Montanuniversität

Organisational unit: University

601 - 650 out of 33,839Page size: 50

Research output

  1. 2024
  2. Published

    Numerical fatigue crack growth simulation considering crack closure and interaction effects

    Fladischer, S., 23 May 2024.

    Research output: Contribution to conference › Poster › Research

  3. Published

    Parameter Study for the Numerical Analysis of the Wire Arc Additive Manufacturing Process

    Czipin, M. & Stockinger, M. (Co-editor), 23 May 2024.

    Research output: Contribution to conference › Poster › Transfer

  4. Published

    Recycling of Paper Machine Clothing: ReFibreValue

    Duretek, I., 23 May 2024.

    Research output: Contribution to conference › Poster › Research

  5. Published

    Recycling of red mud from the aluminium industry

    Wibner, S., 23 May 2024.

    Research output: Contribution to conference › Poster › Research

  6. Published

    ReSoURCE: Refractory Sorting Using Revolutionizing Classification Equipment

    Friedrich, K., 23 May 2024, p. 5. 1 p.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    Textured surfaces in tribology: Surface modifications in full film and mixed lubrication

    Scharf, R., 23 May 2024.

    Research output: Contribution to conference › Poster › Research

  8. Published

    Additive Manufacturing Material Extrusion @ Institute of Polymer Processing: Alf³

    Schuschnigg, S., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  9. Published

    Additive Manufacturing of Aluminium by Material Extrusion MEX

    Momeni, V., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  10. Published

    Chemitecture: Dielectric Elastomer Actuator (DEA) produced by Material Extrusion (MEX)

    Raguz, I., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  11. Published

    Closing the circle of polyolefin packaging: Pack2Loop

    Krempl, N., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  12. Published

    E-Beam Treatment of Post Consumer Polymer Waste: Increasing the melt viscosity of post-consumer polypropylene

    Krämer, J., 22 May 2024.

    Research output: Contribution to conference › Poster › Research

  13. Published

    Extrusion and Additive Manufacturing@ Institute of Polymer Processing

    Schuschnigg, S., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  14. Published

    LightCycle: Upcycling of regenerates with a new Injection Moulding Compounder (IMC)

    Shahroodi, Z., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  15. Published

    Material Data Determination @ Institute of Polymer Processing

    Duretek, I., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  16. Published

    Projekt ReSoURCE - Refractory Sorting using Revolutionizing Classification Equipment

    Feucht, F., 22 May 2024.

    Research output: Contribution to conference › Poster › Research

  17. Published

    Recycling Biobased Plastics: C-PlaNet

    Main, P., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  18. Published

    Successful Integration of Circular Economy Concepts for the Extractive Industry

    Murphy, M., Obenaus-Emler, R. & Pacher, C., 22 May 2024, Circular Economy on Energy and Natural Resources Industries : New Processes and Applications to Reduce, Reuse and Recycle Materials and Decrease Greenhouse Gases Emissions. Mora, P. & Acien Fernandez, F. G. (eds.). Springer, p. 253-267 17 p. (Sustainable Development Goal Series).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Education › peer-review

  19. Published

    Wintersport Ressource Efficiency and Improved Circular Economy: WINTRUST

    Krempl, N., 22 May 2024. 1 p.

    Research output: Contribution to conference › Poster › Research

  20. Published

    Beyond Hot Air.

    Saxinger, G., Auer, M., Batterbury, S. P., Eyselein, G., Jensen, E. M., Kowasch, M., Melcher, F. & Wilson, E., 21 May 2024, Mining the connections.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Multi-proxy record of the Austrian Upper Triassic Polzberg Konservat-Lagerstätte in light of the Carnian Pluvial Episode

    Lukeneder, A., Lukeneder, P., Sachsenhofer, R., Roghi, G. & Rigo, M., 21 May 2024, In: Scientific reports (e-only). 14.2024, 1, 21 p., 11194.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Student perspectives on the Wolfsberg lithium project in Austria

    Kowasch, M., Baumann, C., Batterbury, S. P., Melcher, F., Saxinger, G. & Wilson, E., 21 May 2024, Mining the connections, Marrakech, 21-23 May 2024.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Time for green extractivism in the EU?

    Kowasch, M., Melcher, F., Auer, M., Batterbury, S. P., Eyselein, G., Lesser, P., Saxinger, G. & Wilson, E., 21 May 2024, Mining the connections, Marrakech, 21-23 May 2024.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Green and blue infrastructure as model system for emissions of technology-critical elements

    Trimmel, S., Spörl, P., Haluza, D., Lashin, N., Meisel, T. C., Pitha, U., Prohaska, T., Puschenreiter, M., Rückert, E., Spangl, B., Wiedenhofer, D. & Irrgeher, J., 20 May 2024, In: Science of the total environment. 934.2024, 15, 15 p., 173364.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Small-angle neutron scattering reveals high-density adsorbed hydrogen in carbon micropores at low pressures and supercritical temperature

    Stock, S., Seyffertitz, M., Kostoglou, N., Rauscher, M., Demé, B., Mitterer, C. & Paris, O., 20 May 2024.

