Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

201 - 250 out of 4,192Page size: 50

Research output

  1. 2023
  2. Published

    Plasma Processing and Treatment of 2D Transition Metal Dichalcogenides: Tuning Properties and Defect Engineering

    Sovizi, S., Angizi, S., Alem, S., Goodarzi, R., Boyuk, M. R. R. T., Ghanbari, H., Szoszkiewicz, R., Simchi, A. & Kruse, P., 4 Dec 2023, In: Chemical reviews. 2023, 24, p. 13869–13951 83 p.

    Research output: Contribution to journal › Review article › peer-review

  3. Published

    A black-box optimization strategy for customizable global elastic deformation behavior of unit cell-based tri-anti-chiral metamaterials

    Thalhamer, A., Fleisch, M., Schuecker, C., Fuchs, P. F., Schlögl, S. & Berer, M., Dec 2023, In: Advances in Engineering Software. 186.2023, December, 19 p., 103553.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Determination of creep crack growth kinetics of ABS via the C* approach at different temperatures

    Wainstein, J., Wiener, J., Arbeiter, F. & Frontini, P. M., Dec 2023, In: Results in Engineering. 20.2023, December, 9 p., 101481.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Investigating the Aging Behavior of High-Density Polyethylene and Polyketone in a Liquid Organic Hydrogen Carrier

    Surisetty, J. S. S., Sharifian, M., Lucyshyn, T. & Holzer, C., 15 Nov 2023, In: Polymers. 15.2023, 22, 14 p., 4410.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    On-Demand Activation of Transesterification by Chemical Amplification in Dynamic Thiol-Ene Photopolymers

    Alabiso, W., Sölle, B., Reisinger, D., Guedes de la Cruz, G. D. C., Schmallegger, M., Grießer, T., Rossegger, E. & Schlögl, S., 6 Nov 2023, In: Angewandte Chemie - International Edition. 62.2023, 45, 6 p., e202311341.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Novel test-rig for compaction behaviour analysis of textile reinforcements for improved RTM-process replication

    Bender, M. & Fauster, E., 1 Nov 2023, In: Advanced Manufacturing: Polymer and Composites Science. 9.2023, 1, 5 p., 2263828.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Revolutionizing fiber-reinforced thermoplastic composite recycling : the LightCycle project's journey towards energy-efficient upcycling and quality material regeneration

    Krempl, N. & Shahroodi, Z., 1 Nov 2023, 60th Ilmenau Scientific Colloquium. p. 1-10 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Bestimmung des pvT-Verhaltens für unterschiedliche MIM-Feedstocks

    Duretek, I., 24 Oct 2023, Leoben. 8 p.

    Research output: Book/Report › Commissioned report › Research

  10. Published

    Synthesis and characterization of bio-based transesterification catalysts for green 3D-printable dynamic photopolymers

    Sölle, B., Shaukat, U., Rossegger, E. & Schlögl, S., 19 Oct 2023, In: Polymer Chemistry. 44.2023, 14, p. 4994-5003 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Impact of Multiple Reprocessing on Properties of Polyhydroxybutyrate and Polypropylene

    Main, P., Petersmann, S., Wild, N., Feuchter, M., Duretek, I., Edeleva, M., Ragaert, P., Cardon, L. & Lucyshyn, T., 18 Oct 2023, In: Polymers. 15.2023, 20, 24 p., 4126.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Tension-after-impact (TAI) performance and 3D damage visualization of carbon-fiber epoxy composites with adhesively bonded patch repairs

    Röper, F., Sommacal, S., Compston, P., Tauchner, J., Wolfahrt, M. & Pinter, G. G., 15 Oct 2023, In: Composite structures. 322.2023, 15 October, 11 p., 117338.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Material data determination for one ceramic CIM-feedstock for injection molding simulation using SIGMASOFT®

    Duretek, I., 12 Oct 2023, 15 p.

