Chair of Materials Science and Testing of Polymers (210)

Organisational unit: Chair

1 - 50 out of 1,629Page size: 50

Research output

  1. 2025
  2. Published

    Exploring Nanoparticle and Thin Film Bonding Characteristics onto Carbon Fibers using Atomic Force Microscopy

    Haiden, L., Feuchter, M., Kratzer, M., Brunner, A. J., Pansare, A. V., Barbezat, M. & Pinter, G., 25 Mar 2025.

    Research output: Contribution to conference › Poster › Research

  3. Published

    The Fossil, the Green, and the In-Between: Life Cycle Assessment of Manufacturing Composites with Varying Bio-Based Content

    Kirschnick, U., Ravindran, B., Sieberer, M., Fauster, E. & Feuchter, M., 20 Feb 2025, In: Journal of composites science. 9.2025, 3, 18 p., 93.

    Research output: Contribution to journal › Article › Research › peer-review

  4. Published

    A New Approach Using Multi-Layer Films from Food Waste as a Shrink Film

    Plevová, K., Feuchter, M., Wild, N. & Resch-Fauster, K., 17 Feb 2025, In: Processes. 13.2025, 2, 16 p., 560.

    Research output: Contribution to journal › Article › Research › peer-review

  5. Published

    Tailored Recycled Composites: Enhancing the Performance of Injection Moulded Post-Consumer Polypropylene Composites Using Box-Behnken Design

    Shahroodi, Z., Zidar, D., Momeni, V., Arbeiter, F., Duretek, I., Krempl, N., Berger-Weber, G. & Holzer, C., 15 Feb 2025, In: Polymer Testing. 144.2025, March, 13 p., 108743.

    Research output: Contribution to journal › Article › Research › peer-review

  6. Published

    Effect of Encapsulant Degradation on Photovoltaic Modules Performances Installed in Different Climates

    Barretta, C., Macher, A., Köntges, M., Ascencio-Vasquez, J., Topic, M. & Oreski, G., 9 Jan 2025, In: IEEE Journal of Photovoltaics. 15.2025, 2, p. 290-296 7 p.

    Research output: Contribution to journal › Article › Research › peer-review

  7. Published

    Very high cycle fatigue properties of short glass fiber reinforced polyetheretherketone (PEEK)

    Fitzka, M., Stadler, G., Schönbauer, B. M., Pinter, G. & Mayer, H., Jan 2025, In: International Journal of Fatigue. 190.2025, January, 8 p., 108652.

    Research output: Contribution to journal › Article › Research › peer-review

  8. 2024
  9. Published

    Strain rate-dependent failure modes of material extrusion-based additively manufactured PETG: A study on crack deflection and penetration

    Waly, C., Schulnig, S. & Arbeiter, F., 18 Dec 2024, In: Theoretical and Applied Fracture Mechanics. 136.2025, April, 15 p., 104834.

    Research output: Contribution to journal › Article › Research › peer-review

  10. Published

    Deformation and fracture of lithosphere-inspired polymeric multi-layer composites

    Waly, C., Höller, R., Griesser, T. & Arbeiter, F., Dec 2024, In: Results in Engineering. 24.2024, December, 9 p., 103519.

    Research output: Contribution to journal › Article › Research › peer-review

  11. Published

    Data-driven evaluation of the Paris’ law parameters in polyethylene pipe grades — Increasing the precision of fracture mechanical lifetime estimation

    Messiha, M., Wiener, J., Arbeiter, F. & Pinter, G., 25 Nov 2024, In: Engineering Fracture Mechanics. 311.2024, 25 November, 18 p., 110540.

    Research output: Contribution to journal › Article › Research › peer-review

  12. Published

    Polyethylene pipes for distribution of gaseous hydrogen

    Arbeiter, F., Bredács, M., Fechtig, D. & Bradler, P., 22 Nov 2024, p. 1. 6 p.

