Chair of Physical Metallurgy (420)

Organisational unit: Chair

2001 - 2050 out of 2,174Page size: 50

Research output

  1. 2005
  2. Published

    Charakterisierung von Schmiedteilen

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  3. Published

    Charakterisierung von Ti-Basislegierungen im Hochtemperaturzugversuch

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    Charakterisierung von verzinkten Drähten

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  5. Published

    Charakterisierung von Warmarbeitsstählen im Hochtemperaturzugversuch

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  6. Published

    Charaktersierung von Zink

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  7. Published

    Combining complementary techniques to study precipitates in steels

    Bischof, M. A., Erlach, S., Staron, P., Leitner, H., Scheu, C. & Clemens, H., 2005, In: Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. 96, p. 1074-1080

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Decomposition and carbonisation of wood biopolymers – a microstructural study of softwood pyrolysis

    Paris, O., Zollfrank, C. & Zickler, G., 2005, In: Carbon. 43, p. 53-66

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Deformation and Fracture Mechanisms of Al2O3/Nb/Al2O3 Composites under Compression

    Zhang, Z. F., Brunner, D., Scheu, C. & Rühle, M., 2005, In: Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. 96, p. 62-70

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    EELS of twin boundaries in natural sphalerite (ZnS)

    Scrot, V., Scheu, C., Sigle, W. & Rühle, M., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  11. Published

    Eigenspannungsmessungen an geschmiedeten Turbinenscheiben aus IN718

    Cihak, U., Staron, P. & Clemens, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  12. Published

    Elektronenoptische Beurteilung von Bauteilen

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Elektronenoptische Beurteilung von Schneidwerkzeugen

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    Entwicklung und Charakterisierung von martensitaushärtenden Stählen für die Kunststoffindustrie

    Jamnig, B. D., 2005

    Research output: Thesis › Doctoral Thesis

  15. Published

    Experimental Studies and Thermodynamic Simulation of Phase Transformations in g-TiAl Based Alloys

    Chladil, H., Clemens, H., Leitner, H., Bartels, A., Gerling, R., Marketz, W. & Kozeschnik, E., 2005, Intergrative and Interdisciplinary Aspects of Intermetallics. Materials Research Society : MRS, p. S5.47.1-S5.47.6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Experimental Studies of Phase Transformations in a Carbon Containing Ti-45Al-7.5Nb Alloy and Related Thermodynamic Simulations

    Chladil, H., Clemens, H., Leitner, H., Bartels, A., Gerling, R. & Marketz, W. T., 2005, In: Advanced engineering materials. 7, p. 1131-1134

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Explosion eines Hydraulikventils

    Panzenböck, M., 2005, Konferenz nicht gefunden. p. 445-450

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Fraktrographische Beurteilung von Bauteilen

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Fraktrographische Beurteilung von Wöhlerproben

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  20. Published

    Fraktrographische Untersuchungen an durch Sprk geschädigten Teilen

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Fraktrographische Untersuchungen an Laserschweissungen

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Gefüge- und Eigenschaftsentwicklung an höchstfestem Stahlband

    Sonnleitner, M. P., 2005

    Research output: Thesis › Diploma Thesis

  23. Published

    Gefügeuntersuchungen an Kupferkabeln

    Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    High temperature Studies of Ti-Si-C Thin Films with Respect to Potential MAX Phase Formation

    Rester, M., Neidhardt, J., Mitterer, C., Eklund, P., Emmerlich, J., Ljungcrantz, H., Högberg, H. & Hultman, L., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  25. Published

    High-temperature tribological studies of arc-evaporated AlxCr1-xN coatings

    Franz, R., Sartory, B., Kaindl, R., Tessandri, R., Reiter, A., Derflinger, V. H., Polcik, P. & Mitterer, C., 2005, 16th International Plansee Seminar, (G. Kneringer, P. Rödhammer, H. Wildner, eds.). Plansee AG, p. 932-945

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    High-temperature tribological studies of arc-evaported AlxCr1-xN coatings

    Franz, R., Sartory, B., Kaindl, R., Tessadri, R., Reiter, R., Derflinger, V., Polcik, P. & Mitterer, C., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  27. Published

    Induktives Vakuumplasmaspritzen (IVPS) von verstärkten Refraktärmetalllegierungen

    Schatte, J. M., 2005

    Research output: Thesis › Doctoral Thesis

  28. Published

    Influence of carbide type and carbide content on the wear of tool steels

    Humer, R., 2005

    Research output: Thesis › Diploma Thesis

  29. Published

    Influence of hydrogen sulfide addition on the alumina deposition by plasma CVD

    Fink, M., Laimer, J., Störi, H. & Mitterer, C., 2005, In: Surface & coatings technology. 200, p. 360-363

