Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

601 - 650 out of 1,629Page size: 50

Research output

  1. 2015
  2. Published

    Secondary Crack Formation as Fracture Mechanism in Nanocomposites of Epoxy and Fullerene-Like WS2

    Haba, D., Barbezat, M. & Brunner, A. J., 22 Aug 2015, PROCEEDINGS OF THE INTERNATIONAL CONFERENCE NANOMATERIALS: APPLICATIONS AND PROPERTIES : NAP-2015. Sumy / Ukraine: Sumy State University, Vol. 4 / 2. 3 p. 02NNSA03

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  3. Published

    Silicon-based mercaptans: High-performance monomers for thiol-ene photopolymerization

    Roth, M., Oesterreicher, A., Mostegel, F., Moser, A., Pinter, G., Edler, M., Piock, R. & Grießer, T., 17 Aug 2015, In: Journal of polymer science : A, Polymer chemistry. 54, 3, p. 418-424 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    INFLUENCE OF MEAN STRESS AND WELD LINES ON THE FATIGUE BEHAVIOUR OF SHORT FIBRE REINFORCED POLYAMIDE

    Primetzhofer, A., Pinter, G. & Mösenbacher, A., 24 Jul 2015.

    Research output: Contribution to conference › Presentation › Research

  5. Published

    INFLUENCE OF MEAN STRESS AND WELD LINES ON THE FATIGUE BEHAVIOUR OF SHORT FIBRE REINFORCED POLYAMIDE

    Primetzhofer, A., Mösenbacher, A. & Pinter, G., 24 Jul 2015. 10 p.

    Research output: Contribution to conference › Paper

  6. Published

    Mode I, Mode II and Fixed Ratio Mixed Mode I/II Fatigue Delamination of Different Carbon Fibre Reinforced Composite Laminates

    Stelzer, S., Brunner, A. & Pinter, G., 22 Jul 2015.

    Research output: Contribution to conference › Presentation › Research

  7. Published

    Fatigue behaviour of composite-composite joints reinforced with cold metal transfer welded pins

    Stelzer, S., Ucsnik, S. & Pinter, G., 16 Jul 2015, In: International Journal of Fatigue. 81.2015, December, p. 37-47 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  8. Published

    Fatigue delamination growth in CFRP composites: Fixed Ratio Mixed Mode I/II compared with Mode I and Mode II

    Stelzer, S., Pinter, G., Brunner, A. & Terrasi, G. P., 1 Jul 2015.

    Research output: Contribution to conference › Poster › Research

  9. Published

    Stiffness and strength based modelsfor the fatigue-life predictionof continuously fiber reinforced composites

    Pinter, G. & Maier, J., 1 Jul 2015.

    Research output: Contribution to conference › Presentation › Research

  10. Published

    Characterization of the mechanical and fatigue behavior of braided composites made of twisted yarns

    Wolfahrt, M., Grosser, J., Fleischmann, M., Schubert, M. & Pinter, G., Jul 2015, Materials Science Forum. Vol. 825-826.2015. p. 876-882 7 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  11. Published

    Composite-Composite Joining with through the Thickness Reinforcements for Enhanced Damage Tolerance

    Stelzer, S., Ucsnik, S. & Pinter, G. G., Jul 2015, Materials Science Forum. Vol. 825-826.2015. p. 883-890 10 p. (Materials Science Forum).

    Research output: Chapter in Book/Report/Conference proceeding › Chapter › Research

  12. Published

    Mode I, Mode II and Fixed Ratio Mixed Mode I/II fatigue delamination of different carbon fiber reinforced composite laminates

    Stelzer, S., Brunner, A. & Pinter, G., Jul 2015, Proceedings of the 20th International Conference on Composite Materials. Coopenhagen, 7 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  13. Published

    Computational fatigue life prediction of continuously fibre reinforced multiaxial composites

    Maier (Brunbauer), J., Gaier, C. & Pinter, G., 20 Jun 2015, In: Composites Part B: Engineering. 80.2015, October, p. 269-277 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  14. Published

    Analyses of viscoelastic solid polymers undergoing degradation

    Davoodi, B., Muliana, A., Tscharnuter, D. & Pinter, G., 15 Jun 2015, In: Mechanics of time-dependent materials. 19.2015, 3, p. 397-417 21 p.

    Research output: Contribution to journal › Article › Research › peer-review

  15. Published

    Photocleavable epoxy based materials

    Radl, S. V., Kreimer, M., Manhart, J., Grießer, T., Moser, A., Pinter, G., Kalinka, G., Kern, W. & Schlögl, S., 15 Jun 2015, In: Polymer. 2015, Vol.69, July, p. 159-168

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Lightweight Design with Fibre Reinforced Polymers: Optimized and Reliable Components via Flexible Material Architecture

    Pinter, G. & Maier, J., 10 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  17. Published

    Material Modelling for Fatigue Life Calculation of Short Fibre Reinforced Injection Moulded Parts with FEMFAT

    Mösenbacher, A., Primetzhofer, A., Pichler, P., Koblmiller, T., Maier, J. & Pinter, G., 10 Jun 2015.

