Chair of Nonferrous Metallurgy (520)

Organisational unit: Chair

751 - 800 out of 2,400Page size: 50

Research output

  1. 2016
  2. Published

    Energie- und Ressourceneffizienz beim Recycling von Metallen

    Antrekowitsch, H., 21 Apr 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  3. Published

    Possible alternative secondary resources for the production of ferroalloys

    Rösler, G., Leuchtenmüller, M. & Antrekowitsch, J., 21 Apr 2016, p. 1-8. 8 p.

    Research output: Contribution to conference › Paper › peer-review

  4. Published

    Recovery of chromium from stainless steel slags

    Leuchtenmüller, M., Rösler, G. & Antrekowitsch, J., 21 Apr 2016. 9 p.

    Research output: Contribution to conference › Paper › peer-review

  5. Published

    Recovery of Chromium from Stainless Steel Slags

    Leuchtenmüller, M., 21 Apr 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  6. Published

    Size-dependent surface energies of Au nanoparticles

    Holec, D., Dumitraschkewitz, P., Fischer, F. D. & Vollath, D., 11 Apr 2016, p. 1-13. 13 p.

    Research output: Contribution to conference › Presentation › Research

  7. Published

    Metallrecycling

    Antrekowitsch, H., 8 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  8. Published

    Opportunities for the utilization of zinc oxides from secondary sources

    Antrekowitsch, J., 4 Apr 2016.

    Research output: Contribution to conference › Presentation › Research

  9. Published

    Werkstoffentwicklung bleifreier Messinglegierungen (Teil 3/3)

    Angerer, T., Hofer, S. & Antrekowitsch, H., 1 Apr 2016, In: Metall. 70, 4, p. 136-142

    Research output: Contribution to journal › Article › Research

  10. Published

    Aktivlote beim Targetbonding

    Hangler, T., Pretterhofer, S., Stöckl, M., Scheiber, S. (Reviewer) & Antrekowitsch, H. (Reviewer), 16 Mar 2016, 150 p.

    Research output: Other contribution › Education › peer-review

  11. Published

    Entwicklung eines gemeinsamen Aufarbeitungskonzeptes für unterschiedliche Materialien aus dem Shredderbetrieb

    Wegscheider, S. & Steinlechner, S., 10 Mar 2016

    Research output: Book/Report › Commissioned report › Research

  12. Published

    Recyclingmethoden für Reststoffe aus der Kupfermetallurgie

    Steinacker, S., 8 Mar 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  13. Published

    Recyclingmethoden für Reststoffe aus der Kupfermetallurgie

    Steinacker, S. & Antrekowitsch, J., 7 Mar 2016, Recycling und Reststoffe: Band 9. Nietwerder, Vol. 9. p. 497-512 16 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  14. Published

    Rohstoffe sind Zukunft

    Antrekowitsch, H., 1 Mar 2016

    Research output: Non-textual form › Exhibition › Education

  15. Published

    Atomsondentomographie und Clusterbildung in Aluminium Legierungen

    Dumitraschkewitz, P., 25 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  16. Published

    Optimierte AlMgMn-Legierungen für komplexe Umformanwendungen im Automobilbau

    Ebenberger, P., 25 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  17. Published

    Einfluss Verstrecken und Stabilisieren auf die Kaltaushärtung in 6016 und 6063

    Werinos, M. & Antrekowitsch, H., 24 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  18. Published

    Potential Contribution to the Supply of Silver by the Recycling of Industrial Residues from Zn, Pb, and Cu Plants

    Steinlechner, S., 18 Feb 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  19. Published

    Potential Contribution to the Supply of Silver by the Recycling of Industrial Residues from Zn, Pb, and Cu Plants

    Steinlechner, S., 18 Feb 2016.

    Research output: Contribution to conference › Paper › peer-review

  20. Published

    Potential Contribution to the Supply of Silver by the Recycling of Industrial Residues from Zn, Pb, and Cu Plants

    Steinlechner, S., 18 Feb 2016, Proc. of REWAS 2016.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Recycling of Poly-Metallic Residues from Metal Industry – Current Status and Future Developments

    Antrekowitsch, J., 16 Feb 2016.

    Research output: Contribution to conference › Paper › peer-review

  22. Published

    Kinetic Investigation of the Electric Furnace Copper Slag Treatment

    Steinacker, S. & Antrekowitsch, J., 15 Feb 2016, Collected Proceedings of the TMS 2016 145th Annual Meeting. USA

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Kinetic Investigation of the Electric Furnace Copper Slag Treatment

    Steinacker, S., 15 Feb 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  24. Published

    Dickenmessungen der Eloxierschicht auf Kupplungskolben aus EN AW-2007

    Scheiber, S. & Antrekowitsch, H., 11 Feb 2016

    Research output: Book/Report › Commissioned report › Research

  25. Published

    Current status and recent development in steel mill dust recycling

    Antrekowitsch, J., 4 Feb 2016.

    Research output: Contribution to conference › Presentation › Research

  26. Published

    Iron as a limiting factor in the direct leaching of waelz oxides

    Antrekowitsch, J. & Steinlechner, S., 1 Jan 2016, IMPC 2016 - 28th International Mineral Processing Congress. Vol. 2016-September.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Mini mill solutions in the recycling of electic arc furnace dust - the 2SDR process

    Rösler, G., Pichler, C., Steinlechner, S. & Antrekowitsch, J., 1 Jan 2016, REWAS 2016: Towards Materials Resource Sustainability. Springer International Publishing, p. 43-48 6 p.

