Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

101 - 150 out of 1,629Page size: 50

Research output

  1. 2023
  2. Published

    ESTIMATION OF THE LIFE TIME OF 3D-PRINTED CONTINUOUS FIBER-REINFORCED COMPONENTS

    Petersmann, S., Kaylani, D., Stadler, G., Leßlhumer, J., Lammer, H., Arbeiter, F. & Pinter, G., 2023.

    Research output: Contribution to conference › Paper › peer-review

  3. Published

    Experimental and Numerical Investigation of Mechanical Metamaterials Produced by Selective Laser Sintering

    Huber, P., 2023

    Research output: Thesis › Master's Thesis

  4. Published

    From Single- to Multi-point – The Variable Properties of Polymers

    Pilz, G., 2023.

    Research output: Contribution to conference › Poster › Education › peer-review

  5. Published

    Immiscible Polymer Blends: Relationships between Processing Conditions, Morphology, and Mechanical Properties

    Corbillon Castro, P., 2023

    Research output: Thesis › Master's Thesis

  6. Published

    Improved nanoindentation methods for polymer based multilayer film cross-sections

    Christoefl, P., Jakes, J. E., Geier, J., Pinter, G., Oreski, G., Stone, D. & Teichert, C., 2023, 2023 24th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2023. Institute of Electrical and Electronics Engineers, (2023 24th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2023).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    INFLUENCE OF CREEP LOAD ON AGING AND FRACTURE MECHANIC BEHAVIOUR OF SHORT FIBRE REINFORCED PEEK

    Stadler, G. & Pinter, G., 2023.

    Research output: Contribution to conference › Paper › peer-review

  8. Published

    Investigation of background noise affecting AE data acquisition during tensile loading of FRPs

    Gfrerrer, M., Wiener, J., Brunner, A. J. & Pinter, G. G., 2023, e-Journal of Nondestructive Testing.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Methode zur Auswahl alternativer Materialpaarungen für Kunststoffrollen unter Beachtung anwendungsspezifischer Prüfmethoden

    Söllner, M., 2023

    Research output: Thesis › Master's Thesis

  10. Published

    Monitoring the sorting performance in lightweight packaging waste sorting plants using data of sensor-based sorters

    Schlögl, S., Schmölzer, G., Weber, A., Anditsch, A. & Aldrian-Tischberger, A., 2023, 6th International Conference on Optical Characterization of Materials, OCM 2023. Beyerer, J., Beyerer, J., Heizmann, M. & Längle, T. (eds.). p. 1-10 10 p. (Optical Characterization of Materials).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Recycling of multilayer packaging film

    Feuchter, M., 2023, Challenges, trends and solutions in developing and processing of recycled polymer materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Recycling of multilayer packaging film

    Feuchter, M., Plevová, K., Medvid, V. & Brenn, G., 2023, 31st Leoben-Conference on Polymer Engineering and Science: Circular Thinking in Polymer Technology. p. 37-39

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Schallemissionsanalyse während der zyklischen Belastung von kontinuierlich faserverstärkten Kunststoffen

    Gfrerrer, M., Wiener, J., Brunner, A. J. & Pinter, G., 2023, SCHALL 23: Entwicklung und Anwendung der Schallemissionsanalyse und Zustandsüberwachung mit geführten Wellen.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    STRESS- AND STRAIN-BASED FATIGUE LIFE CALCULATION FOR SHORT FIBER REINFORCED POLYMERS BY USE OF FE-SAFE®

    Kaylani, D., Primetzhofer, A., Stadler, G., Zacharias, T., Toenz, T. & Pinter, G., 2023.

