Buchverlag. 15 p. (Industrial Management; no. 9)

    Research output: Book/Report › Anthology › Research

Previous 1 2 3 4 5 6 Next
View graph of relations

Latest Research Output

View more (119)