Department Polymer Engineering and Science

Organisational unit: Departments and Institutes

601 - 650 out of 4,192Page size: 50

Research output

  1. 2021
  2. Published

    Thiol–acrylate based vitrimers: From their structure–property relationship to the additive manufacturing of self-healable soft active devices

    Shaukat, U., Rossegger, E. & Schlögl, S., 28 Sept 2021, In: Polymer. 231.2021, 28 September, 11 p., 124110.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Wear Phenomenon in Injection Molding

    Zidar, D., 27 Sept 2021.

    Research output: Contribution to conference › Presentation › Research

  4. Published

    Influence of the Mold Material on the Injection Molding Cycle Time and Warpage Depending on the Polymer Processed

    Lucyshyn, T., Enffans D’Avernas, L. V. D. & Holzer, C., 21 Sept 2021, In: Polymers. 13.2021, 18, 16 p., 3196.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Usage of Near-Infrared Spectroscopy for Inline Monitoring the Degree of Curing in RTM Processes

    Salzmann, M., Blößl, Y., Todorovic, A. & Schledjewski, R., 17 Sept 2021, In: Polymers. 13.2021, 18, 13 p., 3145.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    The injection mold as a cyber physical system. Using simulation to train its artificial intelligence

    Berger-Weber, G. & Saeidi Aminabadi, S., 16 Sept 2021, Conference Proceedings 29th Leoben Kunststoffkolloquium: Smart Production - Sustainability and Polymers - Additive Manufacturing: . 2021 ed. Leoben, Vol. 29. 10 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Extrusion and Additive Manufacturing

    Schuschnigg, S., Hentschel, L., Cano Cano, S. & Momeni, V., 15 Sept 2021.

    Research output: Contribution to conference › Poster › Research

  8. Published

    Material extrusion additive manufacturing of multi-material components

    Cano Cano, S., Valy, L., Liu, D., Maurer, P., Ma, N., Czernilofsky, F., Schuschnigg, S., Sui, G., Kitzmantel, M., Kukla, C. & Gonzalez-Gutierrez, J., 15 Sept 2021, 29th Leoben-Conference on Polymer Engineering & Science. p. 184 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Methodenentwicklung zur kohärenten Charakterisierung bebinderter Verstärkungstextilen bei erhöhter Temperatur

    Bender, M. & Fauster, E., 15 Sept 2021.

    Research output: Contribution to conference › Poster › Research

  10. Published

    Thermal Conductive Polymer Compounds for Material Extrusion Additive Manufactured of Heat Sinks

    Holzer, C., Schuschnigg, S. & Cano Cano, S., 15 Sept 2021, 29th Leoben-Conference on Polymer Engineering & Science. p. 250 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Thermoforming and Process Simulation of bio-based Form Sheets for Aircraft Applications (BioForS)

    Legenstein, A., Salzmann, M. & Schledjewski, R., 15 Sept 2021.

    Research output: Contribution to conference › Poster › Research

  12. Published

    Tribological properties of extrusion based additive manufactured parts

    Stiller, T., Hausberger, A., Schuschnigg, S., Höfle, W. & Schnetzinger, K., 15 Sept 2021, 29th Leoben-Conference on Polymer Engineering & Science. p. 252 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Why is mechanical recycling of bioplastics important for a circular economy?

    Main, P. & Lucyshyn, T., 15 Sept 2021.

    Research output: Contribution to conference › Poster › Research

  14. E-pub ahead of print

    Ply-by-ply inline thermography inspection for thermoplastic automated tape layup

    Yadav, N., Oswald-Tranta, B., Schledjewski, R. & Wachtarczyk, K., 13 Sept 2021, (E-pub ahead of print) In: Advanced Manufacturing: Polymer and Composites Science. 7.2021, 3-4, p. 49-59 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Tex2Mat- the recycling of multi-material textiles

    Jenull, U., 13 Sept 2021.

