Chair of Simulation and Modelling of Metallurgical Processes (310)

Organisational unit: Chair

201 - 250 out of 624Page size: 50

Research output

  1. 2017
  2. Published

    Discussion on Modeling Capability for Macrosegregation

    Wu, M., Kharicha, A. & Ludwig, A., 15 Apr 2017, In: High temperature material processes. 36.2017, 5, p. 531-539 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Numerical Study of the Buoyancy Effect on Magnetohydrodynamic Three-Dimensional LiPb Flow in a Rectangular Duct

    Zahia, T., Faiza, M., Bouabdallah, A., Merah, A. & Kharicha, A., 5 Apr 2017, In: Journal of Fluids Engineering. 139.2017, 6, p. 061201 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Massive Formation of Equiaxed Crystals by Avalanches of Mushy Zone Segments

    Ludwig, A., Stefan-Kharicha, M., Kharicha, A. & Wu, M., 16 Mar 2017, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 48.2017, 6, p. 2927-2931 5 p.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    In-situ observation of coupled peritectic growth in a binary organic model alloy

    Ludwig, A., Mogeritsch, J. & Pfeifer, T., 1 Mar 2017, In: Acta Materialia. 126.2017, March, p. 329-335 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Phase-field modelling of ternary eutetic solidification in hot dip galvanization

    Mogeritsch, J. P., Ludwig, A., Böttger, B., Angeli, G., Riener, C. K. & Ebner, R., 1 Jan 2017, Proceedings of the 7th International Conference on Coupled Problems in Science and Engineering, COUPLED PROBLEMS 2017. Vol. 2017-January. p. 1171-1182 12 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    12. Karimi-Sibaki E., Kharicha A., Wu M., Bohacek J., Ludwig A., Steel Res. Int., Vol. 88 (5), 2017, DOI: 10.1002/srin.201770051. “Cover Picture: steel research int. 5/2017”

    Karimi Sibaki, E., Wu, M., Ludwig, A., Bohacek, J. & Kharicha, A., 2017

    Research output: Other contribution › Research

  8. Published

    A four phase model for the macrosegregation and shrinkage cavity during solidification of steel ingot

    Wu, M., Ludwig, A. & Kharicha, A., 2017, In: Applied Mathematical Modelling. 41.2017, January, p. 102-120 19 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    A Water Experiment Benchmark to Evaluate Numerical Models for the Motion of Particles in Continuous Casting Tundish

    Vakhrushev, A., Wu, M., Ludwig, A., Nitzl, G., Tang, Y. & Hackl, G., 2017, In: Steel research international. 88.2017, 1, 13 p., 1600276.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Engineering applications of magnetohydrodynamics

    Kharicha, A., 2017

    Research output: Thesis › Habilitation thesis › peer-review

  11. Published

    Numerical Study of Crystal Sedimentation Induced Segregation Band in Steel Ingots

    Wu, M., Kharicha, A. & Ludwig, A., 2017, p. 503-507. 5 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  12. Published

    Numerical Study of Crystal Sedimentation Induced Segregation Band in Steel Ingots

    Wu, M., Kharicha, A. & Ludwig, A., 2017, SP17.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Phase-Field Modelling of Ternary Eutectic Solidification in Hot Dip Galvanization

    Mogeritsch, J. & Ludwig, A., 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  14. Published

    Phase-Field Modelling of Ternary Eutectic Solidification in Hot Dip Galvanization

    Mogeritsch, J. & Ludwig, A., 2017, International Center for Numerical Methods in Engineering.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  15. Published

    Role of fragmentation in as-cast structure: numerical study and experimental validation

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2017, In: China Foundry. 14.2017, 5, p. 321-326 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Toward Modeling of Electrochemical Reactions during Electroslag Remelting (ESR) Process

    Karimi Sibaki, E., Kharicha, A., Wu, M., Ludwig, A. & Bohacek, J., 2017, In: Steel research international. 88.2017, 5, 8 p., 170001.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Volume Average Modelling of Equiaxed-to-Columnar Transition in a Vertically Solidified Pb-18 wt.%Sn Cavity

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2017, p. 312-16. 6 p.

