Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

251 - 300 out of 4,192Page size: 50

Research output

  1. 2023
  2. Published

    Effects of Different Polypropylene (PP)-Backbones in Aluminium Feedstock for Fused Filament Fabrication (FFF)

    Momeni, V., Shahroodi, Z., Gonzalez-Gutierrez, J., Hentschel, L., Duretek, I., Schuschnigg, S., Kukla, C. & Holzer, C., 11 Jul 2023, In: Polymers. 15.2023, 4, 18 p., 3007.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Study of a novel curved single lap joint concept with non-uniform adhesive thickness: Master thesis in Mechanical Engineering

    Pires, V. D. C., 5 Jul 2023

    Research output: Thesis › Doctoral Thesis

  4. Published

    Fatigue Behavior of Elastomeric Components: A Review of the Key Factors of Rubber Formulation, Manufacturing, and Service Conditions

    Gehling, T., Schieppati, J., Balasooriya, W., Kerschbaumer, R. C. & Pinter, G. G., 3 Jul 2023, In: Polymer reviews. 63.2023, 3, p. 763-804 42 p.

    Research output: Contribution to journal › Review article › peer-review

  5. Published

    Bioinspired fracture toughness enhancement of a fully bio-based epoxy resin

    Schwaiger, M., Waly, C., Huszar, M., Oreski, G., Feuchter, M., Arbeiter, F. & Resch-Fauster, K., Jul 2023, In: Polymer Testing. 124.2023, July, 10 p., 108098.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Hydrogen Evolution Reaction on Ultra-Smooth Sputtered Nanocrystalline Ni Thin Films in Alkaline Media—From Intrinsic Activity to the Effects of Surface Oxidation

    Neumüller, D., Rafailović, L. D., Jovanović, A. Z., Skorodumova, N. V., Pašti, I. A., Lassnig, A., Grießer, T., Gammer, C. & Eckert, J., Jul 2023, In: Nanomaterials. 13.2023, 14, 18 p., 2085.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    3D Printing of Covalent Adaptable Networks: Overview, Applications and Future Prospects

    Bijalwan, V., Rana, S., Singh, H. K., Yun, G. J., Jamil, M. & Schlögl, S., 30 Jun 2023, (E-pub ahead of print) In: Polymer reviews. 64.2024, 1, p. 36-79 44 p.

    Research output: Contribution to journal › Review article › peer-review

  8. Published

    Additive Printing of Thermally Cured Two-Component Epoxy: A Route to Mesoscale Structuring for Improved Ductility

    Krawczyk, K., Wheeldon, A., Kamble, M., Popovic, K., Patter, P., Postl, M., Belegratis, M., Sieberer, M., Bandl, C., Kern, W., Constantinescu, D. M., Baciu, F., Stochioiu, C., Apostol, D. A. & Picu, C. R., 30 Jun 2023, In: ACS applied polymer materials. 5.2023, 7, p. 4859-4867 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Surface-Initiated Polymerizations Mediated by Novel Germanium-Based Photoinitiators

    Müller, M., Drusgala, M., Fischer, R. C., Torvisco, A., Kern, W., Haas, M. & Bandl, C., 23 Jun 2023, In: ACS Applied Materials and Interfaces. 15.2023, 26, p. 31836-31848 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  10. E-pub ahead of print

    Effect of recycled material on failure by slow crack growth in multi-layer polyethylene pipes

    Trávníček, L., Poduška, J., Messiha, M., Arbeiter, F., Pinter, G. G., Náhlík, L. & Hutař, P., 14 Jun 2023, (E-pub ahead of print) In: Engineering Fracture Mechanics. 289.2023, 1 September, 18 p., 109423.

    Research output: Contribution to journal › Article › Research › peer-review

  11. E-pub ahead of print

    Digital light processing 3D printing of dynamic magneto-responsive thiol-acrylate composites

    Cazin, I., Rossegger, E., Roppolo, I., Sangermano, M., Granitzer, P., Rumpf, K. & Schlögl, S., 9 Jun 2023, (E-pub ahead of print) In: RSC Advances. 13.2023, 26, p. 17536-17544 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Spatially resolved photoactivation of dynamic exchange reactions in 3D-printed thiol-ene vitrimers

    Reisinger, D., Hellmayr, A., Paris, M., Haas, M., Grießer, T. & Schlögl, S., 7 Jun 2023, In: Polymer Chemistry. 14.2023, 26, p. 3082-3090 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Identifying active and degraded phenolic antioxidants in aged PE with IR-microscopy

