Bruno Buchmayr

(Former)

101 - 200 out of 255Page size: 100

Research output

  1. 2013
  2. Published

    Systematische Prozessbetrachtung von Flow Forming

    Kuss, M. & Buchmayr, B., 2013, Systematische Prozessbetrachtung von Flow Forming. p. 131-136

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Triaxial Residual Stresses in Thermomechanically Rolled Seamless Tubes characterized by High-Energy Synchrotron X-Ray diffraction

    Winter, G., Stefenelli, M., Klarner, J., Staron, P., Fischer, T., Keckes, J. & Buchmayr, B., 2013,

    Proceedings of the2013 ASME Pressure Vessels & Piping Conference

    .     p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    XXXII. Verformungskundliches Kolloquium 2013

    Buchmayr, B. (Editor) & Harrer, O.-K. (Editor), 2013, Leoben, Österreich: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  5. 2012
  6. Published

    3D Finite Element Simulation of Cold Pilgering over the Whole Productive Time

    Strickner, G., Ragger, K., Hatzenbichler, T. & Buchmayr, B., 2012, Proceedings of the14th International Conference on Metal Forming 2012. p. 71-74

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    5.Analyse des Axial-Radial-Umformens mittels Finite-Elemente-Methode

    Kuss, M., Wallner, S., Harrer, O.-K. & Buchmayr, B., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. p. 181-186

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    A new Concept to Design Drawing Tools with Respect to Central Demage

    Kaiser, R., Hatzenbichler, T. & Buchmayr, B., 2012, Proceedings of the14th International Conference on Metal Forming 2012. p. 1387-1390

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Characterisierung des Umform- und Umwandlungsverhaltens des Dualphasenstrahles 10MnSi7 für die Massivumformung

    Buchmayr, B. & Schiller, W., 2012, MEFORM 2012. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Deviation of the results obtained from different commercial finite element solvers due to friction formulation

    Hatzenbichler, T., Harrer, O.-K., Wallner, S., Planitzer, F., Kuss, M., Pschera, R. & Buchmayr, B., 2012, In: Tribology International. 49, p. 75-79

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    FEM-Analyse des Axial-Radial-Umformens als Verfahrenserweiterung des Radialschmiedens

    Kuss, M., Wallner, S., Harrer, O.-K. & Buchmayr, B., 2012, XXXI. Verformungskundliches Kolloquium. p. 29-33

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    FEM-Analyse des Axial-Radial-Umformens als Verfahrenserweiterung des Radialschmiedens

    Kuss, M., Wallner, S. & Buchmayr, B., 2012, Simulation in der Umformtechnik. p. 228-245

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Lightweight design by radial forged gear box components

    Hofer, F., Kuss, M., Wallner, S., Buchmayr, B. & Harrer, O.-K., 2012, Getriebe in Fahrzeugen. p. 309-319

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Maßnahmen zur Reparatur und Lebensdauererhöhung von Schmiedewerkzeugen

    Yilkiran, T., Behrens, B.-A. & Buchmayr, B., 2012, In: Schmiede-Journal. 2012, März, p. 52-57

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Optimierte Herstellungs- und Wärmebehandlungsparameter walzplattierter Magnesium(AZ31)-Aluminium(1050)-Verbundwerkstoffe

    Schlögl, C. M., Harrer, O.-K. & Buchmayr, B., 2012, In: Berg- und hüttenmännische Monatshefte : BHM. 157, p. 313-318

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Prediction of Residual Stresses during the Heat Treatment of large Forgings

    Taschauer, M., Pschera, R., Wieser, V., Schramhauser, S. & Buchmayr, B., 2012, ICRF 2012 Proceedings. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Simulation of the roller straightening process with respect to residual stresses and the curvature trend

    Kaiser, R., Hatzenbichler, T., Buchmayr, B. & Antretter, T., 2012.

