Chair of Mechanics (400)

Organisational unit: Chair

701 - 750 out of 809Page size: 50

Research output

  1. 2004
  2. Published

    A numerical model for Transformation Induced Plasticity (TRIP)

    Antretter, T., Fischer, F. D. & Cailletaud, G., 1 Dec 2004, In: Journal de physique / 4. 115, p. 233-241 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Application of the thermodynamic extremal principle to the diffusional phase transformation

    Svoboda, J., Gamsjäger, E., Fischer, F. D. & Fratzl, P., 2004, In: Acta materialia. 52, p. 959-967

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Erstellung von MKS-Modellen und Programmierung von Kraftelementen

    Leindl, M., 2004

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  5. Published

    Influence of non-metallic inclusions on the austenite-to-ferrite phase transformation

    Gamsjäger, E., Fischer, F. D. & Svoboda, J., 2004, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 365, p. 291-297

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Mikromechanische Modelle zur Austenit/Ferritumwandlung in niedriglegierten Stählen

    Gamsjäger, E., 2004, Distortion Engineering - Verzugsbeherrschung in der Fertigung Kolloquium Band 2. p. 61-76

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Modified Evolution Equations for the Precipitation Kinetics of Complex Phases in Multi-Component Systems

    Kozeschnik, E., Svoboda, J. & Fischer, F. D., 2004, In: Calphad. 28, p. 379-382

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Motion of diffusional transformation fronts in multi-component systems

    Gamsjäger, E., 2004, In: Journal de physique / 4. p. 79-84

    Research output: Contribution to journal › Article › Research › peer-review

  9. 2003
  10. Published

    Effect of back stress evolution due to martensitic transformation on iso-volume fraction lines in a Cr-Ni-Mo-Al-Ti maraging steel

    Tanaka, K., Terasaki, T., Goto, S., Antretter, T., Fischer, F. D. & Cailletaud, G., 20 Jan 2003, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 341, 1-2, p. 189-196 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Diffusional phase transformation in low alloy steels – Theory and application to continuous casting

    Gamsjäger, E., 2003

    Research output: Book/Report › Book › Research

  12. Published

    Experimental and numerical investigations of the mechanics of martensitic transformation

    Antretter, T., 2003

    Research output: Thesis › Habilitation thesis › peer-review

  13. Published

    Influence of substitutional alloying elements on the austenite-ferrite phase transformation in iron alloys

    Gamsjäger, E., Fischer, F. D. & Svoboda, J., 2003, International Symposium on Transformation and Deformation Mechanisms in High Strength Steels. p. 187-201

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Interaction of Phase Transformation and Diffusion in Steels

    Gamsjäger, E., Fischer, F. D. & Svoboda, J., 2003, In: Journal of Engineering Materials and Technology (Transactions of the American Society of Mechanical Engineers / H : ASME). 125, p. 22-26

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Optimized Shape Memory Dampers Modelling and Application

    Oberaigner, E., Antretter, T., Fischer, F. D. & Tanaka, K., 2003, Proceedings of the Third World Conference on Structural Control. p. 561-582

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. 2002
  17. Published

    Back stress evolution and iso-volume fraction lines in a Cr-Ni-Mo-Al-Ti maraging steel in the process of martensitic transformation

    Nagayama, K., Terasaki, T., Goto, S., Tanaka, K., Antretter, T., Fischer, F. D., Cailletaud, G. & Azzouz, F., 25 Oct 2002, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 336, 1-2, p. 30-38 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Theory, experiments and numerical modelling of phase transformations with emphasis on TRIP

    Antretter, T., Fischer, F. D., Tanaka, K. & Cailletaud, G., 1 Jun 2002, In: Steel research international. 73, 6-7, p. 225-235 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Austenite-to-Ferrite Phase Transformation during Continuous Casting of Steels

    Gamsjäger, E., Fischer, F. D., Chimani, C. M. & Svoboda, J., 2002, In: International Journal of Forming Processes. 4, p. 551-572

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Influence of solute segregation and drag on properties of migrating interfaces

    Gamsjäger, E., Fischer, F. D. & Svoboda, J., 2002, In: Acta materialia. 50, p. 967-977

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    On the Optimal Damping of a Vibrating Shape Memory Alloy Rod

