Andreas Ludwig

301 - 400 out of 533Page size: 100

Research output

  1. 2012
  2. Published

    Thermo-mechanical modeling of dendrite deformation in continuous casting of steel

    Domitner, J., Drezet, J.-M., Wu, M. & Ludwig, A., 2012, IOP Conf. Series: Materials Science and Engineering. p. 012058-1-012058-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Using a two-phase columnar solidification model to study the principle of mechanical softreduction in slab casting

    Wu, M., Domitner, J. & Ludwig, A., 2012, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 43, p. 945-964

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Vibration induced flow in a horizontal centrifugal casting

    Kharicha, A., Bohàcek, J., Ludwig, A. & Wu, M., 2012, Symposium on "CFD and Simulation in Materials Processing". p. 227-234

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Vibration induced flow in a horizontal centrifugal casting

    Kharicha, A., Bohacek, J., Ludwig, A. & Wu, M., 2012, CFD Modeling and Simulation in Materials Processing. p. 227-234

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  6. 2011
  7. Published

    Simulation of the Deformation of a Flexible Combo Bag in a DC Aluminium Casting

    Kharicha, A., Ludwig, A. & Wu, M., 20 Apr 2011, Supplemental Proceedings: Materials Fabrication, Properties, Characterization, and Modeling. Vol. 2. p. 273-278 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  8. Published

    Solidification simulation and macrosegregation prediction in DC casting of bronze alloys

    Hao, J., Grasser, M. & Ludwig, A., 1 Mar 2011, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 64, 2, p. 71-78 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Numerical study and experimental investigation of solidification phenomena in semi-continuous casting of Bronze

    Hao, J., Grasser, M., Wu, M. & Ludwig, A., 11 Jan 2011, Materials Processing Technologies. p. 1401-1404 4 p. (Advanced Materials Research; vol. 154-155).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    3D simulation of interdendritic flow through a Al-18wt.%Cu structure captured with X-ray microtomography

    Domitner, J., Hölzl, C., Kharicha, A., Wu, M., Ludwig, A., Köhler, M. & Ratke, L., 2011, IOP Conf. Series: Materials Science and Engineering. p. 012016-1-012016-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    3D simulation of interdendritic flow through a Al-18wt.%Cu structure captured with X-ray microtomography

    Domitner, J., Hölzl, C., Kharicha, A., Wu, M., Ludwig, A., Köhler, M. & Ratke, L., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  12. Published

    3d simulation of the electro-slag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Proceeding of the TMS Annual Meeting. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    3D simulation of the melting during an electro-slag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Int. Symp. on Liquid Metal Processing and Casting (LMPC-11). p. 41-48

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    A 3-phase model for mixed columnar-equiaxed solidification in DC casting of bronze

    Hao, J., Grasser, M., Wu, M., Ludwig, A., Riedle, J. & Eberle, R., 2011, IOP Conf. Series: Mater. Sci. Eng., vol. 27. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    A numerical study on the principle of mechanical softreduction for reducing the centreline segregation in slab casting

    Wu, M., Domitner, J., Ludwig, A. & Mayer, F., 2011, Proceedings of the 4rd Int. Conf. Simulation and Modeling in Metallurgical Processes in Steelmaking (STEELSIM 2011). p. 4.1-11

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Coupling the turbulent flow with the solidification processes in OpenFOAM®

    Wu, M., Ludwig, A., Vakhrushev, A., Tang, Y., Nitzl, G. & Hackl, G., 2011, Proceedings of Open Source CFD Int. Conf. 2011. p. 1-21

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Droplet formation in small electroslag remelting processes

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Int. Symp. on Liquid Metal Processing and Casting (LMPC-11). p. 113-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Evaluation of a mixed columnar-equiaxed solidification model with laboratory castings

    Wu, M., Nunner, G., Ludwig, A., Li, J. & Schumacher, P., 2011, IOP Conf. Series: Mater. Sci. Eng., vol. 27. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    In-situ observation of coupled growth morphologies in organic peritectics

    Mogeritsch, J. & Ludwig, A., 2011, IOP Conf. Series: Mater. Sci. Eng.. Vol. 27. p. 012028-012032

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    In-situ observation of coupled growth morphologies in organic peritectics

    Mogeritsch, J. P. & Ludwig, A., 2011, In: IOP Conference Series: Materials Science and Engineering. 27, 1, 012028.