    Research output: Contribution to conference › Poster › Research › peer-review

  18. Published

    The Characterization of the wear behaviour of different die materials and coatings for forging dies using a rotational tribometer

    Mazlum, E. & Buchmayr, B., 2012, Proceedings of the 9th International Tooling Conference. p. 417-424

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Thermo-Mechanical Behaviour of Dual-Phase Steels in Various Structural Morphologies: Experiments and Modelling

    Buchmayr, B. & Antretter, T., 2012, THERMEC 2011 : International Conference on Processing and Fabrication of Advanced Materials ; processing, fabrication, properties, applications ; August 1 - 5, 2011, Quebec City, Canada . p. 2072-2077 (Materials science forum; vol. 706-709).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    XXXI. Verformungskundliches Kolloquium

    Buchmayr, B. (Editor) & Harrer, O.-K. (Editor), 2012, Leoben, Österreich: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  21. 2011
  22. Published

    A simulation strategy to compute long-term die heating during radial forging

    Hatzenbichler, T., Wallner, S., Buchmayr, B., Prevedel, P. & Caliskanoglu, D., 2011, In: Steel grips : journal of steel and related materials. p. 57-61

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Comutational Modeling of Laser Treatment of Plates for Increased Buckling Loads and Natural Frequencies

    Bilik, C., Rammerstorfer, F. G., Figala, G. & Buchmayr, B., 2011, In: Proceedings of the Institution of Mechanical Engineers / C (Part C, Journal of mechanical engineering science). 225, p. 2385-2398

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Erstellung eines numerischen Simulationsmodells am Beispiel des Walzens von Rippenplatten UIC60-0

    Harrer, O.-K., Buchmayr, B., Hatzenbichler, T. & Riedl, A., 2011, In: Kalibreur. 72, p. 69-71

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Herstellung und Umformbarkeit walzplattierter Magnesium(AZ31)-Aluminium(1050)-Verbunde

    Schlögl, C., Planitzer, C., Harrer, O.-K. & Buchmayr, B., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. 156, p. 136-141

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Metallurgical and Mechanical Analyses of Dissimilar Friction Weldments of Ferrous and Non-Ferrous Metals for Lightweight Components

    Figala, G., Taschauer, M., Wallner, S. & Buchmayr, B., 2011, Esaform Conference 2011. p. 1272-1277

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Optimierung des Herstellprozesses der neuen LaserSealed™ Fülldrähte von Böhler Schweißtechnik

    Böck, B., Buchmayr, B., Sitte, W., Egger, A. & Posch, G., 2011, XXX. Verformungskundliches Kolloquium. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Physical simulation of the hot direct rolling of steel

    Gelder, S., Buchmayr, B., Linzer, B. & Hohenbichler, G., 2011, In: Steel research international. p. 1213-1219

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Practiacal Inverse Analysis in Metal Forming

    Pschera, R. & Buchmayr, B., 2011, Computer Methods in Materials Science. p. 436-441

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Reproduce diameter reduction process of a powder filled tube in finite element analysis

    Böck, B., Buchmayr, B., Wallner, S. & Posch, G., 2011, Computational Plasticity XI Fundamentals and Applications. p. 1134-1141

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    ToughTubes - extrem feinkörnige nahtlose Stahlrohre

    Klarner, J., Buchmayr, B. & Rainer, W., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. p. 168-174

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Workshop Schmiedewerkzeuge

    Buchmayr, B. (Editor), 2011, Leoben: Montanuniversität Leoben, Lehrstuhl für Umformtechnik.

    Research output: Book/Report › Anthology › Research

  33. Published

    XXX. Verformungskundliches Kolloquium

    Buchmayr, B. (Editor) & Harrer, O.-K. (Editor), 2011, Leoben, Österreich: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  34. 2010
  35. Published

    Analyse und Diskussion verschiedener Verfahren der Eigenspannungsmessung anhand von laserbehandelten dünnwandigen Blechen

    Forstner, K., Figala, G., Hatzenbichler, T. & Buchmayr, B., 2010, XXIX. Verformungskundliches Kolloquium. p. 85-90

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Effect of different contact formulations used in commercial FEM software packages on the results of hot forging simulations

    Hatzenbichler, T., Buchmayr, B., Harrer, O.-K. & Planitzer, F., 2010, In: Metallurgia Italiana. 11-12, p. 11-15