    Research output: Contribution to conference › Presentation › Research

  18. Published

    Material Modelling for Fatigue Life Calculation of Short Fibre Reinforced Injection Moulded Parts with FEMFAT

    Mösenbacher, A., Primetzhofer, A., Pichler, P., Koblmiller, T., Maier, J. & Pinter, G., 10 Jun 2015, 10th International FEMFAT User Meeting 2015 HANDOUT: Ligthweight Design and New Materials. Steyr, 28 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  19. Published

    Cyclic tests on cracked round bars as a quick tool to assess the long term behaviour of thermoplastics and elastomers

    Arbeiter, F., Schrittesser, B., Frank, A., Berer, M. & Pinter, G., 3 Jun 2015, In: Polymer Testing. 45, p. 83-92 10 p., 4441.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Short-term and long-term behavior of PP-polymer nanocomposites produced by injection molding compounding

    Battisti, M. G., Guttmann, P., Chitu, L. & Friesenbichler, W., 22 May 2015, Proceedings of PPS-30: The 30th International Conference of the Polymer Processing Society - Conference Papers. Vol. 1664. 700041

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  21. Published

    Damage propagation in reinforced pipe grade polypropylene under fatigue loads

    Arbeiter, F., Schwab, M., Pinter, G. & Frank, A., 21 May 2015.

    Research output: Contribution to conference › Poster › Research

  22. Published

    Investigation of interface properties of polypropylene multi-layer pipes via Raman-spectroscopy and X-ray scattering techniques

    Feuchter, M., Bruckmoser, K., Arbeiter, F. & Pinter, G., 21 May 2015.

    Research output: Contribution to conference › Poster › Research

  23. Published

    Effect of processing conditions on crystallization behavior and mechanical properties of poly(lactic acid) staple fibers

    Bruckmoser, K. & Resch, K., 20 May 2015, In: Journal of Applied Polymer Science. 132.2015, 33

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Nanocomposite Hydrogels - Towards Understanding Origins of Extraordinary high Fracture Toughness

    Klein, A., Whitten, P. G., Resch, K. & Pinter, G., 15 May 2015, Danube Vltava Sava Polymer Meeting - DVSPM 2015: Proceedings of a Conference on Polymer Science.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  25. Published

    Correlation between Rheotens measurements and reinforcement of polymer nanocomposites in the injection molding compounder

    Battisti, M. G., Friesenbichler, W., Duretek, I. & Guttmann, P., 15 Apr 2015, In: Journal of physics / Conference series. 602, 1, 012012.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Anwendung bruchmechanischer Methoden zur Lebensdauerabschätzung von Kunst- und Verbundwerkstoffen

    Pinter, G., 9 Apr 2015.

    Research output: Contribution to conference › Presentation › Research

  27. Published

    Beschleunigte Werkstoffqualifizierung mit dem zyklischen CRB-Test

    Frank, A., Berger, I., Arbeiter, F. & Pinter, G., Apr 2015, In: 3 R. 04-05 2015, p. 74-80

    Research output: Contribution to journal › Article › Research

  28. Published

    Material fatigue models and design methodology for short fibre reinforced polymers based on damage accumulation hypothesis

    Pinter, G., 31 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  29. Published

    Material fatigue models and design methodology for short fibre reinforced polymers based on damage accumulation hypothesis

    Pinter, G., Mösenbacher, A., Maier, J., Primetzhofer, A. & Guster, C., 31 Mar 2015, Proceedings 16th International Conference on Deformation Yield and Fracture of Polymers.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  30. Published

    Linear elastic fracture mechanics: a useful tool for lifetime estimation of structures made from thermoplastic polymers

    Arbeiter, F., Berer, M. & Pinter, G., 30 Mar 2015.

    Research output: Contribution to conference › Poster › Research

  31. Published

    New elastomers based on polyurethanes

    Ziegler, W., Winter, J. (Co-editor), Rieß, G., Kopeinig, S. (Co-editor), Dietrich, M. (Co-editor), Resch-Fauster, K. (Co-editor), Kern, W. (Co-editor) & Pinter, G. (Co-editor), 9 Mar 2015.

    Research output: Contribution to conference › Poster › Research › peer-review

  32. Published

    Simulation von Delamination in Mehrschichtverbunden

    Fuchs, P., Stelzer, S., Fellner, K., Pothukuchi, H. K. R. & Pinter, G., 5 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  33. Published

    Rayleigh-Taylor Instability Analysis at Biobased Composite Interfaces

    Wool, R., Su, X. & Resch, K., 4 Mar 2015.

