Chair of Mechanical Engineering (140)

Organisational unit: Chair

151 - 200 out of 1,376Page size: 50

Research output

  1. 2021
  2. Published

    Phenomenological wear model of case-hardened 20MnCr5 under cyclic line rolling contact

    Trausmuth, A., Godor, I. & Grün, F., 15 Apr 2021, In: Wear. 470, 15 April, 16 p., 203607.

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Fatigue strength assessment of additively manufactured metallic structures considering bulk and surface layer characteristics

    Schneller, W., Leitner, M., Pomberger, S., Grün, F., Leuders, S., Pfeifer, T. & Jantschner, O., Apr 2021, In: Additive Manufacturing. 40.2021, April, 12 p., 101930.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    Model Calibration and Data Set Determination Considering the Local Micro-Structure for Short Fiber Reinforced Polymers

    Primetzhofer, A., Stadler, G., Pinter, G. & Grün, F., 27 Jan 2021, In: Journal of composites science. 5.2021, 2, 11 p., 40.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Influence of thermomechanical fatigue loading conditions on the nanostructure of secondary hardening steels

    Hofinger, M., Seisenbacher, B., Landefeld, A., Ognianov, M., Turk, C., Leitner, H. & Schnitzer, R., 20 Jan 2021, In: Materials science and engineering: A, Structural materials: properties, microstructure and processing. 802.2021, 20 January, 11 p., 140672.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Impact of microstructural properties on the crack threshold of aluminium castings

    Oberreiter, M., Aigner, R., Pomberger, S., Leitner, M. & Stoschka, M., Jan 2021, In: Engineering Fracture Mechanics. 241, 10 p., 107431.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Simulation of dynamic and meta-dynamic recrystallization behavior of forged Alloy 718 parts using a multi-class grain size model

    Gruber, C., Raninger, P., Stanojevic, A., Godor, F., Rath, M., Kozeschnik, E. & Stockinger, M., Jan 2021, In: Materials. 14, 1, p. 1-15 15 p., 111.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    About the wear assessment of valve train components using an experimental screening methodology

    Gussmagg, J., 2021

    Research output: Thesis › Master's Thesis

  9. Published

    Berücksichtigung der Viskoelastizität in der Betriebsfestigkeitsanalyse von kurzfaserverstärkten Kunststoffen

    Stadler, G., 2021

    Research output: Thesis › Doctoral Thesis

  10. Published

    Charakterisierung und Modellierung von Konstruktionswerkstoffen unter thermomechanischer Beanspruchung

    Seisenbacher, B., 2021

    Research output: Thesis › Doctoral Thesis

  11. Published

    Comparison of evaluation methods regarding the tooth root stress for spur and helical gears in pulsator tests

    Fiedler, F., 2021

    Research output: Thesis › Master's Thesis

  12. Published

    Eigenspannungsstabilität von Ti-6Al-4V Strukturkomponenten

    Stanojevic, A., 2021

    Research output: Thesis › Doctoral Thesis

  13. Published

    Entwicklung eines Prüfkonzeptes für die hochfrequente Ermüdungsprüfung von kleinen, bauteilähnlichen Proben

    Klösch, R., 2021

    Research output: Thesis › Master's Thesis

  14. Published

    Fatigue strength assessment of additively manufactured 17-4PH structures considering surface layer effects and residual stresses

    Entfellner, P., 2021

    Research output: Thesis › Master's Thesis

  15. Published

    Fatigue strength assessment of additively manufactured metallic structures based on a macroscale approach

    Schneller, W., 2021

    Research output: Thesis › Doctoral Thesis

  16. Published

    FEM Analysis of Fatigue Crack Growth in Low Carbon Steel Using Single Edge Notched Tension Specimen

    Busari, Y. O., Manurung, Y. H. P., Shuaib-Babata, Y. L., Leitner, M. & Celik, E., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 645-655 11 p. (Lecture Notes in Mechanical Engineering; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Grain Growth Prediction of SS316L Stainless Steel of Bead-On-Plate Using Numerical Computation

    Mat, M. F., Manurung, Y. H. P. M., Muhammad, N., Ahmad, S. N., Adenan, M. S. & Leitner, M., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 1-11 11 p. (Lecture Notes in Mechanical Engineering; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Grid Load Mitigation in EV Fast Charging Stations Through Integration of a High-Performance Flywheel Energy Storage System with CFRP Rotor

    Buchroithner, A., Presmair, R., Haidl, P., Wegleiter, H., Thormann, B., Kienberger, T., Auer, P. & Domitner, J., 2021, 2021 IEEE Green Energy and Smart Systems Conference, IGESSC 2021. Institute of Electrical and Electronics Engineers, (2021 IEEE Green Energy and Smart Systems Conference, IGESSC 2021).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Implementierung des lokalen Rissschließverhaltens in die numerische Rissfortschrittssimulation

    Gaugelhofer, A. J., 2021

    Research output: Thesis › Master's Thesis

  20. Published

    Influence of the Cemented Carbides Composition on the Disintegration in Liquid Zinc

