Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

651 - 700 out of 1,629Page size: 50

Research output

  1. 2015
  2. Published

    Einfluss der Herstellungsparameter auf die mechanischen Eigenschaften von endlosfaserverstärkten Polyurethanharzlaminaten

    Gloggnitzer, S. & Pilz, G., 2015.

    Research output: Contribution to conference › Poster › Research

  3. Published

    Einfluss des Aushärtegrades auf wesentliche Werkstoffeigenschaften von Epoxidharz-Faserverbundwerkstoffen

    Wolfahrt, M. & Pilz, G., 2015.

    Research output: Contribution to conference › Presentation › Transfer

  4. Published

    Epoxy-anhydride based thermosets reinforced by surface modified inorganic nanoparticles: Effects on cure kinetics, thermal and thermo-mechanical properties

    Wanner, A. J., Moser, A., Brasch, M., Porubsky, T., Feuchter, M., Pinter, G. & Kern, W., 2015.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    Epoxy anhydride based therosets reinforced by surface modified inorganic nanoparticles: effects on cure kinetics, thermal and thermo-mechanical properties

    Wanner, A. J., Moser, A., Brasch, M., Porubsky, T., Feuchter, M., Pinter, G. & Kern, W., 2015, PPS2015 - Book of Abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  6. Published

    Eruieren geeigneter Charakterisierungsmethoden zur Bestimmung des Gleitmittel-Rückhaltevermögens von PTFE während der Pastenextrusion

    Deisl, R., 2015

    Research output: Thesis › Master's Thesis

  7. Published

    Evaluation of long-term properties of polymeric pipe grade materials using fatigue tests and fracture mechanics

    Arbeiter, F., 2015

    Research output: Thesis › Doctoral Thesis

  8. Published

    Evaluation of the Influence of Climate and Microclimate on the Ageing Behaviour of PV

    Hirschmann, B., Oreski, G., Wagner, F. S. & Pinter, G., 2015.

    Research output: Contribution to conference › Poster › Research

  9. Published

    Fatigue Delamination Growth in CFRP Composites: From Pure Mode I and Mode II to Mixed Mode I/II

    Stelzer, S. & Pinter, G., 2015, Materials Science Forum. Vol. 825-826.2015. p. 914-921 9 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  10. Published

    Fatigue-induced damage mechanisms in carbon/epoxy laminates influenced by mean stress and fibre volume content

    Maier, J. & Pinter, G., 2015.

    Research output: Contribution to conference › Presentation › Research

  11. Published

    Fatigue-induced damage mechanisms in carbon/epoxy laminates influenced by mean stress and fibre volume content

    Maier, J. & Pinter, G., 2015, ICCM20 - 20th International Conference on Composite Materials Proceedings.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  12. Published

    Fatigue of continuously fibre reinforced composites - Engineering approaches to fatigue-life prediction

    Brunbauer, J., 2015

    Research output: Thesis › Doctoral Thesis

  13. Published

    Improvement of mechanical behavior of polypropylene nanocomposites varying nanoclays and compatibilizers

    Battisti, M. G., Sundaresan, A., Guttmann, P. & Friesenbichler, W., 2015, ANTEC 2015 - Proceedings of the Annual Technical Conference and Exhibition of the Society of Plastics Engineers. p. 532-536 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  14. Published

    Influence of polymeric encapsulation materials on quality and reliability of PV modules

    Knausz, M., 2015

    Research output: Thesis › Doctoral Thesis

  15. Published

    Influence of post processing change of the fracture mechanical properties of polyoxymethylene (POM)

    Berer, M., Feuchter, M. & Pinter, G., 2015, PPS2015 - Book of Abstract.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  16. Published

    Influence of the acrylonitrile content on the mechanical properties of elastomeric materials

    Schrittesser, B., Pinter, G., Schwarz, T., Kadar, Z. & Nagy, T., 2015, In: GAK : Gummi, Fasern, Kunststoffe. 68, 11

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Lifetime of polyethylene geomembranes for water proofing of tunnels from the perspective of polymer engineering

    Frank, A., Bredacs, M., Brasch, M., Pinter, G. & Nitsche, D., 2015, Proceedings EUROCK 2015 & 64th Geomechanics Colloquium. Vol. 64.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  18. Published

    Mechanical and Thermal Characterisation of Epoxy Insulation with Inorganic Fillers

    Pothukuchi, H. K. R., Fuchs, P. & Stelzer, S., 2015.

