Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

701 - 750 out of 1,629Page size: 50

Research output

  1. 2014
  2. Published

    Characterisation of quasi-brittle fatigue crack growth in pipe grade polypropylene block copolymer

    Arbeiter, F., Pinter, G. & Frank, A., 2014, In: Polymer Testing. 37, p. 186-192

    Research output: Contribution to journal › Article › Research › peer-review

  3. Published

    Characterization of Crack Initiation and Slow Crack Growth Resistance of PE100 and PE100-RC pipe Grades with Cyclic Cracked Round Bar Tests

    Frank, A., Berger, I. J., Arbeiter, F. & Pinter, G., 2014, Proceedings of the 17 th Plastic Pipes Conference PPXVII. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  4. Published

    Characterization of the damping behavior of thin films with dynamic mechanic analysis in bending mode

    Knapp, G., Leyrer, M., Oreski, G. & Pinter, G., 2014, ASME 2014 International Mechanical Engineering Congress & Exposition . p. 1-7

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  5. Published

    Comparison of quasi-static and cyclic fatigue delamination resistance of CFRP under different mode loading

    Stelzer, S., 2014, Proceedia Materials Science. p. 000-000

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Composite to composite joint with lightweight metal reinforcement for enhanced damage tolerance

    Ucsnik, S., Stelzer, S., Sehrschön, H. & Sieglhuber, G., 2014, Composite to composite joint with lightweight metal reinforcement for enhanced damage tolerance. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  7. Published

    Correlation of Fracture Mechanics Based Lifetime Prediction and Internal Pipe Pressure Tests

    Pinter, G., Frank, A., Berger, I. J. & Arbeiter, F., 2014, Proceedings of the 17 th Plastic Pipes Conference PPXVII. p. 1-10

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  8. Published

    Crosslinking and post-crosslinking of EVA in PV modules

    Oreski, G., Rauschenbach, A., Hirschl, C., Eder, G. C. & Pinter, G., 2014, 6th World Conference on Photovoltaic Energy Conversion. p. 1-2

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  9. Published

    Crosslinking and post-crosslinking of EVA in PV modules

    Oreski, G., Rauschenbach, A., Hirschl, C., Eder, G. C. & Pinter, G., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  10. Published

    Cyclic loading of polyetheretherketone at high tensile stress levels

    Berer, M., Major, Z., Pinter, G., Constantinescu, D. M. & Marsavina, L., 2014, Experimental Stress Analysis and Materials 14. Trans Tech Publications, p. 12-16 5 p. (Key Engineering Materials; vol. 601).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  11. Published

    Dehnratenabhängige Werkstoffcharakterisierung und -modellierung faserverstärkter Kunststoffe

    Hirth, C., Wolfahrt, M., Körber, H. & Hinterdorfer, S., 2014, Schriftenreihe Kunststofftechnik Leoben Band 04. p. 59-68

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Design independent lifetime assessment method for PCBs under low cycle fatigue loading conditions

    Fuchs, P. F., Pinter, G. & Krivec, T., 2014, 15th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Determination of aging for different TPE-components

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  14. Published

    Determination of aging for three different components

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  15. Published

    Determination of crack growth kinetics in non-reinforced semi-crystalline thermoplastics using the linear elastic fracture mechanics (LEFM) approach

    Pinter, G. & Berer, M., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  16. Published

    Determination of input parameters for a mix-mode cohesive zone formulation in a novel metal-CFRP-joining interface

    Kronsteiner, J., Ucsnik, S. & Stelzer, S., 2014, Proceedings of ECCM16. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  17. Published

    Determination of mechanical properties

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  18. Published

    Determination of slow crack growth behaviour of polyethylene pressure pipes with cracked round bar test

    Kratochvilla, T., Andreas, F. & Pinter, G., 2014, In: Polymer Testing. 40, p. 299-303

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Dynamische Charakterisierung von Schienenbefestigungskomponenten aus polymeren Werkstoffen im Eisenbahnoberbau

    Schneider, C., 2014, 91 p.

    Research output: Thesis › Master's Thesis

  20. Published

    Effect of processing conditions on mechanical properties and morphology of poly(lacitc acid) staple fibers

    Bruckmoser, K. & Resch, K., 2014,

    Programm & Abstract Booklet

    .     p. 19-19

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Einfluss der Herstellungsparameter auf die mechanischen Eigenschaften von endlosfaserverstärkten Polyurethanharzlaminaten

    Gloggnitzer, S. & Pilz, G., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  22. Published

    Einfluss der Herstellungsparameter auf die mechanischen Eigenschaften von endlosfaserverstärkten Polyurethanharzlaminaten

    Gloggnitzer, S. & Pilz, G., 2014, 23. Leobener Kunststoff-Kolloquium: Hocheffizeinte Verbundwerkstoffe. p. 175-179

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  23. Published

    Elementanalyse metallischer Fremkörper

    Klein, A. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  24. Published

    Elongational flow generating devices for the improvement of mechanical properties of PP-PNCs

    Friesenbichler, W., Battisti, M., Chitu, L. & Feuchter, M., 2014, 6th International PMI Conference Proceedings. p. 139-143

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Entwicklung und Simulation tribologischer Testmethoden in der Dichtungstechnik

    Hausberger, A., 2014, 168 p.

    Research output: Thesis › Doctoral Thesis

  26. Published

    Ermittlung dynamischer Kennlinien an drei unterschiedlichen Bauteilen

    Hinterdorfer, S. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  27. Published

    Erweiterung der klassischen Laminattheorie zur Berechnung ermüdungsinduzierter Steifigkeitsabfälle in CFK

    Brunbauer, J., Pinter, G. & Wolfahrt, M., 2014, Schriftenreihe Kunststofftechnik Leoben Band 4. p. 53-57

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  28. Published

    Erweiterung der klassischen Laminattheorie zur Berechnung ermüdungsinduzierter Steifigkeitsabfälle in CFK

    Maier, J., Wolfahrt, M. & Pinter, G., 2014.

    Research output: Contribution to conference › Presentation › Research

  29. Published

    Evaluation of the applicability of the cracked round bar test as standardized PE-pipe ranking tool

    Frank, A. & Pinter, G., 2014, In: Polymer Testing. 38, p. 161-171

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Faserverstärkte Polyamide und der Einfluss der Wasseraufnahme auf deren mechanisches und thermo-mechanisches Verhalten

    Guttmann, P., Röper, F. & Pilz, G., 2014, Tagungsband Polymertec 2014. p. 372-377

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  31. Published

    Fatigue behavior of through the thickness reinforced joints

    Stelzer, S., Ucsnik, S., Sehrschön, H., Tauchner, J. & Pinter, G., 2014, Fatigue behavior of through the thickness reinforced joints. p. 1-1

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  32. Published

    Fatigue behaviour of continuously carbon fibre reinforced plastics

    Brunbauer, J., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  33. Published

    Fatigue delamination growth in CFRP composites: Fixed Ratio Mixed Mode I/II compared with Mode I and Mode II

    Stelzer, S., Pinter, G., Brunner, A. & Terrasi, G. P., 2014.

    Research output: Contribution to conference › Poster › Research

  34. Published

    Fatigue design methodology of reinforced engineering thermoplastics

    Maier, J., Mösenbacher, A. & Pinter, G., 2014.

    Research output: Contribution to conference › Presentation › Research

  35. Published

    Fatigue life prediction of carbon fibre reinforced laminates by using cycle-dependent classical laminate theory

    Brunbauer, J. & Pinter, G., 2014, In: Composites / B. p. 167-174

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Feasibility study of the correlation between damp heat test and accelerated weathering test methods for backsheets

    Hirschmann, B., Oreski, G. & Pinter, G., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  37. Published

    Feasibility study of the correlation between damp heat test and accelerated weathering test methods for backsheets

    Hirschmann, B., Oreski, G. & Pinter, G., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  38. Published

    Fracture Mechanical Characterization of Nanocomposite Hydrogels

    Klein, A., Whitten, P. G., Resch, K. & Pinter, G., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  39. Published

    FRACTURE MECHANICS LIFETIME PREDICTION OF PRESSURIZED POLYOLEFIN PIPES

    Pinter, G. & Frank, A., 2014, Proceedings 31 ENCUENTRO DEL GRUPO ESPAÑOL DE FRACTURA. p. 17-23

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  40. Published

    HDT measurements and Charpy tests on different materials

    Gloggnitzer, S. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  41. Published

    HDT measurements on different materials

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  42. Published

    HDT measurements on different resin materials and flexural tests on CSM-Laminate

    Gloggnitzer, S., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  43. Published

    Herstellung von PLA-Stapelfasern

    Bruckmoser, K. & Resch, K., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  44. Published

    Influence of the manufacturing parameters on mechanical properties of polyurethane based composites

    Gloggnitzer, S. & Pilz, G., 2014, Proceedings ECCM16.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Investigation of Ageing Mechanisms in Thermoplastic Polyurethanes by Means of IR and Raman Spectroscopy

    Bruckmoser, K. & Resch, K., 2014, In: Macromolecular Symposia. p. 70-83

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Investigation of the dynamic mechanical behavior of Polyetheretherketone (PEEK) in the high stress tensile regime

    Berer, M., Major, Z., Pinter, G., Constantinescu, D. M. & Marsavina, L., 2014, In: Mechanics of time-dependent materials. 18, p. 663-684

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Investigations on the Tribological Behaviour of engineering polymers

    Schwab, M., Hausberger, A., Godor, I. & Pinter, G., 2014, 13th IMEKO TC15 Youth Symposium on Experimental Solid Mechanics 2014. p. 108-111 4 p. (13th IMEKO TC15 Youth Symposium on Experimental Solid Mechanics 2014).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  48. Published

    Kompressions- und Zugversuche an Schäumen

    Hinterdorfer, S. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Longitudinal rail restraint tests of rail damping pads

    Föttinger, J. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  50. Published

    Material Ranking of Polyethylene Pipe grades with Cyclic CRB Tests

    Frank, A. & Pinter, G., 2014, Pipes in Infrastructure 2014. p. 32-32

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Mechanical properties, fatigue damage and microstructure of carbon/epoxy laminates depending on fibre volume content

    Brunbauer, J., Pinter, G. & Stadler, H., 2014, In: International Journal of Fatigue. 70, p. 85-92

    Research output: Contribution to journal › Article › Research › peer-review

Previous 1...11 12 13 14 15 16 17 18 ...33 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101