    Research output: Book/Report › Commissioned report › Research

  14. Published

    Material characterisation of industrial textile waste under consideration of various processing conditions

    Jenull, U., Duretek, I., Lucyshyn, T. & Holzer, C., 9 Oct 2023, Proceedings SARDINIA 2023. p. 1-5 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. E-pub ahead of print

    Investigating the impact of manufacturing conditions on crack growth rate in nitrile butadiene rubber for enhanced service life – Part 01

    Gehling, T., Kerschbaumer, R. C., Pinter, G. G., Fasching, M. A., Schwarz, T. & Schieppati, J., 7 Oct 2023, (E-pub ahead of print) In: Results in Engineering. 20.2023, December, 8 p., 101484.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Redox cationic frontal polymerization: a new strategy towards fast and efficient curing of defect-free fiber reinforced polymer composites

    Malik, M. S., Wolfahrt, M. & Schlögl, S., 4 Oct 2023, In: RSC Advances. 13.2023, 41, p. 28993-29003 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Crack penetration versus deflection in extrusion-based additive manufacturing – Impact of nozzle temperature and morphology

    Waly, C., Petersmann, S. & Arbeiter, F., Oct 2023, In: Theoretical and Applied Fracture Mechanics. 127.2023, October, 13 p., 104032.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    In Situ Observation of Micro-Patterned Elastomeric Surfaces: The Formation of the Area of Real Contact and the Influence on Its Friction and Deformation Behaviour

    Hausberger, A., Pecora, M., Favier, D., Rossegger, E., Tockner, M., Ules, T., Haselmann, M., Schlögl, S. & Gauthier, C., 29 Sept 2023, In: Materials. 16.2023, 19, 17 p., 6489.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Controlling Curing Kinetics in Thiol-Ene Reactions with Light

    Höller, R., Müller, S. M., Schlögl, S. & Griesser, T., 21 Sept 2023.

    Research output: Contribution to conference › Poster › Research

  20. E-pub ahead of print

    Highly conductive RuO2 thin films from novel facile aqueous chemical solution deposition

    Angermann, M., Jakopic, G., Prietl, C., Griesser, T., Reichmann, K. & Deluca, M., 16 Sept 2023, (E-pub ahead of print) In: Journal of sol-gel science and technology. 108.2023, December, p. 575-587 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Statistical-based optimization of fused filament fabrication parameters for short-carbon-fiber-reinforced poly-ether-ether-ketone considering multiple loading conditions

    de Carvalho, W. S., Marzemin, F., Belei, C., Petersmann, S., Arbeiter, F. & de Traglia Amancio-Filho, S., 15 Sept 2023, In: Polymer Testing. 128.2023, November, 13 p., 108207.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Closing the loop of polypropylene and polystyrene food packaging

    Jahn, E., Fajtak, A., Archodoulaki, M. V., Bichler, L., Pinter, E. & Krempl, N., 13 Sept 2023, p. 1.

    Research output: Contribution to conference › Poster › Research › peer-review

  23. Published

    Influence of Melt Strength Enhancers on PHB Processing

    Main, P., Lucyshyn, T., Van de Ginste, L. & Cardon, L., 13 Sept 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Fabrication of Amorphous Silicon-Carbon Hybrid Films using Single Source Precursors

    Sauermoser, A., Lainer, T., Bandl, C., Haas, M., Knoechl, A., Goni, F., Fischer, R., Fitzek, H., Dienstleder, M., Prietl, C., Kelterer, A. M., Bandl, C., Jakopic, G., Kothleitner, G. & Haas, M., 12 Sept 2023, In: Inorganic chemistry. 62.2023, 38, p. 15490-15501 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Effect of LOHC on HDPE and POK under different temperature conditions

    Surisetty, J. S. S., Lucyshyn, T. (Editor) & Holzer, C., 7 Sept 2023.

    Research output: Contribution to conference › Poster › Research

  26. Published

    Influence of processing conditions of industrial textile waste on rheological and thermal material properties

    Jenull, U., Holzer, C. & Lucyshyn, T., 7 Sept 2023, 31st Leoben-Conference on Polymer Engineering and Science: Circular Thinking in Polymer Technology. Leoben, Vol. Volume 12. p. 1-12 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Susmagpro

    Schuschnigg, S. & Kukla, C., 7 Sept 2023.

