Chair of Mechanical Engineering (140)

Organisational unit: Chair

851 - 900 out of 1,376Page size: 50

Research output

  1. 2011
  2. Published

    1. Zwischenbericht (FFG): FestOptAlGuss - Entwicklung von Materialmodellen für die festigkeitstechnische Optimierung von hochbelasteten Aluminium-Gusskomponenten

    Guster, C. & Redik, S., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  3. Published

    2. Zwischenbericht (FFG): Austempered Ductile Iron - Festigkeitssteigerung unter komplexer Betriebsbeanspruchung

    Wohlfahrt, M. & Guster, C., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  4. Published

    2. Zwischenbericht FFG-Bridge: Kunststoff-Funktionsbauteile

    Guster, C. & Mösenbacher, A., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  5. Published

    3. Zwischenbericht (FFG): Austempered Ductile Iron - Festigkeitssteigerung unter komplexer Betriebsbeanspruchung

    Wohlfahrt, M. & Guster, C., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  6. Published

    3. Zwischenbericht FFG-Bridge: Kunststoff-Funktionsbauteile

    Guster, C. & Mösenbacher, A., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  7. Published

    A 2D basin and petroleum systems modelling study an overthrust setting - The Alpine Molasse Basin, Austria

    Gusterhuber, J., Sachsenhofer, R. F. & Linzer, H. G., 2011, Society of Petroleum Engineers - 73rd European Association of Geoscientists and Engineers Conference and Exhibition 2011 - Incorporating SPE EUROPEC 2011. Society of Petroleum Engineers , p. 4919-4923 5 p. (73rd European Association of Geoscientists and Engineers Conference and Exhibition 2011: Unconventional Resources and the Role of Technology. Incorporating SPE EUROPEC 2011; vol. 7).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    A New Method to Describe Aspects of Welding Parameters on Fatigue Behaviour of High-Strength Steels

    Fössl, T., Leitner, M. & Eichlseder, W., 2011, Processing, Performance and Failure Analysis of Engineering Materials (ICF). p. 105-112

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    AP2: Erhöhung der Zuverlässigkeit und des Wirkungsgrades des Systems Kolbenring-Zylinderlaufbahn-Schmierstoff von Großgasmotoren

    Schiffer, J., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  10. Published

    AP3: Optimierung der Ventiltriebe von Großmotoren hinsichtlich Lebensdauer und Optimierung der Reibungsverluste

    Godor, I., Grün, F. & Magritzer, M., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    Aspects of Fretting on the Fatigue Endurance Limit

    Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2011, ECOTRIB 2011. p. 417-420

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Austempered Ductile Iron - Steigerung der mechanischen Werkstoffeigenschaften und Einflüsse auf die Schwingfestigkeit

    Wohlfahrt, M., Kainzinger, P. & Eichlseder, W., 2011, In: Gießerei-Rundschau. p. 261-267

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Beitrag zur Lebensdaueruntersuchung von wälzbeanspruchten Härteschichten unterschiedlicher Stähle

    Trausmuth, A., Godor, I., Stoschka, M., Dietrich, A., Marsoner, S. & Eichlseder, W., 2011, Maschinenelemente Lager und Welle-Nabe-Verbindung. p. 335-351

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Betriebsfeste Dimensionierung von faserverstärkten Kunststoffkomponenten – eine durchgängige Simulationskette von der Spritzgusssimulation zur Schädigungsrechnung

    Guster, C., Mösenbacher, A. & Pinter, G., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  15. Published

    Betriebsfeste Dimensionierung von faserverstärkten Kunststoffkomponenten - eine durchgängige Simulationskette von der Spritzgusssiumulation zur Schädigungsrechnung

    Guster, C., Pinter, G. & Mösenbacher, A., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 163-167

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Betriebslastmessung und Strukturoptimierung eines stationären Metallrecyclingsystems

    Richter, W., 2011

    Research output: Thesis › Diploma Thesis

  17. Published

    Bruchmechanische Lebensdauerbewertung von Aluminiumgussbauteilen mit Hilfe eines erweiterten Kitagawa-Diagramms

    Redik, S., Guster, C. & Eichlseder, W., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. 156, p. 275-280

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Comparision of Energy-Based and Damage-Related Fatigue Life Models for Aluminium Components Under TMF Loading

