Chair of Mechanics (400)

Organisational unit: Chair

601 - 650 out of 809Page size: 50

Research output

  1. 2008
  2. Published

    Macro Modeling and Homogenization for Identification of Material Parameters to Simulate Phase Transformations

    Mahnken, R., Schneidt, A. & Antretter, T., 2008, Macro Modeling and Homogenization for Identification of Material Parameters to Simulate Phase Transformations. Civil-Comp Press, p. 1-13

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Measurment of All Six Components of X-Ray Elastic Factors

    Ortner, B., Antretter, T., Hofmann, M. & Werner, E., 2008, In: Materials Science Forum . 571-572, p. 225-229

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Mechanics of Sheared Bands – Applications to Faults, Twins and Variants

    Fischer, F. D., Antretter, T. & Oberaigner, E., 2008, In: Mechanics of materials. 40, p. 195-205

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Modeling of the thermo-mechanical behavior of pressure casting dies

    Ecker, W., 2008

    Research output: Thesis › Doctoral Thesis

  6. Published

    Near Surface Deformation of Rails and Wheels in a Curve and During Acceleration and Braking

    Daves, W. & Fischer, F. D., 2008, In: Vehicle system dynamics. 46, p. 71-83

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Numerical Investigation of Thermal Cracks in Pressure Die Casting Tools

    Leindl, M., Ecker, W., Antretter, T. & Ebner, R., 2008.

    Research output: Contribution to conference › Poster › Research › peer-review

  8. Published

    Numerische und experimentelle Untersuchung von Temperaturwechselrissnetzwerken

    Leindl, M., Ecker, W., Ebner, R. & Antretter, T., 2008, Numerische und experimentelle Untersuchung von Temperaturwechselrissnetzwerken. p. 157-174

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    On the Relation between the Principle of Maximum Dissipation and Inelastic Evolution Given by Dissipation Potentials

    Hackl, K. & Fischer, F. D., 2008, In: Proceedings of the Royal Society of London / A. 464, p. 117-132

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    On the Role of Surface Energy and Surface Stress in Phase-Transforming Nanoparticles

    Fischer, F. D., Waitz, T., Vollath, D. & Simha, N. K., 2008, In: Progress in materials science. 53, p. 481-527

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Physics, Chemistry and Mechanics are Growing Together – The Role of Nonequilibrium Thermodynamics

    Fischer, F. D. & Svoboda, J., 2008, Selected Topics of Contemporary Solid Mechanics. p. 404-405

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Simulation of Chemically Driven Inelastic Strain in Multi-Component Systems with Non-Ideal Sources and Sinks for Vacancies

    Svoboda, J., Fischer, F. D. & Gamsjäger, E., 2008, In: Acta materialia. 56, p. 351-357

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Size Effects on Martensitic Phase Transformations in Nanocrystalline NiTi Shape Memory Alloys

    Waitz, T., Antretter, T., Fischer, F. D. & Karnthaler, H.-P., 2008, In: Materials science and technology. 24, p. 934-940

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Solute drag or diffusion processes in a thick interface

    Gamsjäger, E., Svoboda, J. & Fischer, F. D., 2008, In: Philosophical magazine : Letters.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Thermodynamic Extremal Principle and its Application to Dufour and Soret Effects and Plasticity

    Svoboda, J., Fischer, F. D. & Vala, J., 2008, In: Atti della Accademia Peloritana dei Pericolanti, Classe di Scienze Fisiche, Matematiche e Naturali. LXXXVI, Suppl.1, p. 1-11

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Untersuchung des Risswachstums in einem Druckgießwerkzeug mit Hilfe der Finite-Elemente-Methode

    Leindl, M. F., 2008

    Research output: Thesis › Doctoral Thesis

  17. Published

    Void Growth due to Vacancy Supersaturation – A Non-equilibrium Thermodynamics Study

    Fischer, F. D. & Svoboda, J., 2008, In: Scripta materialia. 58, p. 93-95

    Research output: Contribution to journal › Article › Research › peer-review

  18. 2007
  19. Published

    Front end bending in plate rolling influenced by circumferential speed mismatch and geometry