    Bredács, M., Kanatschnig, E. E., Frank, A., Oreski, G., Pinter, G. G. & Gergely, S., Jun 2023, In: Polymer Degradation and Stability. 212.2023, June, 13 p., 110345.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    The effect of residual polyethylene on mechanical and rheological properties of recycled Polypropylene

    Shahroodi, Z., 25 May 2023, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Wear phenomenon in injection molding

    Zidar, D., Friesenbichler, W. & Blutmager, A., 23 May 2023, In: AIP Conference Proceedings. 2607.2023, 1, 6 p., 040003.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Amino Acid-Based Polyphosphorodiamidates with Hydrolytically Labile Bonds for Degradation-Tuned Photopolymers

    Haudum, S., Lenhart, S., Müller, S. M., Tupe, D., Naderer, C., Dehne, T., Sittinger, M., Major, Z., Grießer, T., Brüggemann, O., Jacak, J. & Teasdale, I., 9 May 2023, In: ACS Macro Letters. 12.2023, 6, p. 673-678 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    The effect of photolatent catalysts on the exchange kinetics of dual-wavelength 3D printable and photopatternable thiol-click vitrimers

    Rossegger, E., Shaukat, U., Moazzen, K., Fleisch, M., Berer, M. & Schlögl, S., 2 May 2023, In: Polymer Chemistry. 14.2023, 21, p. 2640-2651 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Pack2theLoop – Gemeinsam zum geschlossenen Kreislauf für Polyolefin Verpackungen

    Jahn, E., Fajtak, A., Bichler, L., Schlossnikl, J., Archodoulaki, M. V., Pinter, E., Krempl, N. & Eder, A., 1 May 2023, In: Pack & Log – die Fachzeitschrift für Verpackung & Intralogistik. 2023, 05, p. 12-13 2 p.

    Research output: Contribution to journal › Article › Research

  19. Published

    Current challenges in NdFeB permanent magnets manufacturing by Powder Injection Molding (PIM): A review

    Crozier-Bioud, T., Momeni, V., Gonzalez-Gutierrez, J., Kukla, C., Luca, S. & Rolere, S., May 2023, In: Materials today. Physics. 34.2023, May, 13 p., 101082.

    Research output: Contribution to journal › Review article › peer-review

  20. Published

    Resin avatar for Industry 4.0

    Lira, C., Etchells, M., Wolfahrt, M., Fauster, E., Daforno, R. & Koorevaar, A., May 2023.

    Research output: Contribution to conference › Abstract › peer-review

  21. Published

    Resin avatar for Industry 4.0

    Lira, C., Etchells, M., Wolfahrt, M., Fauster, E., Daforno, R. & Koorevaar, A., May 2023.

    Research output: Contribution to conference › Presentation › Research

  22. Published

    X-ray Photoelectron spectroscopy (XPS) – A powerful surface characterization technique

    Bandl, C., May 2023, BOOK OF ABSTRACTS - Junganalytiker*innenforum 2023 / Young analytical scientist’s forum 2023.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. E-pub ahead of print

    Evaluation of combinatorial algorithms for optimizing highly nonlinear structural problems

    Rettl, M., Pletz, M. & Schuecker, C., 28 Apr 2023, (E-pub ahead of print) In: Materials and Design. 230.2023, June, 15 p., 111958.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Multifunctional Ti3AlC2-Based Composites via Fused Filament Fabrication and 3D Printing Technology

    Liu, D., Hentschel, L., Lin, G., Kukla, C., Schuschnigg, S., Ma, N., Wallis, C., Momeni, V., Kitzmantel, M. & Sui, G., 25 Apr 2023, In: Journal of Materials Engineering and Performance. 32.2023, 20, p. 9174-9181 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. E-pub ahead of print

    Crosslinking of XNBR latex with multifunctional epoxides: An energy-efficient curing strategy for the fabrication of accelerator-free rubber gloves

    Grabmayer, T., Manhart, J. C., Kaiser, S., Schaller, R., Holzner, A. & Schlögl, S., 19 Apr 2023, (E-pub ahead of print) In: Journal of applied polymer science. 140.2023, 25, 12 p., e53973.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Parameter Study on Force Curves of Assembled Electronic Components on Foils during Injection Overmolding Using Simulation

