Department Polymer Engineering and Science
Organisational unit: Departments and Institutes
Research output
- 2006
- Published
Heat deflection temperature of neat resins HPM001, HPM002 and HPM054
Pilz, G. & Lang, R., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Heterojunction Solar Cells consisting of Nanocomposites of MDMO-PPV and Copper Indium Disulfide Nanoparticles
Rath, T., Piber, M. S., Grießer, T., Trimmel, G., Meissner, D. & Stelzer, F., 2006.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Hochglanzoberflächen von Spritzgussteilen, Herstellung und Charakterisierung
Friesenbichler, W., Langecker, G., Berger, G., Reitter, M. & Jutz, S., 2006, 19. Leobener Kunststoff Kolloqium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-16Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Hybrid solar cells based on CuInS2 and MEH-PPV,
Piber, M. S., Rath, T., Grießer, T., Trimmel, G., Stelzer, F. & Meissner, D., 2006.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Hybrid Solar Cells based on CuInS2 and MEH-PPV
Grießer, T., 2006, Proceedings of the 4th World Conference on Photovoltaic Energy Conversion. p. 247-248Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Impact Tensile Characterization of Polytron-GRF
Steinberger, R. & Lang, R., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Improvement of the Impact Properties of Centrifugally Cast Glass Fibre Reinforced Plastics Pipes
Kucher, G., 2006Research output: Thesis › Diploma Thesis
- Published
Influence of Annealing on the Fracture Behavior of 200 µm Thick a-PVDF Films
Wallner, G., Major, Z., Maier, G. & Lang, R., 2006, In: Advanced engineering materials. 8, p. 1140-1145Research output: Contribution to journal › Article › Research › peer-review
- Published
Influence of Partially Degraded Polymers on the Photodegradation Behaviour of Polyethylene
Mahendran, A.-R., 2006Research output: Thesis › Master's Thesis
- Published
Influence of pvT-Data Measured at High Cooling Rates on Injection Molding Simulation Results
Lucyshyn, T., Duretek, I., Langecker, G. & Fischer, K., 2006, Program and Abstracts of the 22nd Annual Meeting of the Polymer Processing Society, Yamagata, Japan 2006. p. 237-237Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Influence of pvT-Data Measured at High Cooling Rates on Injection Molding Simulation Results: 22nd Annual Meeting of the Polymer Processing Society, Conference Proceedings
Langecker, G., Lucyshyn, T., Fischer, K. & Duretek, I., 2006Research output: Non-textual form › Web publication/site › Research
- Published
Influence of the curing degree on key resin properties of high Tg epoxy resins for composites
Wolfahrt, M., Pilz, G., Lang, R., Eugen, R., Krumlacher, W. & Plessing, A. K., 2006, proceedings: SAMPE-EUROPE 2006, Paris, F.. p. 314-319Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Influence of the curing degree on modulus, glass transition temperature and fracture energy of two epoxy resins for composites
Wolfahrt, M., Pilz, G. & Lang, R., 2006.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Infrared thermographic techniques for non-destructive damage characterization of carbon fibre reinforced polymers during tensile fatigue testing
Steinberger, R., Leitao, T. I. V., Ladstätter, E., Billinger, W., Pinter, G. & Lang, R., 2006, In: International Journal of Fatigue. p. 1340-1347Research output: Contribution to journal › Article › Research › peer-review
- Published
Investigation of the rheology and reactivity of extrudable wood-resin-compounds
Braun, J., Duretek, I., Müller, U., Friesenbichler, W. & Endesfelder, A., 2006.Research output: Contribution to conference › Poster › Research › peer-review
- Published
IR-spektroskopische Analysen an coextrudierten Rohrmustern
Balika, W. & Lang, R., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Kick Off Meeting of Task39 of the Solar Heating and Cooling Programme of the International Energy Agency
Köhl, M. (Editor), Meir, M. (Editor), Zörner, W. (Editor) & Wallner, G. (Editor), 2006, Eigenverlag.Research output: Book/Report › Anthology › Research
- Published
Kunststoffe - Neue Möglichkeiten in der Solarthermie