    Research output: Contribution to journal › Conference article › peer-review

  21. Published

    In-situ Observation of Coupled Peritectic Growth

    Ludwig, A. & Mogeritsch, J., 2011, Solidification Science and Technology: Proceedings of the John Hunt International Symposium. p. 233-242

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse

    Ludwig, A., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Liquid metal inside a horizontally rotating cylinder under vibrations

    Bohàcek, J., Kharicha, A., Ludwig, A. & Wu, M., 2011, Proceedings of Experimental Fluid Mechanics (EFM 2011). p. 564-573

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Modeling of Heat Transfer and Solidification Processes in Thin Slab Caster

    Vakhrushev, A., Ludwig, A., Wu, M., Tang, Y., Nitzl, G. & Hackl, G., 2011, European Continous Casting Conference ECCC 2011. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Modeling of nonmetallic inclusions and gas bubbles motion in continuous caster

    Vakhrushev, A., Ludwig, A., Wu, M., Tang, Y., Nitzl, G. & Hackl, G., 2011, Proceedings of the 4rd Int. Conf. Simulation and Modeling in Metallurgical Processes in Steelmaking (STEELSIM 2011). p. 17.1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Modeling the Formation and the Reduction of Macrosegregation in Continuously Cast Steel Slabs

    Domitner, J., Wu, M., Mayer, F., Ludwig, A., Kaufmann, B., Reiter, J. & Schaden, T., 2011, Proceedings of the 7th European Continuous Casting Conference (ECCC 2011). p. 6.1-6.8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Numerical microstructure prediction for an aluminium casting and its experimental validation

    Unterreiter, G., Ludwig, A. & Wu, M., 2011, In: China Foundry. 8, 3, p. 331-336

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Numerical Study and experiment investigation of solidification phenomena in semi-continuous casting of Bronze

    Hao, J., Grasser, M., Wu, M. & Ludwig, A., 2011, In: Advanced materials. 154-155, p. 1401-1414

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Numerical Study of the Thermosolutal Convection Induced Macrosegregation during Colummar Solidification

    Hao, J., Wu, M., Ludwig, A. & Grasser, M., 2011, In: Advanced materials. 154-155, p. 1415-1418

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Simulation of the deformation of a flexible combo bag in a DC aluminium casting

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Proceeding of TMS Annual Meeting. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Simulation of the melting of a flat electrode during an elektroslag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Proceedings of the 4rd Int. Conf. Simulation and Modeling in Metallurgical Processes in Steelmaking (STEELSIM 2011). p. 19.1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Spatio-temporal variation of the electromagnetic field during the electroslag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2011, 8th Int. Pamir Conf. on Fund. and Applied MHD (PAMIR). p. 695-699

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Study of the channel segregation using a two-phase columnar solidification model

    Li, J., Wu, M., Hao, J. & Ludwig, A., 2011, IOP Conf. Series: Mater. Sci. Eng., vol. 27. p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Thermal state of the electrode during the electro-slag remelting process

    Kharicha, A., Ludwig, A. & Wu, M., 2011, Liquid Metal Processing and Casting. p. 113-119

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Through-process simulation of aluminium casting A356-simulation of solidification and stress analysis during heat treatment

    Unterreiter, G., Wlanis, T., Ludwig, A., Wu, M., Sommitsch, C. & Mayer, F., 2011, In: International journal of multiphysics. p. 209-217

    Research output: Contribution to journal › Article › Research › peer-review

  36. 2010
  37. Published

    3-D microprobe analysis of dendritic structures in steel

    Domitner, J., Kharicha, A., Ludwig, A. & Grasser, M., 30 Nov 2010, AIST Steel Properties and Applications Conference Proceedings - Combined with MS and T'10, Materials Science and Technology 2010. p. 735-743 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Modelling mixed columnar-equiaxed solidification with melt convection and grain sedimentation - Part I: Model description

    Wu, M., Fjeld, A. & Ludwig, A., 1 Nov 2010, In: Computational materials science. 50, 1, p. 32-42 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Modelling mixed columnar-equiaxed solidification with melt convection and grain sedimentation - Part II: Illustrative modelling results and parameter studies

    Wu, M., Ludwig, A. & Fjeld, A., 1 Nov 2010, In: Computational materials science. 50, 1, p. 43-58 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Simulation and modelling of metallurgical processes in steelmaking

    Ludwig, A., 1 Aug 2010, In: Steel research international. 81, 8, 1 p.

