Abdellah Kharicha

1 - 100 out of 305Page size: 100

Research output

  1. 2024
  2. Published

    Interplay of flow stratification, segregation channels, and crystal dynamics in a solidifying aqueous ammonium chloride solution

    Ludwig, A., Siyahatshayesteh, G., Stefan-Kharicha, M., Wu, M. & Kharicha, A., 27 Dec 2024, In: International journal of heat and mass transfer. 240.2025, 1 May, 8 p., 126638.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Modeling Freeze-Lining Formation: A Case Study in the Slag Fuming Process

    Gomes Rodrigues, C., Wu, M., Chintinne, M., Ishmurzin, A., Hackl, G., Lind, C. & Kharicha, A., 27 Oct 2024, In: Steel research international. 2025, ??? Stand: 17. Februar 2025, 15 p., 2400618.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Modelling freckles and spurious grain formation in directionally solidified superalloy castings

    Zhang, H., Zhao, Y., Xiong, W., Ma, D., Ludwig, A., Kharicha, A. & Wu, M., 19 Oct 2024, In: Communications materials. 2024, 5, 12 p., 232.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    A Coupled Magnetohydrodynamics (MHD) and Thermal Stress-Strain Model to Explore the Impact of Gas Cooling on Ingot Solidification Shrinkage in Vacuum Arc Remelting (VAR) Process

    Bohacek, J., Karimi Sibaki, E., Vakhrushev, A., Mraz, K., Hvozda, J., Wu, M. & Kharicha, A., 4 Sept 2024, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 55.2024, December, p. 4408-4417 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Advancements in Electric Arc Furnace Technology and Numerical Modeling of Hydrogen Electric Arcs

    Al Nasser, M., Wu, M. & Kharicha, A., Sept 2024.

    Research output: Contribution to conference › Poster › Research

  7. Published

    A numerical study on the solidification shrinkage of the ingot in vacuum arc remelting (VAR) process

    Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Wu, M. & Bohacek, J., Sept 2024.

    Research output: Contribution to conference › Poster › Research

  8. Published

    A numerical study on the solidification shrinkage of the ingot in vacuum arc remelting (VAR) process

    Mraz, K., Bohacek, J., Karimi Sibaki, E., Vakhrushev, A., Wu, M. & Kharicha, A., Sept 2024. 7 p.

    Research output: Contribution to conference › Paper › peer-review

  9. Published

    Consideration of the timing of dendrite pinch-off for a flow-driven fragmentation mechanism during the casting process

    Zhang, H., Wu, M. & Kharicha, A., Sept 2024.

    Research output: Contribution to conference › Paper › peer-review

  10. Published

    Generation of Tornados and Cyclones from Electrovortex Under External Fields

    Al Nasser, M., Wu, M. & Kharicha, A., Sept 2024.

    Research output: Contribution to conference › Poster › Research

  11. Published

    Insights into Electric Arc Furnace Behavior: A prectical Simulation Approach

    Al Nasser, M., Redl, C., Holzgruber, H., Ishmurzin, A., Voller, N., Hackl, G. & Kharicha, A., Sept 2024.

    Research output: Contribution to conference › Poster › Research

  12. Published

    Magnetohydrodynamics phenomene in continuous casting process under applied electromagnetic braking (EMBr)

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Tang, Y., Hackl, G., Watzinger, J. & Kharicha, A., Sept 2024.

    Research output: Contribution to conference › Poster › Research

  13. Published

    On Modelling Electromagnetic Braking in Thin Slab Continuous Casting: fundamentals, applications and outlooks

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Tang, Y., Hackl, G., Watzinger, J. & Kharicha, A., Sept 2024.

