Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

951 - 1000 out of 1,630Page size: 50

Research output

  1. 2011
  2. Published

    Dynamisch mechanische Untersuchungen an PTFE Werkstoffen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  3. Published

    Effect of the process parameter yarn width on the mechanical and fatigue behaviour of braided composite materials

    Wolfahrt, M., Zaremba, S., Reden von, T. & Pinter, G., 2011, of the 16th International Conference on Composite Structures (ICCS16). p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Effects of the Processing History on the Crack Kinetics in a Polyethylene Pipe Grade

    Redhead, A., Frank, A. & Pinter, G., 2011, proceedings of Annual Technical Conference of the Society of Plastics Engineers (ANTEC). p. 1414-1418

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Einfluss der Faserarchitektur auf die mechanischen Eigenschaften und die Schadenstolerenz von Geflechtlaminaten

    Berger, I., Pinter, G. & Wolfahrt, M., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 187-181

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Einfluss von Defekten auf das Langzeitermüdungsverhalten von Composites

    Pinter, G., Wolfahrt, M. & Ladstätter, E., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  7. Published

    Einfluss von Defekten auf das Langzeit Ermüdungsverhalten von Composites

    Pinter, G., Wolfahrt, M. & Ladstätter, E., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 169-173

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    E-Muffen aus PE 100-RC bieten neue Möglichkeiten

    Haager, M., Brunbauer, J. & Carbon, R., 2011, In: Joining plastics=Fügen von Kunststoffen. 5, 3, p. 190-196

    Research output: Contribution to journal › Article › Research › peer-review

  9. Published

    Entwicklung einer In-Situ-Permeations-Mess-Apparatur für die Detektion von flüchtigen Kohlenwasserstoffen und die Messung der Permeationsrate an thermoplastischen Kunststoffrohren

    Bodor, C., 2011

    Research output: Thesis › Master's Thesis

  10. Published

    Ermittlung der HDT Formbeständigkeitstemperatur an 5 Harzwerkstoffen

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  11. Published

    Experimental and numerical characterization of the fretting fatigue behavior of elastomers

    Vezer, S. T., 2011, 158 p.

    Research output: Thesis › Doctoral Thesis

  12. Published

    Heizwendelschweißmuffen aus PE 100-RC Optimiertes Langzeitverhalten durch verbesserte Werkstoffe

    Haager, M., Brunbauer, J. & Carbon, R., 2011, In: 3 R. 4/5, p. 308-313

    Research output: Contribution to journal › Article › Research › peer-review

  13. Published

    Impact of chemical and physical properties of H-NBR based elastomers on the rapid gas decompression performance

    Schrittesser, B. & Pinter, G., 2011,

    Proceedings of High Performance Thermoplastics & Composites for Oil and Gas Applications

    .     p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Influence of the beadless welding technology on the properties of PP-R and PVDF joints

    Brunbauer, J., 2011, 104 p.

    Research output: Thesis › Master's Thesis

  15. Published

    Instrumentierter Durchstoßversuch an zwei Materialien bei -20 °C

    Stelzer, S. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  16. Published

    Instrumentierter Durchstoßversuch an zwei Materialien bei Raumtemperatur

    Stelzer, S. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  17. Published

    Investigation of the chemical resistance and the material aging conditions of polyethylene for pipe applications

    Redhead, A., Frank, A. & Pinter, G., 2011.

    Research output: Contribution to conference › Paper › peer-review

  18. Published

    Investigation of the chemical resistance and the material anging conditions of polyethylene for pipe applications

    Redhead, A., Frank, A. & Pinter, G., 2011, SPE-EUROTEC 2011. p. 1-5

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Irreversible deformation of isotactic polypropylene in the pre-yield regime

    Tscharnuter, D., Jerabek, M., Major, Z. & Pinter, G., 2011, In: European polymer journal. 47, p. 989-996

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Kerbschlaguntersuchungen an ABS-Compounds

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  21. Published

    Kerbschlaguntersuchungen an Erdölcutingproben

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  22. Published

    Mechanische Eigenschaften Nanopartikel-verstärkter Epoxidharze

    Pilz, G. & Stadelmann, S., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 181-185

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Mechanische Prüfungen an ABS-Mischungen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Mechanische Prüfungen an unterschiedlichen Polypropylentypen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  25. Published

    Mechanische und thermo-mechanische Untersuchungen an PIM Feedstock-Grünteilen

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  26. Published

    Mechanische Untersuchungen an mineralisch gefüllten Polypropylen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    Medienbeständigkeit von Polyethylen für Langzeitanwendungen

    Wetscher, S., 2011

    Research output: Thesis › Master's Thesis

  28. Published

    Microstructure optimization and structure-property relationships of thermoplastic nanocomposites

    Feuchter, M., 2011, 140 p.