    Eichlseder, W., Winter, G., Gänser, H.-P., Minichmayr, R. & Riedler, M., 2011, Recent Trends in Processing and Degration of Aluminium Alloys. p. 329-346

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  19. Published

    Continious Simulation Loop for Fatigue Life Calculation of Short Fiber Reinforced Plastics Components

    Mösenbacher, A., Guster, C., Fleischer, H., Pinter, G. & Eichlseder, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  20. Published

    Contribution to the capability of filler metals to influence fatigue of butt joints: IIW_II-1775-11

    Stoschka, M., Leitner, M., Fössl, T. & Posch, G., 2011

    Research output: Non-textual form › Web publication/site › Transfer

  21. Published

    Contribution to the fatigue assessment of laser welded joints

    Stoschka, M., Thaler, M., Huemer, H. & Eichlseder, W., 2011, In: Procedia Engineering. 10, p. 1785-1790

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Describing different operating regimes of journal bearing materials by pressure velocity diagrams derived from ring-on-disc model testing

    Grün, F., Godor, I., Gärtner, W. & Eichlseder, W., 2011, In: Proceedings of the Institution of Mechanical Engineers. Part J, Journal of engineering tribology. p. 617-626

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Einbindung der Gießsimulation in die Topologieoptimierung auf Basis lokaler Werkstofffestigkeiten

    Kainzinger, P. & Eichlseder, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  24. Published

    Einfluss des Fertigungsprozesses auf die Betriebsfestigkeit

    Oberwinkler, B., 2011, Workshop Schmiedewerkzeuge. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Einflüsse auf die Schwingfestigkeit von Gusseisen und deren Einbindung in die Berechnung der Bauteillebensdauer

    Wohlfahrt, M., Oberwinkler, C., Tunzini, S., Rauscher, A., de la Prida Caballero, R. & Eichlseder, W., 2011, In: Giesserei-Praxis. p. 192-199

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Entwicklung einer Umlaufbiege-Prüfmaschine für die In-situ Untersuchung der Rissinitiierung und des mikrostrukturellen Rissfortschritts

    Huter, P., 2011

    Research output: Thesis › Diploma Thesis

  27. Published

    Entwicklung einer Versuchsmethodik zur Untersuchung von Frettingbeanspruchung

    Strohhäussl, B., 2011, 155 p.

    Research output: Thesis › Diploma Thesis

  28. Published

    Entwicklung eines technologischen Verfahrens zur Herstellung von Panzerschichten mit Hartstoffpartikeln

    Barwart, S., 2011

    Research output: Thesis › Diploma Thesis

  29. Published

    Evaluation of a Simulation Process for Fatigue Life Calculation of Short Fibre Reinforced Plastic Components

    Guster, C., Pinter, G., Mösenbacher, A. & Eichlseder, W., 2011, In: Procedia Engineering. 10, p. 2104-2109

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Evaluation of fillet weld properties and fatigue behaviour in dependence of welding parameters

    Leitner, M., Foessl, T., Stoschka, M. & Eichlseder, W., 2011, In: Archives of civil and mechanical engineering. 11, 3, p. 651-660

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Fatigue Behaviour of Austempered Ductile Iron (ADI) Considering the Technological Size Effect

    Wohlfahrt, M. & Eichlseder, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Fatigue Behaviour of High-Strength Steels using an Optimized Welding Process and High Frequency Peening Technology

    Leitner, M., Stoschka, M., Schörghuber, M. & Eichlseder, W., 2011, Global Trends in Joining Cutting and Surfacing Technology. p. 729-736

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    Fretting Fatigue and Wear: Experimental Investigations and Numerical Simulation

    Christiner, T., Reiser, J., Godor, I., Eichlseder, W., Trieb, F. & Stühlinger, R., 2011, SAE World Congress, Paper No. 2011-01-0199. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  34. Published

    Functionality of heterogeneous sliding materials for conformal contacts

    Grün, F., 2011

    Research output: Thesis › Habilitation thesis › peer-review

  35. Published

    Gefügeeinfluss auf die lokale Schwingfestigkeit verschiedener Gusswerkstoffe und Vorhersage mittels Erstarrungssimulation

    Wohlfahrt, M., Redik, S., Kainzinger, P. & Eichlseder, W., 2011, In: Gießerei-Rundschau. p. 216-223

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Importance of Residual Stresses and Surface Roughness Regarding Fatigue of Titanium Forgings

    Oberwinkler, B., Riedler, M. & Eichlseder, W., 2011, STP 1526 Fatigue and Fracture Mechanics. p. 489-503

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  37. Published

    In-situ observation of coupled growth morphologies in organic peritectics

    Mogeritsch, J. P. & Ludwig, A., 2011, In: IOP Conference Series: Materials Science and Engineering. 27, 1, 012028.