    Research output: Contribution to conference › Paper

  13. Published

    Christian Doppler Laboratory for Impact of Recycled Materials on the mechanical lifetime estimation of polymers

    Maurer, C., Zach, D., Travnicek, L. & Arbeiter, F., 21 Nov 2024, p. 1-1.

    Research output: Contribution to conference › Poster › Research

  14. Published

    Numerical simulation of non-pressure polypropylene pipes in underground operating conditions

    Travnicek, L., Arbeiter, F. & Poduška, J., 21 Nov 2024, p. 1. 1 p.

    Research output: Contribution to conference › Poster › Research

  15. Published

    Enhanced hydrogen gas barrier properties in highly filled acrylonitrile butadiene rubber with high aspect ratio filler

    Clute, C., Hafner, T., Balasooriya, W., Kaiser, A., Pinter, G. & Schlögl, S., 19 Nov 2024, In: International Journal of Hydrogen Energy. 91.2024, 19 November, p. 404-411 8 p.

    Research output: Contribution to journal › Article › Research › peer-review

  16. Published

    Investigating the influence of bending stiffness and processing parameters on single-leg bending geometries of additively manufactured composites

    Stiller, T., Kerschbaumer, R. C., Waly, C., Zink, B., Slapnik, J. & Pinter, G., 30 Oct 2024, In: Results in Engineering. 24.2024, December, 10 p., 103276.

    Research output: Contribution to journal › Article › Research › peer-review

  17. Published

    Efficient surface defect detection in industrial screen printing with minimized labeling effort

    Krassnig, P. J., Haselmann, M., Kremnitzer, M. & Gruber, D. P., 18 Oct 2024, In: Integrated computer-aided engineering. 32.2025, 1, p. 1-21 21 p.

    Research output: Contribution to journal › Article › Research › peer-review

  18. Published

    Effect of Epoxy Chain Extender and Multiple Processing on Poly-(R)-3-Hydroxybutyrate’s Properties

    Hinterberger, K., Main, P., Waly, C. & Lucyshyn, T., 4 Oct 2024, In: Journal of polymers and the environment. 33.2025, January, p. 112-124 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  19. Published

    Synthesis and Characterization of Rebondable Polyurethane Adhesives Relying on Thermo-Activated Transcarbamoylation

    Bautista-Anguís, D., Reiner, L., Röper, F., Maar, S., Wolfahrt, M., Wolfberger, A. & Schlögl, S., 3 Oct 2024, In: Polymers. 16.2024, 19, 13 p., 2799.

    Research output: Contribution to journal › Article › Research › peer-review

  20. Published

    Characterisation of the Mechanical Properties of Natural Fibre Polypropylene Composites Manufactured with Automated Tape Placement

    Legenstein, A., Haiden, L., Feuchter, M. & Fauster, E., 1 Oct 2024, In: Journal of composites science. 8.2024, 10, 21 p., 396.

    Research output: Contribution to journal › Article › Research › peer-review

  21. Published

    Investigating the impact of manufacturing conditions on crack growth rate in nitrile butadiene rubber for enhanced service life – Part 02: Crosslink density via multi-stage swelling analysis

    Gehling, T., Kerschbaumer, R. C., Pinter, G., Fasching, M. A., Schwarz, T. & Schieppati, J., 26 Sept 2024, In: Polymer. 312.2024, 24 October, 12 p., 127661.

    Research output: Contribution to journal › Article › Research › peer-review

  22. Published

    Three-dimensional mechanical metamaterial with tunable engineering constants in a broad range

    Fleisch, M., Pinter, G., Schlögl, S. & Berer, M., 5 Sept 2024, In: Results in Engineering. 23.2024, September, 4 p., 102860.

    Research output: Contribution to journal › Article › Research › peer-review

  23. Published

    Fatigue investigations of elastomers developed for high-pressure hydrogen gas environments

    Schieppati, J., Balasooriya, W., Huber, P. A. H. & Pinter, G., 19 Aug 2024, In: International Journal of Fatigue. 189.2024, December, 10 p., 108563.