    Research output: Contribution to conference › Presentation › Research

  16. Published

    Bio-based Form Sheets for Aircraft Applications (BioForS)

    Legenstein, A., Salzmann, M. & Schledjewski, R., 12 Sept 2021, 29th Leoben-Conference on Polymer Engineering and Science: 50 Years Polymer Engineering and Science at Montanuniversität Leoben. Friesenbichler, W. (ed.). Leoben, Vol. 10.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Fused Filament Fabrication-Based Additive Manufacturing of Commercially Pure Titanium

    Thompson, Y., Polzer, M., Gonzalez-Gutierrez, J., Kasian, O., Heckl, J. P., Dalbauer, V., Kukla, C. & Felfer, P., 12 Sept 2021, In: Advanced Engineering Materials. 23.2021, 12, 12 p., 2100380.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Damage tolerance and fracture properties in fused filament fabrication - trends, limitations and possibilities

    Arbeiter, F., 8 Sept 2021, Abstract Book of the Second European Conference on Structural Integrity of Additively Manufactured Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Morphology and Weld Strength of a Semi-Crystalline Polymer Produced via Material Extrusion-Based Additive Manufacturing

    Petersmann, S., Primetzhofer, A., Lammer, H., Leßlhumer, J., Pinter, G. G. & Arbeiter, F., 8 Sept 2021, Abstract Book of the Second European Conference on Structural Integrity of Additively Manufactured Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Thermal conductive, electrically insulating polymer compounds using material extrusion additive manufacturing for electronic parts

    Holzer, C., Cano Cano, S., Schuschnigg, S. & Hentschel, L., 2 Sept 2021, p. 32-32. 1 p.

    Research output: Contribution to conference › Abstract

  21. Published

    Indirect Additive Manufacturing Techniques for Metal Parts: Binder-Based Additive Manufacturing Techniques

    Gonzalez-Gutierrez, J., 1 Sept 2021, Encyclopedia of Materials: Metals and Alloys. The Netherlands: Elsevier, p. 319-329 11 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  22. Published

    Efficient 3d finite element modeling of cyclic elasto-plastic rolling contact

    Meyer, K. A., Skrypnyk, R. & Pletz, M., Sept 2021, In: Tribology International. 161.2021, September, 12 p., 107053.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Functional mechanical metamaterial with independently tunable stiffness in the three spatial directions

    Fleisch, M., Thalhamer, A., Meier, G., Raguž, I., Fuchs, P. F., Pinter, G., Schlögl, S. & Berer, M., Sept 2021, In: Materials today advances. 11.2021, September, 13 p., 100155.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Holistic approach towards quality assurance for thermoplastic Automated Tape Layup

    Yadav, N. & Schledjewski, R., Sept 2021.

    Research output: Contribution to conference › Poster › Research

  25. Published

    In- and off-line NDT in automated in-situ consolidation tape layup

    Yadav, N., Gürocak, M., Galic, A., Adam, R. & Schledjewski, R., Sept 2021, SAMPE EUROPE Conference and Exhibition 2021: Baden, Switzerland, 28-30 September 2021.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise

    Yong, A., Aktas, A., May, D., Endruweit, A., Advani, S. G., Hubert, P., Abaimov, S. G., Abliz, D., Akhatov, I., Ali, M. A., Allen, T., Berg, D. C., Bickerton, S., Brauner, C., Brütsch, D., Caglar, B., Causse, P., Chiminelli, A., Cohades, A. & Comas-Cardona, S. & 32 others, Danzi, M., Dittmann, J., Dransfeld, C., Ermanni, P., Fauster, E., Garcia-Manrique, J. A., Grishaev, V., Guilloux, A., Hancioglu, M., Harazi, W., Herman, T., Huang, W., Kabachi, M. A., Keller, A., Kind, K., Laspalas, M., Lebedev, O. V., Lizaranzu, M., Long, A., Masania, K., Michaud, V., Middendorf, P., Salvatori, D., Schubnel, R., Sharp, N., Sozer, E. M., Thomas, J., Trochu, F., Umer, R., Valette, J., Wang, J. H. & Willenbacher, B., Sept 2021, In: Composites Part A: Applied Science and Manufacturing. 148.2021, September, 16 p., 106480.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Tack measurement of bindered rovings for the dry fiber winding process