    Oberaigner, E., Fischer, F. D. & Tanaka, K., 2002, In: Journal of Engineering Materials and Technology (Transactions of the American Society of Mechanical Engineers / H : ASME). 124, p. 97-102

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Schulungsunterlagen "Numerische Strömungssimulation"

    Leindl, M., Seewald, G. & Grogger, H., 2002

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  23. Published

    Simulation of the Damping of a Shape Memory Alloy Rod by using the Likhachev Model

    Pushtshaenko, O., Oberaigner, E., Antretter, T., Fischer, F. D. & Tanaka, K., 2002, In: Journal of intelligent material systems and structures. 13, p. 817-823

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    The Thermo-mechanical Response to a General Loading Path of a Martensitically Transforming Steel

    Antretter, T., Fischer, F. D., Lube, T., Tanaka, K. & Cailletaud, G., 2002, In: Journal of intelligent material systems and structures. 13, 12, p. 881-815

    Research output: Contribution to journal › Article › Research › peer-review

  25. 2001
  26. Published

    Mechanical properties of a Cr-Ni-Mo-Al-Ti maraging steel in the process of martensitic transformation

    Nagayama, K., Terasaki, T., Tanaka, K., Fischer, F. D., Antretter, T., Cailletaud, G. & Azzouz, F., 30 Jun 2001, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 308, 1-2, p. 25-37 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Susceptibility to failure of the constituents of particulate two-phase composites

    Antretter, T. & Fischer, F. D., 1 Jan 2001, In: International Journal of Damage Mechanics. 10, 1, p. 56-72 17 p.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    A Micromechanical Model of Interphase Boundary Movement during Solid-Solid Phase Transformations

    Fischer, F. D. & Oberaigner, E., 2001, In: Archive of applied mechanics. 71, p. 193-205

    Research output: Contribution to journal › Article › Research › peer-review

  29. Published

    Diffusional Phase Transformations in Steel – Theory and Application to Continuous Casting

    Gamsjäger, E., Chimani, C. M., Fischer, F. D. & Svoboda, J., 2001, In: Journal de physique / 4. 11, p. 149-156

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Kinetics of Interfaces during Diffusional Transformation

    Svoboda, J., Fischer, F. D., Fratzl, P., Gamsjäger, E. & Simha, N. K., 2001, In: Acta materialia. 49, p. 1249-1259

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Konstruktion eines verstellbaren Rungensystems für Rund- und Schnittholztransport

    Leindl, M., 2001

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  32. Published

    Large Strain Concentrations During Continuous Casting; A micromechanical study of the diffusional phase transformation

    Gamsjäger, E., Fischer, F. D., Chimani, C. M. & Svoboda, J., 2001, Proceedings of the 4th international ESAFORM Conference on Material Forming. p. 871-874

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. 2000
  34. Published

    Deformation behavior of elastic-plastic materials containing instantly transforming inclusions

    Antretter, T. & Fischer, F. D., 1 Dec 2000, Key engineering materials. Vol. 177-180 II. p. 431-436 6 p. (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  35. Published

    The role of backstress in phase transforming steels

    Fischer, F. D., Antretter, T., Azzouz, F., Cailletaud, G., Pineau, A., Tanaka, K. & Nagayama, K., 1 Dec 2000, In: Archives of Mechanics. 52, 4-5, p. 569-588 20 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    New view on transformation induced plasticity (TRIP)

    Fischer, F. D., Reisner, G., Werner, E., Tanaka, K., Cailletaud, G. & Antretter, T., 1 Jun 2000, In: International journal of plasticity. 16, 7, p. 723-748 26 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Applicability of the Hertz contact theory to rail-wheel contact problems

    Yan, W. & Fischer, F.-D., May 2000, In: Archive of applied mechanics. 70.2000, 4, p. 255-268 14 p.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Continuum Mechanical Aspects of Diffusional Phase Transformations in Steels – A Case Study for Continuous Casting

    Gamsjäger, E., Chimani, C. M., Fischer, F. D. & Svoboda, J., 2000, Proceedings EUROMAT 2000. p. 853-858

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Deformation, Stress State and Thermodynamic Force for a Transforming Spherical Inclusion in an Elastic-Plastic Material

