Bruno Buchmayr

(Former)

151 - 200 out of 255Page size: 50

Research output

  1. 2009
  2. Published

    Development and Validation of a Finite-Element Model for Radial Forging

    Wallner, S., Harrer, O.-K., Hatzenbichler, T. & Buchmayr, B., 2009, X International Conference on Computational Plasticity (Complas), Barcelona/Spain, (Tagungsband auf CD). p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Effect of different contact formulations used in commercial FEM-Software Packages on the results of hot forging simulations

    Hatzenbichler, T., Harrer, O.-K., Buchmayr, B. & Planitzer, F., 2009,

    Hot forming of Steels & Product Properties

    .     p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Einflüsse auf die Umformbarkeit von Aerosolspraydosen

    Taschauer, M. & Buchmayr, B., 2009, Einflüsse auf die Umformbarkeit von Aerosolspraydosen. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 125-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    FEM - Simulation of Long Term Die Heating during High - Frequency Incremental Hot Forging Processes

    Hatzenbichler, T., Wallner, S., Buchmayr, B., Prevedel, P. & Caliskanoglu, D., 2009,

    Material Science & Technology (MS&T 2009)

    .     p. 2247-2257

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    FEM study on the penetration of projectiles into steel sheets

    Hatzenbichler, T. & Buchmayr, B., 2009, In: International journal of material forming. Vol.2, p. 789-792

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    FEM Study on the Penetration of Projectiles into steel sheets

    Hatzenbichler, T. & Buchmayr, B., 2009, FEM Study on the Penetration of Projectiles into steel sheets. AIP Press, p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    FEM-Supported Development of a Radial Forging Process for Surface Densification of P/M Gears

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2009, FEM-Supported Development of a Radial Forging Process for Surface Densification of P/M Gears. AIP Press, p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    FEM-Supported Development of a Radial Forging Process for Surface Densification of P/M Gears

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2009, In: International journal of material forming. 2, p. 93-96

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Form vollendet

    Buchmayr, B., 2009, In: Kleine Zeitung / Steiermark - Leoben und rund um den Erzberg. p. 23-23

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Herstellung von Stahl-Aluminium-Werkstoffverbunden durch Walzplattieren

    Lehofer, H. & Buchmayr, B., 2009, 4. Landshuter Leichtbau-Colloquium (26.-27.2.2009, Hochschule Landshut). LC-Verl., p. 187-193

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Improving the dynamic and stability behavior of plates by laser treatment

    Bilik, C., Rammerstorfer, F. G., Daxner, T., Figala, G. & Buchmayr, B., 2009, 6th ICCSM Int. Congress of Croatian Society of Mechanics Dubrovinik.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Investigation of a Cogging Process for Surface Densification of PM Gears by FEM Simulation

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2009,

    Proceedings of the MPIF/APMI International Conference on Powder Metallurgy & Particulate Materials

    .     p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Investigation of the material flow of a warm formed profile

    Harrer, O.-K., Wallner, S. & Buchmayr, B., 2009,

    Hot forming of Steels & Product Properties

    .     p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Kaltumformung - eine systemanalytische Betrachtung

    Buchmayr, B., 2009, Kaltumformung - eine systemanalytische Betrachtung. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 5-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Microstructural aspects and recrystallization behaviour of the direkt rolling of steel using laborytory simulation

    Gelder, S. & Buchmayr, B., 2009,

    Hot forming of Steels & Product Properties

    .     p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Optische Messungen zur Ermittlung der Eigenspannungen an Kaltbändern

    Forstner, K. & Buchmayr, B., 2009, Optische Messungen zur Ermittlung der Eigenspannungen an Kaltbändern. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 119-124

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Physikalische Simulation der Gefügeentwicklung im Zuge des Direkteinsatzes

    Gelder, S., Buchmayr, B., Stöckl, C., Linzer, B. & Hohenbichler, G., 2009, Physikalische Simulation der Gefügeentwicklung im Zuge des Direkteinsatzes. p. 91-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Radialschmieden im Einstechverfahren

    Wallner, S., Harrer, O.-K. & Buchmayr, B., 2009, Radialschmieden im Einstechverfahren. p. 19-28

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Recrystallization and grain growth in the nickel-based superalloy Allvac 718Plus / Dedicated to Professor Dr. Franz Jeglitsch on the occasion of his 75th birthday

    Sommitsch, C., Huber, D., Ingelman-Sundberg, F., Mitsche, S., Stockinger, M. & Buchmayr, B., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 1088-1098

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Reduction of Porosity in PM Components by Metal Forming Technologies

    Hatzenbichler, T., Buchmayr, B. & Planitzer, F., 2009, COMET MPPE Workshop Damage, Materials Center Leoben. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Simulation des Kopfstauchens unter Berücksichtigung des Vorzuges

    Hatzenbichler, T. & Buchmayr, B., 2009, Simulation des Kopfstauchens unter Berücksichtigung des Vorzuges. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 73-79

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Umformtechnischer Leichtbau

    Buchmayr, B., 2009, Leichtbau Prinzipien, Werkstoffauswahl und Fertigungsvarianten. p. 214-246

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  24. Published

    Werkstoffe für die Energietechnik - Anforderungen, Anwendungen und Entwicklungspotenziale

    Buchmayr, B., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 5, p. 181-188

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    XXVIII. Verformungskundliches Kolloquium

    Buchmayr, B. (Editor) & Harrer, O.-K. (Editor), 2009, Leoben, Österreich: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  26. 2008
  27. Published

    Characterisation of different lubricants concerning the friciton coefficient in forging of AA2618

    Buchner, B., Maderthoner, G. & Buchmayr, B., 2008, In: Journal of materials processing technology. 198, p. 41-47

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Comparison of Yield Functions for Compressible PM-Materials