    Research output: Contribution to journal › Editorial › peer-review

  41. Published

    3D Microprobe Analysis of Dendritic Structures in Steel

    Domitner, J., Kharicha, A., Ludwig, A. & Grasser, M., 2010,

    Proceedings of the International Conference on Materials Science & Technology (MS&T'10)

    .     p. 908-916

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    A Method for the Reconstruction of Three-Dimensional Dendritic Structures in Steel Considering Their Changing Shape during Solidification

    Ludwig, A., Kharicha, A. & Domitner, J., 2010, A Method for the Reconstruction of Three-Dimensional Dendritic Structures in Steel Considering Their Changing Shape during Solidification. p. 908-916

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    Columnar to Equiaxed Transition During Ingot Casting Using Ternary Alloy Composition

    Könözsy, L., Ishmurzin, A., Grasser, M., Wu, M., Ludwig, A., Tanzer, R. & Schützenhöfer, W., 2010, In: Materials Science Forum . 649, p. 349-354

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Erstarrungssimulation im Strangguss von Bronze zur Bestimmung von Makroseigerungseffekten

    Hao, J., Wu, M., Ludwig, A., Riedle, J. & Eberle, R., 2010, DGM JSymposium Stranggiessen 2010, ed. H.R Müller, Werkstoffinformationsgesellschaft. p. 99-104

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Experimental Investigation on the Ternary Phase Diagram Cu-Sn-P

    Grasser, M., Ludwig, A. & Schillinger, W., 2010, Copper 2010. p. 49-64

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Importance of Melt Flow in Solidifying Mushy Zone

    Wu, M., Vakhrushev, A., Nunner, G., Pfeiler, C., Kharicha, A. & Ludwig, A., 2010, In: The open transport phenomena journal . 5, 2, p. 16-23

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Influence of an imposed vertical current on the droplet formation during a melting process

    Kharicha, A. & Ludwig, A., 2010, Influence of an imposed vertical current on the droplet formation during a melting process. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Influence of the slag/pool interface on the solidification in an electroslag remelting process

    Kharicha, A., Schuetzenhoefer, W., Ludwig, A. & Reiter, G., 2010, In: Materials Science Forum . p. 229-236

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    In situ observation of solidification in an organic peritectic alloy system

    Mogeritsch, J., Eck, S., Grasser, M. & Ludwig, A., 2010, In: Materials Science Forum . p. 159-164

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Interaction of a Flexible Combo Bag with the Flow in a DC Aluminium Casting DGM

    Kharicha, A., Ludwig, A. & Wu, M., 2010, Symposium Stranggiessen 2010.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse

    Ludwig, A., 2010

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. Published

    Macrosegregation Prediction for DC Casting of Ternary Bronze Alloys

    Hao, J., Grasser, M., Wu, M., Ludwig, A., Riedle, J. & Eberle, R., 2010, Copper. p. 65-80

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Method for a through-process simulation of an aluminium casting

    Unterreiter, G., Ludwig, A., Wu, M., Wlanis, T., Sommitsch, C. & Mayer, F., 2010, Method for a through-process simulation of an aluminium casting. p. 1-9

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    Modeling mixed columnar-equiaxed solidification with melt convection and grain sedimentation-Part II: Illustrative modeling results and parameter studies

    Wu, M., Ludwig, A. & Fjeld, A., 2010, In: Computational materials science. 50, p. 32-42

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Modeling mixed columnar-equiaxed solidification with melt convection and grain sedimentation-Part I: Model description

    Wu, M., Fjeld, A. & Ludwig, A., 2010, In: Computational materials science. 50, p. 43-58

    Research output: Contribution to journal › Article › Research › peer-review

  56. Published

    Modeling of Turbulent Melt Flow and Solidification Processes in Steel Continuous Caster with the Open Source Software Package OpenFOAM

    Vakhrushev, A., Ludwig, A., Wu, M., Tang, Y., Nitzl, G. & Hackl, G., 2010, Open Source CFD Int. Conf. 2010.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  57. Published