    Research output: Thesis › Doctoral Thesis

  29. Published

    Mikroskopie an Bruchflächen mehrerer Bauteile

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  30. Published

    Morphologische Charakterisierung von extrudierten Polyethylen/Polypropylen-Platten

    Sinic, J., 2011

    Research output: Thesis › Master's Thesis

  31. Published

    Morphologische Charakterisierung von Stumpfschweißverbindungen in Polyethylen-Rohrleitungen

    Arbeiter, F., 2011

    Research output: Thesis › Master's Thesis

  32. Published

    Novel Concepts for the Characterization of the Delamination Resistance of Fiber Reinforced Polymer Laminates

    Singer, G., 2011, 98 p.

    Research output: Thesis › Master's Thesis

  33. Published

    On the determination of the relaxation modulus of PP compounds from arbitrary strain histories

    Tscharnuter, D., Jerabek, M., Major, Z. & Lang, R., 2011, In: Mechanics of time-dependent materials. 15, 1, p. 01-14

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Optimierte Auslegung durch druckabhängige nichtlinear viskoelastische Modellierung

    Tscharnuter, D., Gastl, S. & Pinter, G., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 142-152

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  35. Published

    Optimierte RTM-Struktur-Bauteile für automotive Anwendungen

    Pilz, G., Loike, S. & Lammer, H., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 175-197

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. Published

    Physikalische Prüfungen von Elastomer-Mischungen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  37. Published

    Potentiale von Faserverbundwerkstoffen für den Einsatz als Rotorkappenwerkstoff in Turbogeneratoren

    Endlweber, R., 2011, 72 p.

    Research output: Thesis › Master's Thesis

  38. Published

    Ramanspektroskopische Untersuchungen von Rohroberflächen

    Bruckmoser, K., Pinter, G. & Resch, K., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  39. Published

    Schadenstoleranz und interlaminares Risswachstum in Hochleistungsfaserverbundwerkstoffen

    Stelzer, S., Schillfahrt, C., Wolfahrt, M. & Pinter, G., 2011, 20. Leobener Kunststoff-Kolloquium: Polymerer Leichtbau. p. 83-92

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    Schlagbiegeuntersuchungen an gefüllten Polypropylenmischungen

    Feuchter, M. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    Smart Windows - Smart Collectors: Entwicklung und Charakterisierung von Überhitzungsschutzverglasungen für Gebäudeverglasungen und thermische Solarkollektoren

    Resch, K. & Weber, A., 2011, In: Berg- und hüttenmännische Monatshefte : BHM. 156, p. 429-433

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Statische Zugversuche an Compositerohren

    Stelzer, S. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Thermo-kalorimetrische Untersuchung an Duromerwerkstoffen

    Guttmann, P. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  44. Published

    Thermoplastische Faserverbundwerkstoffe im Automobilbau - Einsatzmöglichkeiten am Beispiel von CULT

    Wolfahrt, M., Kastanis, D. & Tscharnuter, D., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

  45. Published

    Thermoplastische Faserverbundwerkstoffe im Automobilbau – Einsatzmöglichkeiten am Beispiel von CULT

    Wolfahrt, M., Kastanis, D., Tscharnuter, D., Schledjewski, R. & Pinter, G., 2011, 20. Leobener Kunststoff-Kolloquium - Polymerer Leichtbau. p. 193-197

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    Thermotropic glazings for overheating protection applications: Tuning the light-shielding efficiency by systematic material prei-selection and formulation

    Weber, A. & Resch, K., 2011, 6th Energy Forum "Solar Buliding Skins". p. 73-77

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Thermotropic glazings for overheating protection of solar collectors: structure-property relationships

    Weber, A., Resch, K. & Schmid, A., 2011, 12th Experts Meeting IEA SHC Task 39. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Time-dependent poisson’s ratio of polypropylene compounds for various strain histories

    Tscharnuter, D., Jerabek, M., Major, Z. & Lang, R., 2011, In: Mechanics of time-dependent materials. 15, 1, p. 15-28

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Uniaxial nonlinear viscoelastic viscoplastic modeling of polypropylene

    Tscharnuter, D., Jerabek, M., Major, Z. & Pinter, G., 2011, In: Mechanics of time-dependent materials. 16, 3, p. 1-12

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    Untersuchung der Dispergierung von dem Arzneimittel Paracetamol in einer Kunststoffmatrix

    Resch, K. & Pinter, G., 2011

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  51. Published

    Untersuchung des Haftungsverhaltens von PV-Einbettfolien zu Glas und zum Rückseitenlaminat

    Oreski, G., Pinter, G. & Knausz, M., 2011.

    Research output: Contribution to conference › Poster › Research › peer-review

Previous 1...16 17 18 19 20 21 22 23 ...33 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101