Chair of Physical Metallurgy (420)

Organisational unit: Chair

1951 - 2000 out of 2,174Page size: 50

Research output

  1. 2006
  2. Published

    Thermal stability of magnetron sputtered Zr–Si–N films

    Daniel, R., Musil, J., Zeman, P. & Mitterer, C., 2006, In: Surface & coatings technology. 201, p. 3368-3376

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Thermische Analyse von ausscheidungsgehärteten Stählen

    Schober, M., 2006

    Research output: Thesis › Diploma Thesis

  4. Published

    Transmission electron microscopy of nanocomposite Cr-B-N Thin Films

    Hegedüs, E., Kovács, I., Pecz, B., Toth, L., Budna, K. & Mitterer, C., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  5. Published

    Tribologisches Design von nanostrukturierten Hartstoffschichten

    Fontalvo, G., Walter, C. & Mitterer, C., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  6. Published

    Tribologische Untersuchung von unterschiedlichen Schichtmaterialien

    Kutschej, K. & Mitterer, C., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  7. Published

    tructure-property-performance relations of high-rate reactive arc-evaporated Ti-B-N nanocomposite coatings

    Neidhardt, J., Sullivan, M. O., Reiter, A. E., Rechberger, W., Grogger, W. & Mitterer, C., 2006, In: Surface & coatings technology. 201, p. 2553-2559

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Understanding - in a physical metallurgy and surface engineering context and controlling the mechanism of phase transformation from an as-deposited homogeneous alloy coating to .....

    Mayrhofer, P. H., Moser, M. & Rovere, F., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  9. Published

    Unterschiedliche lamellare Gefügetypen in intermetallischen TiAl-Legierungen

    Schnitzer, R., Chladil, H., Scheu, C., Clemens, H., Bystrzanowski, S., Bartels, A. & Kremmer, S., 2006, Fortschritte in der Metallographie. Werkstoff-Informationsges., p. 59-66

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  10. Published

    Untersuchungen an Hochgeschwindigkeitsventilen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    Untersuchungen an Spinndüsen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  12. Published

    Untersuchungen von gebrochenen Drahtabschnitten

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  13. Published

    Warmarbeitsstähle

    Mayer, S., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  14. Published

    Wear behavior of several PVD coatings against stainless steel

    Reiter, A., Rebelo De Figueiredo, M. & Mitterer, C., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Wenn der Stahlbohrer so hart wie Diamant wird

    Mitterer, C., 2006, In: Kleine Zeitung / Steiermark - Leoben und rund um den Erzberg. p. 18-19

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Werkstoffanalysen an Stählen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    Werkstoffcharakterisierung diverser Bauteile

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Werkstoffcharakterisierung einer Schubschleuder

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  19. Published

    Werkstoffcharakterisierung mittel dreidimensionaler Atomsonde

    Leitner, H. & Clemens, H., 2006, In: Berg- und hüttenmännische Monatshefte : BHM. 151, p. 199-204

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Werkstoffcharakterisierung und Gasmotoren, Zylinderlaufflächen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Werkstoffcharakterisierung und Sprödbruchverhalten hochfester Bleche

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Werkstoffcharakterisierung von Gittermasten

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Werkzeugstähle mit höchster Härte und Zähigkeit

    Zuber, M. & Leitner, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Wöhleruntersuchungen an Schwerstangenversuche (Qualitätsprüfungen) - Bericht 1

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Wöhleruntersuchungen an Schwerstangenversuche (Qualitätsprüfungen) - Bericht 2

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Wöhleruntersuchungen an Schwerstangenversuche (Qualitätsprüfungen) - Bericht 3

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    Workshop "Neue Trends in der Entwicklung und Anwendung von intermetallischen Titanaluminiden" - Bericht 3

    Clemens, H., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  28. Published

    Zugversuche an hochfesten Blechen

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  29. Published

    Zugversuche und bruchmechanische Untersuchungen an Laserschweissungen - Bericht 1