    Neunkirchen, S. & Schledjewski, R., Sept 2021, In: Polymer Composites. 42, 9, p. 4607-4616 10 p., 26172.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    Fracture of layered polymers

    Arbeiter, F., Petersmann, S., Wiener, J. & Spoerk, M., 31 Aug 2021.

    Research output: Contribution to conference › Abstract

  29. Published

    Bio-based polymers for transport packaging – possibilities & limitations

    Wild, N., Feuchter, M., Schindler, P., Poczi, A., Gebeshuber, I. C., Vasiljevic, M., Pamminger, H., MacQueen , M. & Brandstätter, A., 30 Aug 2021, Polymer Meeting 14 - Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Biocide coatings for thiol based photopolymers

    Schwarz, R., Grießer, T. & Sommer, K., 30 Aug 2021.

    Research output: Contribution to conference › Poster › Research

  31. Published

    Changing morphological features in a semi-crystalline polymer in material-extrusion based additive manufacturing

    Petersmann, S., Spörk-Erdely, P., Feuchter, M., Wieme, T., Arbeiter, F. & Spoerk, M., 30 Aug 2021, Polymer Meeting 14: Book of Abstracts. Slugovec, C. & Trimmel, G. (eds.). TU Graz, p. 60 CL-A4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Curing of epoxidized plant oils with solid acid hardener

    Schwaiger, M. & Resch-Fauster, K., 30 Aug 2021, Polymer Meeting 14 : Book of Abstracts. TU Graz, p. 83 CL-A16

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Digital light processing 3D printing with thiol–acrylate vitrimers

    Rossegger, E., Höller, R., Reisinger, D., Strasser, J., Fleisch, M., Grießer, T. & Schlögl, S., 30 Aug 2021.

    Research output: Contribution to conference › Poster › Research

  34. Published

    Dual-cure resins based on aromatic propargylether derivatives for additive manufacturing

    Sommer, K., Rieger, P., Schwarz, R. & Grießer, T., 30 Aug 2021.

    Research output: Contribution to conference › Poster › Research

  35. Published

    Dual-cure Resins Based on Aromatic Propargyl Ether Derivatives for Additive Manufacturing

    Sommer, K., Grießer, T., Schwarz, R. & Rieger, P., 30 Aug 2021.

    Research output: Contribution to conference › Poster › Research

  36. Published

    Formyl thioesters as low-toxic photoinitators for biocompatible resins

    Rieger, P. & Grießer, T., 30 Aug 2021.

    Research output: Contribution to conference › Poster › Research

  37. Published

    Rock bolt having sensor for measuring mechanical tension

    Feiel, S. (Inventor), Kern, W. (Inventor), Griesser, T. (Inventor) & Moser, P. (Inventor), 26 Aug 2021, IPC No. E21D 21/ 02 A I, Patent No. AU2020223803, Priority date 6 Feb 2020, Priority No. WO2020EP53028

    Research output: Patent

  38. E-pub ahead of print

    Equation for modelling energy transfers in multi-phase flows through porous media, optimised for liquid composite moulding processes

    Sebastian, R. G., Obertscheider, C., Fauster, E. & Schledjewski, R., 20 Aug 2021, (E-pub ahead of print) In: International journal of heat and mass transfer. 181.2021, December, 8 p., 121856.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    The Relationship between a Defined Microstructure within the Mold Surface and the Corresponding Roughness on the Part: A Systematic Study on Particle Size, Filler-, and Compatibilizer Content