    Research output: Contribution to conference › Poster › Research

  14. Published

    Using CFD to study freeze-lining formation: a collaborative research project between academia and industry

    Gomes Rodrigues, C., Wu, M., Chintinne, M., Ishmurzin, A., Hackl, G., Lind, C., Qiu, Z., Guo, M., Malfliet, A. & Kharicha, A., Sept 2024. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  15. Published

    Comment on “Numerical study with OpenFOAM on heat conduction problems in heterogeneous media” by K. Zhang, C.-A. Wang, J.-Y. Tan, International Journal of Heat and Mass Transfer, Vol. 124 (2018) 1156–1162

    Bohacek, J., Mraz, K., Hvozda, J., Lang, F., Karimi Sibaki, E., Vakhrushev, A. & Kharicha, A., 1 Aug 2024, In: International journal of heat and mass transfer. 227.2024, 1 August, 3 p., 125603.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Multiphase Modeling of Dynamically Deforming Electrode-Electrolyte Interface in Electrochemical Systems

    Karimi Sibaki, E. & Kharicha, A., Aug 2024.

    Research output: Contribution to conference › Poster › Research

  17. Published

    Explanation for the linear solid/liquid interface recoil observed during directional solidification of a TRIS-NPG alloy under microgravity conditions

    Ludwig, A., Mogeritsch, J. P., Barati, H., Wu, M. & Kharicha, A., 23 Jul 2024, In: Journal of crystal growth. 644.2024, 15 October, 8 p., 127824.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    A numerical study on effects of current density distribution, turbulence, and magnetohydrodynamics (MHD) on electrolytic gas flow with application to alkaline water electrolysis (AWE)

    Karimi Sibaki, E., Vakhrushev, A., Wu, M., Bohacek, J. & Kharicha, A., 20 Jul 2024, In: Chemical Engineering Research and Design. 208.2024, August, p. 731-739 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Theoretical and experimental approaches to determine the mass transfer coefficient in the steel/slag/refractory system

    Schickbichler, M., Karimi Sibaki, E., Kharicha, A. & Michelic, S. K., 19 Jul 2024, 12th International Conference on Molten Slags, Fluxes and Salts (MOLTEN 2024) Proceedings. p. 239-249

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. E-pub ahead of print

    Mapping electro-vortex flow patterns from tornado to inverted tornado in a hemispherical container

    Abdi, M., Karimi Sibaki, E., Sommitsch, C., Barati, H., Al Nasser, M., Wu, M., Teplyakov, I. & Kharicha, A., 12 Jun 2024, (E-pub ahead of print) In: International Journal of Thermofluids. 23.2024, August, 11 p., 100721.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    A Study on Ammonium Chloride Dendrite Tip Kinetics: The Importance of the Solid–Liquid Density Change and Interfacial Kinetics

    Alrasheedi, N., Stefan-Kharicha, M., Sari, I., Ahmadein, M. & Kharicha, A., 6 Jun 2024, In: Materials. 17.2024, 11, 11 p., 2768.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Advancements in State-of-the-Art Simulation of the Slag in ESR Process

    Karimi Sibaki, E. & Kharicha, A., Jun 2024.

    Research output: Contribution to conference › Poster › Research

  23. Published

    CFD modelling of slag fuming, with focus on freeze-lining formation

    Gomes Rodrigues, C., Wu, M., Chintinne, M., Ishmurzin, A., Hackl, G., Voller, N., Ludwig, A. & Kharicha, A., Jun 2024, p. 839-846. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  24. Published

    Determination of transient heat transfer by cooling channel in high-pressure die casting using inverse method

    Bohacek, J., Mraz, K., Hvozda, J., Lang, F., Raudensky, M., Vakhrushev, A., Karimi Sibaki, E. & Kharicha, A., Jun 2024. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  25. Published

    Effects of the asymmetric and oscillating turbulent melt flow on the heat transfer and solidification inside the thin slab continuous casting mold under the applied electromagnetic brake

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Tang, Y., Hackl, G., Watzinger, J. & Kharicha, A., Jun 2024.

    Research output: Contribution to conference › Poster › Research

  26. Published

    Effects of the asymmetric and oscillating turbulent melt flow on the heat transfer and solidification inside the thin slab continuous casting (TSC) mold under the applied electromagnetic brake (EMBr)

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Tang, Y., Hackl, G., Watzinger, J., Bohacek, J. & Kharicha, A., Jun 2024. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  27. Published

    On the conditions for the occurrence of crystal avalanches during alloy solidification

    Siyahatshayesteh, G., Ludwig, A., Stefan-Kharicha, M., Wu, M. & Kharicha, A., Jun 2024. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  28. Published

    Tornado flow inside Electric Arc Furnace driven by External Magnetic Field

    Al Nasser, M., Redl, C., Holzgruber, H., Ishmurzin, A., Voller, N., Hackl, G. & Kharicha, A., Jun 2024.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Towards Sustainability: Exploring Hydrogen Arc utilization in Electric Arc Furnaces

    Kharicha, A., Al Nasser, M., Redl, C., Holzgruber, H., Ishmurzin, A., Voller, N. & Hackl, G., Jun 2024.