    Philipp, M., Schwenzfeier, W., Fischer, F.-D., Wödlinger, R. & Fischer, C., 11 Jan 2007, In: Journal of materials processing technology. 184.2017, 1-3, p. 224-232 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    A new approach to modelling of non-steady grain growth

    Svoboda, J. & Fischer, F. D., 2007, In: Acta materialia. 55, p. 4467-4474

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    A note on the contact conditions at migrating interfaces

    Gamsjäger, E., 2007, In: Acta materialia. 55, p. 4823-4833

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    A Note on the Principle of Maximum Dissipation Rate

    Fischer, F. D. & Svoboda, J., 2007, In: Journal of applied mechanics (Transactions of the ASME / Journal of applied mechanics). 74, p. 923-926

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Bersten von Rohren - Modelle und Versuche

    Wasicek, M. & Fischer, F. D., 2007, Seminar Rohrherstellung und -Verarbeitung. p. 207-218

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  24. Published

    Calibration and validation of an elasto-viscoplastic material model for a hot work tool steel used in pressure casting dies

    Ecker, W., Antretter, T. & Ebner, R., 2007, Key engineering materials. Vol. 345-346. p. 685-688 (Key engineering materials).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  25. Published

    CERG Hong Kong

    Fischer, F. D. (Reviewer), 2007, 33 p.

    Research output: Other contribution › Transfer › peer-review

  26. Published

    Compressive Deformation of Lamellar Microstructures – A Short Review

    Fischer, F. D., Clemens, H., Schaden, T. & Appel, F., 2007, In: International journal of materials research : IJMR ; Zeitschrift für Metallkunde. 11, p. 1041-1046

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Diffusional phase transformations based on non-equilibrium thermodynamics: modelling and experiments

    Gamsjäger, E., 2007

    Research output: Thesis › Habilitation thesis › peer-review

  28. Published

    Energetic balance and kinetics for the decomposition of supersaturated Ti1-xAlx

    Mayrhofer, P. H., Fischer, F. D., Böhm, H.-J., Mitterer, C. & Schneider, J. M., 2007.

    Research output: Contribution to conference › Poster › Research › peer-review

  29. Published

    Energetic Balance and Kinetics for the Decomposition of Supersaturated Ti1-XAlXN

    Mayrhofer, P. H., Fischer, F. D., Böhm, H. J., Mitterer, C. & Schneider, J. M., 2007, In: Acta materialia. 55, p. 1441-1446

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Evolution of Phase Transitions - A Continuum Theory

    Fischer, F. D. (Reviewer), 2007, 250 p. Cambridge, UK

    Research output: Other contribution › Research

  31. Published

    Finite Element Simulation of the Effect of surface roughness on nanoindentation of thin films with spherical indenters

    Walter, C., Antretter, T., Daniel, R. & Mitterer, C., 2007, In: Surface & coatings technology. 202, p. 1103-1107

    Research output: Contribution to journal › Article › Research › peer-review

  32. Published

    Gutachten über eine Person: Kreher

    Fischer, F. D. (Reviewer), 2007

    Research output: Other contribution › Transfer › peer-review

  33. Published

    Gutachten über eine Person: Simha

    Fischer, F. D. (Reviewer), 2007

    Research output: Other contribution › Transfer › peer-review

  34. Published

    Gutachten über eine Person (Doz. Kozeschnik Greiner-Preis)

    Fischer, F. D. (Reviewer), 2007

    Research output: Other contribution › Transfer › peer-review

  35. Published

    Kinetics of Solute Driven Melting and Solidification

    Gamsjäger, E., Svoboda, J., Fischer, F. D. & Rettenmayr, M., 2007, In: Acta materialia. 55, p. 2599-2607

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Large Deformation Behavior of Lamellar g-TiAl-Based Alloys