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    FEM-Simulation of High-Speed Corrugation Process with Abaqus/Explicit

    Hatzenbichler, T., Buchmayr, B. & Weiss, S., 2010, Metal forming 2010 : proceedings of the 13th International Conference on Metal Forming, September 19 - 22, 2010, Hotel Nikko Toyohashi, Toyohashi, Japan . Mori, K.-I. (ed.). p. 1014-1017

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Finite element method simulation of internal defects in billet-to-billet extrusion

    Hatzenbichler, T. & Buchmayr, B., 2010, In: Proceedings of the Institution of Mechanical Engineers / B (Part B, Journal of engineering manufacture). p. 1029-1042

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Improvement of buckling resistance of thin sheets by local laser treatment

    Figala, G. & Buchmayr, B., 2010, In: International journal of material forming. 3, p. 829-832

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Improvement of buckling resistance of thin sheets by local laser treatment

    Figala, G. & Buchmayr, B., 2010, 13th International ESAFORM Conference on Material Forming. AIP Press

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Lokale fertigungstechnische Verstärkungskonzepte zur Erhöhung der Materialeffizienz

    Buchmayr, B., Figala, G. & Wunsch, L., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. 155, p. 307-312

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Manufacturing of precision forgings by radial forging

    Wallner, S., Harrer, O.-K. & Buchmayr, B., 2010, AMPT 2010 "Advances in Materials and Processing Technologies". p. 315-320

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Material flow of a warm formed profile considering the pre-treatment of the material

    Harrer, O.-K., Buchmayr, B. & Wallner, S., 2010, In: International journal of material forming. p. 327-330

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Metallurgische Einflüsse auf die Umformbarkeit von Stählen

    Buchmayr, B. & Bernhard, C., 2010, XXIX. Verformungskundliches Kolloquium. p. 5-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    New developments in the field of continuous production of corrugated metal hoses

    Weiss, S., Hatzenbichler, T. & Buchmayr, B., 2010, In: Tube & pipe technology. 23, 4, p. 106-110

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Simulation des Walzens von Rippenplatten UIC60-0

    Harrer, O.-K., Buchmayr, B. & Riedl, A., 2010, MEFORM 2010 80 Jahre Walzwerks- und Werkstofftechnologie in Freiberg. p. 226-237

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Simulation of cold forging under consideration of residual stresses induced by preceding drawing

    Hatzenbichler, T., Buchmayr, B. & Walzl, A., 2010, AMPT 2010 "Advances in Materials and Processing Technologies". p. 321-326

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Simulation of rolling of check rail support plates

    Harrer, O.-K., Riedl, A. & Buchmayr, B., 2010, In: Steel grips : journal of steel and related materials. 8, p. 34-37

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Untersuchungen zum Verbundgießen warmfester Legierungen

    Buchmayr, B. & Weligoschek, T., 2010, In: Berg- und hüttenmännische Monatshefte : BHM. 155, p. 318-324

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    XXIX. Verformungskundliches Kolloquium

    Buchmayr, B. (Editor) & Harrer, O.-K. (Editor), 2010, Leoben, Österreich: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  51. 2009
  52. Published

    Aktuelle Entwicklungen am Lehrstuhl für Umformtechnik

    Buchmayr, B., 2009, Aktuelle Entwicklungen am Lehrstuhl für Umformtechnik. p. 187-193

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Anwendung der thermomechanischen Behandlung beim Walzen von nahtlosen Stahlrohren

    Klarner, J.K.-H. & Buchmayr, B., 2009, Anwendung der thermomechanischen Behandlung beim Walzen von nahtlosen Stahlrohren. p. 191-204

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Charakterisierung eines Radialschmiedeprozesses zum Oberflächenverdichten von P/M Zahnrädern mittels FEM

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2009, Charakterisierung eines Radialschmiedeprozesses zum Oberflächenverdichten von P/M Zahnrädern mittels FEM. p. 9-18

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  55. Published

    Determination of the real contact area for numerical simulation

    Buchner, B., Buchner, M. & Buchmayr, B., 2009, In: Tribology International. 42, p. 897-901