    Wallner, S., Hatzenbichler, T. & Buchmayr, B., 2008, XXVII. Verformungskundliche Kolloquium, 8.-11.3.2008, Planneralm/Donnersbach. Lehrstuhl für Umformtechnik. Bruno Buchmayr, p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Comparison of yield functions for pm-materials

    Wallner, S., Hatzenbichler, T. & Buchmayr, B., 2008, Metform Conference 2008. p. 473-478

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Gekoppelte Umform- und Gefügesimulation beim Radial- und Gesenkschmieden

    Harrer, O.-K., Sommitsch, C. & Buchmayr, B., 2008, MEFORM 2008, Simulation von Umformprozessen. Inst. für Metallformung, p. 18-27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Implementieren von Fließbedingungen in DEFORM 3DTM zur FEM Simulation der Verdichtung von PM-Werkstoffen

    Wallner, S., Hatzenbichler, T. & Buchmayr, B., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 435-438

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Investigation of different parameters on roll bonding quality of aluminium and steel sheets

    Buchner, M., Buchner, B., Buchmayr, B., Kilian, H. & Riemelmoser, F., 2008, 11th ESAFORM Conference on Material Forming.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Investigation of different parameters on roll bonding quality of aluminium and steel sheets

    Buchner, M., Buchner, B., Buchmayr, B., Kilian, H. & Riemelmoser, F., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  34. Published

    Investigation of different parameters on roll bonding quality of aluminium and steel sheets

    Buchner, M., Buchner, B., Buchmayr, B., Kilian, H. & Riemelmoser, F., 2008, In: International journal of material forming. 1, p. 1279-1282

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Investigation of friction in warm forging of AA6082

    Buchner, B., Weber, A. & Buchmayr, B., 2008, 11th ESAFORM Conference on Material Forming. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Investigation of friction in warm forging of AA6082

    Buchner, B., Weber, A. & Buchmayr, B., 2008, In: International journal of material forming. 1, p. 1215-1218

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Kriterien zur Auswahl von Fertigungsverfahren

    Buchmayr, B., 2008, 1. Workshop "Wirtschaftliche Fertigung". p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Microstructure modeling of the dynamic recrystallization kinetics during turbine disc forging of the nickel based superalloy Allvac 718PlusTM

    Huber, D., Stotter, C., Sommitsch, C., Mitsche, S., Poelt, P., Buchmayr, B. & Stockinger, M., 2008, Superalloys 2008, Roger C. Reed et al. Eds., TMS. p. 855-861

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Microstructure modeling of the dynamic recrystallization kinetics during turbine disc forging of the nickel based superalloy Allvac 718PlusTM

    Huber, D., Stotter, C., Sommitsch, C., Mitsche, S., Poelt, P. & Buchmayr, B., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  40. Published

    Mikrostrukturentwicklung und duktile Schädigung beim Gesenkschmieden

    Sommitsch, C., Harrer, O.-K., Rüf, G. & Buchmayr, B., 2008, Der Pawelski - Umformtechnik im Spannungsfeld zwischen Plastomechanik und Werkstofftechnik. p. 113-123

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  41. Published

    Oberflächenverdichten von P/M-Zahnrädern durch Radialschmieden

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 430-434

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Vergleichende Untersuchungen zum Eindring- und Durchziehverhalten von Feinblechen

    Buchmayr, B., Hatzenbichler, T. & Kessler, F., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 443-449

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Vorformoptimierung für das Gesenkschmieden mittels numerischer Simulation

    Hatzenbichler, T. & Buchmayr, B., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 413-417

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Werkstoff- und verfahrenstechnische Optimierung bei der Herstellung hochfester Schrauben

    Buchmayr, B., Hatzenbichler, T., Kienreich, R. & Beyer, S., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 423-429

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    XXVII. Verformungskundlichen Kolloquium

    Buchmayr, B. (Editor) & Harrer, O.-K. (Editor), 2008, Leoben, Österreich: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  46. 2007
  47. Published

    A numerical sensitivity study to determine the main influence parameters on the back-end defect

    Buchmayr, B., Hatzenbichler, T. & Umgeher, A., 2007, In: Journal of materials processing technology. 182, p. 73-78

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    A Practical Approach to Preform Design for Different Materials

    Harrer, O.-K., Sommitsch, C., Rüf, G. & Buchmayr, B., 2007, ESAFORM Conference on Material Forming. AIP Press, p. 15-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Charakterisierung unterschiedlicher Schmierstoffe hinsichtlich des Reibzahlverlaufes beim Schmieden von Aluminiumlegierungen

    Buchner, B., Maderthoner, G. & Buchmayr, B., 2007, XXVI. Verformungskundliches Kolloquium. p. 255-265

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  50. Published

    Coupled Physical and Numerical Simulation to Optimize Thermo-mechanical Metal Forming Processes

    Sommitsch, C. & Buchmayr, B., 2007, In: Steel research international. 78, p. 740-744

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Development of aluminium-clad steel sheet by roll-bonding for the automotive industry

    Buchner, M., Buchmayr, B., Bichler, C. & Riemelmoser, F., 2007, 10th International ESAFORM Conference on Material Forming. p. 264-268

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Einfluss reduzierter Schmiedetemperaturen auf die Eigenschaften von AFP-Stählen

    Buchmayr, B. & Lehofer, H., 2007, Workshop "Moderne thermomechanische Prozessstrategien in der Stahlumformung". p. 53-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Estimation of friction under forging conditions by means of the ring-on-disc test

    Buchner, B., Umgeher, A. & Buchmayr, B., 2007, 10th ESAFORM Conference on Material Forming. AIP Press, p. 505-508

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 6 Next
View graph of relations

Latest Research Output

View more (255)