    Research output: Contribution to conference › Presentation › Research › peer-review

  18. Published

    Volume Average Modelling of Equiaxed-to-Columnar Transition in a Vertically Solidified Pb-18 wt.%Sn Cavity

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2017, SP17.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. 2016
  20. Published

    quartal year report Q1-Q2/2016 on project "Automatisierte Prozesskettensimulation (MCL: A1.17)"

    Holzmann, T. (Editor), 10 Oct 2016

    Research output: Book/Report › Commissioned report › Research

  21. Published

    A columnar & non-globular equiaxed mixed three-phase model based on thermosolutal convection and grain movement

    Li, J., Ge, H., Wu, M., Ludwig, A. & Li, J., 11 Sept 2016, In: Jinshu-xuebao : Acta metallurgica Sinica. 52.2016, 9, p. 1096-1104 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    An attempt to model electrode change during the ESR process

    Karimi-Sibaki, E., Kharicha, A., Wu, M., Ludwig, A., Holzgruber, H., Ofner, B., Scheriau, A., Kubin, M. & Ramprecht, M., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012006.

    Research output: Contribution to journal › Conference article › peer-review

  23. Published

    A numerical study on electrochemical transport of ions in calcium fluoride slag

    Karimi-Sibaki, E., Kharicha, A., Wu, M. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012008.

    Research output: Contribution to journal › Conference article › peer-review

  24. Published

    Assessment of different turbulence models for the motion of non-metallic inclusion in induction crucible furnace

    Barati, H., Wu, M., Kharicha, A. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012026.

    Research output: Contribution to journal › Conference article › peer-review

  25. Published

    Simulation of macrosegregation in a large vertical continuous casting of steel

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012032.

    Research output: Contribution to journal › Conference article › peer-review

  26. Published

    Transient melting of an ESR electrode

    Kharicha, A., Karimi-Sibaki, E., Bohacek, J., Wu, M. & Ludwig, A., 10 Aug 2016, In: IOP Conference Series: Materials Science and Engineering. 143, 1, 012003.

    Research output: Contribution to journal › Conference article › peer-review

  27. Published

    Simulation in Metallurgical Processing: Recent Developments and Future Perspectives

    Ludwig, A., Wu, M. & Kharicha, A., 27 Jun 2016, In: JOM. 68.2016, 8, p. 2191-2197 7 p.

    Research output: Contribution to journal › Review article › peer-review

  28. Published

    International Conference on Materials, Processing and Product Engineering 2015 (MPPE2015)

    Eck, S., Ludwig, A. & Ebner, R., 14 Apr 2016, In: IOP Conference Series: Materials Science and Engineering. 119.2016, 1, 2 p., 011001.

    Research output: Contribution to journal › Editorial › peer-review

  29. Published

    On Validity of Axisymmetric Assumption for Modeling an Industrial Scale Electroslag Remelting Process

    Karimi Sibaki, E., Kharicha, A., Bohacek, J., Wu, M. & Ludwig, A., 1 Feb 2016, In: Advanced engineering materials. 18.2016, 2, p. 224-230 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Simulation of the Electric Signal During the Formation and Departure of Droplets in the Electroslag Remelting Process

    Kharicha, A., Wu, M., Ludwig, A. & Karimi Sibaki, E., 25 Jan 2016, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 47.2016, 2, p. 1427-1434 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    On the importance of modeling 3D shrinkage cavities for the prediction of macrosegregation in steel ingots

    Ludwig, A., Wu, M. & Kharicha, A., 1 Jan 2016, p. 3-10. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  32. Published

    Automatic optimization of localized heat treatment for Al-Si-Mg alloys

    Ludwig, A. & Holzmann, T., 2016, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Compact seaweed growth of peritectic phase on confined, flat properitectic dendrites

    Mogeritsch, J. & Ludwig, A., 2016, In: Journal of crystal growth.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Free-surface flow in horizontally rotating cylinder: experiment and simulation

    Bohacek, J., Kharicha, A., Ludwig, A., Wu, M., Paar, A., Brandner, M., Elizondo, L. & Trickl, T., 2016, In: IOP Conference Series: Materials Science and Engineering. p. 1-7

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Influence of forced convection on solidification and remelting in the developing mushy zone

    Wu, M., Vakhrushev, A., Ludwig, A. & Kharicha, A., 2016, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Localized strengthening of al-based casting alloys by automatized optimization of laser heat treatment

