Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

4051 - 4100 out of 4,192Page size: 50

Research output

  1. 2005
  2. Published

    Umsatzabhängigkeit von Reinharz-Schlüsseleigenschaften

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  3. Published

    Untersuchung der Abformgüte unterschiedlicher Oberflächenstrukturen beim Spritzgießen von PP und PC unter Variation der Prozessparameter

    Hödl, H. M., 2005, 131 p.

    Research output: Thesis › Diploma Thesis

  4. Published

    Untersuchungen an Nutverschlusskeilen

    Major, Z. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  5. Published

    Untersuchungen zu thermischen Ausdehnungs-koeffizienten und zur Nachkristallisation von PP-Formulierungen

    Balika, W. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  6. Published

    Verfahren zur Herstellung eines vernetzten Elastomers

    Temel, A. (Inventor), Kern, W. (Inventor), Stelzer, F. (Inventor), Ehrenfeldner, R. (Inventor), Holzner, A. (Inventor), Schaller, R. (Inventor) & Höchtl, M. (Inventor), 2005, Patent No. A 1491/2005

    Research output: Patent

  7. Published

    Weathering of Commercial Greenhouse Films - Investigation of Aging Behaviour

    Oreski, G., Wallner, G., Eder, R. & Krasser-Lamik, R., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  8. Published

    Werkstoffdatenblätter für Epoxidharzformulierungen

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    Werkstoffvorauswahl und Charakterisierung von Werkstoffen für neuartige Federkomponenten in Lautsprechern

    Balika, W. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  10. Published

    Werkstoffvorauswahl und Charakterisierung von Werkstoffen für neuartige Federkomponenten in Lautsprechern (Phase II: Charakterisierung von ausgewählten Werkstoffen)

    Balika, W. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    Zugeigenschaften von gehärteten Epoxidharzen

    Pilz, G., Wolfahrt, M. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  12. Published

    Zugprüfungen an GFK-Kettenelementen

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Zugprüfungen an Polyazetal (POM)-Ketten

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    Zugprüfungen an Polyoxymethylen (POM)-Ketten

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  15. Published

    Zugprüfungen an PP-und POM-Kettenelementen des Typs Rübig 50

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Zugversuch an einem Composite - Bauteil IP 980 flange test

    Pinter, G. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    Zugversuche an Proben aus stumpfgeschweißten Polyethylenrohren nach EN 12814-2

    Haager, M. J. & Lang, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Zur rechnerischen Ermittlung der Schubspannungsverteilungen infolge Querkraft und Torsion von homogenen oder inhomogenen, isotropen oder anisotropen dünnwandigen Balken beliebiger Querschnittsform

    Karall, T., 2005, 224 p.

    Research output: Thesis › Doctoral Thesis

  19. 2004
  20. Published

    Estimation of slow crack growth behavior in polyethylene after stepwise isothermal crystallization

    Haager, M., Pinter, G. & Lang, R. W., Oct 2004, In: Macromolecular Symposia. 217, p. 383-390 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    3D-Bauteilvermessung im Spritzguss-Werkzeugbau

    Lucyshyn, T., Fischer, K. & Langecker, G., 2004, In: VLK-News. p. 8-11

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    A fatigue approach for lifetime prediction of PE-HD pipe grades

    Balika, W., Pinter, G., Choi, B.-H. & Lang, R., 2004, Society of Plastics Engineers. p. 4028-4032

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Aktuelles aus Wissenschaft und Forschung - Kunststoffrohre 2004: 18. Leobener Kunststoffkolloquium

    Pinter, G. (Editor) & Lang, R. (Editor), 2004, Leoben: Eigenverlag.

    Research output: Book/Report › Anthology › Research

  24. Published

    Applicability and limitations of the FNCT-methodology to predict the long term failure behavior of polyethylene-pipe materials

    Haager, M., Pinter, G. & Lang, R. W., 2004, p. 4023-4027. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  25. Published

    Applicability and limitations of the FNCT-methodology to predict the long term failure behaviour of polyethylene pipe materials

    Haager, M. J., Pinter, G. & Lang, R., 2004, Society of Plastics Engineers. p. 4023-4027

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Applicability of linear elastic fracture mechanics to fatigue in amorphous and semi-crystalline polymers

    Lang, R., Balika, W. & Pinter, G., 2004, The Application of Fracture Mechanics to Polymers, Adhesvies and Composites. p. 83-92

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  27. Published

    Beschleunigte Prüfmethoden zur Charakterisierung des Langzeitversagensverhaltens von thermoplastischen Rohrwerkstoffen

    Haager, M. J., Pinter, G. & Lang, R., 2004, Aktuelles aus Wissenschaft und Forschung - Kunststoffrohre 2004. Polymer Competence Center Leoben, Institut für Werkstoffkunde und -prüfung der Kunststoffe, p. VI-1-VI-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Characterisation of the fatigue behaviour of RTM-laminates by isocyclic stress-strain diagrams

    Ladstätter, E., Pinter, G., Billinger, W. & Lang, R., 2004, Society of Plastics Engineers. p. 1379-1383

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Characterization of the fatigue behavior of RTM-laminates by isocyclic stress-strain diagrams