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Development and Validation of a Finite-Element Model for Radial Forging

    Wallner, S., Harrer, O.-K., Hatzenbichler, T. & Buchmayr, B., 2009, X International Conference on Computational Plasticity (Complas), Barcelona/Spain, (Tagungsband auf CD). p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Effect of different contact formulations used in commercial FEM-Software Packages on the results of hot forging simulations

    Hatzenbichler, T., Harrer, O.-K., Buchmayr, B. & Planitzer, F., 2009,

    Hot forming of Steels & Product Properties

    .     p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  58. Published

    Einflüsse auf die Umformbarkeit von Aerosolspraydosen

    Taschauer, M. & Buchmayr, B., 2009, Einflüsse auf die Umformbarkeit von Aerosolspraydosen. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 125-130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  59. Published

    FEM - Simulation of Long Term Die Heating during High - Frequency Incremental Hot Forging Processes

    Hatzenbichler, T., Wallner, S., Buchmayr, B., Prevedel, P. & Caliskanoglu, D., 2009,

    Material Science & Technology (MS&T 2009)

    .     p. 2247-2257

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  60. Published

    FEM study on the penetration of projectiles into steel sheets

    Hatzenbichler, T. & Buchmayr, B., 2009, In: International journal of material forming. Vol.2, p. 789-792

    Research output: Contribution to journal › Article › Research › peer-review

  61. Published

    FEM Study on the Penetration of Projectiles into steel sheets

    Hatzenbichler, T. & Buchmayr, B., 2009, FEM Study on the Penetration of Projectiles into steel sheets. AIP Press, p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    FEM-Supported Development of a Radial Forging Process for Surface Densification of P/M Gears

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2009, FEM-Supported Development of a Radial Forging Process for Surface Densification of P/M Gears. AIP Press, p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  63. Published

    FEM-Supported Development of a Radial Forging Process for Surface Densification of P/M Gears

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2009, In: International journal of material forming. 2, p. 93-96

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Form vollendet

    Buchmayr, B., 2009, In: Kleine Zeitung / Steiermark - Leoben und rund um den Erzberg. p. 23-23

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Herstellung von Stahl-Aluminium-Werkstoffverbunden durch Walzplattieren

    Lehofer, H. & Buchmayr, B., 2009, 4. Landshuter Leichtbau-Colloquium (26.-27.2.2009, Hochschule Landshut). LC-Verl., p. 187-193

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  66. Published

    Improving the dynamic and stability behavior of plates by laser treatment

    Bilik, C., Rammerstorfer, F. G., Daxner, T., Figala, G. & Buchmayr, B., 2009, 6th ICCSM Int. Congress of Croatian Society of Mechanics Dubrovinik.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  67. Published

    Investigation of a Cogging Process for Surface Densification of PM Gears by FEM Simulation

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2009,

    Proceedings of the MPIF/APMI International Conference on Powder Metallurgy & Particulate Materials

    .     p. 0-0

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Investigation of the material flow of a warm formed profile

    Harrer, O.-K., Wallner, S. & Buchmayr, B., 2009,

    Hot forming of Steels & Product Properties

    .     p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  69. Published

    Kaltumformung - eine systemanalytische Betrachtung

    Buchmayr, B., 2009, Kaltumformung - eine systemanalytische Betrachtung. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 5-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  70. Published

    Microstructural aspects and recrystallization behaviour of the direkt rolling of steel using laborytory simulation

    Gelder, S. & Buchmayr, B., 2009,

    Hot forming of Steels & Product Properties

    .     p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  71. Published

    Optische Messungen zur Ermittlung der Eigenspannungen an Kaltbändern

    Forstner, K. & Buchmayr, B., 2009, Optische Messungen zur Ermittlung der Eigenspannungen an Kaltbändern. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 119-124

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  72. Published

    Physikalische Simulation der Gefügeentwicklung im Zuge des Direkteinsatzes

    Gelder, S., Buchmayr, B., Stöckl, C., Linzer, B. & Hohenbichler, G., 2009, Physikalische Simulation der Gefügeentwicklung im Zuge des Direkteinsatzes. p. 91-100