    Numerical and Experimental Investigation of NH4Cl Solidification

    Könözsy, L., Stefan Kharicha, M., Eck, S., Wu, M. & Ludwig, A., 2010, In: Materials Science Forum . 649, p. 367-372

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    On the Formation of Centreline Segregation in Continuous Slab Casting of Steel due to Bulging and/or Feeding

    Mayer, F., Wu, M. & Ludwig, A., 2010, In: Steel research international. 81, p. 660-667

    Research output: Contribution to journal › Article › Research › peer-review

  59. Published

    Reconstruction of Three-Dimensional Dendritic Structures Based on the Investigation of Microsegregation Patterns

    Domitner, J., Kharicha, A., Grasser, M. & Ludwig, A., 2010, In: Steel research international. 81, p. 644-651

    Research output: Contribution to journal › Article › Research › peer-review

  60. 2009
  61. Published

    Numerical and experimental investigations on the ESR process of the hot work tool steel H11

    Kharicha, A., Schützenhöfer, W., Ludwig, A. & Tanzer, R., 1 Dec 2009, LMPC 2009 - Proceedings of the International Symposium on Liquid Metal Processing and Casting. p. 235-242 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  62. Published

    An idea to treat the dendritic morphology in mixed columnar-equiaxed solidification

    Wu, M. & Ludwig, A., 4 Nov 2009, In: International journal of cast metals research. 22, 1-4, p. 323-326 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  63. Published

    Flow patterns and re-melting during filling of a large composite casting

    Fjeld, A. & Ludwig, A., 4 Nov 2009, In: International journal of cast metals research. 22, 1-4, p. 111-114 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  64. Published

    Reformulation of time averaged Joule heating in presence of temperature fluctuations

    Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 4 Nov 2009, In: International journal of cast metals research. 22, 1-4, p. 155-159 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  65. Published

    Modeling equiaxed solidification with melt convection and grain sedimentation-I: Model description

    Wu, M. & Ludwig, A., 1 Nov 2009, In: Acta Materialia. 57, 19, p. 5621-5631 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  66. Published

    Modeling equiaxed solidification with melt convection and grain sedimentation-II. Model verification

    Wu, M. & Ludwig, A., 1 Nov 2009, In: Acta Materialia. 57, 19, p. 5632-5644 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  67. Published

    Experimental and numerical modeling of the flow field in an industrial bronze caster - Improving the numerical model

    Eck, S., Pfeiler, C., Kharicha, A., Ludwig, A. & Evans, J. W., 24 Jun 2009, TMS Annual Meeting. p. 635-642 8 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  68. Published

    Thermal stability of a binary non-faceted/non-faceted peritectic organic alloy at elevated temperatures

    Mogeritsch, J. P., Ludwig, A., Eck, S., Grasser, M. & McKay, B. J., 1 May 2009, In: Scripta materialia. 60, 10, p. 882-885 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  69. Published

    Measurement of the Solid-Liquid Interface Energy in Ternary Alloy Systems

    Bulla, A., Subasic, E., Berger, R., Bührig-Polaczek, A. & Ludwig, A., 26 Mar 2009, Phase Transformations in Multicomponent Melts. John Wiley & Sons, Großbritannien, p. 73-86 14 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  70. Published

    2nd International Conference on Advances in Solidification Processes ICASP-2, 17-20 June 2008, Seggau Castle, Graz, Austria Preface

    Schumacher, P., McKay, B., Eck, S. & Ludwig, A., 2009, In: International journal of cast metals research. 22, p. 1-1

    Research output: Contribution to journal › Article › Research › peer-review

  71. Published

    An Idea to Treat the Dendritic Morphology in the Mixed Columnar-Equiaxed Solidification

    Wu, M. & Ludwig, A., 2009, In: International journal of cast metals research. 22, p. 323-327

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Bulging vs. feeding, which mechanism dominates in regard to the formation of centerline segregation in steel continuous casting?