    Research output: Contribution to conference › Poster › Research

  30. Published

    Plasma Generation and Expansion in the Vacuum Arc Remelting (VAR) process

    Karimi Sibaki, E. & Kharicha, A., Apr 2024.

    Research output: Contribution to conference › Poster › Research

  31. Published

    Exploring Extreme Voltage Events in Hydrogen Arcs within Electric Arc Furnaces

    Al Nasser, M., Alrasheedi, N., Karimi Sibaki, E., Vakhrushev, A., Ahmadein, M., Ataya, S. & Kharicha, A., 28 Mar 2024, In: Sustainability. 16.2024, 7, 17 p., 2831.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    The Impact of Marangoni and Buoyancy Convections on Flow and Segregation Patterns during the Solidification of Fe-0.82wt%C Steel

    Sari, I., Wu, M., Ahmadein, M., Ataya, S., Alrasheedi, N. & Kharicha, A., 5 Mar 2024, In: Materials. 17.2024, 5, 16 p., 1205.

    Research output: Contribution to journal › Article › Research › peer-review

  33. E-pub ahead of print

    Assessment of URANS-Type Turbulent Flow Modelling of a Single Port Submerged Entry Nozzle (SEN) for Thin Slab Continuous Casting (TSC) Process

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J., Bohacek, J. & Kharicha, A., 26 Feb 2024, (E-pub ahead of print) In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 55.2024, April, p. 891-904 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Modeling Dendrite Coarsening and Remelting during Directional Solidification of Al-06wt.%Cu Alloy

    Sari, I., Alrasheedi, N., Ahmadein, M., Djuansjah, J., Hachani, L., Zaidat, K., Wu, M. & Kharicha, A., 16 Feb 2024, In: Materials. 17.2024, 4, 12 p., 912.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Prediction of the Secondary Arms Spacing Based on Dendrite Tip Kinetics and Cooling Rate

    Sari, I., Ahmadein, M., Ataya, S., Hachani, L., Zaidat, K., Alrasheedi, N., Wu, M. & Kharicha, A., 13 Feb 2024, In: Materials. 17.2024, 4, 15 p., 865.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Numerical modeling of clog fragmentation during SEN clogging in steel continuous casting

    Barati, H., Wu, M., Ilie, S., Kharicha, A. & Ludwig, A., 1 Feb 2024, In: Powder Technology. 434.2024, 1 February, 14 p., 119307.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Development of a Dross Build-Up Growth Process Model for Hot-Dip Galvanizing Considering Surface Reaction Kinetics

    Reiss, G., Eßl, W., Trasca, R. A., Mugrauer, C., Stefan-Kharicha, M., Kharicha, A., Gerold, E. & Goodwin, F., Feb 2024, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 55.2024, February, p. 53-63 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    3D Modelling of Electro Vortex Flow Inside Liquid Metal and Effect of External Magnetic Fields

    Al Nasser, M., Karimi Sibaki, E., Wu, M., Redl, C., Ishmurzin, A., Voller, N., Hackl, G. & Kharicha, A., 2024. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  39. Published

    A Numerical Study on the Influence of External Magnetic field on Hydrogen Electric Arc Flow

    Al Nasser, M., Karimi Sibaki, E., Wu, M., Redl, C., Ishmurzin, A., Voller, N., Hackl, G. & Kharicha, A., 2024. 7 p.