    Ebner, T., Luidold, S., Czettl, C. & Storf, C., 2021, Ni-Co 2021: The 5th International Symposium on Nickel and Cobalt. Anderson, C., Goodall, G., Gostu, S., Gregurek, D., Lundström, M., Meskers, C., Nicol, S., Peuraniemi, E., Tesfaye, F., Tripathy, P. K., Wang, S. & Zhang, Y. (eds.). p. 329-343 15 p. (Minerals, Metals and Materials Series).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    In-plant observations and thermomechanical modeling of different vessel types applying an insulation layer

    Rebouillat, L. & Jin, S., 2021, AISTech 2021 - Proceedings of the Iron and Steel Technology Conference. Association for Iron and Steel Technology, AISTECH, p. 1667-1673 7 p. (AISTech - Iron and Steel Technology Conference Proceedings; vol. 2021-June).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  22. Published

    Investigation of Material Property Model on Substrate Deformation Induced by Thick-Walled WAAM Process Using Numerical Computation

    Ahmad, S. N., Manurung, Y. H. P., Mat, M. F. & Leitner, M., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 747-761 15 p. (Lecture Notes in Mechanical Engineering; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Mechanische und thermische Simulation eines Formel 1 Einzylinder-Prüfstandsmotors bei extrem hohen Spitzendrücken

    Kübler, P., 2021

    Research output: Thesis › Master's Thesis

  24. Published

    Microstructural characterization of neutron irradiated mineral concrete aggregates

    Arregui-Mena, J. D., Weber, J., Tunes, M. A., Torrence, C. E., Rosseel, T. M., Maruyama, I. & Edmondson, P. D., 2021, In: Transactions of the American Nuclear Society. 124, 1, p. 312-313 2 p.

    Research output: Contribution to journal › Conference article › peer-review

  25. Published

    Modelling the durability of sliding contacts

    Pusterhofer, M., 2021

    Research output: Thesis › Doctoral Thesis

  26. Published

    Modelscale methodology for the tribological characterization of novel highly stressed journal bearing systems

    Renhart, P., 2021

    Research output: Thesis › Doctoral Thesis

  27. Published

    Neue Verfahren zur Betriebsfestigkeitsbewertung von randschichtgehärteten Bauteilen

    Dobberke, D., 2021

    Research output: Thesis › Doctoral Thesis

  28. Published

    Numerical Simulation on Residual Stress and Substrate Deformation of Bead-On-Plate of SS316L Using Inherent Strain Method

    Ahmad, S. N., Manurung, Y. H. P., Taufek, T. & Leitner, M., 2021, Recent Trends in Manufacturing and Materials Towards Industry 4.0 - Selected Articles from iM3F 2020, Malaysia. Osman Zahid, M. N., Abdul Sani, A. S., Mohamad Yasin, M. R., Ismail, Z., Che Lah, N. A. & Mohd Turan, F. (eds.). p. 723-738 16 p. (Lecture Notes in Mechanical Engineering; vol. 46).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  29. Published

    Numerische Analysen zur Schweißpfadplanung komplexer WAAM-Strukturen

    Prüller, S., 2021

    Research output: Thesis › Master's Thesis

  30. Published

    On an experimental-computational approach for localised durability assessment of sliding contacts

    Pusterhofer, M. & Grün, F., 2021, In: Wear. 486-487.2021, 15 December, 18 p., 204068.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Synthesis, Properties and Performance of selected hard and wear resistant Coatings for Metal Cutting Applications

    Friedrich, B. E., 2021

    Research output: Thesis › Master's Thesis

  32. 2020
  33. Published

    Investigation of the influence of viscoelastic behaviour on the lifetime of short fibre reinforced polymers

    Stadler, G., Primetzhofer, A., Jerabek, M., Pinter, G. & Grün, F., Dec 2020, In: Polymers. 12, 12, p. 1-13 13 p., 2874.

    Research output: Contribution to journal › Article › Research › peer-review

  34. E-pub ahead of print

    Fatigue strength estimation methodology of additively manufactured metallic bulk material

    Schneller, W., Leitner, M., Leuders, S., Sprauel, J. M., Grün, F., Pfeifer, T. & Jantschner, O., 4 Nov 2020, (E-pub ahead of print) In: Additive Manufacturing. 39.2021, March, 13 p., 101688.

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Precise Correlation of Contact Area and Forces in the Unstable Friction between a Rough Fluoroelastomer Surface and Borosilicate Glass

    Wang, C., Bonyadi, S. Z., Grün, F., Pinter, G., Hausberger, A. & Dunn, A. C., 16 Oct 2020, In: Materials. 13.2020, 20, p. 1-16 16 p., 4615.

    Research output: Contribution to journal › Article › Research › peer-review

  36. E-pub ahead of print

    Investigation and simulation of the age-dependent behaviour of an aluminium alloy under thermomechanical loading

    Seisenbacher, B., Winter, G. & Grün, F., 15 Oct 2020, (E-pub ahead of print) In: Mechanics of materials. 151.2020, December, 11 p., 103612.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Effect of load stress ratio on nominal and effective notch fatigue strength assessment of HFMI-treated high-strength steel cover plates

    Leitner, M. & Stoschka, M., 1 Oct 2020, In: International Journal of Fatigue. 139, October, 7 p., 105784.

