Chair of Polymer Processing (350)

Organisational unit: Chair

201 - 250 out of 946Page size: 50

Research output

  1. 2020
  2. Accepted/In press

    Structural integrity of shrinkage and warpage optimized polypropylene produced by material extrusion-based additive manufacturing

    Petersmann, S., Spörk, M., Wiener, J., Pinter, G. G. & Arbeiter, F., 2020, (Accepted/In press).

    Research output: Contribution to conference › Abstract › peer-review

  3. 2019
  4. Published

    Determination of residual moisture on four composite films

    Duretek, I. & Winkler, S., 17 Dec 2019, 4 p.

    Research output: Book/Report › Commissioned report › Research

  5. Published

    Material data determination for one MIM-feedstock for injection molding simulation

    Duretek, I., 17 Dec 2019, 13 p.

    Research output: Book/Report › Commissioned report › Research

  6. Published

    Destroying or Enhancing the Mechanical Properties of Carbon Fibre Filled PA12 filaments for Additive Manufacturing?

    Holzer, C., Gonzalez-Gutierrez, J., Cano Cano, S., Schuschnigg, S., Arbeiter, F., Liu, D., Wuzella, G. H. & Lammer, H., 7 Nov 2019, p. 59-59. 1 p.

    Research output: Contribution to conference › Abstract › peer-review

  7. Published

    Influence of stearic acid in feedstocks for FFF and PIM

    Kukla, C., Cano Cano, S., Holzer, C. & Gonzalez-Gutierrez, J., 16 Oct 2019.

    Research output: Contribution to conference › Paper › peer-review

  8. E-pub ahead of print

    Material extrusion-based additive manufacturing of polypropylene: A review on how to improve dimensional inaccuracy and warpage

    Spörk, M., Holzer, C. & Gonzalez-Gutierrez, J., 15 Oct 2019, (E-pub ahead of print) In: Journal of applied polymer science. 137.2020, 12, 16 p., 48454.

    Research output: Contribution to journal › Review article › peer-review

  9. Published

    Vergleichende Härte-Untersuchungen von zwei unterschiedlichen Granulat-Chargen eines PBT-Compounds

    Duretek, I., 1 Oct 2019, 5 p.

    Research output: Book/Report › Commissioned report › Research

  10. Published

    Steel parts produced by material extrusion additive manufacturing, solvent debinding and sintering

    Gonzalez-Gutierrez, J., Thompson, Y., Cano Cano, S., Felfer, P., Kukla, C. & Holzer, C., 30 Sept 2019, Materials Science and Technology 2019 Conference Proceedings. p. 264-266 3 p. 139-137130

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Bestimmung der Stoffdaten an einem PPE/PS-I-Blend

    Duretek, I., 27 Sept 2019, 9 p.

    Research output: Book/Report › Commissioned report › Research

  12. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten an einem PA12

    Duretek, I., 23 Sept 2019, 18 p.

    Research output: Book/Report › Commissioned report › Research

  13. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten eines Cyclic Block Copolymer

    Duretek, I., 11 Sept 2019, 15 p.

    Research output: Book/Report › Commissioned report › Research

  14. Published

    Fused filament fabrication, debinding and sintering as a low cost additive manufacturing method of 316L stainless steel

    Thompson, Y., Gonzalez-Gutierrez, J., Kukla, C. & Felfer, P., 9 Sept 2019, In: Additive Manufacturing. 30.2019, December, 8 p., 100861.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Physical Foaming and Crosslinking of Polyethylene with Modified Talcum

    Kaltenegger-Uray, A., Rieß, G., Lucyshyn, T., Holzer, C. & Kern, W., 9 Sept 2019, In: Polymers. 11.2019, 9, 15 p., 1472.

    Research output: Contribution to journal › Article › Research › peer-review

  16. E-pub ahead of print

    Impact Optimization of 3D‐Printed Poly(methyl methacrylate) for Cranial Implants

    Petersmann, S., Spoerk, M., Huber, P., Lang, M., Pinter, G. & Arbeiter, F., 30 Aug 2019, (E-pub ahead of print) In: Macromolecular materials and engineering. 304.2019, 11, 10 p., 1900263.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Modified talcum as crosslinking agent for polyolefins

    Kaltenegger-Uray, A., Rieß, G., Lucyshyn, T., Holzer, C. & Kern, W., 26 Aug 2019, In: AIP Conference Proceedings. 2019, 2139, p. 1-5 5 p., 160001.

    Research output: Contribution to journal › Conference article › peer-review

  18. Published

    Determination of the material data for the PA66-Compound

    Duretek, I., 20 Aug 2019, 16 p.