    Research output: Contribution to journal › Article › Research › peer-review

  24. Published

    Waste-to-Value Feasibility Study: Assessing the Viability and Quality of Incorporating Different Postindustrial Glass-Fiber Composites into Postconsumer Recycled Polypropylene

    Shahroodi, Z., Krempl, N., Zidar, D., Mayrhofer, T., Kirschnick, U., Arbeiter, F., Duretek, I. & Holzer, C., 7 Aug 2024, In: ACS Sustainable Chemistry and Engineering. 12.2024, 33, p. 12619-12631 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  25. Published

    Manufacturing bio-based fiber-reinforced polymer composites: Process performance in RTM and VARI processes

    Kirschnick, U., Feuchter, M., Ravindran, B., Salzmann, M., Duretek, I., Fauster, E. & Schledjewski, R., 19 Jul 2024, In: Advanced Manufacturing: Polymer and Composites Science. 10.2024, 1, 12 p., 2379205.

    Research output: Contribution to journal › Article › Research › peer-review

  26. Published

    Kontinuierliches Trennen eines Kunststoffgemisches

    Franz, G. (Inventor), Michael, F. (Inventor) & Nadine, W. (Inventor), 15 Jun 2024, IPC No. B29B 17/ 02 A N, Patent No. AT526713, Priority date 29 Nov 2022, Priority No. AT20220050907

    Research output: Patent

  27. Published

    Multi-Material 3D Printing of Biobased Epoxy Resins

    Bergoglio, M., Rossegger, E., Schlögl, S., Griesser, T., Waly, C., Arbeiter, F. & Sangermano, M., 27 May 2024, In: Polymers. 16.2024, 11, 18 p., 1510.

    Research output: Contribution to journal › Article › Research › peer-review

  28. Published

    An Investigation on The Effects of Post-industrial Glass Fiber Flakes on the Properties of Recycled Polypropylene

    Raguz, I., Shahroodi, Z., Krempl, N., Arbeiter, F., Friesenbichler, W. & Holzer, C., 23 May 2024.

    Research output: Contribution to conference › Paper › peer-review

  29. Published

    Feasibility study on the production of low melt flow rate recycled polypropylene from postconsumer waste

    Geier, J., Barretta, C., Hinczica, J., Haar, B., Bredács, M., Witschnigg, A., Mayrbäurl, E. & Oreski, G., 15 May 2024, In: Journal of applied polymer science. 141.2024, 30, 14 p., e55694.

    Research output: Contribution to journal › Article › Research › peer-review

  30. Published

    Multi-Material Implant Structures with Medical-Grade Polyurethane via Additive Manufacturing

    Hentschel, L., Petersmann, S., Gradischar, A., Lebschy, C., Lindenmann, J., Smolle-Juettner, F., Gonzalez-Gutierrez, J., Dias, A., Kynast, F., Hammer, N., Schäfer, U. & Holzer, C., 8 May 2024, In: AIP Conference Proceedings. 3158, 1, 150005.

    Research output: Contribution to journal › Conference article › peer-review

  31. E-pub ahead of print

    Morphological structure and mechanical properties of a nucleated Polyoxymethylene (POM) homopolymer resin processed under conventional injection molding conditions

    Schrank, T., Ramoa, B., Feuchter, M., Pinter, G., Pantani, R. & Berer, M., 7 May 2024, (E-pub ahead of print) In: Polymer Testing. 134.2024, May, 13 p., 108444.

    Research output: Contribution to journal › Article › Research › peer-review

  32. E-pub ahead of print

    Laser-induced graphene formation on different wood species: Dependence of electronic performance on intrinsic features of certain types of wood

    Lengger, S. K., Neumaier, L., Haiden, L., Feuchter, M., Griesser, T. & Kosel, J., 4 May 2024, (E-pub ahead of print) In: Sustainable Materials and Technologies. 40.2024, July, 11 p., e00936.

    Research output: Contribution to journal › Article › Research › peer-review

  33. E-pub ahead of print

    Design of Reversible Adhesives by Using a Triple Function of Ionic Liquids

    Wanghofer, F., Kriehuber, M., Reisinger, D., Floh, F., Wolfahrt, M. & Schlögl, S., 2 May 2024, (E-pub ahead of print) In: Macromolecular materials and engineering. 309.2024, 9, 9 p., 2400011.

    Research output: Contribution to journal › Article › Research › peer-review

  34. Published

    Reducing part deformation of isotactic polypropylene specimens fabricated with powder bed fusion technique through controlling crystallization behaviors

    Gao, X., Guo, J., Zhang, D., Li, J., Su, Y., Arbeiter, F. & Li, H., 24 Apr 2024, In: Journal of polymer science. 62.2024, 13, p. 3025-3037 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  35. E-pub ahead of print

    Morphological investigations on silica and carbon-black filled acrylonitrile butadiene rubber for sealings used in high-pressure H2 applications

    Clute, C., Balasooriya, W., Cano Murillo, N., Theiler, G., Kaiser, A., Fasching, M., Schwarz, T., Hausberger, A., Pinter, G. & Schlögl, S., 23 Apr 2024, (E-pub ahead of print) In: International Journal of Hydrogen Energy . 67.2024, 20 May, p. 540-552 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  36. E-pub ahead of print

    MetamaterialFinder: A software framework for discovering and analyzing mechanical metamaterials based on simple closed curves

    Fleisch, M., Thalhamer, A., Schlögl, S., Fuchs, P. F., Pinter, G. & Berer, M., 2 Apr 2024, (E-pub ahead of print) In: Advances in Engineering Software. 192.2024, June, 18 p., 103626.

    Research output: Contribution to journal › Article › Research › peer-review

  37. Published

    Investigation into the state of cure of elastomers through nanoindentation

    Schieppati, J., Gehling, T., Azevedo, M., Kerschbaumer, R. C., Christöfl, P., Oreski, G., Fasching, M. A., Schwarz, T. & Pinter, G., 1 Apr 2024, In: Polymer Testing. 133.2024, April, 9 p., 108417.

    Research output: Contribution to journal › Article › Research › peer-review

  38. Published

    Dual-Wavelength Vat Photopolymerization 3D Printing with Hybrid Acrylate-Epoxy Resins: Influence of Resin Composition on Microstructure and Mechanical Properties

    Cazin, I., Plevová, K., Alabiso, W., Vidović, E. & Schlögl, S., Apr 2024, In: Advanced Engineering Materials. 26.2024, 8, 12 p., 2301699.

    Research output: Contribution to journal › Article › Research › peer-review

  39. Published

    Impact Characteristics and Repair Approaches of Distinct Bio-Based Matrix Composites: A Comparative Analysis

    Ravindran, B., Agathocleous, T., Oswald-Tranta, B., Fauster, E. & Feuchter, M., 29 Mar 2024, In: Journal of composites science. 8.2024, 4, 20 p., 126.

    Research output: Contribution to journal › Article › Research › peer-review

  40. Published

    Shape or size matters? Towards standard reporting of tensile testing parameters for human soft tissues: systematic review and finite element analysis

    Lin, A. C., Pirrung, F., Niestrawska, J. A., Ondruschka, B., Pinter, G., Henyš, P. & Hammer, N., 26 Mar 2024, In: Frontiers in Bioengineering and Biotechnology. 12.2024, 1368383.

    Research output: Contribution to journal › Review article › peer-review

  41. Published

    Prospects in the application of a frontally curable epoxy resin for cured-in-place-pipe rehabilitation

    Malik, M. S., Wolfahrt, M., Domínguez Pardo, J. J., Bublitz, D. & Schlögl, S., 5 Mar 2024, In: Journal of applied polymer science. 141.2024, 9, 13 p., e55024.

    Research output: Contribution to journal › Article › Research › peer-review

  42. Published

    Effect of different weft-knitted structures on the mechanical performance of bio-based flexible composites

    Schwaiger, M., Bender, M., Schirmer, H., Taesler, J., Feuchter, M. & Resch-Fauster, K., Mar 2024, In: Composites Part C: Open Access. 13.2024, March, 11 p., 100436.