    Research output: Contribution to journal › Conference article › peer-review

  38. Published

    Integrated simulation of weld seam fatigue

    Thaler, M., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  39. Published

    Interactions between heterogeneous aluminium sliding materials and lubricants

    Grün, F., Summer, F., Pondicherry, K., Godor, I., Lainé, E. & Offenbecher, M., 2011, Proceedings of ECOTRIB Conference 2011. p. 703-708

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    LCF and TMF characterisation for an aluminium die cast alloy

    Huter, P. & Köberl, H., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Leichtbau, Betriebsfestigkeit und Verschleiß - Optimierung unter Berücksichtigung dreier konträrer Ziele am Beispiel hochbelasteter Schneidzähne

    Redik, S., Mösenbacher, A., Guster, C., Oberwinkler, C., Leitner, H. & Feyerer, C., 2011, Konsequenter Leichtbau und Festigkeitssteigerung - (k)ein Widerspruch?. p. 253-264

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Leichtbau, Betriebsfestigkeit und Verschleiß – Optimierung unter Berücksichtigung dreier konträrer Ziele am Beispiel hochbelasteter Schneidzähne

    Redik, S., Mösenbacher, A., Guster, C., Oberwinkler, C., Feyerer, C. & Leitner, H., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  43. Published

    Lifetime Enhancement of Welded High-Strength Steel Joints by High Frequency Peening Technology

    Leitner, M., Stoschka, M., Schanner, R. & Eichlseder, W., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Lifetime Enhancement of Welded High-Strength Steel Joints by High Frequency Peening Technology

    Leitner, M., Stoschka, M., Schanner, R. & Eichlseder, W., 2011, 28th Danubia-Adria Symposium on Advances in Experimental Mechanics. p. 59-60

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Lifetime optimization of hot forged aerospace components by linking microstructural evaluation and fatigue behaviour

    Maderbacher, H., Gänser, H.-P., Riedler, M., Stoschka, M., Stockinger, M. & Eichlseder, W., 2011, Euro Superalloys 2010. Trans Tech Publications, p. 162-167 (Advanced materials research; vol. 278).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Load-carrying Capacity Prediction of Different Plasma Nitrided and Case hardened Specimens under Rolling Contact Loading

    Trausmuth, A., Lengauer, M., Godor, I., Stoschka, M., Dietrich, A. & Eichlseder, W., 2011, Quality in Heat Treatment. p. 143-153

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Load-carrying Capacity Prediction of Different Plasma Nitrided, Case hardened and Quenched Specimens under Rolling Contact Loading

    Trausmuth, A., Godor, I., Stoschka, M., Dietrich, A. & Eichlseder, W., 2011, Tribosystems Reliability and Lifetime Assessment. p. 441-447

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Makrolunker in Gusseisen mit Kugelgraphit: Vorhersage durch Simulation und deren Einfluss auf die Schwingfestigkeit

    Kainzinger, P., Wohlfahrt, M. & Eichlseder, W., 2011, In: Gießerei-Rundschau. p. 106-110

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Material and component investigations on a Ti-6-4 fitting element

    Tan, W., Stoschka, M., Riedler, M., Eichlseder, W., Romagnoli, F. & Rondon, V., 2011, In: Mécanique & industries = Mechanics & industry. 12, 5, p. 361-378

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Methodenentwicklung zur Charakterisierung der Schwingfestigkeit von Schweißverbindungen hochfester Stähle

    Fössl, T., 2011, 126 p.

    Research output: Thesis › Doctoral Thesis

  51. Published

    Microscopy study of tribofilms formed on lubricated surfaces under different contact conditions

    Pondicherry, K., Grün, F., Godor, I., Krampl, H., Lainé, E. & Offenbecher, M., 2011, Proceedings of ECOTRIB Conference 2011. p. 575-580

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...14 15 16 17 18 19 20 21 ...28 Next
View graph of relations

Contact information

Franz-Josef-Strasse 18, 8700 Leoben
  • Main phone number: +43 3842 402 1401