    Fischer, F. D. & Oberaigner, E., 2000, In: Journal of applied mechanics (Transactions of the ASME / Journal of applied mechanics). 67, p. 793-796

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Effects of Solid Phase Transformation on Mechanical Properties during casting

    Gamsjäger, E., Chimani, C. M., Mörwald, K., Böhm, H. J. & Fischer, F. D., 2000, Proceedings of the Continuous Casting Conference, Linz, Austria, June 2000. p. 60/1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Interaction of Diffusional Transformation and Deformation in Steels

    Fischer, F. D., Chimani, C. M., Gamsjäger, E., Simha, N. K. & Svoboda, J., 2000, Plastic and Viscoplastic Response of Materials and Metal Forming. p. 181-183

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. 1999
  43. Published

    Micromechanical modelling of the deformation behaviour of gamma titanium aluminides

    Marketz, W. T., Fischer, F.-D. & Clemens, H., Aug 1999, In: Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques. 90.1999, 8, p. 588-593 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Damping of a vibrating SMA rod through phase transformation

    Oberaigner, E., Tanaka, K. & Fischer, F. D., 1999, IUTAM-Symposium on Variations of Domains and Free Boundary Problems in Soild Mechanics. p. 35-44

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  45. Published

    Damping of Rod Vibrations Caused by Impact

    Oberaigner, E., Tanaka, K. & Fischer, F. D., 1999, Proc. of SPIE, Mathematics and Control in Smart Structures, Vol. 3667. p. 566-577

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Interaction of Phase Transformation and Heat Production

    Fischer, F. D., Oberaigner, E., Wagendorfer, G. & Tanaka, K., 1999.

    Research output: Contribution to conference › Poster › Research › peer-review

  47. Published

    Interaction of Phase Transformation and Heat Production

    Fischer, F. D., Oberaigner, E., Wagendorfer, G. & Tanaka, K., 1999, Solid-Solid Phase Transformations. p. 1160-1163

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Unified Constitutive Equations for Phase Transformation and Thermoplasticity

    Tanaka, K., Fischer, F. D. & Oberaigner, E., 1999, IUTAM-Symposium on Micro- and Macrostructural Aspects of Thermoplasticity. p. 295-306

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  49. 1998
  50. Published

    Failure mechanisms of particulate two-phase composites

    Antretter, T. & Fischer, F. D., 1 Dec 1998, In: Materials Research Society symposium proceedings. 529, p. 151-156 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Particle cleavage and ductile crack growth in a two-phase composite on a microscale

    Antretter, T. & Fischer, F. D., 1 Dec 1998, In: Computational materials science. 13, 1-3, p. 1-7 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Damping of a vibrating SMA rod through phase transformation

    Oberaigner, E., Tanaka, K. & Fischer, F. D., 1998, Fortschritt-Berichte VDI. p. 209-218

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  53. Published

    Semiconductor Properties of Thin and Thick Film Ga2O3 Ceramic Layers

    Feltz, A. & Gamsjäger, E., 1998, In: Journal of the European Ceramic Society. 18, p. 2217-2226

    Research output: Contribution to journal › Article › Research › peer-review

  54. Published

    Shape memory Alloys (SMAs) - Their properties and their modelling

    Fischer, F. D., Oberaigner, E., Reisner, G., Sun, Q.-P. & Tanaka, K., 1998, In: Revue européenne des éléments finis : European journal of finite elements. 7, p. 9-34

    Research output: Contribution to journal › Article › Research › peer-review

  55. Published

    Transformation induced plasticity revised an updated formulation

    Fischer, F. D., Oberaigner, E., Tanaka, K. & Nishimura, F., 1998, In: International journal of solids and structures. 35, p. 2209 -2227

    Research output: Contribution to journal › Article › Research › peer-review

  56. 1997
  57. Published

    Critical shapes and arrangements of carbides in high-speed tool steel

    Antretter, T. & Fischer, F. D., 1 Sept 1997, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 237, 1, p. 6-11 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  58. Published

    A micromechanical approach to constitutive equations for phase changing materials

    Fischer, F. D., Oberaigner, E. & Tanaka, K., 1997, In: Computational materials science. 9, p. 56-63

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...11 12 13 14 15 16 17 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18/III, 8700 Leoben
  • Main phone number: +43 3842 402 4001