Department Materials Science

Organisational unit: Departments and Institutes

251 - 300 out of 5,453Page size: 50

Research output

  1. 2023
  2. Published

    The suitability of common reed (Phragmites australis) for load-bearing structural materials

    Albrecht, K., Neudecker, F., Veigel, S., Bodner, S., Keckes, J. & Gindl-Altmutter, W., Oct 2023, In: Journal of materials science. 58.2023, 39, p. 15411-15420 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. E-pub ahead of print

    Recent advances in nanomechanical and in situ testing techniques: Towards extreme conditions

    Kiener, D., Wurmshuber, M., Alfreider, M., Schaffar, G. J. K. & Maier-Kiener, V., 30 Sept 2023, (E-pub ahead of print) In: Current opinion in solid state & materials science. 27.2023, 6, 25 p., 101108.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Microstructural refinement by spontaneous recrystallization without prior deformation of a 15-5 PH steel alloy and its mechanism

    Ressel, G., Brandl, D., Hönigmann, T., Lukas, M., Stark, A., Gruber, C., Lukas, S., Stockinger, M. & Kozeschnik, E., 27 Sept 2023, In: Materials and Design. 234.2023, October, 11 p., 112370.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Press-compaction-assisted binder jetting of textured ceramics

    Moghadasi, M., Mahdaviarab, A., Hofer, A. K., Bermejo, R., Pei, Z. & Ma, C., 23 Sept 2023, In: Ceramics International. p. 39214–39222

    Research output: Contribution to journal › Article › Research › peer-review

  6. E-pub ahead of print

    Mapping strain across Co80Ta7B13 / Co62Ta6B32 glassy interfaces

    Evertz, S., Zalesak, J., Hans, M., Jansen, H. C., Keckes, J., Sheng, H., Eckert, J. & Gammer, C., 15 Sept 2023, (E-pub ahead of print) In: Materials and Design. 234.2023, October, 7 p., 112327.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Processing and microstructure–property relations of Al-Mg-Si-Fe crossover alloys

    Trink, B., Weißensteiner, I., Uggowitzer, P., Strobel, K., Hofer-Roblyek, A. & Pogatscher, S., 15 Sept 2023, In: Acta Materialia. 257.2023, 15 September, 27 p., 119160.

    Research output: Contribution to journal › Article › Research › peer-review

  8. E-pub ahead of print

    Design of high-strength martensitic steels by novel mixed-metal nanoprecipitates for high toughness and suppressed hydrogen embrittlement

    Moshtaghi, M., Maawad, E., Bendo, A., Krause, A., Todt, J., Keckes, J. & Safyari, M., 14 Sept 2023, (E-pub ahead of print) In: Materials & design. 234.2023, October, 15 p., 112323.

    Research output: Contribution to journal › Article › Research › peer-review

  9. E-pub ahead of print

    Assessment of different processing strategies to fabricate bulk Mg-Fe nanocomposites

    Roostaei, M., Uggowitzer, P., Pippan, R. & Renk, O., 12 Sept 2023, (E-pub ahead of print) In: Journal of Alloys and Metallurgical Systems (e-only). 4.2023, December, 9 p., 100034.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Direct observation of crack arrest after bridge notch failure: A strategy to increase statistics and reduce FIB-artifacts in micro-cantilever testing

    Zhang, Y., Bartosik, M., Brinckmann, S., Lee, S. & Kirchlechner, C., Sept 2023, In: Materials and Design. 233.2023, September, 7 p., 112188.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Measurement of residual stresses in surrogate coated nuclear fuel particles using ring-core focussed ion beam digital image correlation

    Leide, A. J., Haynes, T. A., Tzelepi, N., Payne, J., Jordan, M., Knol, S., Vreeling, J. A., Davies, M., Goddard, D. T., Pfeifenberger, M. J., Alfreider, M., Kiener, D. & Liu, D., Sept 2023, In: Nuclear Materials and Energy. 36.2023, September, 101470.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Thermal shock behavior of 3D-printed alumina ceramics with spatially tailored porosity

    Bastos Mateus, L., Schlacher, J. C., Nohut, S., Schwentenwein, M. & Bermejo Moratinos, R., 31 Aug 2023.