    Research output: Contribution to conference › Poster › Research

  28. Published

    The effect of coalescence and diffusion on the part generation in the ARBURG plastic freeforming

    Hentschel, L., Maurer, C., Gonzalez-Gutierrez, J., Kynast, F., Schäfer, U. & Holzer, C., 7 Sept 2023, p. 1-1. 1 p.

    Research output: Contribution to conference › Poster › Research

  29. Published

    The Effect of Post-industrial Recycled Glass Fiber Flakes on the Rheological Properties of Recycled Polypropylene

    Shahroodi, Z., Krempl, N. (Editor) & Holzer, C. (Co-editor), 7 Sept 2023.

    Research output: Contribution to conference › Poster › Research › peer-review

  30. Published

    Solution-Processable Cu3BiS3 Thin Films: Growth Process Insights and Increased Charge Generation Properties by Interface Modification

    Rath, T., Marin-Beloqui, J. M., Bai, X., Knall, A.-C., Sigl, M., Warchomicka, F., Grießer, T., Amenitsch, H. & Haque, S. A., 6 Sept 2023, In: ACS Applied Materials and Interfaces. 15.2023, 35, p. 41624-41633 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    UV-stabilization of linseed oil-based epoxy resin

    Schwaiger, M., Schedler, M. & Resch-Fauster, K., 4 Sept 2023.

    Research output: Contribution to conference › Poster › Research

  32. Published

    Debinding And Sintering Strategies For Fused Filament Fabrication Of Aluminium Alloys

    Poehle, G., Quadbeck, P., Riecker, S., Kukla, C., Momeni, V. & Schuschnigg, S., Sept 2023, Euro Powder Metallurgy 2023 Congress & Exhibition.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Filament Development for Metallic Fused Filament Fabrication of Aluminium Alloys

    Kukla, C., Momeni, V., Poehle, G., Riecker, S. & Schuschnigg, S., Sept 2023, Euro Powder Metallurgy 2023 Congress & Exhibition.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Smart Materials for Green(er) Cities, a Short Review

    Nicolay, P., Schlögl, S., Thaler, S. M., Humbert, C. & Filipitsch, B., 16 Aug 2023, In: Applied Sciences (Switzerland). 13.2023, 16, 19 p., 9289.

    Research output: Contribution to journal › Review article › peer-review

  35. E-pub ahead of print

    Ti40Zr10Cu36Pd14 bulk metallic glass as oral implant material

    Rezvan, A., Sharifikolouei, E., Soprunyuk, V., Schranz, W., Todt, J., Lassnig, A., Gammer, C., Sifferlinger, N. A., Asci, A., Okulov, I., Schlögl, S., Keckes, J., Najmi, Z., Cochis, A., Scalia, A. C., Rimondini, L., Sarac, B. & Eckert, J., 16 Aug 2023, (E-pub ahead of print) In: Materials and Design. 233.2023, 10 p., 112256.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Peroxide-based crosslinking of solid silicone rubber: part II: The counter-intuitive influence of dicumylperoxide concentration on crosslink effectiveness and related network structure

    Azevedo, M., Monks, A.-M., Kerschbaumer, R., Schlögl, S., Saalwächter, K., Walluch, M., Consolati, G. & Holzer, C., 15 Aug 2023, In: Journal of applied polymer science. 140.2023, 31, 17 p., e54111.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Determination of the material data for CIM-feedstock FAT-DS (SPT CA)

    Duretek, I., 14 Aug 2023, 13 p.

    Research output: Book/Report › Commissioned report › Research

  38. Published

    Degradation of PET – Quantitative estimation of changes in molar mass using mechanical and thermal characterization methods

    Oreski, G., Ottersböck, B., Barretta, C., Christöfl, P., Radl, S. & Pinter, G. G., Aug 2023, In: Polymer Testing. 125.2023, August, 8 p., 108130.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Determination of the glass transition temperature of an epoxy prepreg by Near Infrared Spectroscopy

    Salzmann, M., Teuchtmann, M. & Schledjewski, R., Aug 2023, In: Polymer Testing. 125.2023, August, 8 p., 108111.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Optimization and manufacture of polyetheretherketone patient specific cranial implants by material extrusion: A clinical perspective

    Smith, J. A., Petersmann, S., Arbeiter, F. & Schäfer, U., Aug 2023, In: Journal of the Mechanical Behavior of Biomedical Materials. 144.2023, August, 25 p., 105965.

    Research output: Contribution to journal › Review article › peer-review

  41. Published

    Parametric effect on inline width control for thermoplastic automated tape layup

    Yadav, N. & Schledjewski, R., Aug 2023.

    Research output: Contribution to conference › Paper

  42. Published

    Measurement of thermal conductivity and specific volume for four pharmaceutical formulations

    Duretek, I., 28 Jul 2023, 13 p.

    Research output: Book/Report › Commissioned report › Research

  43. E-pub ahead of print

    Tactile friction and perception of UV-curable coatings and their relation to physical surface parameters and contact mechanic simulation

    Ules, T., Grießer, M., Hausberger, A., Schipfer, C., Mansouri, M., Fuchs, P., Schlögl, S. & Gruber, D. P., 28 Jul 2023, (E-pub ahead of print) In: Journal of coatings technology and research. 20.2023, 6, p. 1803-1814 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Inferring material properties from FRP processes via sim-to-real learning

    Stieber, S., Schröter, N., Fauster, E., Bender, M., Schiendorfer, A. & Reif, W., 27 Jul 2023, In: International Journal of Advanced Manufacturing Technology. 128.2023, September, p. 1517–1533 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Enhancing High-Pressure Capillary Rheometer Viscosity Data Calculation with the Propagation of Uncertainties for Subsequent Cross-Williams, Landel, and Ferry (WLF) Parameter Fitting

    Hubmann, M., Schuschnigg, S., Duretek, I., Groten, J. & Holzer, C., 24 Jul 2023, In: Polymers. 15.2023, 14, 21 p., 3147.

    Research output: Contribution to journal › Article › Research › peer-review

  46. E-pub ahead of print

    Concepts towards bio-inspired multilayered polymer-composites

    Wiener, J., Arbeiter, F. & Pinter, G. G., 21 Jul 2023, (E-pub ahead of print) In: Procedia Structural Integrity. 2023, 47, p. 253-260 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. E-pub ahead of print

    Investigation of expandable fillers for reversible adhesive bonding in photovoltaic modules

    Wanghofer, F., Wolfberger, A., Oreski, G., Neumaier, L. & Schlögl, S., 20 Jul 2023, (E-pub ahead of print) In: International Journal of Adhesion and Adhesives. 126.2023, August, 10 p., 103454.

    Research output: Contribution to journal › Article › Research › peer-review

  48. E-pub ahead of print

    Review of in-process defect monitoring for automated tape laying

    Yadav, N. & Schledjewski, R., 20 Jul 2023, (E-pub ahead of print) In: Composites Part A: Applied Science and Manufacturing. 173.2023, Oktober, 16 p., 107654.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Computational modelling of the separation of molten polymer blends by a centrifugal technique

    Medvid, V., Steiner, H., Irrenfried, C., Feuchter, M. & Brenn, G., 17 Jul 2023, In: Journal of polymer research. 30.2023, 8, 308.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Personalization of Complex Vaginal Inserts of Ethylene Vinyl Acetate via 3D-Printing

    Eder, S., Kuchler, L., Katschnig, M., Brandl, B., Wolfgang, M., Koutsamanis, I., Hentschel, L., Arbeiter, F., Roblegg, E. & Spoerk, M., 13 Jul 2023, In: Advanced Materials Technologies. 8.2023, 17, 15 p., 2300237.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Vitrimeric shape memory polymer-based fingertips for adaptive grasping

    Kashef Tabrizian, S., Alabiso, W., Shaukat, U., Terryn, S., Rossegger, E., Brancart, J., Legrand, J., Schlögl, S. & Vanderborght, B., 12 Jul 2023, In: Frontiers in robotics and AI. 10.2023, 1206579.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...84 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301