Wallner, G. & Lang, R., 2006, In: Erneuerbare Energie. p. 10-12Research output: Contribution to journal › Article › Research › peer-review
- Published
Kunststoffkollektoren mit integriertem Überhitzungsschutz
Resch, K., Hausner, R. & Wallner, G., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Luminescent copolymers for applications in multi-colour light emitting devices
Buchgraber, C., Pogantsch, A., Kappaun, S., Spanring, J. & Kern, W., 2006, In: Journal of polymer science : A, Polymer chemistry. A44, p. 4317-4327Research output: Contribution to journal › Article › Research › peer-review
- Published
Materialanalyse an extrudierten Verpackungsfolien
Wallner, G. & Lang, R., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Materialvergleich für Schiebedeckeln von Kühltruhen
Steinberger, R. & Lang, R., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Mechanische Basischarakterisierung des Epoxidharzes M10 (Epomid FL) im Trocken - und Feuchtzustand
Pilz, G., Karpf, R. & Thiel, H., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Mechanische, thermo-mechanische und bruchmechanische Charakterisierung von Laminatwerkstoffen
Pilz, G. & Wolfahrt, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Mechanische und thermoanalytische Tests an Composite Laminaten
Pinter, G. & Lang, R., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Mechanische und thermomechanische Charakterisierung unterschiedlich pigmentierter Coil-Coating-Lackfilme
Frank, A., 2006Research output: Thesis › Diploma Thesis
- Published
Mikroskopische Charakterisierung und Topographie/Erscheinungsbild-Korrelationen bandbeschichteter Bleche
Brandstätter, A., 2006, 78 p.Research output: Thesis › Diploma Thesis
- Published
- Published
Modifying the output characteristics of an organic light emitting device by refractive index modulation
Kern, W., Höfler, T., Weinberger, M., Rentenberger, S. & Pogantsch, A., 2006, In: Advanced functional materials. 16, p. 2369-2373Research output: Contribution to journal › Article › Research › peer-review
- Published
Moisture absorption of liner resins
Pilz, G. & Lang, R., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
New antimicrobial polymers through ring-opening metathesis polymerization
Kern, W., Seyfriedsberger, G., Gstrein, X., Stelzer, F. & Rametsteiner, K., 2006.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Novel Urea-siloxane Polymers as Gelling Agents for Silicone Fluids: Influence of the hard segment
Rieß, G. & Schmidt, H.-W., 2006, In: Monatshefte für Chemie = Chemical monthly. 137, p. 935-941Research output: Contribution to journal › Article › Research › peer-review
- Published
Optical Properties of Ethylene Copolymer Films for Solar Energy Conversion
Oreski, G. & Wallner, G., 2006, EuroSun 2006. ISES, p. 5-5Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Optimization of run parameters of Temperature Rising Elution Fractionation by the aid of a factorial design experiment
Aust, N., Gahleitner, M., Reichelt, K. & Raninger, B., 2006, In: Polymer Testing. 25, p. 896-903Research output: Contribution to journal › Article › Research › peer-review
- Published
Optimization of Run Parameters of Temperature Rising Elution Fractionation with the Aid of a Factorial Design Experiment
Aust, N., Gahleitner, M., Reichelt, K. & Raninger, B., 2006.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Photo-Fries Rearrangement in Polynorbornene Side Chains Accessible by two Different Wavelenghts
Grießer, T., Höfler, T., Trimmel, G., Kern, W. & Stelzer, F., 2006.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Photo-Fries rearrangements in polymers: Index patterning and Surface modification
Daschiel, U., Höfler, T., Temmel, S., Grießer, T., Trimmel, G. & Kern, W., 2006.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Photosensitive polynorbornene containing the benzyl thiocanate group - synthesis and patterning
Kern, W., Lex, A., Trimmel, G. & Stelzer, F., 2006, In: Journal of molecular catalysis / A. A 254, p. 174-179Research output: Contribution to journal › Article › Research › peer-review
- Published
Polyethylene compounds with antimicrobial surface properties