    Research output: Book/Report › Commissioned report › Research

  19. Published

    Mechanical Recyclability of Polypropylene Composites Produced by Material Extrusion-Based Additive Manufacturing

    Spörk, M., Arbeiter, F., Raguz, I., Holzer, C. & Gonzales-Gutierrez, J., 7 Aug 2019, In: Polymers. 11.2019, 8, 18 p., 1318.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Fabrication and properties of extrusion-based 3D-printed hardmetal and cermet components

    Lengauer, W., Duretek, I., Fürst, M., Schwarz, V., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C., Kitzmantel, M., Neubauer, E., Lieberwirth, C. & Morrison, V., 1 Aug 2019, In: International Journal of Refractory Metals and Hard Materials. 82.2019, August, p. 141-149 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Fused Filament Fabrication of Metals and Ceramics for Special Applications

    Cano Cano, S., Holzer, C., Gonzalez-Gutierrez, J., Kukla, C. & Schuschnigg, S., 1 Aug 2019, 9 ed. Leykam Buchverlag. 15 p. (Industrial Management; no. 9)

    Research output: Book/Report › Anthology › Research

  22. Published

    Inter-layer bonding characterisation between materials with different degrees of stiffness processed by fused filament fabrication

    Khudiakova, A., Arbeiter, F., Spoerk, M., Wolfahrt, M., Godec, D. & Pinter, G., 1 Aug 2019, In: Additive Manufacturing. 28.2019, August, p. 184-193 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Investigations of rheological behaviour of two PIM-feedstocks (Catamold 17-4PH)

    Duretek, I., 30 Jul 2019, 13 p.

    Research output: Book/Report › Commissioned report › Research

  24. Published

    Determination of the material data for one TPU-compound

    Duretek, I., 24 Jul 2019, 16 p.

    Research output: Book/Report › Commissioned report › Research

  25. Published

    Thermally conductive high‐density polyethylene as novel phase‐change material: Application‐relevant long‐term stability

    Weingrill, H., Resch-Fauster, K., Lucyshyn, T. & Zauner, C., 12 Jul 2019, In: Journal of Applied Polymer Science. 137.2020, 2, 10 p., 48269.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Post processing of polymeric cranial implants produced by material extrusion based additive manufacturing

    Holzer, C., Gonzalez-Gutierrez, J., Petersmann, S., Pichelmayer, M. & von Campe, G., 9 Jul 2019. 1 p.

    Research output: Contribution to conference › Abstract

  27. Published

    Determination of the material data for ZY-Feedstock

    Duretek, I., 1 Jul 2019, 15 p.

    Research output: Book/Report › Commissioned report › Research

  28. Published

    Vergleichende REM-Analyse vier verschiedenen PP-Extrudaten

    Duretek, I., 28 Jun 2019, 11 p.

    Research output: Book/Report › Commissioned report › Research

  29. Published

    Verfahren zum Herstellen eines Gegenstands aus einem Maraging-Stahl

    Schnitzer, R. (Inventor) & Leitner, H. (Inventor), 27 Jun 2019, IPC No. C22C 38/ 50 A I, Patent No. DE102017131219, Priority date 22 Dec 2017, Priority No. DE201710131219

    Research output: Patent

  30. Published

    VERFAHREN ZUM HERSTELLEN EINES GEGENSTANDS AUS EINEM MARAGING-STAHL

    Schnitzer, R. (Inventor) & Leitner, H. (Inventor), 27 Jun 2019, IPC No. C22C 38/ 50 A I, Patent No. WO2019121866, Priority date 22 Dec 2017, Priority No. DE201710131219

    Research output: Patent

  31. Published

    Determination of the material data for PIM-feedstock "2"

    Duretek, I., 12 Jun 2019, 21 p.

    Research output: Book/Report › Commissioned report › Research

  32. Published

    A trouble‐free first layer adhesion for polypropylene‐based materials in material extrusion‐based additive manufacturing

    Spörk, M., Gonzalez-Gutierrez, J., Lichal, C., Cajner, H., Berger-Weber, G., Schuschnigg, S., Cardon, L. & Holzer, C., 31 May 2019, p. 327. 1 p.

    Research output: Contribution to conference › Abstract

  33. Published

    Bestimmung der thermodynamischen, rheologischen und mechanischen Stoffdaten für PP EPDM T20

    Duretek, I., 25 May 2019, 21 p.

    Research output: Book/Report › Commissioned report › Research

  34. Published

    Microscopic examination of 3 melt filter

    Duretek, I., 22 May 2019, 25 p.

    Research output: Book/Report › Commissioned report › Research

  35. Published

    Using soft interlayers as crack arrester in polymeric 3D-printed structures

    Arbeiter, F., Spörk, M., Wiener, J., Oesterreicher, F. & Pinter, G. G., 17 May 2019, 19th International ASTM/ESIS Symposium on Fatigue and Fracture Mechanics. p. 1 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Debinding behaviour of feedstock for material extrusion additive manufacturing of zirconia

    Kukla, C., Cano Cano, S., Kaylani, D., Schuschnigg, S., Holzer, C. & Gonzalez-Gutierrez, J., 15 May 2019, In: Powder Metallurgy. 2019, 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Determination of the material data for the CIM-feedstock "1"

    Duretek, I., 15 May 2019, 18 p.