    Research output: Contribution to conference › Presentation › Research

  34. Published

    Thoughts on accounting for the scatter seen in delamination growth

    Jones, R., Mujtaba, A., Kinloch, A., Brunner, A. & Stelzer, S., 23 Feb 2015.

    Research output: Contribution to conference › Presentation › Research

  35. E-pub ahead of print

    Effects of mean stress and fibre volume content on the fatigue-induced damage mechanisms in CFRP

    Maier, J. & Pinter, G., 7 Feb 2015, (E-pub ahead of print) In: International Journal of Fatigue. 75.2015, June, p. 28-38 11 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. Published

    Circulating microparticles carry oxidation-specific epitopes and are recognized by natural IgM antibodies

    Tsiantoulas, D., Perkmann, T., Afonyushkin, T., Mangold, A., Prohaska, T. A., Papac-Milicevic, N., Millischer, V., Bartel, C., Hörkkö, S., Boulanger, C. M., Tsimikas, S., Fischer, M. B., Witztum, J. L., Lang, I. M. & Binder, C. J., Feb 2015, In: Journal of lipid research. 56.2015, 2, p. 440-448 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Acetic Acid Transmission Rates of PV Backsheets

    Oreski, G., Brasch, M., Mihaljevic, A., Hirschl, C. & Pinter, G., 2015.

    Research output: Contribution to conference › Poster › Research

  38. Published

    Bioplastics for Solar Thermal Applications: Potential of Bio-PE and PTT for Swimming Pool Solar Collectors

    Klein, A., Resch, K. & Oreski, G., 2015, ANTEC 2015: conference proceedings ; ... annual technical conference & exhibition . Brookfield , Vol. 2015. p. 200-204 5 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  39. Published

    Characterisation of Chemical Ageing Processes in Encapsulant Materials Used in PV Modules

    Wagner, F., 2015, 107 p.

    Research output: Thesis › Master's Thesis

  40. Published

    Characterization and optimization of polymer membranes for acoustic applications

    Knapp, G., 2015

    Research output: Thesis › Doctoral Thesis

  41. Published

    curing kinetics investigations on nanoparticle reinforced epoxy-anhydride systems

    Moser, A., Feuchter, M., Wanner, A. J., Kern, W. & Pinter, G., 2015, EPF 2015 - Book of abstracts.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  42. Published

    Degradation of photovoltaic backsheets: Comparison of the aging induced changes on module and component level

    Knausz, M., Oreski, G., Eder, G. C., Voronko, Y., Duscher, B., Koch, T., Pinter, G. & Berger, K. A., 2015, In: Journal of Applied Polymer Science. 132, 24, 42093.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    Development and Implementation of an Accelerated Method for Chlorine Dioxide Exposure

    Bredacs, M., Redhead, A., Frank, A., Bastero, A. & Pinter, G., 2015, Proceedings PPS 15.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  44. Published

    Development of Ring on Disc Tests for Elastomeric Sealing Materials

    Hausberger, A., Grün, F., Godor, I., Pinter, G. & Schwarz, T., 2015, Proceedings of the International Tribology Conference 2015.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  45. Published

    Dispersion of fullerene-like WS2 nanoparticles within epoxy and the resulting fracture mechanics

    Haba, D., Brunner, A. & Pinter, G., 2015, In: Composites science and technology. 119.2015, 23 November, p. 55-61 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Dynamic Mechanical Profile of Polyketone Compared to Conventional Technical Plastics

    Pilz, G. & Guttmann, P., 2015, Polymer Processing Society Graz 2015, Book of Abstracts. p. 110 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  47. Published

    Dynamic Mechanical Profile of Polyketone Compared to Conventional Technical Plastics

    Pilz, G., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  48. Published

    Efficient test methodology for mechanical characterization of structural polymers under media influence

    Pilz, G., 2015, Proceedings of Danube Vltava Sava Polymer Meeting - DVSPM 2015. p. 78 1 p.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  49. Published

    Efficient test methodology for mechanical characterization of structural polymers under media influence

    Pilz, G., 2015.

    Research output: Contribution to conference › Presentation › Research › peer-review

  50. Published

    Eigenspannungsanalyse und Schädigungsverhalten von verstärkten Polypropylen-Rohrwerkstoffen

    Schwab, M., 2015

    Research output: Thesis › Master's Thesis

  51. Published

    Einfluss der Faserarchitektur auf die mechanischen Eigenschaften und die Schadenstoleranz von Geflechtlaminaten

    Berger, I. J., 2015

    Research output: Thesis › Master's Thesis

Previous 1...9 10 11 12 13 14 15 16 ...33 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101