Seyfriedsberger, G., Rametsteiner, K. & Kern, W., 2006, In: European polymer journal. 42, p. 3383-3389Research output: Contribution to journal › Article › Research › peer-review
- Published
Polymer compounds with antimicrobial surface properties
Kern, W., Seyfriedsberger, G. & Rametsteiner, K., 2006, In: European polymer journal. 42, p. 3383-3389Research output: Contribution to journal › Article › Research › peer-review
- Published
Polymere Nanocomposites
Laske, S., 2006.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Polymeric Materials for Sustainable Development - WP Report "Erscheinungsbildcharakterisierung"
Wallner, G., Buder-Stroisznigg, M. & Gruber, D., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Polymeric Materials for Sustainable Development - WP Report "Polymere Nanocomposites für die Solartechnik"
Gruber, D., Wallner, G. & Lang, R., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Polymeric Materials for Sustainable Development - WP Report "Symposium/IEA-Task “Materialien für die Solartechnik”"
Wallner, G. & Lang, R., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Praxisnahe Prüfmethoden für die Messung des abrasiven und korrosiven Verschleißes
Friesenbichler, W., Berger, G. & Perko, J., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-21Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Praxisnahe Verschleißprüfung
Friesenbichler, W., 2006.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Prüfungs- und Versagensanalyse für die explosive Dekompression elastomerer Dichtungen
Major, Z., Lederer, K., Moitzi, M., Mitterhuber, M., Schwarz, T. & Lang, R., 2006, In: GAK : Gummi, Fasern, Kunststoffe. p. 685-694Research output: Contribution to journal › Article › Research › peer-review
- Published
Ranking of PE pipe grades by cyclic crack growth tests with cracked round bar specimens
Pinter, G., Haager, M. J. & Lang, R., 2006, ANTEC 2006. p. 2475-2479Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Ranking of polyethylene pipe materials using fatigue loading of cracked round bar specimens
Haager, M. J., Pinter, G., Balika, W. & Lang, R., 2006, Plastics Pipes XIII. Plastics Pipes Conference Association, p. 1-11Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Ranking of Polyethylene pipe materials using fatigue loading of cracked round bar specimens
Haager, M. J., Pinter, G., Balika, W. & Lang, R., 2006.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Rauigkeitsmessungen an unterschiedlichen Kunststofffolien
Balika, W. & Lang, R., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Rechnerische und experimentelle Untersuchungen zu Schwindung und Verzug von teilkristallinen Kunststoffen
Wassertheurer, M., 2006Research output: Thesis › Diploma Thesis
- Published
Simulation des Thermoformprozesses
Fertschej, A., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-15Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Simulation und Einfluss des Kühlprozesses auf die Morphologie von PP-Rohren
Nestelberger, S., 2006, 132 p.Research output: Thesis › Diploma Thesis
- Published
Solarthermische Kunststoffkollektoren mit integriertem Überhitzungsschutz
Wallner, G., Resch, K. & Hausner, R., 2006, Gleisdorf Solar 2006. Arbeitsgemeinschaft Erneuerbare Energie, p. 105-114Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Special topics of polymer science and advanced characterization methods - WP Report "DSC-basierende Wärmeleitfähigkeitsmessung"
Wallner, G. & Fischer, J., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Special topics of polymer science and advanced characterization methods - WP Report "Elektronenmikroskopie"
Wallner, G. & Major, Z., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Special topics of polymer science and advanced characterization methods - WP Report "Nanoindentation"
Wallner, G. & Major, Z., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Special topics of polymer science and advanced characterization methods - WP Report "Rastersondenmikroskopie"
Wallner, G., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Special topics of polymer science and advanced characterization methods - WP Report "Röntgenkleinwinkelstreuung - Folien"