    Mayer, F., Wu, M. & Ludwig, A., 2009, Bulging vs. feeding, which mechanism dominates in regard to the formation of centerline segregation in steel continuous casting?. ASMET, p. 247-252

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  73. Published

    Development of a Method for the Reconstruction of Three-Dimensional Dendritic Structures in Steel

    Domitner, J., Fluch, J., Grasser, M. & Ludwig, A., 2009, Proceedings of the 3rd International Conference on Simulation and Modeling in Metallurgical Processes in Steelmaking (STEELSIM 2009). p. 128-134

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  74. Published

    Einfluss starker Konvektion während des Abfüllens in großindustriellen Gießereiprozessen

    Fjeld, A. & Ludwig, A., 2009, In: Berg- und hüttenmännische Monatshefte : BHM.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Experimental and Numerical Investigations of NH4Cl Solidification in a Mould. Part 1: Experimental results

    Stefan Kharicha, M., Eck, S., Könözsy, L., Kharicha, A. & Ludwig, A., 2009, In: International journal of cast metals research. 22, 1-4, p. 168 - 171 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. Published

    Experimental and Numerical Investigations of NH4Cl Solidification in a Mould. Part 2: numerical results

    Könözsy, L., Eck, S., Stefan Kharicha, M., Wu, M. & Ludwig, A., 2009, In: International journal of cast metals research. 22, 1-4, p. 172-174 3 p.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Experimental and Numerical Modelling of the Flow Field in a CuxSny Direct Chill Caster

    Eck, S., Pfeiler, C., Mayer, F., Ludwig, A. & Evans, J. W., 2009, In: International journal of cast metals research. 22, p. 74-77

    Research output: Contribution to journal › Article › Research › peer-review

  78. Published

    Flow Patterns and Re-melting during the Filling of a Large Composite Casting

    Fjeld, A. & Ludwig, A., 2009, In: International journal of cast metals research. 22, p. 111-114

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Influence of Strong Convection on Remelting and Species Transport in Composite Casting Processes

    Fjeld, A. & Ludwig, A., 2009, Influence of Strong Convection on Remelting and Species Transport in Composite Casting Processes. ASMET, p. 292-297

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  80. Published

    In-situ Observation of Unsteady Peritectic Growth Modes

    Ludwig, A., Mogeritsch, J. & Grasser, M., 2009, In: Transactions of the Indian Institute of Metals. p. 433-436

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse

    Ludwig, A., 2009

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  82. Published

    Macrosegregation Prediction for Ternary Bronze Alloys International Foundary Research

    Grasser, M., Hao, J., Ishmurzin, A., Mayer, F., Wu, M., Ludwig, A., Hofmann, U. & Riedle, J., 2009, In: International foundry research = Giessereiforschung. 61, p. 42-45

    Research output: Contribution to journal › Article › Research › peer-review

  83. Published

    Micro-Macrosegregation prediction based on solidification simulation for continuous casting of ternary bronze alloys

    Grasser, M., Ishmurzin, A., Mayer, F., Wu, M., Ludwig, A., Hofmann, U. & Riedle, J., 2009, Modeling of casting, welding, and advanced solidification processes - XII. p. 221-228

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  84. Published

    Microstructure Prediction Based on Ternary Solidification Simulation for Continuous Casting of Bronze

    Grasser, M., Ishmurzin, A., Mayer, F., Wu, M., Ludwig, A., Hofmann, U. & Riedle, J., 2009, Modeling of casting, welding and advanced solidification processes XII: proceedings of the Tenth International Conference on Modeling of Casting, Welding and Advanced Solidification Processes held in Vancouver, BC, Canada on June 7 - 14, 2009 . Cockcroft, S. L. & Maijer, D. J. (eds.). Warrendale: TMS, p. 221-228

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  85. Published

    Modeling Equiaxed Solidification with Melt Convection and Grain Sedimentation, Part II: Model Verification

    Wu, M. & Ludwig, A., 2009, In: Acta materialia. 57, p. 5632-5644

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Modeling Equiaxed Solidification with Melt Convection and Grain Sedimentation, Part I: Model Description

    Wu, M. & Ludwig, A., 2009, In: Acta materialia. 57, p. 5621-5631

    Research output: Contribution to journal › Article › Research › peer-review

  87. Published

    Numerical and Experimental Investigation of NH4Cl Solidification in a Mould. Part 2: Numerical Results

    Könözsy, L., Stefan Kharicha, M., Eck, S., Wu, M. & Ludwig, A., 2009, In: International journal of cast metals research. 22, p. 172-174

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    Numerical Investigation of Grid Influence for Formation of Macrosegregation

    Könözsy, L., Ishmurzin, A., Mayer, F., Grasser, M., Wu, M. & Ludwig, A., 2009, In: International journal of cast metals research. 22, p. 175-178