    Research output: Contribution to conference › Paper › peer-review

  15. Published

    Untersuchung des Einflusses der chemischen Zusammensetzung von Polymer-basierten Beschichtungen auf Oberflächen- und Materialparameter und deren taktile Wirkung

    Grießer, M., 2023

    Research output: Thesis › Master's Thesis

  16. Published

    UV-stabilization of linseed oil-based epoxy resin

    Schwaiger, M., Schedler, M. & Resch-Fauster, K., 2023, Polymer Meeting 15: Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. 2022
  18. Published

    DENSITY BASED CLUSTERING AS A TOOL TO ANALYZE ACOUSTIC EMISSION SIGNALS

    Wiener, J., Gfrerrer, M., Schneider, C. & Pinter, G. G., 28 Dec 2022, Proceedings of the 20th European Conference on Composite Materials: Composites meet sustainability. Vol. 3. p. 883-890 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Towards virtually optimized curing cycles for polymeric encapsulations in microelectronics

    Schipfer, C., Gschwandl, M., Fuchs, P., Antretter, T., Feuchter, M., Morak, M., Tao, Q. & Schingale, A., Dec 2022, In: Microelectronics Reliability. 139.2022, December, 9 p., 114799.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Closed-loop recycling of packaging waste at the food manufacturer Freiberg

    Plevová, K., Feuchter, M., Wild, N., Wellacher, M., Jamnik, A. & Pichorner, H., 30 Oct 2022.

    Research output: Contribution to conference › Poster › Research

  21. Published

    Influence of Viscose Fibre Geometry on the Structure–Property Relationships of High-Density Polyethylene Composites

    Slapnik, J., Kraft, G., Wilhelm, T., Hribernik, M., Švab, I., Lucyshyn, T. & Pinter, G. G., 18 Oct 2022, In: Polymers. 14.2022, 20, 15 p., 4389.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Mechanical flexible epoxy resins with 100% bio-basedcarbon content based on epoxidized vegetable oils

    Schwaiger, M. & Resch-Fauster, K., 6 Oct 2022, In: Journal of Applied Polymer Science. 139.2022, 48, 11 p., e53233.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Powder ageing of Polyamide 6 in laser sintering and its effects on powder and component characteristics

    Stiller, T., Berer, M., Katta, A. D. K., Haar, B., Truszkiewicz, E., Kraschitzer, W., Stepanvosky, H., Pinter, G. G. & Lackner, J. M., Oct 2022, In: Additive Manufacturing. 58.2022, October, 14 p., 102987.

    Research output: Contribution to journal › Article › Research › peer-review

  24. E-pub ahead of print

    3D Printing of Dual-Cure Networks Based on (Meth)acrylate/Bispropargyl Ether Building Blocks

    Sommer, K., Rieger, P., Müller, S. M., Schwarz, R., Trimmel, G., Feuchter, M. & Grießer, T., 29 Sept 2022, (E-pub ahead of print) In: Advanced engineering materials. 2022, 7 p., 2200901.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Low-Temperature Fibre Direct Compounding of Cellulose Fibres into PA6

    Slapnik, J., Liu, Y., Kupfer, R., Lucyshyn, T., Nardin, B. & Pinter, G., 23 Sept 2022, In: Materials. 15.2022, 19, 14 p., 6600.

    Research output: Contribution to journal › Article › Research › peer-review

  26. E-pub ahead of print

    A review of parameters affecting success of lower-limb prosthetic socket and liners and implementation of 3D printing technologies

    Varsavas, S. D., Riemelmoser, F., Arbeiter, F. & Faller, L. M., 22 Sept 2022, (E-pub ahead of print) In: Materials Today: Proceedings. 70.2022, p. 425-430 6 p.

    Research output: Contribution to journal › Article › Research › peer-review

  27. Published

    Material selection and mechanical characterization of 3D-printable polymers for medical applications

    Petersmann, S., 15 Sept 2022.

    Research output: Contribution to conference › Poster › Research

  28. Published

    Temperature scanning stress relaxation (TSSR): a characterization opportunity for elastomeric crosslinked networks

    Azevedo, M., Monks, A. M., Kerschbaumer, R. C. & Pilz, G., 15 Sept 2022.