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  28. Published

    A comparative study of CALPHAD and differential scanning calorimetry to optimize 7xxx aluminum alloys

    Kolb, G., Antrekowitsch, H., Uggowitzer, P., Pöschmann, D. & Pogatscher, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  29. Published

    Aktueller Entwiklungsstand der Metallrückgewinnung und Chromabtrennung aus LD-Schlacken

    Cattini, L., Schmid, H., Martinelli, W. & Rieger, J., 2016, Schlacken-Symposium 2016. p. 89-102

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Anhebung der relevanten mechanischen & dynamischen Minimalkennwerte bei Luftfahrt-platten im 7xxx-Legierungssystem durch metallurgische und thermomechanische Maßnahmen

    Kolb, G., 2016.

    Research output: Contribution to conference › Presentation › Research

  31. Published

    Atom probe tomography investigation of early stage clustering of as-quenched Al-Mg-Si alloys

    Pogatscher, S., Dumitraschkewitz, P. & Gerstl, S. S. A., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  32. Published

    Atom probe tomography of early stage clustering in Al alloys

    Pogatscher, S., Dumitraschkewitz, P. & Gerstl, S. S. A., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  33. Published

    Atom Probe Tomography Study of As-Quenched Al–Mg–Si Alloys 

    Dumitraschkewitz, P., Gerstl, S. S. A., Uggowitzer, P., Löffler, J. F. & Pogatscher, S., 2016, In: Advanced engineering materials. p. n/a-n/a

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Bestimmung des Schmelzverhaltens von Ferronickelschlacken

    Sagadin, C., 2016

    Research output: Thesis › Master's Thesis

  35. Published

    Charakterisierung und Evaluierung unterschiedlicher Recyclingmethoden für ausgewählte Elektroaltgerätefraktionen hinsichtlich der Rückgewinnung kritischer Rohstoffe

    Benedek, L., 2016

    Research output: Thesis › Doctoral Thesis

  36. Published

    Comparative study of thermodynamic predictions and differential scanning calorimetry for Al-Zn-Mg-Cu alloys

    Kolb, G., Antrekowitsch, H., Uggowitzer, P., Pöschmann, D. & Pogatscher, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  37. Published

    Concepts to optimize aging of Al-Mg-Si alloys

    Pogatscher, S., 2016.

    Research output: Contribution to conference › Presentation › Research

  38. Published

    Development of a new hydrometallurgical process for Indonesian copper sulphide

    Hutabarat, I. E. R., 2016

    Research output: Thesis › Doctoral Thesis

  39. Published

    Edelmetallrückgewinnung aus Bearbeitungsrückständen

    Kolb, G. & Bartelme, C., 2016, 13 p.

    Research output: Book/Report › Commissioned report › Transfer

  40. Published

    Effect of Interrupted Quenching on Al-Zn-Mg-Cu alloys

    Kolb, G., Antrekowitsch, H., Uggowitzer, P., Pöschmann, D. & Pogatscher, S., 2016.

    Research output: Contribution to conference › Abstract › peer-review

  41. Published

    Einflussfaktoren auf die schmelzmetallurgische Verwertung von aluminiumhaltigen, agglomerierten Reststoffen

    Blaschke, N., 2016

    Research output: Thesis › Master's Thesis

  42. Published

    Experimental study of refractory wear mechanisms caused by molten slag

    Wagner, C., Wenzl, C., Gregurek, D., Kreuzer, D., Luidold, S. & Schnideritsch, H., 2016, In: RHI bulletin : the journal of refractory innovations. 2016, 1, p. 62-67

    Research output: Contribution to journal › Article › Research

  43. Published

    Fast Scanning Calorimetry: Material characterization by fast scanning calorimetry: practice and applications

    Schawe, J. E. K. & Pogatscher, S., 2016, Springer. 3 p.

    Research output: Book/Report › Book › Research

  44. Published

    FFG-Endbericht: Agglomeration und schmelzmetallurgische Verwertung von metallhaltigen Reststoffen

    Zöhrer, M., Antrekowitsch, H. & Angerer, T., 2016

    Research output: Book/Report › Commissioned report › Research

  45. Published

    High temperature corrosion mechanisms of refractories and ferralloy slags

    Luidold, S., 2016.

    Research output: Contribution to conference › Presentation › Research › peer-review

  46. Published

    High temperature corrosion mechanisms of refractories and ferro-alloy slags

    Luidold, S., Wenzl, C., Wagner, C. & Sagadin, C., 2016.

    Research output: Contribution to conference › Paper

  47. Published

    HSC-Simulation des Schachtofens

    Sorger, C., 2016

    Research output: Book/Report › Commissioned report › Research

  48. Published

    HSC-Simulation eines pyrometallurgischen Aufarbeitungsprozesses für Elektronikschrott

    Sorger, C., 2016

    Research output: Book/Report › Commissioned report › Research

  49. Published

    Kinetische Untersuchungen zur Schlackenreduktion in der primären Kupferproduktion

    Wibner, S., 2016

    Research output: Thesis › Master's Thesis

  50. Published

    Konzepte zur Optimierung des Hartmetallrecyclings

    Ebner, T., 2016

    Research output: Thesis › Doctoral Thesis

  51. Published

    Markt- und Literaturüberblick: Flaschenverschlüsse aus Aluminium

    Ebenberger, P., 2016, 11 p.

    Research output: Other contribution › Research

Previous 1...12 13 14 15 16 17 18 19 ...48 Next
View graph of relations

Contact information

Erzherzog-Johann-Straße 3/II, 8700 Leoben
  • Main phone number: +43 3842 402 5201 oder 5204