    Research output: Contribution to conference › Paper › peer-review

  40. Published

    Development and Application of a Computational Fluid Dynamics Model to Study Slag Freeze Lining

    Gomes Rodrigues, C., Wu, M., Kharicha, A., Ishmurzin, A., Hackl, G., Lind, C., Chintinne, M., Qiu, Z., Malfliet, A. & Guo, M., 2024, In: RHI bulletin : the journal of refractory innovations. 2024, 1, p. 77-81 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Effect of Marangoni flow during the solidification of a Fe- 0.82wt.%C steel alloy

    Sari, I., Wu, M., Ludwig, A. & Kharicha, A., 2024. 6 p.

    Research output: Contribution to conference › Paper › peer-review

  42. 2023
  43. Published

    Experimental and Numerical Investigations into Heat Transfer Using a Jet Cooler in High-Pressure Die Casting

    Bohacek, J., Mraz, K., Krutis, V., Kana, V., Vakhrushev, A., Karimi Sibaki, E. & Kharicha, A., 28 Nov 2023, In: Journal of Manufacturing and Materials Processing. 7.2023, 6, 14 p., 212.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    A multiphase model for exploring electrochemical Marangoni flow

    Karimi Sibaki, E., Vakhrushev, A., Kadylnykova, A., Wu, M., Ludwig, A., Bohacek, J. & Kharicha, A., 1 Sept 2023, In: Electrochemistry Communications. 155.2023, October, 6 p., 107567.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Effect of compressibility on industrial DC electric arcs

    Al Nasser, M., Barati, H., Redl, C., Ishmurzin, A., Voller, N., Hackl, G., Leuchtenmüller, M., Wu, M. & Kharicha, A., 22 Jul 2023, In: Results in Engineering. 19.2023, September, 12 p., 101312.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Transient Simulation of Diffusion-Limited Electrodeposition Using Volume of Fluid (VOF) Method

    Karimi Sibaki, E., Vakhrushev, A., Wu, M., Ludwig, A., Bohacek, J. & Kharicha, A., 4 Jul 2023, In: Journal of the Electrochemical Society. 170.2023, 7, 7 p., 072501.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Solidification Principle in Large Vertical Steel Casting Under the EMS Effect

    Zhang, Z., Wu, M., Zhang, H., Hahn, S., Wimmer, F., Ludwig, A. & Kharicha, A., 19 May 2023, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 54.2023, August, p. 1078-1085 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Effect of forced convection on the formation of the as-cast structure and macrosegregation of Sn-10wt.% Pb alloy: A numerical study

    Zhang, Z., Wu, M., Zhang, H., Ludwig, A. & Kharicha, A., 11 Mar 2023, In: International journal of heat and mass transfer. 280.2023, July, 15 p., 124050.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Impact of Submerged Entry Nozzle (SEN) Immersion Depth on Meniscus Flow in Continuous Casting Mold under Electromagnetic Brake (EMBr)

    Vakhrushev, A., Karimi Sibaki, E., Bohacek, J., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G., Watzinger, J. & Kharicha, A., 21 Feb 2023, In: Metals : open access journal . 13.2023, 3, 21 p., 444.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Modeling Framework for the Simulation of an Electric Smelting Furnace Considering Freeze Lining Formation

    Gomes Rodrigues, C., Wu, M., Ishmurzin, A., Hackl, G., Voller, N., Ludwig, A. & Kharicha, A., 21 Feb 2023, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 54.2023, April, p. 880-894 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Novel strategy to model deformation-induced strand contraction/dilatation during mechanical reduction

    Guan, R., Rodrigues, C. M. G., Ji, C., Zhu, M., Li, S., Wu, M., Kharicha, A., Vakhrushev, A. & Ludwig, A., Feb 2023, In: Applied Mathematical Modelling. 114.2023, February, p. 770-784 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Digital twin for directional solidification of a single-crystal turbine blade

    Zhang, H., Liu, X., Ma, D., Song, M., Ludwig, A., Kharicha, A. & Wu, M., 1 Jan 2023, In: Acta Materialia. 244.2023, 1 January, 15 p., 118579.

