Chair of Mechanical Engineering (140)

Organisational unit: Chair

181 - 200 out of 1,377Page size: 20

Research output

  1. 2020
  2. Published

    Investigation of the influence of viscoelastic behaviour on the lifetime of short fibre reinforced polymers

    Stadler, G., Primetzhofer, A., Jerabek, M., Pinter, G. & Grün, F., Dec 2020, In: Polymers. 12, 12, p. 1-13 13 p., 2874.

    Research output: Contribution to journal › Article › Research › peer-review

  3. E-pub ahead of print

    Fatigue strength estimation methodology of additively manufactured metallic bulk material

    Schneller, W., Leitner, M., Leuders, S., Sprauel, J. M., Grün, F., Pfeifer, T. & Jantschner, O., 4 Nov 2020, (E-pub ahead of print) In: Additive Manufacturing. 39.2021, March, 13 p., 101688.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Precise Correlation of Contact Area and Forces in the Unstable Friction between a Rough Fluoroelastomer Surface and Borosilicate Glass

    Wang, C., Bonyadi, S. Z., Grün, F., Pinter, G., Hausberger, A. & Dunn, A. C., 16 Oct 2020, In: Materials. 13.2020, 20, p. 1-16 16 p., 4615.

    Research output: Contribution to journal › Article › Research › peer-review

  5. E-pub ahead of print

    Investigation and simulation of the age-dependent behaviour of an aluminium alloy under thermomechanical loading

    Seisenbacher, B., Winter, G. & Grün, F., 15 Oct 2020, (E-pub ahead of print) In: Mechanics of materials. 151.2020, December, 11 p., 103612.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Effect of load stress ratio on nominal and effective notch fatigue strength assessment of HFMI-treated high-strength steel cover plates

    Leitner, M. & Stoschka, M., 1 Oct 2020, In: International Journal of Fatigue. 139, October, 7 p., 105784.

    Research output: Contribution to journal › Article › Research › peer-review

  7. E-pub ahead of print

    Cumulative damage assessment of tribological durability limits

    Pusterhofer, M., Summer, F., Gódor, I. & Grün, F., 6 Jul 2020, (E-pub ahead of print) In: Wear. 456-457.2020, 15 September, 15 p., 203318.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Validation of the fatigue strength assessment of HFMI-treated steel joints under variable amplitude loading

    Leitner, M., Stoschka, M., Barsoum, Z. & Farajian, M., 23 Jun 2020, In: Welding in the world. 64.2020, 10, p. 1681-1689 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    FEM Simulation Procedure for Distortion and Residual Stress Analysis of Wire Arc Additive Manufacturing

    Nursyahirah Binti Ahmad , S., Manurung, Y., Mat, M. F., Minggu, Z., Jaffar, A., Prüller, S. & Leitner, M., 22 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 2020, 834, 11 p., 012083.

    Research output: Contribution to journal › Conference article › peer-review

  10. Published

    Grain Growth Prediction of Bead-on-Plate with Filler Wire SS316L using FEM

    Faiz Mat, M., Manurung, Y. H. P., Muhammad, N., Ditler, A., Syakir Abd Ghani, M. & Leitner, M., 22 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 2020, 834, 012009.

    Research output: Contribution to journal › Conference article › peer-review

  11. Published

    Prediction of Crack Propagation Rate and Stress Intensity Factor of Fatigue and Welded Specimen with a Two-Dimensional Finite Element Method

    Olanrewaju Busari, Y., Ariri , A., Manurung, Y., Sebayang, D., Leitner, M., Zaini, W. S. B. W., Kamilzukairi, M. A. B. M. & E. Celik, E., 22 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 2020, 834, 14 p., 012008.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Validation Study on the Statistical Size Effect in Cast Aluminium

    Oberreiter, M., Pomberger, S., Leitner, M. & Stoschka, M., 27 May 2020, In: Metals : open access journal . 10.2020, 6, p. 710 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Effect of increased yield strength, R-ratio, and plate thickness on the fatigue resistance of high-frequency mechanical impact (HFMI)–treated steel joints

    Leitner, M. & Barsoum, Z., 13 May 2020, In: Welding in the world. 64.2020, 7, p. 1245-1259 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Evaluation of tensile and low-cycle fatigue properties at elevated temperatures in piston aluminum-silicon alloys with and without nano-clay-particles and heat treatment

    Azadi, M., Bahmanabadi, H., Grün, F. & Winter, G., 11 May 2020, In: Materials Science and Engineering A. 788.2020, 24 June, 16 p., 139497.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Probabilistic Surface Layer Fatigue Strength Assessment of EN AC-46200 Sand Castings

    Pomberger, S., Oberreiter, M., Leitner, M., Stoschka, M. & Thuswaldner, J., 9 May 2020, In: Metals : open access journal . 10.2020, 5, p. 616 26 p., 616.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Modelling the effect of ageing on the yield strength of an aluminium alloy under cyclic loading at different ageing temperatures and test temperatures

    Seisenbacher, B., Winter, G. & Grün, F., 13 Apr 2020, In: International Journal of Fatigue. 137.2021, August, 9 p., 105635.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg

    Schneller, W., Leitner, M., Springer, S., Grün, F. & Taschauer, M., 1 Apr 2020, Selective Laser Melting: Materials and Applications. p. 4-12

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  18. Published

    Influence of specimen diameter size on the deformation behaviour and short-term strength range of an aluminum alloy

    Seisenbacher, B., Klösch, R., Winter, G. & Grün, F., Apr 2020, In: MP materials testing : Materialprüfung . 62.2020, 4, p. 345-350 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Linear Elastic FE-Analysis of porous, laser welded, heat treatable, aluminium high pressure die castings based on X-ray computed tomography data

    Teichmann, F., Ziemer, A., Leitner, M., Hensel, J. & Dilger, K., 2 Mar 2020, In: Materials. 13, 6, 1420.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Tribologie im Maschinenbau: In Mobilität und anderen Bereichen

    Grün, F., 2 Mar 2020, Neue Technologien und Innovationen in der Fahrzeugtechnik XVII.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Fatigue crack growth model including load sequence effects – Model development and calibration for railway axle steels

    Maierhofer, J., Gänser, H. P., Simunek, D., Leitner, M., Pippan, R. & Luke, M., 1 Mar 2020, In: International Journal of Fatigue. 132.2020, March, 11 p., 105377.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...6 7 8 9 10 11 12 13 ...69 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 1401