    Research output: Contribution to conference › Poster › Research

  26. Published

    Bio-Based Backbone for Highly Reactive Metal Alloys Feedstocks for MEX

    Holzer, C., Momeni, V., Pöhle, G., Riecker, S., Schuschnigg, S. & Kukla, C., 19 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  27. E-pub ahead of print

    Magnetospheric Venus Space Explorers (MVSE) mission: A proposal for understanding the dynamics of induced magnetospheres

    Albers, R., Andrews, H., Boccacci, G., Castro Pires, V. D., Laddha, S., Lundén, V., Maraqten, N., Matias, J., Krämer, E., Schulz, L., Palanca, I. T., Teubenbacher, D., Baskevitch, C., Covella, F., Cressa, L., Moreno, J. G., Gillmayr, J., Hollowood, J., Huber, K. & Kutnohorsky, V. & 10 others, Lennerstrand, S., Malatinszky, A., Manzini, D., Maurer, M., Nidelea, D. M. A., Rigon, L., Sinjan, J., Suarez, C., Viviano, M. & Knutsen, E. W., 19 May 2024, (E-pub ahead of print) In: Acta astronautica. 221.2024, August, p. 194-205 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Simulation of the Melting Region in Additive Manufacturing Material Extrusion Dies for Highly Filled Feedstocks

    Schuschnigg, S., Hentschel, L. & Holzer, C., 19 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  29. Published

    Unlocking the Potential of Recycled Polypropylene in Food Packaging

    Krempl, N., Holzer, C., Pinter, E., Frühwirth, M., Shahroodi, Z., Jahn, E., Aschermayer, F. & Gabriel, V. H., 19 May 2024. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  30. Published

    Utilization of Charcoal Obtained from Woody Biomass in Metallurgical Processes Based on Solid–Gas Reactions

    Dornig, C., Hanke, G. & Antrekowitsch, J., 18 May 2024, In: Metals. 14.2024, 5, 13 p., 592.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Modeling solute drag during austenite–ferrite transformation with ab initio binding energies

    Bloder, B. F., Scheiber, D., Raninger, P., Ecker, W. & Antretter, T., 17 May 2024, In: Materialia. 36.2024, August, 9 p., 102128.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Thermal treatment of rock phosphate: Phosphorus recovery and production of an alternative binder component

    Gatschlhofer, C., Krammer, A., Doschek-Held, K., Steindl, F. R., Vallazza-Grengg, C. & Raupenstrauch, H., 16 May 2024.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Aus dem ÖWAV-Präsidium: Abfallwirtschaftstagung 2024 in Wien - in der Kreislaufwirtschaft angekommen!

    Pomberger, R., 15 May 2024, In: Österreichische Wasser- und Abfallwirtschaft : ÖWAW . 76.2024, 5-6, p. 213 1 p.

    Research output: Contribution to journal › Letter

  34. Published

    Empowering the Regional Network of Experts for Disaster Risk Management in the Western Balkans by the Scientific-Professional Society for Disaster Risk Management

    Cvetković, V. M., 15 May 2024

    Research output: Other contribution › Research

  35. Published

    Feasibility study on the production of low melt flow rate recycled polypropylene from postconsumer waste

    Geier, J., Barretta, C., Hinczica, J., Haar, B., Bredács, M., Witschnigg, A., Mayrbäurl, E. & Oreski, G., 15 May 2024, In: Journal of applied polymer science. 141.2024, 30, 14 p., e55694.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Recovery of plastic packaging from mixed municipal solid waste. A case study from Austria

    Blasenbauer, D., Lipp, A.-M., Fellner, J., Tischberger-Aldrian, A., Stipanovic, H. & Lederer, J., 15 May 2024, In: Waste management. 180.2024, 15 May, p. 9-22 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. E-pub ahead of print

    Increasing the melt viscosity of post-consumer recycled polypropylene via E-Beam techniques

    Krämer, J., Guedes de la Cruz, G. D. C., Kern, W., Roitner, J., Witschnigg, A., Rittmannsberger, F. & Schnetzinger, K., 14 May 2024, (E-pub ahead of print) In: Radiation physics and chemistry. 222.2024, September, 6 p., 111846.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Seismic Hazard Resilience in Montenegro: A Comprehensive Qualitative Analysis of Local Preparedness and Response Mechanisms

    Cvetković, V. M., Grozdanić, G., Milanović, M., Marković, S. & Lukić, T., 14 May 2024