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Influence of oxide phase formation on the tribological behaviour of Ti-Al-V-N coatings

    Kutschej, K., Mayrhofer, P., Kathrein, M., Polcik, P. & Mitterer, C., 2005, In: Surface & coatings technology. 200, p. 1731-1737

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Integrative and Interdisciplinary Aspects of Intermetallics

    Mills, M. J. (Co-editor), Inui, H. (Co-editor), Clemens, H. (Co-editor) & Fu, C. L. (Editor), 2005, Warrendale, PA, USA: Materials Research Society : MRS. (Materials Research Society Symposium Proceedings; vol. 842)

    Research output: Book/Report › Book › Research

  32. Published

    Intergranular Films at Metal-Ceramic Interfaces: Part I – Interface, Structure & Chemistry

    Avishai, A., Scheu, C. & Kaplan, W. D., 2005, In: Acta materialia. 53, p. 1559-1569

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Jahresbericht - CD-Labor für Advanced Hard Coatings

    Mitterer, C. & Tessadri, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Kleine Dinge - großer Erfolg

    Mitterer, C., 2005, In: Kleine Zeitung / Steiermark - Leoben und rund um den Erzberg. p. 22-22

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Low friction nanocomposite Cr-C/a-C:H coatings

    Gassner, G., Patscheider, J., Mayrhofer, P. H., Mitterer, C. & Kiefer, J., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  36. Published

    Massive Transformation in High Niobium Containing TiAl Alloys

    Bartels, A., Bystrzanowski, S., Chladil, H., Leitner, H., Clemens, H., Gerling, R. & Schimansky, F.-P., 2005, Intergrative and Interdisciplinary Aspects of Intermetallics. Materials Research Society : MRS, p. S5.48.1-S5.48.6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Metallographische Untersuchungen an Drähten

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  38. Published

    Metallographische Untersuchungen an Heizleitern

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  39. Published

    Metallographische Untersuchungen an Schweissungen - Bericht 1

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  40. Published

    Metallographische Untersuchungen an Schweissungen - Bericht 2

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Metallographische Untersuchungen an Schweissungen - Bericht 3

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Metallographische Untersuchungen an Schweissungen - Bericht 4

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Microstructural evolution of a rapidly solidified high-speed steel during high temperature annealing

    Stotter, C., Leitner, H., Ebner, R., Ramminger, P. & Brandstätter, E., 2005, Microstructural evolution of a rapidly solidified high-speed steel during high temperature annealing. p. 53-61

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Microstructure and Mechanical Properties of Si and Y Doped Tantalum

    Bischof, M. A., Mayer, S., Leitner, H., Clemens, H., Pranzas, K., Staron, P., Dehm, G., Knabl, W., Voiticek, A. & Geiger, E., 2005, 16th International Plansee Seminar, (G. Kneringer, P. Rödhammer, H. Wildner, eds.). Plansee AG, p. 489-503

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Mikrostrukturelle Charakterisierung von Stabelektroden für Entstaubungsanlagen

    Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    Multifunctional multi-component PVD coatings for cutting tools

    Kathrein, M., Michotte, C., Penoy, M., Polcik, P. & Mitterer, C., 2005, In: Surface & coatings technology. 200, p. 1867-1871

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Multi-functional multi-component Ti1-xAlxN based coatings

    Kutschej, K., Mayrhofer, P., Schatte, J., Kathrein, M., Michotte, C., Polcik, P. & Mitterer, C., 2005, 16th International Plansee Seminar, (G. Kneringer, P. Rödhammer, H. Wildner, eds.). Plansee AG, p. 774-788

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Multifunctional Thermal CVD (M) (S) (N) coatings for cutting

    Wagner, J. & Mitterer, C., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Nanoscale Deformation Mechanisms in Bone

    Gupta, H. S., Wagermaier, W., Zickler, G., Aroush, D.R.-B., Funari, S. S., Roschger, P., Wagner, D. & Fratzl, P., 2005, In: Nano Letters. 5, p. 2108-2111

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Nanostrukturierte Schichten gegen Hitze

    Mayrhofer, P. H. & Moser, M., 2005, In: Der Standard : Österreichs unabhängige Tageszeitung für Wirtschaft, Politik und Kultur. p. A4-A4

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Neue scheidungshärtende Warmarbeitsstähle für temperaturwechselbeanspruchte Werkzeuge

    Erlach, S. D. & Clemens, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1...37 38 39 40 41 42 43 44 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben