Chair of Nonferrous Metallurgy (520)

Organisational unit: Chair

601 - 650 out of 2,400Page size: 50

Research output

  1. 2017
  2. Published

    Investigation of the Leaching Behavior of a Copper-Iron-Molybdenum Alloy in H2SO4

    Steinacker, S. & Antrekowitsch, J., 27 May 2017, ALTA 2017 Proceedings Nickel-Cobalt-Copper Conference. Perth, p. 306-313

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Erforschung des Feuerverzinkungsbades im Betrieb

    Scheiber, S., 23 May 2017, 2 p. Österreichische Forschungsförderungsgesellschaft.

    Research output: Other contribution › Transfer

  4. Published

    Investigation of the Leaching Behavior of a Copper-Iron-Molybdenum Alloy in H2SO4

    Steinacker, S., 23 May 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  5. Published

    Semi-direct recycling of cemented carbides in acid media

    Kücher, G. & Luidold, S., 12 May 2017.

    Research output: Contribution to conference › Poster › Research

  6. Published

    Determination of plastic properties of powders using single particle compression

    Bolitschek, J., 11 May 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    Hardness enhancement of tin alloys due to intermetallic compound formation

    Scheiber, S., 11 May 2017.

    Research output: Contribution to conference › Poster › Research

  8. Published

    Innovative solutions to reach a higher product quality: Report 3

    Benigni, C. & Antrekowitsch, J., 8 May 2017, 10 p.

    Research output: Book/Report › Commissioned report › Research

  9. Published

    Comparative kinetics analysis of materials used in drill bits

    Kerschbaumer, C. & Luidold, S., 28 Apr 2017, 155 p.

    Research output: Book/Report › Commissioned report › Research

  10. Published

    Herstellung von Ferronickel

    Sagadin, C., 26 Apr 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  11. Published

    Forschungstätigkeiten auf dem Gebiet des Recyclings von Jarosit und Stahlwerkstaub

    Wegscheider, S., 24 Apr 2017.

    Research output: Contribution to conference › Presentation › Research

  12. Published

    Forschungstätigkeiten im Bereich der Kupfermetallurgie

    Steinacker, S., 24 Apr 2017.

    Research output: Contribution to conference › Presentation › Research

  13. Published

    Hauptexkursion der Nichteisenmetallurgie 2016, Südafrika & Botswana

    Wegscheider, S. & Steinacker, S., 24 Apr 2017.

    Research output: Contribution to conference › Presentation › Transfer

  14. Published

    Jahresbericht InnoAlloy

    Scheiber, S. & Angerer, T., 24 Apr 2017, Österreichische Forschungsförderungsgesellschaft. 7 p.

    Research output: Book/Report › Commissioned report › Research

  15. Published

    The Role and Influence of Impurities on the Quality of Copper Cathodes

    Steinacker, S. & Antrekowitsch, J., 21 Apr 2017, Proceedings of MultiScience - XXXI. microCAD International Multidisciplinary Scientific Conference. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Zwischenbericht 3. Projektjahr InnoAlloy: Projektstand – NEM

    Scheiber, S., Angerer, T. & Antrekowitsch, H., 21 Apr 2017, 5 p.

    Research output: Book/Report › Commissioned report › Research

  17. Published

    The Role and Influence of Impurities on the Quality of Copper Cathodes

    Steinacker, S., 20 Apr 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  18. Published

    Metallurgie

    Scheiber, S., 27 Mar 2017, 2 p.

    Research output: Other contribution › Transfer

  19. Published

    Recyclingtechnik

    Scheiber, S., 23 Mar 2017, 2 p.

    Research output: Other contribution › Transfer

  20. Published

    Innovative solutions to reach a higher product quality: Report 2

    Benigni, C. & Antrekowitsch, J., 15 Mar 2017, 29 p.

    Research output: Book/Report › Commissioned report › Research

  21. Published

    KryoAlu2: Legierungsentwicklung

    Gruber, B., 9 Mar 2017

    Research output: Book/Report › Commissioned report › Research

  22. Published

    Herausforderungen beim Recycling wolframhaltiger Schrotte

    Luidold, S., 6 Mar 2017, Recycling und Rohstoffe. Berlin, Vol. 10. p. 155-163

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Laugungsverhalten von Kupfer aus einer Elektro- und Elektroaltgerätefraktion

    Sorger, C., Luidold, S. & Konetschnik, S., 6 Mar 2017, Recycling und Rohstoffe. Berlin, Vol. 10. p. 391-404

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Jahresbericht 2. Forschungsjahr AlMgMn-Legierungen

    Ebenberger, P. & Gerold, B., Mar 2017, 22 p.

    Research output: Book/Report › Commissioned report › Research

  25. Published

    Hot Deformation Properties of 5xxx Aluminum Alloys for Automotive Applications

    Ebenberger, P., 28 Feb 2017.

    Research output: Contribution to conference › Poster › Research

  26. Published

    Solute Distribution Analysis of Early Stages of Aging in Al-Mg-Si Alloys via Atom Probe Tomography

    Dumitraschkewitz, P., Rank, G., Sackl, S. C., Gerstl, S. S. A. & Pogatscher, S., 28 Feb 2017.

    Research output: Contribution to conference › Presentation › Research › peer-review

  27. Published

    Removal of fluorine from alkaline washing water with magnesium oxide: Endreport

    Benigni, C., 27 Feb 2017, 21 p.

    Research output: Book/Report › Commissioned report › Research

  28. Published

    Disclosure of the Kinetic Relations of Semidirect Cemented Carbide Leaching in Acid Media

    Kücher, G., Luidold, S., Czettl, C. & Storf, C., 20 Feb 2017, Rare Metal Technology 2017. p. 159-165 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Continuous hot dip galvanizing – Process chain and materials simulation

    Scheiber, S. & Antrekowitsch, H., 9 Feb 2017, 100 p.