Wallner, G., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Special topics of polymer science and advanced characterization methods - WP Report "Röntgenkleinwinkelstreuung - Rohrmaterialien"
Wallner, G. & Pinter, G., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Spritzgießsimulation - Einfluss der Stoffdaten auf die Vorhersage von Schwindung und Verzug
Lucyshyn, T., Duretek, I., Fischer, K. & Langecker, G., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-17Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Stabilisation of crosslinked ultra-high molecular weight polyethylene (UHMW-PE)-acetabular components with alpha-tocopherol
Lederer, K., 2006, In: Journal of materials science / Materials in medicine. 17, p. 1323-1331Research output: Contribution to journal › Article › Research › peer-review
- Published
Stabilisierung von UHMW-PE mit alpha-Tocopherol unterhalb des Schmelzpunkts
Hopfer, H., 2006, 113 p.Research output: Thesis › Diploma Thesis
- Published
Stoffdaten für die Simulation
Duretek, I., 2006.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Stoffdaten und Simulation
Lucyshyn, T., 2006.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Structural characterization tools for the development of heterophasic EP-copolymers
Aust, N. & Gahleitner, M., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Structure-Infrared Optical Property-Correlations of C,O,H-Polymers for Transparent Insulation and Greenhouse Applications
Wallner, G. & Oreski, G., 2006, In: Monatshefte für Chemie = Chemical monthly. 137, p. 899-910Research output: Contribution to journal › Article › Research › peer-review
- Published
Structure-infrared optical property-correlations of polar ethylene copolymer films for solar applications
Oreski, G. & Wallner, G., 2006, In: Solar energy materials and solar cells. 90, p. 1208-1219Research output: Contribution to journal › Article › Research › peer-review
- Published
Study on rheological behaviour of polymer melts at high shear rates using a new micro-rheology technique
Duretek, I., Friesenbichler, W., Schuschnigg, S., Jegadeesan, R. & Langecker, G., 2006, Past and future of polymer engineering technology and science. p. 117-130Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Study on rheological behaviour of polymer melts at increased pressure levels with the consideration of the compression heat
Rajganesh Jegadeesan, X., Friesenbichler, W., Duretek, I., Schuschnigg, S. & Langecker, G., 2006, The Chain of Knowledge - From Catalyst to Application. p. 1-1Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Surface modification and functionalization of polymers by VUV and UV irradiation in the presnce of trialkylsilane as reactive gases
Kern, W., Svagera, R., Spanring, J. & Ebel, M. F., 2006.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Synthesis and Characterization of Polypropylene Reinforced with Cellulose I and Cellulose II Fibers
Borja, Y., Rieß, G. & Lederer, K., 2006, In: Journal of Applied Polymer Science. 101, p. 364-369Research output: Contribution to journal › Article › Research › peer-review
- Published
Task Definition Meeting for a Task of the Solar Heating and Cooling Programme of the International Energy Agency: "POLYMERIC MATERIALS FOR SOLAR THERMAL APPLICATIONS"
Köhl, M. (Editor), Meir, M. (Editor), Zörner, W. (Editor) & Wallner, G. (Editor), 2006, Eigenverlag.Research output: Book/Report › Anthology › Research
- Published
Tensile, Bending and Charpy Tests for GF-UP Materials W1 and W2
Pilz, G. & Lang, R., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Tensile, Bending and Charpy Tests for Hybrid Materials W32 and W42
Pilz, G. & Lang, R., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Tensile tests for neat resin and calciumcarbon-ate filled resin formulations of Distitron 412 V2
Pilz, G. & Lang, R., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Test and failure analyses methodology for elastomeric seals exposed to explosive decompression
Major, Z., Lederer, K., Moitzi, M., Mitterhuber, M., Schwarz, T. & Lang, R., 2006, In: Rubber, fibres, plastics international. p. 93-100Research output: Contribution to journal › Article › Research › peer-review