    Research output: Contribution to conference › Poster › Research

  13. Published

    On the Change in Hydrogen Diffusion and Trapping Behaviour of Pearlitic Rail Steel at Different Stages of Production

    Eichinger, M., Loder, B., Tkadletz, M., Schnideritsch, H., Klösch, G. & Mori, G. K., 23 Aug 2023, In: Materials. 16.2023, 17, 15 p., 5780.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Synergistic enhancement of hydrogen interactions in palladium-gold-silicon metallic glass on multilayered graphene

    Sarac, B., Ivanov, Y. P., Putz, B., Karazehir, T., Mitterer, C., Greer, A. L., Sarac, A. S. & Eckert, J., 16 Aug 2023, In: Journal of Materials Chemistry A. 11, p. 19396-19407

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    The Ball-on-Ring-test: Enhancing an analytical solution by numerical analysis for elastic deformation and small displacements

    Staudacher, M., Supancic, P. & Lube, T., 16 Aug 2023, In: Journal of the European Ceramic Society. 43.2023, 15, p. 7167-7177 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. E-pub ahead of print

    Ti40Zr10Cu36Pd14 bulk metallic glass as oral implant material

    Rezvan, A., Sharifikolouei, E., Soprunyuk, V., Schranz, W., Todt, J., Lassnig, A., Gammer, C., Sifferlinger, N. A., Asci, A., Okulov, I., Schlögl, S., Keckes, J., Najmi, Z., Cochis, A., Scalia, A. C., Rimondini, L., Sarac, B. & Eckert, J., 16 Aug 2023, (E-pub ahead of print) In: Materials and Design. 233.2023, 10 p., 112256.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    High density of stacking faults strengthened TaN/TiN multilayer

    Huang, Y., Chen, Z., Wagner, A., Mitterer, C., Song, K. & Zhang, Z., 15 Aug 2023, In: Acta materialia. 255.2023, 15 August, 12 p., 119027.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Magnetic Properties of a High-Pressure Torsion Deformed Co-Zr Alloy

    Stückler, M., Wurster, S., Alfreider, M., Zawodzki, M., Krenn, H. & Bachmaier, A., 8 Aug 2023, In: Nanomaterials. 13.2023, 16, 10 p., 2280.

    Research output: Contribution to journal › Article › Research › peer-review

  19. E-pub ahead of print

    Old core, new tricks: a comparative study of old and new mudstone cores for applications in the energy transition

    Bensing, J., Misch, D., Skerbisch, L., Hujer, W., Gumpenberger, T., Mekonnen, E., Kostoglou, N. & Gier, S., 8 Aug 2023, (E-pub ahead of print) In: Geoenergy. 1.2023, 1, 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. E-pub ahead of print

    Improved thermolytic dehydrogenation of LiBH4 nanoconfined in few-layer graphene with different functionalities

    Guo, R.-F., Hsu, C.-Y., Kostoglou, N., Hinder, S. J., Baker, M., Mitterer, C., Rebholz, C. & Wang, C.-Y., 2 Aug 2023, (E-pub ahead of print) In: Materials Today Sustainability. 24, 11 p., 100486.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Short-range order patterns in Mg66Zn29Ca5 metallic glass: Phase transformations and crystallization kinetics

    Naghdali, S., Shabestari, S. G., Saghafian, H., Ramasamy, P., Spieckermann, F., Chen, Z., Zhang, Z. & Eckert, J., 1 Aug 2023, In: Journal of non-crystalline solids. 613.2023, 1 August, 10 p., 122390.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Machine learning mechanical properties of steel sheets from an industrial production route

    Millner, G., Mücke, M., Romaner, L. & Scheiber, D., Aug 2023, In: Materials. 30.2023, August, 11 p., 101810.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Revealing effects of solute Ta on solidification and precipitation of Al-7Si-0.3Mg based alloys

    Spacil, I., Holec, D., Albu, M. & LI, J., Aug 2023, In: Materialia. 30.2023, August, 17 p., 101846.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Toxic element-free Ti-based metallic glass ribbons with precious metal additions

    Yüce, E., Spieckermann, F., Asci, A., Wurster, S., Ramasamy, P., Xi, L., Sarac, B. & Eckert, J., Aug 2023, In: Materials today advances. 19.2023, August, 11 p., 100392.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Exploring the high-temperature deformation behavior of monocrystalline silicon – An advanced nanoindentation study

    Schaffar, G., Tscharnuter, D. & Maier-Kiener, V., 29 Jul 2023, In: Materials and Design. 2023, 233, 10 p., 112198.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Parameters influencing the fracture of Mo films and their wider significance

    Cordill, M. J., Kreiml, P., Jörg, T., Žák, S. & Mitterer, C., 18 Jul 2023, In: MRS Advances. 8.2023, July, 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    A novel test specimen for strength testing of ceramics for additive manufacturing

    Staudacher, M., Lube, T., Glettler, J., Scheithauer, U. & Schwentenwein, M., 13 Jul 2023, In: Open ceramics. 15, 100410.