    Research output: Contribution to journal › Article › Research › peer-review

  38. E-pub ahead of print

    Cumulative damage assessment of tribological durability limits

    Pusterhofer, M., Summer, F., Gódor, I. & Grün, F., 6 Jul 2020, (E-pub ahead of print) In: Wear. 456-457.2020, 15 September, 15 p., 203318.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Validation of the fatigue strength assessment of HFMI-treated steel joints under variable amplitude loading

    Leitner, M., Stoschka, M., Barsoum, Z. & Farajian, M., 23 Jun 2020, In: Welding in the world. 64.2020, 10, p. 1681-1689 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    FEM Simulation Procedure for Distortion and Residual Stress Analysis of Wire Arc Additive Manufacturing

    Nursyahirah Binti Ahmad , S., Manurung, Y., Mat, M. F., Minggu, Z., Jaffar, A., Prüller, S. & Leitner, M., 22 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 2020, 834, 11 p., 012083.

    Research output: Contribution to journal › Conference article › peer-review

  41. Published

    Grain Growth Prediction of Bead-on-Plate with Filler Wire SS316L using FEM

    Faiz Mat, M., Manurung, Y. H. P., Muhammad, N., Ditler, A., Syakir Abd Ghani, M. & Leitner, M., 22 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 2020, 834, 012009.

    Research output: Contribution to journal › Conference article › peer-review

  42. Published

    Prediction of Crack Propagation Rate and Stress Intensity Factor of Fatigue and Welded Specimen with a Two-Dimensional Finite Element Method

    Olanrewaju Busari, Y., Ariri , A., Manurung, Y., Sebayang, D., Leitner, M., Zaini, W. S. B. W., Kamilzukairi, M. A. B. M. & E. Celik, E., 22 Jun 2020, In: IOP Conference Series: Materials Science and Engineering. 2020, 834, 14 p., 012008.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Validation Study on the Statistical Size Effect in Cast Aluminium

    Oberreiter, M., Pomberger, S., Leitner, M. & Stoschka, M., 27 May 2020, In: Metals : open access journal . 10.2020, 6, p. 710 22 p.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Effect of increased yield strength, R-ratio, and plate thickness on the fatigue resistance of high-frequency mechanical impact (HFMI)–treated steel joints

    Leitner, M. & Barsoum, Z., 13 May 2020, In: Welding in the world. 64.2020, 7, p. 1245-1259 15 p.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Evaluation of tensile and low-cycle fatigue properties at elevated temperatures in piston aluminum-silicon alloys with and without nano-clay-particles and heat treatment

    Azadi, M., Bahmanabadi, H., Grün, F. & Winter, G., 11 May 2020, In: Materials Science and Engineering A. 788.2020, 24 June, 16 p., 139497.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Probabilistic Surface Layer Fatigue Strength Assessment of EN AC-46200 Sand Castings

    Pomberger, S., Oberreiter, M., Leitner, M., Stoschka, M. & Thuswaldner, J., 9 May 2020, In: Metals : open access journal . 10.2020, 5, p. 616 26 p., 616.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Modelling the effect of ageing on the yield strength of an aluminium alloy under cyclic loading at different ageing temperatures and test temperatures

    Seisenbacher, B., Winter, G. & Grün, F., 13 Apr 2020, In: International Journal of Fatigue. 137.2021, August, 9 p., 105635.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Effect of HIP Treatment on Microstructure and Fatigue Strength of Selectively Laser Melted AlSi10Mg

    Schneller, W., Leitner, M., Springer, S., Grün, F. & Taschauer, M., 1 Apr 2020, Selective Laser Melting: Materials and Applications. p. 4-12

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  49. Published

    Influence of specimen diameter size on the deformation behaviour and short-term strength range of an aluminum alloy

    Seisenbacher, B., Klösch, R., Winter, G. & Grün, F., Apr 2020, In: MP materials testing : Materialprüfung . 62.2020, 4, p. 345-350 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Linear Elastic FE-Analysis of porous, laser welded, heat treatable, aluminium high pressure die castings based on X-ray computed tomography data

    Teichmann, F., Ziemer, A., Leitner, M., Hensel, J. & Dilger, K., 2 Mar 2020, In: Materials. 13, 6, 1420.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Tribologie im Maschinenbau: In Mobilität und anderen Bereichen

    Grün, F., 2 Mar 2020, Neue Technologien und Innovationen in der Fahrzeugtechnik XVII.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Fatigue crack growth model including load sequence effects – Model development and calibration for railway axle steels

    Maierhofer, J., Gänser, H. P., Simunek, D., Leitner, M., Pippan, R. & Luke, M., 1 Mar 2020, In: International Journal of Fatigue. 132.2020, March, 11 p., 105377.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...28 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 1401