    Research output: Contribution to journal › Article › Research › peer-review

  53. Published

    Potential eutectic accumulation in single crystal turbine blade due to geometry effect: a numerical study

    Zhang, H. J., Liu, X. S., Ma, D. X., Ludwig, A., Kharicha, A. & Wu, M. H., 1 Jan 2023, IOP Conference Series: Materials Science and Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  54. Published

    ASSESMENT OF VOLUME OF FLUID METHODS TO MODEL ELECTROMAGNETIC BRAKE IN CONTINOUS CASTING MOLD USING OPENFOAM®

    Vakhrushev, A., Kharicha, A., Karimi Sibaki, E., Bohacek, J., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G. & Watzinger, J., 2023. 1 p.

    Research output: Contribution to conference › Abstract

  55. Published

    Assessment of Volume of Fluid Methods to Model Electromagnetic Brake in Continuous Casting Mold Using OpenFOAM®

    Vakhrushev, A., Kharicha, A., Karimi Sibaki, E., Bohacek, J., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G. & Watzinger, J., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  56. Published

    Continuum mixture solidification model for simulation of freeze lining in smelting furnace

    Gomes Rodrigues, C., Wu, M., Ishmurzin, A., Hackl, G., Voller, N., Ludwig, A. & Kharicha, A., 2023. 10 p.

    Research output: Contribution to conference › Paper › peer-review

  57. Published

    Dynamics of 3D Hydrogen Electric Arc under external Magnetic Field

    Kharicha, A., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  58. Published

    Flow-enhanced remelting of settling/floating globular crystals during mixed columnar-equiaxed solidification

    Wu, M., Zhang, Z., Ludwig, A. & Kharicha, A., 2023. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  59. Published

    Fluid flow and heat transfer in a liquid metal film under applied transversal magnetic field

    Al Nasser, M., Vakhrushev, A. & Kharicha, A., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  60. Published

    Impact of external magnetic fields on the melt pool geometry in vacuum arc remelting (VAR) process

    Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Wu, M. & Ludwig, A., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  61. Published

    Influence of external magnetic field on 3D electro vortex flow inside conducting liquids

    Al Nasser, M., Barati, H., Redl, C., Ishmurzin, A., Voller, N., Hackl, G., Wu, M., Ludwig, A. & Kharicha, A., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  62. Published

    Influence of the adjustable EMBr on the asymmetric flow in a thin slab caster with a misaligned SEN

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J. & Kharicha, A., 2023. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  63. Published

    Influence of the rotational component of a submerged entry nozzle jet on the free surface oscillations under the applied DC magnetic field

    Vakhrushev, A., Kharicha, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G. & Watzinger, J., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  64. Published

    Modelling 3D Electro vortex Flow inside liquid metal and Effect of External Magnetic Fields on Flow Pattern

    Al Nasser, M., Barati, H., Redl, C., Ishmurzin, A., Voller, N., Hackl, G., Wu, M., Ludwig, A. & Kharicha, A., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  65. Published

    Numerical study on the formation of spurious grains and freckles during the directional solidification of superalloys

    Zhang, Z., Wu, M., Liu, X., Song, M., Ludwig, A. & Kharicha, A., 2023. 11 p.

    Research output: Contribution to conference › Paper › peer-review

  66. Published

    On modelling conjugated heat transfer in the thin slab CC mold and solid shell formation under the applied EMBr

    Vakhrushev, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J., Bohacek, J. & Kharicha, A., 2023, In: IOP Conference Series: Materials Science and Engineering. 2023, 1274, 7 p., 012023.

    Research output: Contribution to journal › Conference article › peer-review

  67. Published

    Potential etutectic accumulation in single crytal turbine blade due to geometry effect: a numerical study

    Zhang, H., Ma, D., Ludwig, A., Kharicha, A. & Wu, M., 2023, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Conference article › peer-review

  68. Published

    Simulations of 3D Hydrogen Electric Arc and Effect of External Magnetic Field on Arc Flow Dynamics

    Al Nasser, M., Barati, H., Redl, H., Ishmurzin, A., Voller, N., Hackl, G., Wu, M., Ludwig, A. & Kharicha, A., 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  69. Published

    Transient simulation of melt flow, clogging, and clog fragmentation inside SEN during steel continuous casting

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 2023. 9 p.