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Reformulation of the Time Averaged Joule Heating in the Presence of Temperature Fluctuations

    Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 2009, In: International journal of cast metals research. 22, p. 155-159

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Stability investigations of a binary organic alloy system with a peritectic phase diagram

    Ludwig, A., Mogeritsch, J., Grasser, M., Eck, S. & McKay, B., 2009, In: Scripta materialia. p. 882-885

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    Study of centerline macrosegregation in steel continuous casting with a two-phase volume averaging approach

    Ludwig, A., Mayer, F. & Wu, M., 2009, Study of centerline macrosegregation in steel continuous casting with a two-phase volume averaging approach. p. 279-286

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  92. Published

    Thermodynamic Description of the System Cu-Sn-P -Computational Thermodynamics and Experimental Investigation on the Systems CuSn and CuP

    Grasser, M., Mayer, F. & Ludwig, A., 2009, Thermodynamic Description of the System Cu-Sn-P -Computational Thermodynamics and Experimental Investigation on the Systems CuSn and CuP. p. 47-54

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  93. Published

    The validation of a multiphase model for the macrosegregations and primary structure of high grade steel ingots

    Tanzer, R., Schützenhöfer, W., Reiter, G., Fauland, H. P., Könözsy, L., Ishmurzin, A., Wu, M. & Ludwig, A., 2009, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 40, p. 305-311

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Using a Five-Phase Volume Averaging Approach to Model the Mixed Columnar-Equiaxed Solidification

    Wu, M. & Ludwig, A., 2009, Using a Five-Phase Volume Averaging Approach to Model the Mixed Columnar-Equiaxed Solidification. p. 537-544

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  95. Published

    Validation of a Multiphase Model for the Macrosegregation and Primary Structure of High Grade Steel Ingots

    Ishmurzin, A., Tanzer, R., Schuetzenhoefer, W., Reiter, G., Fauland, H. P., Könözsy, L., Wu, M. & Ludwig, A., 2009, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 40, p. 305-311

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Verbesserte metallurgische Prozesse durch moderne Simulationstechnik

    Odenthal, H. J., Rexroth, C. H., Sommerfeld, M., Ludwig, A., Baake, E. & Thess, A., 2009, In: Stahl und Eisen. 129, p. 37-46

    Research output: Contribution to journal › Article › Research › peer-review

  97. 2008
  98. Published

    Jahresbericht CD-Labor für Mehrphasensimulation met. Prozesse

    Ludwig, A., 2008

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  99. Published

    Modeling and Simulation of a Large Composite Casting

    Autumn, F. & Ludwig, A., 2008, EPD Congress 2008. p. 281-291

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  100. Published

    Multiphase Flow Modeling and Its Application Potentials in Steel Continuous Casting

    Ludwig, A., Wu, M., Pfeiler, C. & Mayer, F., 2008, Multiphase Flow Modeling and Its Application Potentials in Steel Continuous Casting. p. 30-37

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  101. Published

    Multiphase Flow Modeling and Its Application Potentials in Steel Continuous Casting

    Wu, M., Ludwig, A., Pfeiler, C. & Mayer, F., 2008, In: Journal of iron and steel research international. 15, p. 30-37

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Multiphase/multicomponent modeling of solidification processes: Coupling solidification kinetics with thermodynamics

    Ishmurzin, A., Gruber-Pretzler, M., Mayer, F., Wu, M. & Ludwig, A., 2008, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 99.2008, 6, p. 618-625 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Numerical Modeling of the Effect of Global Transport Phenomena on the Microstructure Formation

    Grasser, M., Mayer, F., Ishmurzin, A., Könözsy, L., Wu, M. & Ludwig, A., 2008, In: Berg- und hüttenmännische Monatshefte : BHM. 153, p. 278-281

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    On the Formation of Macrosegregations in Steel Ingot Castings

    Wu, M., Könözsy, L., Ludwig, A., Schützenhöfer, W. & Tanzer, R., 2008, In: Steel research international. 79, p. 637-644

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    On the Importance of Electric Currents Flowing directly into the Mould during an ESR Process

    Kharicha, A., Schützenhöfer, W., Ludwig, A., Tanzer, R. & Wu, M., 2008, In: Steel research international. 79, p. 632-636

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 Next
View graph of relations

Latest Research Output

View more (533)