    Research output: Book/Report › Commissioned report › Research

  38. Published

    Determination of the material data for the PIM-feedstock "2"

    Duretek, I., 15 May 2019, 20 p.

    Research output: Book/Report › Commissioned report › Research

  39. Published

    Cell Morphology on Poly(methyl methacrylate) Microstructures as Function of Surface Energy

    Katschnig, M., Maroh, B., Andraschek, N., Schlögl, S., Zefferer, U., Bock, E., Leitinger, G., Trattnig, C., Kaufmann, M., Balika, W., Holzer, C., Schäfer, U., Patz, S. & Schlögl, S., 2 May 2019, In: International journal of biomaterials . 2019, p. 2019 12 p., Article ID 2393481.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Determination of the material data for the CIM-feedstock "3"

    Duretek, I., 30 Apr 2019, 17 p.

    Research output: Book/Report › Commissioned report › Research

  41. Published

    Erhöhung der Bruchzähigkeit durch Multischichtaufbau

    Arbeiter, F., Oesterreicher, F., Wiener, J., Spörk, M. & Pinter, G. G., 26 Apr 2019, 28. Leobener Kunststoff-Kolloquium 2019. 9 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Aktuelle Entwicklungen in der Simulation des Pulverspritzgießprozesses

    Lucyshyn, T., Hubmann, M., Duretek, I. & Holzer, C., 25 Apr 2019, Simulation in der Kunststofftechnik. Schuecker, C. (ed.). Leoben, Vol. Band 9. p. 101-103 3 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  43. Published

    High-density polyethylene as phase-change material: Long-term stability and aging

    Weingrill, H., Resch-Fauster, K., Lucyshyn, T. & Zauner, C., 10 Apr 2019, In: Polymer Testing. 76.2019, July, p. 433-442 10 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Rheological behaviour of highly-filled polymers for Metal Injection Moulding

    Kukla, C., Slemenik Perše, L., Bek, M., Gonzalez-Gutierrez, J. & Holzer, C., 9 Apr 2019. 1 p.

    Research output: Contribution to conference › Poster › Research

  45. Published

    Optimisation of the interfacial bonding in polypropylene filled with different types of glass spheres produced by extrusion-based additive manufacturing

    Spörk, M. & Gonzalez-Gutierrez, J., 8 Apr 2019, p. 87-87. 1 p.

    Research output: Contribution to conference › Abstract

  46. Published

    Rheological behaviour of highly-filled polymers for Metal Injection Moulding

    Bek, M., Gonzalez-Gutierrez, J., Slemenik Perše, L., Holzer, C. & Kukla, C., 8 Apr 2019, p. 117-117. 1 p.

    Research output: Contribution to conference › Abstract

  47. Published

    Tensile properties of sintered 17-4PH stainless steel fabricated by material extrusion additive manufacturing

    Gonzalez-Gutierrez, J., Arbeiter, F., Schlauf, T., Kukla, C. & Holzer, C., 8 Apr 2019, In: Materials letters. 248.2019, 1 August, p. 165-168 4 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Determination of the material data for the CIM-feedstock "2"

    Duretek, I., 4 Apr 2019, 17 p.

    Research output: Book/Report › Commissioned report › Research

  49. Published

    Bestimmung der thermodynamischen und rheologischen Stoffdaten für ein gefülltes Polypropylen

    Duretek, I., 28 Mar 2019, 10 p.

    Research output: Book/Report › Commissioned report › Research

  50. Published

    Filament-extrusion 3D printing of hardmetal and cermet parts

    Lengauer, W., Duretek, I., Fürst, M., Gonzalez-Gutierrez, J., Schuschnigg, S. & Kukla, C., 25 Mar 2019, p. 77-78. 2 p.

    Research output: Contribution to conference › Paper › peer-review

  51. Published

    Bestimmung der thermodynamischen und rheologischen Stoffdaten für ein ungefülltes Polypropylen

    Duretek, I., 14 Mar 2019, 11 p.

    Research output: Book/Report › Commissioned report › Research

  52. Published

    Vergleichende MFR Messungen an 6 PP Proben mit unterschiedlicher thermomechanischer Vorgeschichte

    Duretek, I. & Wallner, A., 14 Mar 2019, 4 p.

    Research output: Book/Report › Commissioned report › Research

Previous 1 2 3 4 5 6 7 8 ...19 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/III, 8700 Leoben
  • Main phone number: +43 3842 402 3501