    Research output: Contribution to journal › Article › Research › peer-review

  43. Published

    UV lamp spectral effects on the aging behavior of encapsulants for photovoltaic modules

    Heidrich, R., Barretta, C., Mordvinkin, A., Pinter, G. G., Oreski, G. & Gottschalg, R., Mar 2024, In: Solar energy materials and solar cells. 266.2024, March, 17 p., 112674.

    Research output: Contribution to journal › Article › Research › peer-review

  44. Published

    Thermally-activated locomotion of a bilayer polymer actuator

    Fedoryak, A. N., Doroshenko, T. P., Golenkov, O. G., Kratzer, M., Huszar, M., Plevová, K., Haiden, L., Teichert, K. C. & Dimitriev, O. P., 24 Feb 2024, In: Smart Materials in Manufacturing. 2.2024, 12 p., 100047.

    Research output: Contribution to journal › Article › Research › peer-review

  45. Published

    Redox cationic frontal polymerization: a rapid curing approach for carbon fiber-reinforced composites with high fiber content

    Malik, M. S., Wolfahrt, M., Pinter, G. & Schlögl, S., 22 Feb 2024, In: Monatshefte fur Chemie. 155.2024, 2, p. 205-217 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  46. Published

    Tensile properties of flexible composites with knitted reinforcements from various yarn materials

    Schwaiger, M., Röper, F., Wolfahrt, M., Taesler, J., Schirmer, H., Salzmann, M., Feuchter, M. & Resch-Fauster, K., 20 Feb 2024, In: Polymer Composites. 45.2024, 3, p. 2602-2614 13 p.

    Research output: Contribution to journal › Article › Research › peer-review

  47. Published

    Rapid tooling for rubber extrusion molding by digital light processing 3D printing with dual curable vitrimers

    Höller, R., Hrbinič, K., Reisinger, D., Alabiso, W., Schuschnigg, S., Fleisch, M., Waly, C., Rossegger, E. & Schlögl, S., 19 Feb 2024, In: Applied research. 3.2024, 4, 10 p., e202300133.

    Research output: Contribution to journal › Article › Research › peer-review

  48. Published

    Characterization of fracture behavior under impact-like loading conditions of elastomeric grades for high-pressure gas applications

    Balasooriya, W., Kaiser, A., Fasching, M., Hausberger, A., Schwarz, T. & Pinter, G. G., 16 Feb 2024, In: Polymer. 294.2024, 16 February, 12 p., 126718.

    Research output: Contribution to journal › Article › Research › peer-review

  49. Published

    Analysis of different polypropylene waste bales: Evaluation of the source material for PP recycling

    Geier, J., Bredács, M., Witschnigg, A., Vollprecht, D. & Oreski, G., 6 Feb 2024, In: Waste Management and Research. 42.2024, 9, p. 767-775 9 p.

    Research output: Contribution to journal › Article › Research › peer-review

  50. Published

    A characterization program for cell spacer materials: unveiling key performance parameters for advanced battery stack assemblies

    Liu, D. T., 2024

    Research output: Thesis › Master's Thesis

  51. Published

    Acoustic Emission based determination of delamination initiation in GFRP laminates

    Brunner, A. J., Koss, V., Gfrerrer, M. & Pinter, G., 2024, Proceedings of the 36th Conference of the European Working Group on Acoustic Emission.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  52. Published

    AE based crack size estimates from delamination propagation in fiber reinforced thermoset composites

    Gfrerrer, M., Koss, V., Pinter, G. & Brunner, A. J., 2024, Proceedings of the 36th Conference of the European Working Group on Acoustic Emission.

    Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Previous 1 2 3 4 5 6 7 8 ...33 Next
View graph of relations

Contact information

Otto Glöckel-Straße 2/II, 8700 Leoben
  • Main phone number: +43 3842 402 2101