    Research output: Contribution to conference › Paper › peer-review

  70. 2022
  71. Published

    Experimental and numerical investigations of arc plasma expansion in an industrial vacuum arc remelting (VAR) process

    Karimi-Sibaki, E., Peyha, M., Vakhrushev, A., Wu, M., Ludwig, A., Bohacek, J., Preiss, B. & Kharicha, A., Dec 2022, In: Scientific reports. 2022, 12, 14 p., 20405.

    Research output: Contribution to journal › Article › Research › peer-review

  72. Published

    Determination of Cooling Rate and Temperature Gradient during Formation of Cathode Spot Craters in a Vacuum Arc

    Mogeritsch, J., Franz, R., Golizadeh, M., Mitterer, C. & Kharicha, A., 19 Oct 2022, In: Crystals. 12.2022, 10, 13 p., 1486.

    Research output: Contribution to journal › Article › Research › peer-review

  73. E-pub ahead of print

    Dendrite fragmentation mechanism under forced convection condition by rotating magnetic field during unidirectional solidification of AlSi7 alloy

    Zhang, H., Wu, M., Rodrigues, C. M. G., Ludwig, A., Kharicha, A., Rónaföldi, A., Roósz, A., Veres, Z. & Svéda, M., 28 Sept 2022, (E-pub ahead of print) In: Acta Materialia. 241.2022, December, 14 p., 118391.

    Research output: Contribution to journal › Article › Research › peer-review

  74. Published

    Experimental Evaluation of MHD Modeling of EMS During Continuous Casting

    Zhang, H., Wu, M., Zhang, Z., Ludwig, A., Kharicha, A., Rónaföldi, A., Roósz, A., Veres, Z. & Svéda, M., Aug 2022, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 53.2022, 4, p. 2166-2181 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  75. Published

    Tornados and cyclones driven by Magneto-hydrodynamic forces

    Kharicha, A., Al-Nasser, M., Barati, H., Karimi-Sibaki, E., Vakhrushev, A., Abdi, M., Ludwig, A. & Wu, M., 1 Jul 2022, In: European Journal of Mechanics - B/Fluids. 94.2022, July-August, p. 90-105 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  76. E-pub ahead of print

    The Role of Mold Electromagnetic Stirring in the Dissipation of Superheat during the Continuous Casting of Billets

    Zhang, Z., Wu, M., Zhang, H., Ludwig, A. & Kharicha, A., 29 Jun 2022, (E-pub ahead of print) In: Steel research international. 93.2022, 10, 14 p., 2200065.

    Research output: Contribution to journal › Article › Research › peer-review

  77. Published

    Validation of a capillary-driven fragmentation model during mixed columnar-equiaxed solidification with melt convection and grain transport

    Rodrigues, C. M. G., Wu, M., Zhang, H., Ludwig, A. & Kharicha, A., Jun 2022, In: Materialia. 23.2022, June, 12 p., 101462.

    Research output: Contribution to journal › Article › Research › peer-review

  78. E-pub ahead of print

    Numerical modeling and experimental validation of the effect of arc distribution on the as-solidified Ti64 ingot in vacuum arc remelting (VAR) process

    Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Abdi, M., Wu, M., Ludwig, A., Bohacek, J. & Preiß, B., 11 May 2022, (E-pub ahead of print) In: Journal of Materials Research and Technology. 19.2022, July-August, p. 183-193 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  79. Published

    Modeling Asymmetric Flow in the Thin-Slab Casting Mold Under Electromagnetic Brake

    Vakhrushev, A., Kharicha, A., Karimi Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., May 2022, In: Steel research international. 93.2022, 5, 11 p., 2200088.

    Research output: Contribution to journal › Article › Research › peer-review

  80. Published

    Norton-Hoff model for deformation of growing solid shell of thin slab casting in funnel-shape mold

    Vakhrushev, A., Kharicha, A., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J. & Rodrigues, C. M. G., 23 Mar 2022, In: Journal of iron and steel research international. 29.2022, 1, p. 88-102 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  81. Published

    Modeling of the as-cast structure and macrosegregation in the continuous casting of a steel billet: Effect of M-EMS

    Zhang, Z., Wu, M., Zhang, H., Hahn, S., Wimmer, F., Ludwig, A. & Kharicha, A., Mar 2022, In: Journal of materials processing technology. 301.2022, March, 15 p., 117434.