    Schaden, T. & Fischer, F. D., 2007

    Research output: Book/Report › Book › Research

  37. Published

    Modelling of Precipitation Kinetics with Simultanous Stress Relaxation

    Fischer, F. D., Svoboda, J., Gamsjäger, E., Kozeschnik, E. & Sonderegger, B., 2007, Mater. Res. Soc. Symp. Proc.. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  38. Published

    Onsager's Principle: A Handy Tool in Modelling of Evolving Microstructures

    Svoboda, J. & Fischer, F. D., 2007, Modelling of Heterogeneous Materials with Applications in Construction and Biomedical Engineering. p. 316-317

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Optimal Damping Strategies for Shape Memory Alloy Rods

    Fischer, F. D. & Oberaigner, E., 2007, Multi-phases and multi-components materials under dynamic loading. p. 41-50

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Precipitation-Induced Nano-Twinning

    Fischer, F. D., Appel, F. & Clemens, H., 2007, Mater. Res. Soc. Symp. Proc.. p. 1-6

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    Precipitation Twinning

    Appel, F., Fischer, F. D. & Clemens, H., 2007, In: Acta materialia. 55, p. 4915-4923

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Simulation des Wärmeübergangs beim Sprühen im Druckgießprozess

    Hofer, P., Kaschnitz, E., Ecker, W. & Leindl, M., 2007, In: Gießerei-Rundschau. p. 166-168

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Size Effects on the Martensitic Martensitic Phase Transformation of NiTi Nanograins

    Waitz, T., Antretter, T., Fischer, F. D., Simha, N. K. & Karnthaler, H.-P., 2007, In: Journal of the mechanics and physics of solids. 55, p. 419-444

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Structural Fluctuations in Nanoparticles

    Vollath, D. & Fischer, F. D., 2007, In: Journal of nanoparticle research.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    The Morphology of Martensite in Nano-Structured NI-TI Alloys

    Antretter, T., Waitz, T. & Fischer, F. D., 2007, Proceedings of the 1st Seminar on The Mechanics of Multifunctional Materials. p. 1-4

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. 2006
  47. Published

    Modeling of massive transformation in substitutional alloys

    Svoboda, J., Gamsjäger, E. & Fischer, F. D., Jan 2006, In: Metallurgical and materials transactions. A, Physical metallurgy and materials science . 37, 1, p. 125-132 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    An Experimental and Theoretical Study on the Precipitation Behaviour of a Complex Steel

    Leitner, H., Bischof, M., Clemens, H., Erlach, S. D., Sonderegger, B., Kozeschnik, E., Svoboda, J. & Fischer, F. D., 2006, In: Advanced engineering materials. 8, p. 1066-1077

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    A Thick-Interface Model for Diffusive and Massive Phase Transformation in Substitutional Alloys

    Svoboda, J., Vala, J., Gamsjäger, E. & Fischer, F. D., 2006, In: Acta materialia. 54, p. 3953-3960

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Biaxial Strength Testing on Mini Specimens

    Danzer, R., Supancic, P., Harrer, W., Lube, T. & Börger, A., 2006, Fracture of Nano and Engineering Materials and Structures. Springer, p. 589-590

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Characterization and Simulation of Precipitation during Heat Treatment of the Hot-work Tool Steel X38 CrMoV 5-3

    Sonderegger, B., Kozeschnik, E., Bischof, M., Leitner, H., Clemens, H., Svoboda, J. & Fischer, F. D., 2006, Tooling Materials and their Application from Research to Market”. Editrice ANCORA, Edited by: M.Rosso, M.Actis Grande and D.Ugues, p. 553-540

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Competing Accommodation Mechanisms of the Martensite in Nanostructured NiTi Shape Memory Alloys

    Waitz, T. & Fischer, F. D., 2006.

    Research output: Contribution to conference › Poster › Research › peer-review

  53. Published

    Continuum Mechanics of Deformation Twinning – A Review

    Fischer, F. D., Schaden, T., Appel, F. & Clemens, H., 2006, In: Multidiscipline modeling in materials and structures. 2, p. 167-188

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...9 10 11 12 13 14 15 16 17 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18/III, 8700 Leoben
  • Main phone number: +43 3842 402 4001