    Research output: Contribution to conference › Poster › Research

  19. Published

    Mechanical and thermo-mechanical behaviour of aliphatic polyketones in wet environments

    Guttmann, P. & Pilz, G., 2015, European Corrosion Congress, EUROCORR 2015. ASMET, p. 1420 1 p. (European Corrosion Congress, EUROCORR 2015; vol. 3).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  20. Published

    Method to characterize the damping behavior of thin passively constrained layer laminates using dynamic mechanical analysis (DMA) in shear mode

    Knapp, G., Oreski, G. & Pinter, G., 2015, In: Polymer Testing. 42, p. 215 224 p.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Mode I, Mode II and fixed ratio mixed I/II fatigue delamination of different carbon fiber reinforced composite laminates

    Stelzer, S., Brunner, A. J. & Pinter, G., 2015.

    Research output: Contribution to conference › Paper › peer-review

  22. Published

    (Nano)Composite mit hoher Wärmeleitfähigkeit

    Wanner, A. J., Moser, A., Feuchter, M. & Kern, W., 2015.

    Research output: Contribution to conference › Presentation › Research

  23. Published

    Novel composite-composite joining technology with through thickness reinforcement for enhanced damage tolerance

    Stelzer, S., Ucsnik, S. & Pinter, G., 2015.

    Research output: Contribution to conference › Presentation › Research

  24. Published

    Point load effect on the buried polyolefin pipes lifetime

    Hutař, P., Majer, Z., Frank, A., Sevcik, M., Zouhar, M., Pinter, G. & Náhlík, L., 2015, In: Polymer engineering and science.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    POLYMER-PHYSICAL ANALYSIS OF UNUSUAL MORPHOLOGICAL EFFECTS IN NATURAL FIBRE COMPOSITES

    Resch, K., Su, X., Gong, S. & Wool, R., 2015, Proceedings of 20th International Conference on Composite Materials.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  26. Published

    Potential and properties of soft polymeric composites produced from renewable resources

    Resch, K., Gong, S., Sauerbrunn, S. & Wool, R., 2015, Proceedings of Polymer Processing Society Conference (PPS) 2015, Graz, Austria.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  27. Published

    Potentials and Limitations of Vibrational Spectroscopy for the Characterisation of Polymers

    Bruckmoser, K., 2015

    Research output: Thesis › Doctoral Thesis

  28. Published

    Restlebenszeitmodellierung von Polyethylen-Rohren auf Basis des Arrhenius-Konzepts

    Kaufmann, M., 2015

    Research output: Thesis › Master's Thesis

  29. Published

    Software-basierte Methode zur Lebensdauerabschätzung endlosfaserverstärkter Kunststoffe

    Maier, J., Gaier, C., Stelzer, S. & Pinter, G., 2015.

    Research output: Contribution to conference › Presentation › Research

  30. Published

    Stiffness and strength based models for the fatigue-life prediction of continuously fiber reinforced composites

    Maier, J. & Pinter, G., 2015, In: Advanced materials research. 825-826, p. 960-967

    Research output: Contribution to journal › Article › Research › peer-review

  31. Published

    Technische Polymere für Tribo-Anwendungen Möglichkeiten und Herausforderungen

    Hausberger, A., Godor, I., Grün, F. & Pinter, G., 2015.

    Research output: Contribution to conference › Presentation › Research

  32. Published

    The influence of nanoscale particles on the mechanical, thermal and thermo-mechanical properties of anhydride based epoxy systems

    Feuchter, M., Moser, A., Wanner, A. J., Kern, W. & Pinter, G., 2015, EPF 2015 - Book of abstracts. p. 163 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  33. Published

    The physics of light reflection and absorption of structured materials: novel methodologies for material simulation and testing

    Gruber, D. P., 2015

    Research output: Thesis › Habilitation thesis › peer-review

  34. Published

    Thermal expansion behavior of solar cell encapsulation materials

    Knausz, M., Oreski, G., Schmidt, M., Guttmann, P., Berger, K. A., Voronko, Y., Eder, G., Koch, T. & Pinter, G., 2015, In: Polymer Testing. 44, p. 160-167

    Research output: Contribution to journal › Article › Research › peer-review

  35. Published

    Thermoforming of polymer laminate films: Thermo-viscoelastic characterization

    Truszkiewicz, E., Tscharnuter, D., Pilz, G. & Pinter, G., 2015, Mechanics of Solids, Structures and Fluids. American Society of Mechanical Engineers(ASME), (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE); vol. 9-2015).