    Research output: Other contribution › Research

  39. Published

    In-Depth Analysis of Disaster (Risk) Management System in Serbia: A Critical Examination of Systemic Strengths and Weaknesses

    Cvetković, V. M., 13 May 2024

    Research output: Other contribution › Research

  40. Published

    Multimethod cross-sectional characterization approaching the limits of diamond monophase multilayers

    Meindlhumer, M., Grau, J., Sternschulte, H., Halahovets, Y., Siffalovic, P., Burghammer, M., Steinmüller-Nethl, D. & Keckes, J., 13 May 2024, In: Materials characterization. 212.2024, June, 15 p., 113973.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Influence of deformation, microstructure, and temperature on the fracture resistance of technically pure tungsten

    Gludovatz, B., Wurster, S., Hohenwarter, A., Hoffmann, A. & Pippan, R., 11 May 2024, In: Materials Science and Engineering: A. 902.2024, June, 11 p., 146631.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Constraining the stress field and its variability at the BedrettoLab: Elaborated hydraulic fracture trace analysis

    Bröker, K., Ma, X., Zhang, S., Doonechaly, N. G., Hertrich, M., Klee, G., Greenwood, A., Caspari, E. & Giardini, D., 10 May 2024, In: International Journal of Rock Mechanics and Mining Sciences. 178.2024, June, 17 p., 105739.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Raman Spectroscopy of carbonaceous material thermometry in the Carnic Alps (Austria, Italy)

    Rantitsch, G., 10 May 2024, In: Austrian journal of earth sciences. 117.2024, 1, p. 73-86 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Impact of thermal soil treatment on heavy metal mobility in the context of waste management

    Vollprecht, D., Sattler, T. M., Kern, J., Berrer, I. & Pomberger, R., 9 May 2024, In: Waste management & research. 42.2024, 9, p. 832 - 841 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Cu-doped perovskite-type oxides: A structural deep dive and examination of their exsolution behaviour influenced by B-site doping

    Berger, T., Drexler, H., Ruh, T., Lindenthal, L., Schrenk, F., Bock, J., Rameshan, R., Föttinger, K., Irrgeher, J. & Rameshan, C., 8 May 2024, In: Catalysis today. 437.2024, 1 July, p. 1 15 p., 114787.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Effect of mechanical recycling on short glass fibre reinforced polyamide 6,6 from post-industrial waste

    Salvi, A., Lucyshyn, T., Marano, C., Ostrowska, M., Vangosa, F. B., Dotelli, G. & Holzer, C., 8 May 2024, In: AIP Conference Proceedings. 3158, 1, 120005.

    Research output: Contribution to journal › Conference article › peer-review

  47. Published

    Multi-Material Implant Structures with Medical-Grade Polyurethane via Additive Manufacturing

    Hentschel, L., Petersmann, S., Gradischar, A., Lebschy, C., Lindenmann, J., Smolle-Juettner, F., Gonzalez-Gutierrez, J., Dias, A., Kynast, F., Hammer, N., Schäfer, U. & Holzer, C., 8 May 2024, In: AIP Conference Proceedings. 3158, 1, 150005.

    Research output: Contribution to journal › Conference article › peer-review

  48. Published

    Thermodynamic Information and Evaporation Mechanism of Fe-M-C-S (M = As, Cu, Pb, Sb, Sn) Alloys for Controlling Tramp Elements in Steel

    Park, W.-B., Bernhard, M. C., Jung, C. & Kang, Y.-B., 8 May 2024, Proceedings of AISTech 2024, Columbus, Ohio, US.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Microstructure Evolution and Mechanical Properties at Ambient and Elevated Temperatures of in-situ TiB2/2219Al Matrix Composites During Cold Rolling

    Li, L., Zhou, D., Wei, C., Han, Z., LI, J., Kang, H., Guo, E., Zhang, Y., Chen, Z. & Wang, T., 7 May 2024, In: Metals and materials international. 30.2024, 10, p. 2791-2807 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. E-pub ahead of print

    Morphological structure and mechanical properties of a nucleated Polyoxymethylene (POM) homopolymer resin processed under conventional injection molding conditions

    Schrank, T., Ramoa, B., Feuchter, M., Pinter, G., Pantani, R. & Berer, M., 7 May 2024, (E-pub ahead of print) In: Polymer Testing. 134.2024, May, 13 p., 108444.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Simulation of Secondary Metallurgical Processes by Using Computational Thermodynamics and Comprehensive Statistical Learning Methods

    Kavic, D., Bernhard, M. C., Rössler, R. & Bernhard, C., 7 May 2024, Proceedings of AISTech 2024, Columbus, Ohio, US.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...9 10 11 12 13 14 15 16 ...677 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
Austria
  • Main phone number: +43 3842 402