    Ludwig, A. & Holzmann, T., 2016, In: Minerals, Metals and Materials. 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Modelling Al-4wt.%Cu as-cast structure using equiaxed morphological parameters deduced from in-situ synchrotron X-ray radiography

    Ahmadein, M., Wu, M., Reinhart, G. & Nguyen-Thi, H., 2016, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Multiphysics simulation of electroslag remelting process

    Karimi Sibaki, E., 2016

    Research output: Thesis › Doctoral Thesis

  39. Published

    Numerical analysis of macrosegregation in vertically solidified Pb-Sn test castings - Part I: Columnar solidification

    Wu, M., Zeng, Y., Kharicha, A. & Ludwig, A., 2016, In: Computational materials science.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Numerical analysis of macrosegregation in vertically solidified Pb-Sn test castings – Part II : Equiaxed solidification

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2016, In: Computational materials science.

    Research output: Contribution to journal › Article › Research › peer-review

  41. Published

    Numerical analysis of solidification and macrosegregation in a semi-continuously cast steel strand

    Zheng, Y. (Co-editor), Wu, M., Kharicha, A. (Co-editor) & Ludwig, A. (Co-editor), 2016.

    Research output: Contribution to conference › Poster › Research › peer-review

  42. Published

    Numerical investigation of solidification and CET of the transparent alloy NPG-37.5 wt.% DC in microgravity “TRACE” experiment

    Ahmadein, M., Wu, M., Sturz, L., Zimmermann, G. & Ludwig, A., 2016, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Simulation of the Electrical Signal During the Formation and Departure of Droplets in the Electro Slag Remelting Process

    Kharicha, A., Wu, M., Ludwig, A. & Karimi Sibaki, E., 2016, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Simulation of thermos-solutal convection induced macrosegregation in a Sn-10% Pb alloy benchmark during columnar solidification

    Zheng, Y., Wu, M., Kharicha, A. & Ludwig, A., 2016, In: IOP Conference Series: Materials Science and Engineering.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Simulation of Turbulent Melt Flow and Deposition of Non-metallic Inclusions on Nozzle Wall of a Clogging Simulator

    Barati, H. (Co-editor), Wu, M., Kharicha, A. (Co-editor) & Ludwig, A. (Co-editor), 2016.

    Research output: Contribution to conference › Paper › peer-review

  46. Published

    Water model investigation of the influence of submerged entry nozzle on the turbulent flow in thin slab casting

    Nunner, G., 2016

    Research output: Thesis › Master's Thesis

  47. 2015
  48. Published

    In-situ observation of the dynamic of peritectic coupled growth using the binary organic system TRIS-NPG

    Mogeritsch, J. & Ludwig, A., 10 Nov 2015, p. 012055. 12055 p.

    Research output: Contribution to conference › Paper › peer-review

  49. Published

    On Macrosegregation

    Ludwig, A., Wu, M. & Kharicha, A., 1 Nov 2015, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 46, 11, p. 4854-4867 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Simulation of Crystal Sedimentation and Viscoplastic Behavior of Sedimented Equiaxed Mushy Zones

    Ludwig, A., Vakhrushev, A., Wu, M., Holzmann, T. & Kharicha, A., 25 Sept 2015, In: Transactions of the Indian Institute of Metals. 68, 6, p. 1087-1094 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. E-pub ahead of print

    A Dynamic Mesh-Based Approach to Model Melting and Shape of an ESR Electrode

    Karimi-Sibaki, E., Kharicha, A., Bohacek, J., Wu, M. & Ludwig, A., 11 Jun 2015, (E-pub ahead of print) In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 46.2015, 5, p. 2049-2061 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Analysis of macrosegregation formation and columnar-to-equiaxed transition during solidification of Al-4 wt.%Cu ingot using a 5-phase model

    Ahmadein, M., Wu, M. & Ludwig, A., 1 May 2015, In: Journal of crystal growth. 417, p. 65-74 10 p., 22363.

    Research output: Contribution to journal › Article › Research › peer-review

  53. E-pub ahead of print

    An approximate Riemann solver for shallow water equations and heat advection in horizontal centrifugal casting

    Bohacek, J., Kharicha, A., Ludwig, A. & Wu, M., 30 Apr 2015, (E-pub ahead of print) In: Journal of computational and applied mathematics. 267.2015, 15 September, p. 179-194 16 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...13 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18/III, 8700 Leoben
  • Main phone number: +43 3842 402 3101