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  36. 2014
  37. Published

    Fracture Mechanical Analysis of Two Commercial Polyoxymethylene Homopolymer Resins

    Berer, M., Pinter, G. & Feuchter, M., 5 Oct 2014, In: Journal of Applied Polymer Science. 131, 19

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Definition of stress intensity factor development and determination of crack growth kinetics in multi layer polypropylene pipes

    Arbeiter, F., Hutař, P., Pinter, G. & Frank, A., 17 Sept 2014.

    Research output: Contribution to conference › Presentation › Research

  39. Published

    Fracture toughness of high density polyethylene: Fatigue precracking versus femtolaser, razor sharpening and broaching

    Salazar, A., Rodriguez, J., Arbeiter, F., Pinter, G. & Martínez, A. B., 17 Sept 2014.

    Research output: Contribution to conference › Presentation › Research

  40. Published

    Composite to composite joint with lightweight metal reinforcement for enhanced damage tolerance

    Ucsnik, S., Stelzer, S., Sehrschön, H. & Sieglhuber, G., 25 Jun 2014.

    Research output: Contribution to conference › Presentation › Research

  41. Published

    Determination of input parameters for a mix-mode cohesive zone formulation of a novel metal-CFRP-joining interface

    Kronsteiner, J., Ucsnik, S. & Stelzer, S., 25 Jun 2014.

    Research output: Contribution to conference › Presentation › Research

  42. Published

    Fatigue behavior of through the thickness reinforced joints

    Stelzer, S., Ucsnik, S., Sehrschön, H., Tauchner, J. & Pinter, G., 22 Jun 2014.

    Research output: Contribution to conference › Presentation › Research

  43. Published

    Untersuchungen von stumpfgeschweißten PE-Rohren mit bruchmechanischen Methoden

    Arbeiter, F., 14 Jun 2014.

    Research output: Contribution to conference › Presentation › Research

  44. Published

    Alterungsbestimmungen an Kupplungsreiblamellen

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  45. Published

    Application Relevant Polymer Testing - Impact of Media on the Viscoelastic Behaviour of Engineering Polymers

    Guttmann, P., Pilz, G. & Oelzant, D., 2014, EUROCORR 2014 - Book of Abstracts. p. 527-527

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  46. Published

    BADGE/Aminhärter-Systeme für die Verklebung von Isolationskompositen

    Zhang, Z., Moser, A., Feuchter, M., Wieser, B., Mühlbacher, I., Pinter, G., Schwarz, R., Pukel, G. J. & Wiesbrock, F., 2014, Leobener Kunststoff-Kolloquium. p. 207-212

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Bestimmung temperaturabhängiger Eigenschaften

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  48. Published

    Bestimmung von Qualitätskriterien für Verpackungsfolien

    Feuchter, M. & Pinter, G., 2014

    Research output: Book/Report › Commissioned report › Transfer › peer-review

  49. Published

    Biogene Kunststoffe für solartechnische Applikationen

    Klein, A. & Resch, K., 2014.

    Research output: Contribution to conference › Poster › Research › peer-review

  50. Published

    Bioplastics for solar collector components

    Klein, A. & Resch, K., 2014, BiPoCo 2014 - Conference Programme.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  51. Published

    Bruchmechanische Methoden zur Abschätzung der Lebensdauer von thermoplastischen Rohrwerkstoffen

    Pinter, G., Frank, A. & Arbeiter, F., 2014, Tagungsband Polymertec 2014. p. 142-145

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    Challenges in measuring the degree of crosslinking of ethylene vinyl acetate

    Oreski, G., Rauschenbach, A., Hirschl, C., Neumaier, L., Kraft, M. & Pinter, G., 2014, 29th European Photovoltaic Solar Energy Conference. p. 1-8

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1...10 11 12 13 14 15 16 17 ...33 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101