    Research output: Contribution to journal › Article › Research › peer-review

  82. E-pub ahead of print

    Hydrodynamically driven facet kinetics in crystal growth

    Stefan-Kharicha, M., Kharicha, A., Zaidat, K., Reiss, G., Eßl, W., Goodwin, F., Wu, M., Ludwig, A. & Mugrauer, C., 31 Jan 2022, (E-pub ahead of print) In: Journal of crystal growth. 584.2022, 15 April, 8 p., 126557.

    Research output: Contribution to journal › Article › Research › peer-review

  83. 2021
  84. Published

    Rapid solidification and metastable phase formation during surface modifications of composite Al-Cr cathodes exposed to cathodic arc plasma

    Golizadeh Najafabadi, M., Mendez Martin, F., Wurster, S., Mogeritsch, J., Kharicha, A., Kolozsvári, S., Mitterer, C. & Franz, R., 20 Dec 2021, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 94:2021, 20 December, p. 147-163 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  85. Published

    Reverse flows and flattening of a submerged jet under the action of a transverse magnetic field

    Kharicha, A., Vakhrushev, A., Karimi Sibaki, E., Wu, M. & Ludwig, A., 9 Dec 2021, In: Physical review research. 6.2021, 12, 123701.

    Research output: Contribution to journal › Article › Research › peer-review

  86. Published

    Investigation of effect of electrode polarity on electrochemistry and magnetohydrodynamicsusing tertiary curent distribution in electroslag remelting process

    Karimi Sibaki, E., Kharicha, A., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., 6 Dec 2021, In: Journal of iron and steel research international. 28.2021, December, p. 1551-1561 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  87. E-pub ahead of print

    Mathematical Modeling of the Early Stage of Clogging of the SEN During Continuous Casting of Ti-ULC Steel

    Barati, H., Wu, M., Michelic, S., Ilie, S., Kharicha, A., Ludwig, A. & Kang, Y. B., 20 Oct 2021, (E-pub ahead of print) In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52.2021, 6, p. 4167-4178 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  88. Published

    A Numerical Study on the Influence of an Axial Magnetic Field (AMF) on Vacuum Arc Remelting (VAR) Process

    Karimi Sibaki, E., Kharicha, A., Abdi, M., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., Oct 2021, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52, 5, p. 3354-3362 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  89. Published

    Toward a Simplified Arc Impingement Model in a Direct-Current Electric Arc Furnace

    Al-Nasser, M., Kharicha, A., Barati, H., Pichler, C., Hackl, G., Gruber, M., Ishmurzin, A., Redl, C., Wu, M. & Ludwig, A., 17 Sept 2021, In: Metals. 11.2021, 9, 17 p., 1482.

    Research output: Contribution to journal › Article › Research › peer-review

  90. Published

    Modelling melting and grain destruction phenomena during globular equiaxed solidification

    Zhang, H., Wu, M., Schumacher, P., Gomes Rodrigues, C., Ludwig, A. & Kharicha, A., Sept 2021, In: Applied Mathematical Modelling. 97.2021, September, p. 821-838 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  91. Published

    On Modelling Parasitic Solidification Due to Heat Loss at Submerged Entry Nozzle Region of Continuous Casting Mold

    Vakhrushev, A., Kharicha, A., Wu, M., Ludwig, A., Tang, Y., Hackl, G., Nitzl, G., Watzinger, J. & Bohacek, J., 31 Aug 2021, In: Metals. 11.2021, 9, 20 p., 1375.

    Research output: Contribution to journal › Article › Research › peer-review

  92. Published

    Bridging Capillary-Driven Fragmentation and Grain Transport with Mixed Columnar-EquiaxedSolidification

    Gomes Rodrigues, C., Wu, M., Zhang, H., Ludwig, A. & Kharicha, A., 12 Aug 2021, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 52.2021, October, p. 4609–4622 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  93. Published

    Generation of Reverse Meniscus Flow by Applying An Electromagnetic Brake

    Vakhrushev, A., Kharicha, A., Karimi-Sibaki, E., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G., Watzinger, J. & Eckert, S., 6 Jul 2021, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 52.2021, 5, p. 3193-3207 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  94. Published