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Radialschmieden im Einstechverfahren

    Wallner, S., Harrer, O.-K. & Buchmayr, B., 2009, Radialschmieden im Einstechverfahren. p. 19-28

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Recrystallization and grain growth in the nickel-based superalloy Allvac 718Plus / Dedicated to Professor Dr. Franz Jeglitsch on the occasion of his 75th birthday

    Sommitsch, C., Huber, D., Ingelman-Sundberg, F., Mitsche, S., Stockinger, M. & Buchmayr, B., 2009, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 100, p. 1088-1098

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Reduction of Porosity in PM Components by Metal Forming Technologies

    Hatzenbichler, T., Buchmayr, B. & Planitzer, F., 2009, COMET MPPE Workshop Damage, Materials Center Leoben. p. 1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  76. Published

    Simulation des Kopfstauchens unter Berücksichtigung des Vorzuges

    Hatzenbichler, T. & Buchmayr, B., 2009, Simulation des Kopfstauchens unter Berücksichtigung des Vorzuges. Montanuniversität Leoben, Lehrstuhl für Umformtechnik, p. 73-79

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  77. Published

    Umformtechnischer Leichtbau

    Buchmayr, B., 2009, Leichtbau Prinzipien, Werkstoffauswahl und Fertigungsvarianten. p. 214-246

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  78. Published

    Werkstoffe für die Energietechnik - Anforderungen, Anwendungen und Entwicklungspotenziale

    Buchmayr, B., 2009, In: Berg- und hüttenmännische Monatshefte : BHM. 5, p. 181-188

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    XXVIII. Verformungskundliches Kolloquium

    Buchmayr, B. (Editor) & Harrer, O.-K. (Editor), 2009, Leoben, Österreich: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  80. 2008
  81. Published

    Characterisation of different lubricants concerning the friciton coefficient in forging of AA2618

    Buchner, B., Maderthoner, G. & Buchmayr, B., 2008, In: Journal of materials processing technology. 198, p. 41-47

    Research output: Contribution to journal › Article › Research › peer-review

  82. Published

    Comparison of Yield Functions for Compressible PM-Materials

    Wallner, S., Hatzenbichler, T. & Buchmayr, B., 2008, XXVII. Verformungskundliche Kolloquium, 8.-11.3.2008, Planneralm/Donnersbach. Lehrstuhl für Umformtechnik. Bruno Buchmayr, p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  83. Published

    Comparison of yield functions for pm-materials

    Wallner, S., Hatzenbichler, T. & Buchmayr, B., 2008, Metform Conference 2008. p. 473-478

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  84. Published

    Gekoppelte Umform- und Gefügesimulation beim Radial- und Gesenkschmieden

    Harrer, O.-K., Sommitsch, C. & Buchmayr, B., 2008, MEFORM 2008, Simulation von Umformprozessen. Inst. für Metallformung, p. 18-27

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Implementieren von Fließbedingungen in DEFORM 3DTM zur FEM Simulation der Verdichtung von PM-Werkstoffen

    Wallner, S., Hatzenbichler, T. & Buchmayr, B., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 435-438

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Investigation of different parameters on roll bonding quality of aluminium and steel sheets

    Buchner, M., Buchner, B., Buchmayr, B., Kilian, H. & Riemelmoser, F., 2008, 11th ESAFORM Conference on Material Forming.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  87. Published

    Investigation of different parameters on roll bonding quality of aluminium and steel sheets

    Buchner, M., Buchner, B., Buchmayr, B., Kilian, H. & Riemelmoser, F., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  88. Published

    Investigation of different parameters on roll bonding quality of aluminium and steel sheets

    Buchner, M., Buchner, B., Buchmayr, B., Kilian, H. & Riemelmoser, F., 2008, In: International journal of material forming. 1, p. 1279-1282

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Investigation of friction in warm forging of AA6082

    Buchner, B., Weber, A. & Buchmayr, B., 2008, 11th ESAFORM Conference on Material Forming. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  90. Published

    Investigation of friction in warm forging of AA6082

    Buchner, B., Weber, A. & Buchmayr, B., 2008, In: International journal of material forming. 1, p. 1215-1218