    Hubmann, M., Bakr, M., Groten, J., Pletz, M., Vanfleteren, J., Bossuyt, F., Madadnia, B. & Stadlober, B., 19 Apr 2023, In: Micromachines. 14.2023, 4, 15 p., 876.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    RTMsim - A Julia module for filling simulations in Resin Transfer Moulding with the Finite Area Method

    Obertscheider, C. & Fauster, E., 15 Apr 2023, In: The journal of open source software. 8.2023, 8 p., 4763.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Surface Functionalization of (Pyrolytic) Carbon: An Overview

    Pustahija, L. & Kern, W., 10 Apr 2023, In: C – journal of carbon research. 9.2023, 2, 35 p., 38.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Determination of Material Data for one PA66-GF30 (Badamid A70 GF30 HH E) for injection moulding simulation

    Duretek, I., 4 Apr 2023, 19 p.

    Research output: Book/Report › Commissioned report › Research

  30. Published

    Comparing crack density and dissipated energy as measures for off-axis damage in composite laminates

    Drvoderic, M., Gfrerrer, M., Wiener, J., Pinter, G. G., Pletz, M. & Schuecker, C., Apr 2023, In: International Journal of Fatigue. 169.2023, April, 10 p., 107486.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Exploring Aromatic S-Thioformates as Photoinitiators

    Rieger, P., Pueschmann, S., Haas, M., Schmallegger, M., Guedes de la Cruz, G. D. C. & Grießer, T., Apr 2023, In: Polymers. 15.2023, 7, 8 p., 1647.

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Stretch-Steering of Aligned Discontinuous Fiber Tapes on Highly Curved Paths using Automated Fiber Placement

    Legenstein, A., Füssel, L., Tierney, J., Gillespie Jr., J. W., Heider, D. & Cender, T., Apr 2023, p. 992-1005. 13 p.

    Research output: Contribution to conference › Paper › peer-review

  33. E-pub ahead of print

    In-line and off-line NDT defect monitoring for thermoplastic automated tape layup

    Yadav, N., Oswald-Tranta, B., Gürocak, M., Galic, A., Adam, R. & Schledjewski, R., 31 Mar 2023, (E-pub ahead of print) In: NDT and E international. 137.2023, July, 8 p., 102839.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    The effect of HPAM polymer for enhanced oil recovery on corrosion behaviour of a carbon steel and interaction with the inhibitor under simulated brine conditions

    Moshtaghi, M., Eskinja, M., Mori, G. K., Grießer, T., Safyari, M. & Cole, I., 22 Mar 2023, In: Corrosion science. 217.2023, June, 20 p., 111118.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Influence of Injection Molding Parameters on the Peel Strength between Plasma-Treated Fluoropolymer Films and Polycarbonate

    Hubmann, M., Groten, J., Pletz, M., Grießer, T., Plevová, K., Nemitz, W. & Stadlober, B., 21 Mar 2023, In: Polymers. 15.2023, 6, 19 p., 1568.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Tailoring the optical and UV reflectivity of CFRP-epoxy composites: Approaches and selected results

    Haiden, L., Brunner, A. J., Pansare, A. V., Feuchter, M. & Pinter, G. G., 20 Mar 2023, In: Science and Engineering of Composite Materials. 30.2023, 1, 12 p., 20220175.

    Research output: Contribution to journal › Article › Research › peer-review

  37. E-pub ahead of print

    Chiral-based mechanical metamaterial with tunable normal-strain shear coupling effect

    Fleisch, M., Thalhamer, A., Meier, G., Huber, P., Fuchs, P., Pinter, G. G., Schlögl, S. & Berer, M., 15 Mar 2023, (E-pub ahead of print) In: Engineering Structures. 284.2023, 1 June, 15 p., 115952.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Investigation of the Mechanical Properties of Sandwich Composite Panels Made with Recyclates and Flax Fiber/Bio-Based Epoxy Processed by Liquid Composite Molding

    Ravindran, B., Feuchter, M. & Schledjewski, R., 15 Mar 2023, In: Journal of composites science. 7.2023, 3, 16 p., 122.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Thermally Latent Bases in Dynamic Covalent Polymer Networks and their Emerging Applications

    Reisinger, D., Kriehuber, M. U., Bender, M., Bautista-Anguís, D., Rieger, B. & Schlögl, S., 14 Mar 2023, In: Advanced materials. 35.2023, 24, 27 p., 2300830.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Effects of simulated body fluid on the mechanical properties of polycarbonate polyurethane produced via material jetting

    Petersmann, S., Huemer, M., Hentschel, L. & Arbeiter, F., 6 Mar 2023, In: Polymer Testing. 120.2023, March, 10 p., 107977.