    Kerschbaumer, R. C., Bolka, S., Pesl, T., Duretek, I. & Lucyshyn, T., 17 Aug 2021, In: Polymers. 13.2021, 16, 23 p., 2757.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Bending Properties of Lightweight Copper Specimens with Different Infill Patterns Produced by Material Extrusion Additive Manufacturing, Solvent Debinding and Sintering

    Gonzalez-Gutierrez, J., Cano Cano, S., Ecker, J. V., Kitzmantel, M., Arbeiter, F., Kukla, C. & Holzer, C., 6 Aug 2021, In: Applied Sciences : open access journal. 11, 16, 7262.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    On the Influence of Viscoelastic Modeling in Fluid Flow Simulations of Gum Acrylonitrile Butadiene Rubber

    Stieger, S., Mitsoulis, E., Walluch, M., Ebner, C., Roman Christopher, K., Haselmann, M., Mostafaiyan, M., Kämpfe, M., Kühnert, I., Wießner, S. & Friesenbichler, W., 15 Jul 2021, In: Polymers. 13.2021, 14, 18 p., 2323.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Selective Laser Melting of Al-7Si-0.5 Mg-0.5Cu: Effect of Heat Treatment on Microstructure Evolution, Mechanical Properties and Wear Resistance

    Wang, P., Yu, S., Shergill, J., Chaubey, A., Eckert, J., Prashanth, K. G. & Scudino, S., 15 Jul 2021, In: Acta metallurgica Sinica (English letters).

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Determination of material data for two PIM-feedstocks for injection molding simulation using Moldex3D

    Duretek, I., 9 Jul 2021, 12 p.

    Research output: Book/Report › Commissioned report › Research

  44. Published

    Investigating the influence of surface hardness and energy on the perceived stickiness of polymer coatings.

    Griesser, M., Ules, T., Schlogl, S. & Gruber, D. P., 6 Jul 2021, 2021 IEEE World Haptics Conference, WHC 2021. Institute of Electrical and Electronics Engineers, p. 1148 1 p. (2021 IEEE World Haptics Conference, WHC 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Assessment of the chemical degradation of PFPE lubricants and greases for space applications: implications for long-term on-ground storage

    Wolfberger, A., Hausberger, A., Schlögl, S. & Hołyńska, M., Jul 2021, In: CEAS space journal. 13, 3, p. 377-388 12 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Tailoring the chemical functionalization of a transparent polyethylene foil for its application in an OLED-based DNA biosensor

    Daniso, E., Maroh, B., Feldbacher, S., Mühlbacher, I., Schlögl, S. & Melpignano, P., 30 Jun 2021, In: Applied surface science. 552.2021, 30 June, 9 p., 149408.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Characterization of crack saturation in glass fiber reinforced epoxy resins through optical methods

    Gfrerrer, M., Schneider, C., Wiener, J., Sperling, C. & Pinter, G. G., 29 Jun 2021.

    Research output: Contribution to conference › Poster › Research

  48. Published

    Natural fibre reinforced thermoplastic sheet material: Thermoforming behaviour and process simulation: Thermoforming and Process Simulation

    Legenstein, A., Salzmann, M. & Schledjewski, R., 29 Jun 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  49. Published

    Spektroskopische Analyse von Prepregs (SAPP)

    Salzmann, M. & Schledjewski, R., 29 Jun 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    What to do with the waste? Options for GFRP and CFRP waste treatment along the value chain

    Kirschnick, U. & Schledjewski, R., 29 Jun 2021.

    Research output: Contribution to conference › Poster › Research › peer-review

  51. Published

    Viscoelastic Modelling and Fluid Flow Simulations of Acrylonitrile Butadiene Rubber

    Stieger, S., Mitsoulis, E., Roman Christopher, K. & Friesenbichler, W., 28 Jun 2021.

    Research output: Contribution to conference › Abstract › peer-review

Previous 1...9 10 11 12 13 14 15 16 ...84 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2, 8700 Leoben
  • Main phone number: +43 3842 402 2301