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Kriterien zur Auswahl von Fertigungsverfahren

    Buchmayr, B., 2008, 1. Workshop "Wirtschaftliche Fertigung". p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    Microstructure modeling of the dynamic recrystallization kinetics during turbine disc forging of the nickel based superalloy Allvac 718PlusTM

    Huber, D., Stotter, C., Sommitsch, C., Mitsche, S., Poelt, P., Buchmayr, B. & Stockinger, M., 2008, Superalloys 2008, Roger C. Reed et al. Eds., TMS. p. 855-861

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    Microstructure modeling of the dynamic recrystallization kinetics during turbine disc forging of the nickel based superalloy Allvac 718PlusTM

    Huber, D., Stotter, C., Sommitsch, C., Mitsche, S., Poelt, P. & Buchmayr, B., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  94. Published

    Mikrostrukturentwicklung und duktile Schädigung beim Gesenkschmieden

    Sommitsch, C., Harrer, O.-K., Rüf, G. & Buchmayr, B., 2008, Der Pawelski - Umformtechnik im Spannungsfeld zwischen Plastomechanik und Werkstofftechnik. p. 113-123

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  95. Published

    Oberflächenverdichten von P/M-Zahnrädern durch Radialschmieden

    Planitzer, F., Hatzenbichler, T. & Buchmayr, B., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 430-434

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Vergleichende Untersuchungen zum Eindring- und Durchziehverhalten von Feinblechen

    Buchmayr, B., Hatzenbichler, T. & Kessler, F., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 443-449

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Vorformoptimierung für das Gesenkschmieden mittels numerischer Simulation

    Hatzenbichler, T. & Buchmayr, B., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 413-417

    Research output: Contribution to journal › Article › Research › peer-review

  98. Published

    Werkstoff- und verfahrenstechnische Optimierung bei der Herstellung hochfester Schrauben

    Buchmayr, B., Hatzenbichler, T., Kienreich, R. & Beyer, S., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 423-429

    Research output: Contribution to journal › Article › Research › peer-review

  99. Published

    XXVII. Verformungskundlichen Kolloquium

    Buchmayr, B. (Editor) & Harrer, O.-K. (Editor), 2008, Leoben, Österreich: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  100. 2007
  101. Published

    A numerical sensitivity study to determine the main influence parameters on the back-end defect

    Buchmayr, B., Hatzenbichler, T. & Umgeher, A., 2007, In: Journal of materials processing technology. 182, p. 73-78

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    A Practical Approach to Preform Design for Different Materials

    Harrer, O.-K., Sommitsch, C., Rüf, G. & Buchmayr, B., 2007, ESAFORM Conference on Material Forming. AIP Press, p. 15-20

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  103. Published

    Charakterisierung unterschiedlicher Schmierstoffe hinsichtlich des Reibzahlverlaufes beim Schmieden von Aluminiumlegierungen

    Buchner, B., Maderthoner, G. & Buchmayr, B., 2007, XXVI. Verformungskundliches Kolloquium. p. 255-265

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  104. Published

    Coupled Physical and Numerical Simulation to Optimize Thermo-mechanical Metal Forming Processes

    Sommitsch, C. & Buchmayr, B., 2007, In: Steel research international. 78, p. 740-744

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Development of aluminium-clad steel sheet by roll-bonding for the automotive industry

    Buchner, M., Buchmayr, B., Bichler, C. & Riemelmoser, F., 2007, 10th International ESAFORM Conference on Material Forming. p. 264-268

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  106. Published

    Einfluss reduzierter Schmiedetemperaturen auf die Eigenschaften von AFP-Stählen

    Buchmayr, B. & Lehofer, H., 2007, Workshop "Moderne thermomechanische Prozessstrategien in der Stahlumformung". p. 53-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  107. Published

    Estimation of friction under forging conditions by means of the ring-on-disc test

    Buchner, B., Umgeher, A. & Buchmayr, B., 2007, 10th ESAFORM Conference on Material Forming. AIP Press, p. 505-508

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 Next
View graph of relations

Latest Research Output

View more (255)