    Ladstätter, E., Pinter, G., Billinger, W. & Lang, R. W., 2004, p. 1379-1383. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  30. Published

    Characterizsation of Table Tennis Racket Sandwich Rubbers

    Major, Z. & Lang, R., 2004, 8th Internationale Table Tennis Federation Sports Science Congress and the 3rd Qorld Congress of Science and Racket Sports. p. 146-151

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Creep crack growth in high density polyethylene

    Pinter, G. & Lang, R., 2004, The Application of Fracture Mechanics to Polymers, Adhesvies and Composites. p. 49-54

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  32. Published

    Ermüdungsrisswachstum in PE-Rohrwerkstoffen

    Haager, M. J., Pinter, G. & Lang, R., 2004, In: 3 R international. p. 492-496

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Ermüdungsverhalten karbonfaserverstärkter RTM-Laminate

    Ladstätter, E., Pinter, G., Billinger, W. & Lang, R., 2004, Int. Conference, European Chapter. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Estimation of slow crack growth behavior in Polyethylen after stepwise isothermal segregation

    Haager, M. J., Pinter, G. & Lang, R., 2004, In: Macromolecular Symposia. 217, p. 383-390

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Investigation of heat dissipation of RTM laminates under tensile fatigue loading by thermography

    Leitao, T. I. V., Steinberger, R., Ladstätter, E., Pinter, G., Billinger, W. & Lang, R., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. Published

    Investigations of the crack tip deformation zone in polyethylene pipe materials using scanning small angle X-ra scattering (sSAXS)

    Maier, G., Pinter, G. & Fratzl, P., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Local deformation and failure at crack tips in thermoplastic pipe grades

    Pinter, G., Balika, W. & Lang, R., 2004, Aktuelles aus Wissenschaft und Forschung - Kunststoffrohre 2004. Polymer Competence Center Leoben, Institut für Werkstoffkunde und -prüfung der Kunststoffe, p. IX-1-IX-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Moderne Prüfmethoden für Polyethylen-Rohrwerkstoffe

    Haager, M. J., Pinter, G. & Lang, R., 2004, In: VLK-News. p. 2-3

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Ranking of PE-HD pipe grades by fatigue crack growth performance

    Pinter, G., Haager, M. J., Balika, W. & Lang, R., 2004, Plastics Pipes XII. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Rate dependent fracture of polymers - applicability and limitation of force based fracture mechanics approaches

    Major, Z. & Lang, R., 2004, The Application of Fracture Mechanics to Polymers, Adhesvies and Composites. p. 39-46

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  41. Published

    Rheological Characterization of Extrudable Wood/Melamine Resin Composites

    Müller, U., Nguyen, H. L., Rätzsch, M., Duretek, I. & Friesenbichler, W., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Size-Exclusion Chromatography of Polymers of Ultra-high Molar Mass

    Aust, N., Parth, M. & Lederer, K., 2004.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Thermo-oxidative degradation during creep crack growth of PE-HD grades as assessed by FT-IR spectroscopy

    Pinter, G., Haager, M. J., Wolf, C. & Lang, R., 2004, In: Macromolecular Symposia. 217, p. 307-316

    Research output: Contribution to journal › Article › Research › peer-review

  44. 2003
  45. Published

    1.Leobener Symposium POLYMER SOLAR MATERIALS am 06. und 7. November 2003 im Congress Leoben

    Wallner, G., 2003, In: VLK-News. p. 11-16

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Advanced methodologies for the characterisation of the performance of long-term thermal antioxidants

    Pinter, G. & Lang, W. R., 2003, p. 124-128. 5 p.

    Research output: Contribution to conference › Paper › peer-review

  47. Published

    Advanced methodologies for the characterization of the performance of long-term thermal antioxidants

    Pinter, G. & Lang, R., 2003, 3. European Additives and Colors Conference. p. 124-128

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Application of size-exclusion chromatography to polymers of ultra-high molar mass

    Aust, N., 2003, In: Journal of biochemical and biophysical methods. 56, p. 323-323

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    By-Pass-Extrusionsrheometer - Bestimmung des Fließverhaltens von PVC-U Compounds

    Duretek, I. & Langecker, G., 2003, In: VLK-News. p. 33-37

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Effect of stabilization on creep crack growth in High-Density Polyethylene

    Pinter, G. & Lang, R., 2003, In: Journal of Applied Polymer Science. 90, p. 3191-3207

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Ein Kunststofffenster zeigt Profil. Thermische und mechanische Optimierung eines Fensterrahmens

    Wörndle, R., Fritz, M., Neumeyer, [. V. & Kitzmüller, [. V., 2003, In: Kunststoffe. p. 4-8

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Einsatz von statischen und zyklischen bruchmechanischen Methoden zur Charakterisierung von Polyethylen Rohrleitungswerkstoffen

    Haager, M. J., Pinter, G., Fanesi, E. & Lang, R., 2003, 6. Bregenzer Rohrleitungstage – Fachausstellung. p. 1-16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  53. Published

    Estimation of slow crack growth behaviour in Polyethylene after stepwise isothermal segregation

    Haager, M. J., Pinter, G. & Lang, R., 2003.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1...78 79 80 81 82 83 84 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301