    Research output: Contribution to journal › Article › Research › peer-review

  28. E-pub ahead of print

    γ0.625pt′-size effect on the deformation microstructure and texture in a Ni-based superalloy using in-situ neutron diffraction

    Yan, Z., Srikakulapu, K., Gao, Y., Qin, H., Rong, Y., Bi, Z., Xie, Q., An, K., Wang, Y. & Tan, Q., 12 Jul 2023, (E-pub ahead of print) In: Scripta materialia. 236.2023, November, 5 p., 115665.

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Exploring the mechanical properties of additively manufactured carbonrich zirconia 3D microarchitectures

    Winczewski, J. P., Zeiler, S., Gabel, S., Susarrey-Arce, A., Gardeniers, J. G. E. & Merle, B., 11 Jul 2023, In: Materials and Design. 232.2023, August, 11 p., 112142.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Hydrogen physisorption mechanisms in nanoporous carbons: Insights from small angle neutron scattering using a hierarchical contrast model

    Stock, S., Seyffertitz, M., Kostoglou, N., Rauscher, M., Demé, B., Cristiglio, ‪., Rols, S., Hinder, S. J., Baker, M., Presser, V., Mitterer, C. & Paris, O., 10 Jul 2023.

    Research output: Contribution to conference › Poster › Research

  31. E-pub ahead of print

    Alloying elements in intermetallic γ-TiAl based alloys – A review on their influence on phase equilibria and phase transformations

    Musi, M., Graf, G., Clemens, H. & Spörk-Erdely, P., 9 Jul 2023, (E-pub ahead of print) In: Advanced engineering materials. 26.2024, 4, 26 p., 2300610.

    Research output: Contribution to journal › Review article › peer-review

  32. Published

    Intragranular thermal fatigue of Cu thin films: Near-grain boundary hardening, strain localization and voiding

    Hlushko, K., Ziegelwanger, T., Reisinger, M., Todt, J., Meindlhumer, M., Beuer, S., Rommel, M., Greving, I., Flenner, S., Kopecek, J., Keckes, J., Detlefs, C. & Yildirim, C., 1 Jul 2023, In: Acta Materialia. 253.2023, 1 July, 10 p., 118961.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Prediction of edge and tunnelling crack formation in layered ceramics using a stress-energy fracture criterion

    Papšík, R., Ševeček, O., Hofer, A.-K., Kraleva, I. R., Kreith, J. & Bermejo, R., 1 Jul 2023, In: Journal of the European Ceramic Society. 43, 7, p. 2928-2934 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    CIEC17 – Community Editorial

    Jeffs, S., Bache, M., Chevalier, J., Anselmi-Tamburini, U., Bermejo, R. & Jiménez-Piqué, E., Jul 2023, In: Journal of the European Ceramic Society. 43, 7, p. 2725-2727 3 p.

    Research output: Contribution to journal › Editorial › peer-review

  35. Published

    Deformation and fatigue behaviour of additively manufactured Scalmalloy® with bimodal microstructure

    Schimbäck, D., Kaserer, L., Mair, P., Palm, F., Leichtfried, G. J., Pogatscher, S. & Hohenwarter, A., Jul 2023, In: International Journal of Fatigue. 172.2023, July, 14 p., 107592.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    High-temperature fracture behaviour of layered alumina ceramics with textured microstructure

    Schlacher, J. C., Chlup, Z., Hofer, A.-K. & Bermejo, R., Jul 2023, In: Journal of the European Ceramic Society. 43.2023, 7, p. 2917-2927 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Hydrogen Evolution Reaction on Ultra-Smooth Sputtered Nanocrystalline Ni Thin Films in Alkaline Media—From Intrinsic Activity to the Effects of Surface Oxidation

    Neumüller, D., Rafailović, L. D., Jovanović, A. Z., Skorodumova, N. V., Pašti, I. A., Lassnig, A., Grießer, T., Gammer, C. & Eckert, J., Jul 2023, In: Nanomaterials. 13.2023, 14, 18 p., 2085.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Nanoindentation creep of supercrystalline nanocomposites

    Yan, C., Bor, B., Plunkett, A., Domenech, B., Maier-Kiener, V. & Giuntini, D., Jul 2023, In: Materials and Design. 231.2023, July, 14 p., 112000.

    Research output: Contribution to journal › Article › Research › peer-review

  39. E-pub ahead of print

    Effect of wire-arc directed energy deposition on the microstructural formation and age-hardening response of the Mg-9Al-1Zn (AZ91) alloy

    Graf, G., Spörk-Erdely, P., Maawad, E., Burtscher, M., Kiener, D., Clemens, H. & Klein, T., 30 Jun 2023, (E-pub ahead of print) In: Journal of magnesium and alloys. 2023, 11, p. 1944-1958 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. E-pub ahead of print

    On energetics of allotrope transformations in transition-metal diborides via plane-by-plane shearing

    Leiner, T., Koutná, N., Janovec, J., Zelený, M., Mayrhofer, P. H. & Holec, D., 29 Jun 2023, (E-pub ahead of print) In: Vacuum. 215.2023, September, 9 p., 112329.