    Research output: Contribution to conference › Poster › Research

  29. Published

    Assessment of Epoxy Functionalized Poly(dimethylsiloxane) Vitrimers Catalyzed with Covalently Attached Amines as Reversible Adhesives

    Wanghofer, F., Wolfberger, A., Oreski, G. & Schlögl, S., Sept 2022, In: Macromolecular materials and engineering. 307.2022, 9, 9 p., 2200237.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    How to accelerate natural weathering of polymeric photovoltaic backsheets – A comparison with standardized artificial aging

    Ottersböck, B., Oreski, G. & Pinter, G. G., 15 Aug 2022, In: Solar energy materials and solar cells. 244.2022, 15 August, 7 p., 111819.

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Ermüdungsverhalten von 3D-gedrucktem endlosfaserverstärktem Polylactid

    Petersmann, S., Primetzhofer, A., Habicher, M., Lammer, H., Leßlhumer, J. & Arbeiter, F., 21 Jul 2022, Book of Abstracts Verbund 2022.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Mechanical flexible composites from renewable resources

    Schwaiger, M., Bender, M. & Resch-Fauster, K., 21 Jul 2022, Book of Abstracts - Verbund 2022.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. E-pub ahead of print

    Determination of Cyclic Load Limits for Plasma-Sprayed Copper Tracks on Material Extrusion-Based Printed Surfaces

    Stiller, T., Hausberger, A., Berer, M., Schwan, A. M., Hinterer, A., Spalt, S., Pinter, G. G. & Lackner, J. M., 19 Jul 2022, (E-pub ahead of print) In: Advanced engineering materials. 25.2023, 7, 12 p., 2200567.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Adapting the optical reflectivity of carbon fiber reinforced polymers on the nano-scale: Matrix vs. fiber modification

    Haiden, L., Feuchter, M., Barbezat, M., Pansare, A., Brunner, A. J., Neunkirchen, S. & Pinter, G. G., Jul 2022, European Polymer Congress - Book of Abstracts. p. 282

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Biodegradability of polymers – Laboratory scale vs. field scale test

    Wild, N., Feuchter, M., Schindler, P., Poczi, A., Gebeshuber, I. C., Vasiljevic, M., MacQueen , M., Pamminger, H. & Brandstätter, A., Jul 2022, EPF European Polymer Congress - Book of Abstracts. p. 594 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Effect of a Dicycloaliphatic Epoxide on the Thermo-Mechanical Properties of Alkyl, Aryl Epoxide Monomers Cured via UV-Induced Cationic Frontal Polymerization

    Malik, M. S., Wolfahrt, M., Sangermano, M. & Schlögl, S., Jul 2022, In: Macromolecular materials and engineering. 307.2022, 7, 10 p., 2100976.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Influence of layer architecture on fracture toughness and specimen stiffness in polymer multilayer composites

    Wiener, J., Arbeiter, F., Kolednik, O. & Pinter, G., Jul 2022, In: Materials and Design. 219.2022, July, 10 p., 110828.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Nano vs. recycling: a study of different fillers for thermosets

    Feuchter, M., Kern, W. & Sieberer, M., Jul 2022, EPF European Polymer Congress - Book of Abstracts. 1 ed. Prag, p. 272

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Recycling of multilayer films containing PE, PA6 and EVOH and their new application

    Plevova, K., Feuchter, M., Wild, N. & Pichorner, H., Jul 2022, EPF European Polymer Congress - Book of Abstracts. p. 730 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Tailoring the optical and UV reflectivity of CFRP-epoxy composites: Approaches and selected results

    Haiden, L., Brunner, A. J., Pansare, A., Feuchter, M. & Pinter, G. G., Jul 2022, 4th International Conference on Materials Design and Applications, MDA 2022, Book of Abstracts. p. 127

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  41. Published

    ADAPTING THE OPTICAL REFLECTIVITY OF CARBON FIBER REINFORCED POLYMERS ON THE NANO-SCALE: MATRIXVS. FIBER MODIFICATION

    Haiden, L., 30 Jun 2022.