    Directional Solidification of AlSi7Fe1 Alloy Under Forced Flow Conditions: Effect of Intermetallic Phase Precipitation and Dendrite Coarsening

    Zhang, H., Wu, M., Gomes Rodrigues, C., Ludwig, A. & Kharicha, A., 10 May 2021, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 52.2021, July, p. 3007-3022 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  95. Published

    Hydrodynamically enhanced electrochemical mass transfer on the surface of an electrically conductive droplet

    Kharicha, A., Karimi Sibaki, E., Vakhrushev, A., Wu, M., Ludwig, A. & Bohacek, J., 9 Apr 2021, In: International journal of heat and mass transfer. 57.2021, 4, p. 1697-1705 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  96. Published

    Important Key Process Simulations in the Field of Steel Metallurgy

    Ludwig, A., Gomes Rodrigues, C., Zhang, Z., Zhang, H., Karimi Sibaki, E., Barati, H., Vakhrushev, A., Al Nasser, M., Wu, M. & Kharicha, A., 2021, In: Berg- und hüttenmännische Monatshefte : BHM. 167.2022, 1, p. 2-9 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  97. Published

    Influence of Dross Build-up Induced Roughness on Flow Structures and Heat-Transfer of Sink Rolls in Hot-dip Galvanizing Lines

    Reiss, G., Stefan-Kharicha, M., Kharicha, A., Trasca, R. A. (Co-editor), Mugrauer, C., Unger, H. (Co-editor) & Goodwin, F., 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  98. Published

    NUMERICAL SIMULATION OF BUILD-UP GROWTH COUPLED WITH HYDRODYNAMICS

    Stefan-Kharicha, M., Kharicha, A., Reiss, G., Eßl, W., Mugrauer, C., Goodwin, F., Wu, M., Ludwig, A. & Zaidat, K., 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  99. 2020
  100. Published

    Two-phase vicoplastic model for the simulation of twin roll casting

    Gomes Rodrigues, C., Ludwig, A., Wu, M., Kharicha, A. & Vakhrushev, A., 1 Dec 2020, In: Journal of materials processing technology. 286.2020, December, 9 p., 116814.

    Research output: Contribution to journal › Article › Research › peer-review

  101. Published

    Flow-solidification interaction: A numerical study on solidification of NH4Cl – 70 wt.%H2O solution in a water-cooled mould with a large sample thickness

    Wu, M., Stefan-Kharicha, M., Kharicha, A. & Ludwig, A., 15 Oct 2020, In: International journal of heat and mass transfer. 164.2021, January, 120566.

    Research output: Contribution to journal › Article › Research › peer-review

  102. Published

    Geometrical effect on macrosegregation formation during unidirectional solidification of Al–Si alloy

    Zhang, H., Wu, M., Tewari, S. N., Ludwig, A. & Kharicha, A., 24 Sept 2020, In: Journal of materials processing technology. 288.2021, February, 12 p., 116913.

    Research output: Contribution to journal › Article › Research › peer-review

  103. Published

    Electric Current Distribution During Electromagnetic Braking in Continuous Casting

    Vakhrushev, A., Kharicha, A., Liu, Z., Wu, M., Ludwig, A., Nitzl, G., Tang, Y., Hackl, G. & Watzinger, J., 2 Sept 2020, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 51.2020, 6, p. 2811-2828 18 p.

    Research output: Contribution to journal › Article › Research › peer-review

  104. Published

    Role of Solidification in Submerged Entry Nozzle Clogging During Continuous Casting of Steel

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 16 Jul 2020, In: Steel research international. 91.2020, 12, 9 p., 2000230.

    Research output: Contribution to journal › Article › Research › peer-review

  105. Published

    Impact of hydrodynamics on growth and morphology of faceted crystals

    Stefan-Kharicha, M., Kharicha, A., Zaidat, K., Reiss, G., Eßl, W., Goodwin, F., Wu, M., Ludwig, A. & Mugrauer, C., 1 Jul 2020, In: Journal of crystal growth. 541.2020, 1 July, 11 p., 125667.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 Next
View graph of relations

Contact

Phone: 3100

Latest Research Output

View more (305)