    Research output: Contribution to journal › Article › Research › peer-review

  41. E-pub ahead of print

    Oxidation mechanism of sputter deposited model SiNx/TiN/SiNx coatings

    Moritz, Y., Kainz, C., Peritsch, P., Mitterer, C. & Schalk, N., 26 Jun 2023, (E-pub ahead of print) In: Surface and Coatings Technology. 468.2023, 15 September, 7 p., 129753.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Revealing dynamic-mechanical properties of precipitates in a nanostructured thin film using micromechanical spectroscopy

    Alfreider, M., Meindlhumer, M., Ziegelwanger, T., Daniel, R., Keckes, J. & Kiener, D., 25 Jun 2023, In: MRS Bulletin. 49.2024, 1, p. 49-58 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Uniform Droplet Spraying of Magnesium Alloys: Modeling of Apollonian Fractal Structures on Micrograph Sections

    Liao, Y., Kostoglou, N., Rebholz, C. & Doumanidis, C. C., 24 Jun 2023, In: Journal of Manufacturing and Materials Processing. 7, 4, 17 p., 122.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Segregation to α2/γ interfaces in TiAl alloys: A multiscale QM/MM study

    Gehringer, D., Huber, L., Neugebauer, J. & Holec, D., 23 Jun 2023, In: Physical review materials . 7.2023, 6, 14 p., 063604.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Manufacturing size effect on the structural and mechanical properties of additively manufactured Ti-6Al-4V microbeams

    Yin, K., Cao, B., Todt, J., Gutmann, F., Tunçay, H. F., Roth, A., Fischer, F., Grübel, N., Pfaff, A., Ganzenmüller, G. C., Keckes, J., Hiermaier, S. & Eberl, C., 20 Jun 2023, In: JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY. 149.2023, 20 June, p. 18-30 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Precious metal amorphous AgAuSi: Alloy design by swapping gold for silver

    Weniger, L.-M., Gammer, C., Niewczas, M., Cordill, M. J., Spieckermann, F., Djemia, P., Faurie, D., Li, C.-H., Lassnig, A., Terziyska, V., Mitterer, C., Eckert, J. & Glushko, O., 17 Jun 2023, In: Materials and Design. 232.2023, August, 11 p., 112099.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Fatigue life assessment of metal foils in multifunctional composites via combined experiments and simulations

    Trost, C. O. W., Žák, S., Ruderes, K., Hammer, R., Rosc, J., Krivec, T., Schell, N., Gänser, H.-P., Hohenwarter, A. & Cordill, M. J., 15 Jun 2023, In: Composites Part B: Engineering. 259.2023, 15 June, 110715.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Crystal-Orientation-Dependent Oxygen Exchange Kinetics on Mixed Conducting Thin-Film Surfaces Investigated by In Situ Studies

    Siebenhofer, M., Riedl, C., Nenning, A., Raznjevic, S., Fellner, F., Artner, W., Zhang, Z., Rameshan, C., Fleig, J. & Kubicek, M., 13 Jun 2023, In: ACS Applied Energy Materials. 6.2023, 12, p. 6712-6720 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    In situ fragmentation of Al/Al2O3 multilayers on flexible substrates in biaxial tension

    Putz, B., Edwards, T. E. J., Huszar, E., Pethö, L., Kreiml, P., Cordill, M. J., Thiaudière, D., Chiroli, S., Faurie, D., Renault, P.-O. & Michler, J., 12 Jun 2023, In: Materials and Design. 232.2023, August, 15 p., 112081.

    Research output: Contribution to journal › Article › Research › peer-review

  50. E-pub ahead of print

    On the stability of Ti(Mn,Al)2 C14 Laves phase in an intermetallic Ti–42Al–5Mn alloy

    Graf, G., Seyffertitz, M., Spörk-Erdely, P., Clemens, H., Stark, A., Hatzenbichler, L., Holec, D., Burtscher, M., Kiener, D., Li, X. & Liu, K., 11 Jun 2023, (E-pub ahead of print) In: Intermetallics. 2023, 161, 9 p., 107962.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Cold Sintering of Ceramics: Effect of liquid phase chemistry on densification and strength

    Jabr, A., Randall, C. A. & Bermejo Moratinos, R., 5 Jun 2023.

    Research output: Contribution to conference › Poster › Research

Previous 12 3 4 5 6 7 8 9 ...110 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9/1.UG, 8700 Leoben