    Research output: Contribution to conference › Poster › Research

  42. Published

    Consideration of orthotropic thermal properties of short fibre reinforced plastics

    Afsharnia, R., Stadler, G., Primetzhofer, A., Pinter, G. G. & Oswald-Tranta, B., 26 Jun 2022.

    Research output: Contribution to conference › Presentation › Research

  43. Published

    Influence of viscoelasticity on fatigue behaviour of short fibre reinforced polymers depending on mean stress and fibre orientation

    Stadler, G., Primetzhofer, A., Pinter, G. G. & Grün, F., 26 Jun 2022.

    Research output: Contribution to conference › Presentation › Research

  44. Published

    On the slow crack growth process and associated structure–property relationships in polyamide 12 grades

    Messiha, M., Frank, A., Arbeiter, F. & Pinter, G., 20 Jun 2022, In: Journal of applied polymer science. 139.2022, 24, 15 p., 52357.

    Research output: Contribution to journal › Article › Research › peer-review

  45. E-pub ahead of print

    Asymmetric chiral and antichiral mechanical metamaterials with tunable Poisson's ratio

    Fleisch, M., Thalhamer, A., Meier, G., Fuchs, P. F., Pinter, G., Schlögl, S. & Berer, M., 7 Jun 2022, (E-pub ahead of print) In: APL Materials. 10.2022, 6, 17 p., 061105.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Nano vs. recycling: a study of different fillers for thermosets

    Feuchter, M., Sieberer, M. & Kern, W., Jun 2022.

    Research output: Contribution to conference › Poster › Research

  47. Published

    Parameter Optimization of the ARBURG Plastic Freeforming Process by Means of a Design of Experiments Approach

    Hentschel, L., Petersmann, S., Gonzalez-Gutierrez, J., Kynast, F., Schäfer, U., Arbeiter, F. & Holzer, C., 31 May 2022, In: Advanced engineering materials. 24.2022, 11 p., 2200279.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Fatigue Analysis and Defect Size Evaluation of Filled NBR including Temperature Influence

    Schieppati, J., Schrittesser, B., Tagliabue, S., Andena, L., Holzner, A., Poduška, J. & Pinter, G. G., 24 May 2022, In: Materials. 15.2022, 11, 23 p., 3745.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    The Effects of Washing and Formaldehyde Sterilization on the Mechanical Performance of Poly(methyl Methacrylate) (PMMA) Parts Produced by Material Extrusion-Based Additive Manufacturing or Material Jetting

    Petersmann, S., Hentschel, L., Gonzalez-Gutierrez, J., Tödtling, M., Schäfer, U., Arbeiter, F. & Üçal, M., 13 May 2022, In: Advanced engineering materials. 24.2022, 2200225.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Peeling of Flexible Laminates—Determination of Interlayer Adhesion of Backsheet Laminates Used for Photovoltaic Modules

    Oreski, G. & Pinter, G., 4 May 2022, In: Materials. 15.2022, 9, 11 p., 3294.

    Research output: Contribution to journal › Article › Research › peer-review

  51. Published

    Combined Crack Initiation and Crack Growth Model for Multi-Layer Polymer Materials

    Pletz, M. & Arbeiter, F. J., 3 May 2022, In: Materials. 15.2022, 9, 13 p., 3273.

    Research output: Contribution to journal › Article › Research › peer-review

  52. Published

    Toward a new generation of vaginal pessaries via 3D-printing: Concomitant mechanical support and drug delivery

    Eder, S., Wiltschko, L., Koutsamanis, I., Afonso Urich, J. A., Arbeiter, F., Roblegg, E. & Spoerk, M., May 2022, In: European Journal of Pharmaceutics and Biopharmaceutics. 174.2022, May, p. 77-89 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1 2 3 4 5 6 7 8 ...33 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101