    Research output: Book/Report › Commissioned report › Research

  30. Published

    Thermodynamic and Experimental Investigations of High-Temperature Refractory Corrosion by Molten Slags

    Wagner, C., Wenzl, C., Gregurek, D., Kreuzer, D., Luidold, S. & Schnideritsch, H., 1 Feb 2017, In: Metallurgical and materials transactions. B, Process metallurgy and materials processing science. 48.2017, February, p. 119-131 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Zwischenbericht - KryoAlu2

    Gruber, B. & Grabner, F., 1 Feb 2017, 26 p.

    Research output: Book/Report › Commissioned report › Transfer

  32. Published

    Innovative Concept for the Recovery of Silver and Indium by a Combined Treatment of Jarosite and Electric Arc Furnace Dust

    Wegscheider, S., Steinlechner, S. & Leuchtenmuller, M., Feb 2017, In: JOM. 69.2017, 2, p. 388-394 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  33. Published

    Abschlussbericht zur Entwicklung einer Aufarbeitungstechnologie für Salzschlacken

    Angerer, T. & Antrekowitsch, H., 30 Jan 2017, 42 p.

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  34. Published

    Analyse der Aluminium-Schrottproben der Fa. Müller Guttenbrunn GmbH

    Wibner, S. & Antrekowitsch, H., 2017

    Research output: Book/Report › Commissioned report › Research

  35. Published

    Anhebung der relevanten mechanischen & dynamischen Minimalkennwerte bei Luftfahrtplatten im 7xxx Legierungssystem durch metallurgische und thermomechanische Maßnahmen: FFG-Endbericht

    Kolb, G., 2017, 20 p.

    Research output: Book/Report › Commissioned report › Research

  36. Published

    Anwendung eines Metallbadprozesses zur Multimetallrückgewinnung aus komplexen Reststoffen

    Wegscheider, S., 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Arbeitsbereich Technologiemetalle: Grundlagen- und angewandte Forschung bezüglich der Gewinnung von Technologiemetallen aus Erzen sowie Sekundärrohstoffen (gebrauchte Artikel, Rückstände, Reststoffe, ...)

    Luidold, S., 2017.

    Research output: Contribution to conference › Poster › Research

  38. Published

    Characterisation of anode slimes with regard to a multi-metal recovery

    Otto, C., 2017

    Research output: Thesis › Master's Thesis

  39. Published

    Effect of Interrupted Quenching on Al‐Zn‐Mg‐Cu Alloys

    Kolb, G., Antrekowitsch, H., Pöschmann, D., Uggowitzer, P. J. & Pogatscher, S., 2017, Light Metals 2017. p. 385–389

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Evaluation of High Temperature Refractory Corrosion by Liquid Al2O3–Fe2O3–MgO–SiO2

    Sagadin, C., Luidold, S., Wenzl, C. & Wagner, C., 2017, 8th International Symposium on High-Temperature Metallurgical Processing. p. 161-168

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Extraktive Metallurgie von Technologiemetallen

    Luidold, S., 2017.

    Research output: Contribution to conference › Presentation › Research

  42. Published

    Gewindeoptimierung einer Titanradnabe in Kombination mit einer Stahlradmutter für Formel-1-Anwendungen

    Micelli, M., 2017

    Research output: Thesis › Master's Thesis

  43. Published

    High Temperature Refractory Corrosion by Liquid Ferronickel Slags

    Sagadin, C. & Luidold, S., 2017.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Hochtemperaturversuche im REM

    Kolb, G. & Kremmer, T., 2017.

    Research output: Contribution to conference › Poster › Research

  45. Published

    Hydrometallurgical Treatment of a Copper-Iron-Molybdenum Alloy

    Steinacker, S. & Antrekowitsch, J., 2017, In: World of metallurgy - Erzmetall : internationale Fachzeitschrift für Metallurgie. 70.2017, 6, p. 319-326 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Im Grenzflächenbereich: Bei der Suche nach geeigneten Recyclingverfahren für wolframhaltige Schrotte bestehen noch große Herausforderungen

    Luidold, S., 2017, In: ReSource. 2017, 3, p. 23 27 p.

    Research output: Contribution to journal › Article › Transfer

  47. Published

    Influence of Interrupted Quenching on microstructure and properties of 7xxx aluminium alloys

    Kolb, G., Antrekowitsch, H., Kremmer, T., Dumitraschkewitz, P., Uggowitzer, P. J., Pöschmann, D. & Pogatscher, S., 2017.

    Research output: Contribution to conference › Abstract › peer-review

  48. Published

    Metallurgical Process Development for the Treatment of a Copper-Iron-Molybdenum Alloy

    Steinacker, S., 2017

    Research output: Thesis › Doctoral Thesis

  49. Published

    Modifizierte 5xxx-Aluminiumknetlegierungen für den Einsatz als Strukturgusswerkstoff in der Automobilindustrie

    Stemper, L., 2017

    Research output: Thesis › Master's Thesis

  50. Published

    Optimierung von Aluminium-Knetlegierungen der 7xxx-Serie

    Kolb, G., 2017

    Research output: Thesis › Doctoral Thesis

  51. Published

    Phase formation in Co(Ru)-Zn diffusion couples

    Ebner, T., Luidold, S., Antrekowitsch, H., Storf, C. & Czettl, C., 2017. 1 p.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1...9 10 11 12 13 14 15 16 ...48 Next
View graph of relations

Contact information

Erzherzog-Johann-Straße 3/II, 8700 Leoben
  • Main phone number: +43 3842 402 5201 oder 5204