    Research output: Contribution to journal › Article › Research › peer-review

  41. E-pub ahead of print

    Soft dielectric actuator produced by multi-material fused filament fabrication 3D printing

    Raguž, I., Berer, M., Fleisch, M., Holzer, C., Brancart, J., Vanderborght, B. & Schlögl, S., 6 Mar 2023, (E-pub ahead of print) In: Polymers for Advanced Technologies. 34.2023, 6, p. 1967-1978 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Sustainable Bio-Based UV-Cured Epoxy Vitrimer from Castor Oil

    Bergoglio, M., Reisinger, D., Schlögl, S., Grießer, T. & Sangermano, M., 18 Feb 2023, In: Polymers. 15.2023, 4, 12 p., 1024.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Accelerated Thermo-Catalytic Degradation of Perfluoropolyether (PFPE) Lubricants for Space Applications

    Gleirscher, M., Wolfberger, A., Schlögl, S., Hołyńska, M. & Hausberger, A., 14 Feb 2023, In: Lubricants. 11.2023, 2, 15 p., 81.

    Research output: Contribution to journal › Article › Research › peer-review

  44. E-pub ahead of print

    Implementation of thermo-responsive polymer coatings for an early warning against critical temperature states of thermo-sensitive electronic devices with metal oxide (MOx) gas sensors

    Bautista-Anguís, D., Wolfberger, A., Rabe, M., Tomaszczyk, S. & Schlögl, S., 14 Feb 2023, (E-pub ahead of print) In: Progress in organic coatings. 178.2023, May, 11 p., 107444.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Corrigendum to “Personalised urethra pessaries prepared by material extrusion-based additive manufacturing” [Int. J. Pharm. 608 (2021) 121112] (International Journal of Pharmaceutics (2021) 608, (S0378517321009182), (10.1016/j.ijpharm.2021.121112))

    Spörk, M., Arbeiter, F., Koutsamanis, I., Cajner, H., Katschnig, M. & Eder, S., 25 Jan 2023, In: International Journal of Pharmaceutics. 631.2023, 25 January, 1 p., 122548.

    Research output: Contribution to journal › Comment/debate › peer-review

  46. Published

    A pyrrole–carbazole photoinitiator for radical and cationic visible light LED photopolymerization

    Li, Y., Shaukat, U., Schlögl, S., Xue, T., Li, J., Nie, J. & Zhu, X., 3 Jan 2023, In: European polymer journal. 182.2023, 3 January, 7 p., 111700.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Material extrusion-based additive manufacturing of polyetheretherketone cranial implants: Mechanical performance and print quality

    Petersmann, S., Smith, J. A., Schäfer, U. & Arbeiter, F., Jan 2023, In: Journal of Materials Research and Technology. 22.2023, January-February, p. 642-657 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Research Progress on Low-Pressure Powder Injection Molding

    Momeni, V., Hufnagl, M., Shahroodi, Z., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C. & Holzer, C., Jan 2023, In: Materials. 16.2023, 1, 44 p., 379.

    Research output: Contribution to journal › Review article › peer-review

  49. Published

    Wavelength Selective Multi-Material 3D Printing of Soft Active Devices Using Orthogonal Photoreactions

    Rossegger, E., Strasser, J., Höller, R., Fleisch, M., Berer, M. & Schlögl, S., Jan 2023, In: Macromolecular rapid communications. 44.2023, 2, 9 p., 2200586.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    3D Printed Device for Avoiding Hand Contact with Shared Surfaces: The Handgenic

    Pais, A. I., Ferreira, C., Pires, V., Silva, V., Alves, J. L., Bastos, J. A. & Belinha, J., 2023, Proceedings of the 10th Congress of the Portuguese Society of Biomechanics, CNB 2023. Martins Amaro, A., Roseiro, L., Messias, A. L., Gomes, B., Almeida, H., António Castro, M., António Castro, M., Neto, M. A., de Fátima Paulino, M. & Maranha, V. (eds.). p. 3-15 13 p. (Lecture Notes in Bioengineering).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Advancing Industry 4.0: AI-Enhanced In-Line MIMO Quality Control for Piano-Black Curved Plastic Injection Molded Parts with OPC UA Integration

    Saeidi Aminabadi, S., 2023

    Research output: Thesis › Doctoral Thesis

Previous 12 3 4 5 6 7 8 9 ...84 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301