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    Zugversuche und bruchmechanische Untersuchungen an Laserschweissungen - Bericht 2

    Panzenböck, M., 2006

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  31. 2005
  32. Published

    1st Autumn School "Engineering Materials Science with Neutrons and Synchrotron Radiation"

    Schreyer, A., Reimers, W., Wroblewski, T., Haibel, A., Pyzalla, A. & Clemens, H., 2005, In: Advanced engineering materials. 7, p. 980-981

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    51. Metallkunde-Kolloquium - Abstractband

    Clemens, H. (Editor) & Kneißl, A. (Editor), 2005, Eigenverlag.

    Research output: Book/Report › Anthology › Research

  34. Published

    Abschlussbericht für MCTS

    Bischof, M. A., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  35. Published

    Alloying of molybdenum using inductive vacuum plasma spraying

    Schatte, J., Rödhammer, P., Mitterer, C., Sprenger, D. & Kailer, K.-H., 2005, 16th International Plansee Seminar, (G. Kneringer, P. Rödhammer, H. Wildner, eds.). Plansee AG, p. 1074-1088

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    An advanced approach to the characterization of precipitates in tool steels

    Bischof, M. A., Erlach, S. D., Staron, P., Leitner, H. & Clemens, H., 2005, Proc. Solid-Solid Phase Transformations in Inorganic Materials. TMS, p. 8-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    Analytical TEM Study of Microstructure-Property Relations in Liquid-Phase Sintered SiC with AlN- Y2O3 Additives

    Huang, R., Gu, H., Rixecker, G., Aldinger, F., Scheu, C. & Rühle, M., 2005, In: Zeitschrift für Metallkunde : international journal of materials research and advanced techniques. 96, p. 496-502

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    An intermetallic and metastable phase formation between Cu and Al Films

    Cha, L., Richter, G., Scheu, C., Wagner, T., Sturm, S. & Rühle, M., 2005, 7th multinational Congress on Microscopy. p. 347-348

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    An Intermetallic and Metastable Phase Formation between Cu and Al Films

    Cha, L.-M., Richter, G., Scheu, C., Wagner, T., Sturm, S. & Rühle, M., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  40. Published

    Ausscheidungsverhalten von AlN während des Stranggießens

    Winkelhofer, F., 2005

    Research output: Thesis › Diploma Thesis

  41. Published

    Ausscheidungsverhalten von Maragingstählen

    Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    Beschichtung / Charakterisierung

    Rebelo De Figueiredo, M., Franz, R., Daniel, R., Neidhardt, J. & Mitterer, C., 2005.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    CD-Labor für Advanced Hard Coatings - Zwischenbericht

    Mitterer, C. & Tessadri, R., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Characterization of Residual Stresses in Compressor Discs for Aeroengines: Neutron Diffraction and Finite Element Simulations

    Cihak, U., Stockinger, M., Staron, P., Tockner, J. & Clemens, H., 2005, Superalloys 718, 625, 706 and Derivatives 2005. p. 517-526

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    „Charakterisierung und Simulation der Ausscheidungsvorgänge in neuartigen Werkzeugstählen“ - Jahresbericht

    Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  46. Published

    Charakterisierung von DVD-Master

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  47. Published

    Charakterisierung von hoch aufgestickten austenitischen Stählen im Zugversuch

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Charakterisierung von hochniobhältigen Titanaluminid Legierungen

    Chladil, H., Clemens, H. & Leitner, H., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Charakterisierung von Kesselblechen

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Charakterisierung von Kupferdrähten

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Charakterisierung von Ni-Basislegierungen im Hochtemperaturzugversuch

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  52. Published

    Charakterisierung von Punktschweissungen an Heizleitern

    Panzenböck, M., 2005

    Research output: Book/Report › Commissioned report › Transfer › peer-review

Previous 1...36 37 38 39 40 41 42 43 44 Next
View graph of relations

Contact information

Roseggerstraße 12 / Max-Tendler-Straße 9, 8700 Leoben