- Published
The Test Frequency dependence of the fatigue behavior of elastomers
Major, Z., Feichter, C., Steinberger, R. & Lang, R., 2006, Fracture of Nano and Engineering Materials. Springer, p. 777-784Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Through-thickness process zone characterization at fatigue cracks in PE-HD
Fuchs, F. E., 2006, 50 p.Research output: Thesis › Diploma Thesis
- Published
Trialkylsilanes as reagents for the UV-induced surface modification of 1,4-polybutadiene
Kern, W., Spanring, J., Buchgraber, C., Ebel, M. F. & Svagera, R., 2006, In: Polymer. 47, p. 156-165Research output: Contribution to journal › Article › Research › peer-review
- Published
Trommelschälversuch an Aluminiumkernverbunden
Pinter, G. & Lang, R., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Untersuchungen an Polypropylen für eine Beizbeckenanwendung
Balika, W. & Lang, R., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Untersuchungen zur Abformung geometrischer und stochastischer Strukturen an Spritzgießformteilen
Berger, G., 2006Research output: Thesis › Doctoral Thesis
- Published
Ursache von Tigerstreifen auf Spritzgussteilen und deren Vorhersage mittels Spritzgieß-Simulation
Gsellmann, G. F., 2006, 115 p.Research output: Thesis › Diploma Thesis
- Published
Verfahren zur Herstellung eines vernetzten Elastomers
Temel, A. (Inventor), Kern, W. (Inventor), Stelzer, F. (Inventor), Ehrenfeldner, R. (Inventor), Holzner, A. (Inventor), Schaller, R. (Inventor) & Höchtl, M. (Inventor), 2006, Patent No. EP 06018832.3-1214Research output: Patent
- Published
Verfahren zur Herstellung eines vernetzten Elastomers
Temel, A. (Inventor), Kern, W. (Inventor), Stelzer, F. (Inventor), Ehrenfeldner, R. (Inventor), Holzner, A. (Inventor), Schaller, R. (Inventor) & Höchtl, M. (Inventor), 2006, Patent No. US 530 338Research output: Patent
- Published
Verfahren zur Modifizierung von Polymeroberflächen
Kern, W. (Inventor), 2006, Patent No. DE 50011240.1-08Research output: Patent
- Published
Vergleichende Härtungscharakterisieerung von Laminatwerkstoffen mittels DEA, DSC und DMA
Pilz, G., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Vergleichende Untersuchungen flächen- und kalandergeprägter PET-Laminatfolien
Wallner, G. & Lang, R., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Viscoelastic properties of unreinforced and reinforced plastic lumber
Stadler, M. A., 2006Research output: Thesis › Diploma Thesis
- Published
Viskositätsmessungen bei extrem hohen Schergeschwindigkeiten unter Berücksichtigung von Schererwärmung und Druckeinfluss
Duretek, I., Friesenbichler, W., Schuschnigg, S. & Rajganesh Jegadeesan, X., 2006, 19. Leobener Kunststoff Kolloquium - Spritzgieß- und Extrusionstechnik - Innovationen aus Industrie und Forschung. p. 1-20Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Weathering of Commercial Ethylene Copolymer Films - Spectroscopical Analysis of Aging Behaviour and Additive Diffusion
Oreski, G., Wallner, G., Eder, R. & Krasser-Lamik, R., 2006.Research output: Contribution to conference › Poster › Research › peer-review
- Published
Weathering of Commercial Ethylene Copolymer Films - Spectroscopical Analysis of Aging Behaviour and Additive Diffusion
Oreski, G., Wallner, G., Eder, R. & Krasser-Lamik, R., 2006, EuroSun 2006. ISES, p. 6-6Research output: Chapter in Book/Report/Conference proceeding › Conference contribution
- Published
Wood-Plastic Composites in Europe and North America A Market and Technical Analysis
Daniel, M. J. W., 2006Research output: Thesis › Diploma Thesis
- Published
Zugversuche an Kunststoffketten
Pilz, G. & Lang, R., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Zugversuche an PET-Verpackungsbändern
Pilz, G. & Lang, R., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Zugversuche an stumpfgeschweißten Polyethylenrohren nach EN 12814-2
Haager, M. J. & Lang, R., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- Published
Zugversuch und Härteprüfung an Silikonelastomeren
Wallner, G. & Lang, R., 2006Research output: Book/Report › Commissioned report › Transfer › peer-review
- 2005
- Published
